Develop Bugs

i780 NO Call waiting tone with HC4 ROM?

I completely flash the 3in1 HC4 ROM yesterday,
but i found that there is no call waiting tone for incoming call when i talking phone with other people.
Anyone have the same issue? or the setting in my phone was wrong ?
I am using the PCCW 3G network in Hong Kong and the operation setting in phone is used "XL"
Thanks

simdao said:
I completely flash the 3in1 HC4 ROM yesterday,
but i found that there is no call waiting tone for incoming call when i talking phone with other people.
Anyone have the same issue? or the setting in my phone was wrong ?
Click to expand...
Click to collapse
Just checked that - it's ok on mine, there is a repeating tone during the call for call waiting.
phone/pda rom i780DXHC4

I disable and re-enable the call waiting option, but it still no call waiting tone.

simdao said:
I disable and re-enable the call waiting option, but it still no call waiting tone.
Click to expand...
Click to collapse
Stupid question maybe, but you do see the incoming call on the screen right?
are you able to switch to it?
maybe it's a SIM or provider issue

Finally perform a hard reset to solve the problem

I used to have the same issue, missed couple of call....on c1...
I managed to figure out, the problem is the callwait.mid does exist but it was a silent midi....
Just fire up registry editor, go to HKEY_CURRENT_USER\ControlPanel\Sounds\CallWaiting
change the sound value from callwait.mid value to callwait.wav...
and you can add vibrate by modify the script to av0pw3r,...
btw, no soft reset required....

eranro said:
Stupid question maybe, but you do see the incoming call on the screen right?
are you able to switch to it?
maybe it's a SIM or provider issue
Click to expand...
Click to collapse
the callwaiting was enable and i can see the incoming call show on screen.
Finally
Thanks for "Crash74" i added vibration and change the tone

simdao said:
the callwaiting was enable and i can see the incoming call show on screen.
Finally
Thanks for "Crash74" i added vibration and change the tone
Click to expand...
Click to collapse
Ironically, I encountered the same problem just today.
Thank you "Crash74" for solving this for me
This is strange though,
I don't remember having this problem when I first installed this rom (HD1),
but indeed the callwait.mid is silent (as is the busy.mid).
Could it have changed on its own somehow?

crash74 said:
I used to have the same issue, missed couple of call....on c1...
I managed to figure out, the problem is the callwait.mid does exist but it was a silent midi....
Just fire up registry editor, go to HKEY_CURRENT_USER\ControlPanel\Sounds\CallWaiting
change the sound value from callwait.mid value to callwait.wav...
and you can add vibrate by modify the script to av0pw3r,...
btw, no soft reset required....
Click to expand...
Click to collapse
Thanks, Crash74. I can hear beep tone now. But, how to make the call waiting alert ring continuously like other phones? It beeps 4 times only.

i have the same problem too, and i checked and found that it is callwait.wav already....so, i think that may be i deleted it(i have no idea), can anyone send the file to me
[email protected]
and please tell me where should i put it.
another pt. is when i called htc centre and they told me that "ALL VERSION" of diamond will have his problem if you use BT, and if you want to solve it then you need to turn off BT and soft reset it. But this seems can't solve my problem

Phone does not ring sometimes?

At first I thought the rom I flashed on my GS2X was screwed so I flashed a stock rom and found the same was happening. Sometimes when a call comes in the phone does not ring and appears to be in silent mode when it is not?
Anyone know of some 'feature' that may be causing this?

jets76 said:
At first I thought the rom I flashed on my GS2X was screwed so I flashed a stock rom and found the same was happening. Sometimes when a call comes in the phone does not ring and appears to be in silent mode when it is not?
Anyone know of some 'feature' that may be causing this?
Click to expand...
Click to collapse
You could try something, and I know itl sound weird but,
Change your ringtone, I had it happen to me a few times when I tested some of the roms on here..
That usually helped for me.
Or simply to you have motion on? Lol if so turning it upside down mutes it lmfao
Go to settings>MOTION>turn over to mute xD
And if that is it, I'm not gonna pick on ye, my buddy was wining about the same thing couple months ago n it was that, he got it for a few weeks.. I had my fun..

Thanks. I use phoneweaver to automatically change ringers and volume levels based on location etc and I think the settings aren't 'sticking' properly. I have never had issues until now on this phone. I noticed when this app changes the screen brightness even though the new value is shown in settings it has not actually changed. Maybe the same thing was happening on the ringer? The last time a call came in with no ring I quickly rebooted without changes and it rang when I called the phone so who knows...
I'll test further.

[Black Notes Hybrid 2nd Gen] Vibrate & Sound Problem

Hello Rio,
I've tried black notes hybrid 2nd gen for almost a week.
Very amazed by the performance at the start.
And then i realize that my phone is not vibrate when there is notification.
And notification sound is also very weak.
Any solution to this problem?

terifish said:
Hello Rio,
I've tried black notes hybrid 2nd gen for almost a week.
Very amazed by the performance at the start.
And then i realize that my phone is not vibrate when there is notification.
And notification sound is also very weak.
Any solution to this problem?
Click to expand...
Click to collapse
trying to help.
Have you activate the vibration setting into always?

terifish said:
Hello Rio,
I've tried black notes hybrid 2nd gen for almost a week.
Very amazed by the performance at the start.
And then i realize that my phone is not vibrate when there is notification.
And notification sound is also very weak.
Any solution to this problem?
Click to expand...
Click to collapse
Try to manually configure them in settings (maybe the default settings caused the problems).Btw, I haven't encountered any issues with vibration and notification.

climbatiz3 said:
trying to help.
Have you activate the vibration setting into always?
Click to expand...
Click to collapse
yes, i do. i've tried in every possible combination in sound setting.
still no vibrate and the sound still very weak though i already max it.

terifish said:
yes, i do. i've tried in every possible combination in sound setting.
still no vibrate and the sound still very weak though i already max it.
Click to expand...
Click to collapse
Try to reflash the rom with full wipe data and cache. Do not restore any system apps.

please tell if u have solved the problem, im considering to flash black note too

Me too..no vabration

fazrin2211 said:
Me too..no vabration
Click to expand...
Click to collapse
+1

after doing some search, finally i know the solution..
so the problem is not in "black notes hybrid gen 2" rom, because after i reflash my phone with stock firmware i still get this problem (sorry for the title )..
it's about bug in the firmware that vibrate config in setting doesn't affect the notification vibrating.
so i get myself sound manager v2 (from market) and change the vibrate settings from there..
and "taadaa" my phone vibrate when there is message or any other notification

me too no vibration =(
I thought im alone
terifish said:
after doing some search, finally i know the solution..
so the problem is not in "black notes hybrid gen 2" rom, because after i reflash my phone with stock firmware i still get this problem (sorry for the title )..
it's about bug in the firmware that vibrate config in setting doesn't affect the notification vibrating.
so i get myself sound manager v2 (from market) and change the vibrate settings from there..
and "taadaa" my phone vibrate when there is message or any other notification
Click to expand...
Click to collapse
Thanks, you solve my problem
But my sound and vibrate still weak =(

[Q] Why can't I control my Desire's volume?

I'm really annoyed by the fact that I miss calls because the ringer volume was too low. But I have tried everything, and I mean everything, to try to correct that. You name the ringer volume locking app, I no doubt tried it. Tasker, etc. as well. None of them work at either locking the ringer volume at 100%, or raising it to 100% when a call comes in.
Since other people don't seem to have this problem.... I'm wonder, is it possible that the Manu kernel I install could be blocking something? Or what about the MIUI XJ ROM I got from here? Any other clues?!

When you're playing a music file without headphone, is the speaker giving loud sound then?
If yes, then your speaker is allright.
If no, plug in headphones and check the volume through your headphone. If the volume is also low there, then your amplifier is broken.

Cyanoid said:
I'm really annoyed by the fact that I miss calls because the ringer volume was too low. But I have tried everything, and I mean everything, to try to correct that. You name the ringer volume locking app, I no doubt tried it. Tasker, etc. as well. None of them work at either locking the ringer volume at 100%, or raising it to 100% when a call comes in.
Since other people don't seem to have this problem.... I'm wonder, is it possible that the Manu kernel I install could be blocking something? Or what about the MIUI XJ ROM I got from here? Any other clues?!
Click to expand...
Click to collapse
I use Volume Control app. But then again you said you tried every volume app there is.
Manu is not blocking anything as I've been with ManU kernel for a long while.
Try to change your ringtone. Some ringtones are louder than others.

Well, the problem has nothing to do with the choice of ringtone I'm using. If the volume is too low, I'm obviously not going to hear the phone, regardless of the volume of the ringtone.
TheRamon: I think you may have misunderstood the issue. It's not that the volume is low all the time. It's that it may have been turned down or off for various reasons, and I need the ringer vol to be 100% when a call comes in.
There are many apps that will do this, but absolutely none have worked properly on my Desire. So if we've ruled out the kernel, and others with Desires have managed to accomplish this through apps.... why am I not able to do the same?!
There is no particular indication anywhere that the phone is not working properly.

Have you ever flashed another rom to test?
via xda app

stankyou said:
Have you ever flashed another rom to test?
via xda app
Click to expand...
Click to collapse
No, I haven't. But that's because it's a big deal (for me, anyway) to do that. I have to go through hours and hours settings things back up similar to what I had. So I don't change ROMs too often. Truth be told, I never really had luck with any ringer volume lock app on the Desire, and that's 2 years looking. They all mess up in one way or another, making them unuseable. It's just that it seems to be even more the case since I installed MIUI XJ with the Manu kernel. But I don't know. There may be no connection. All I know is that other Desire users have no (or little) problems with the ringer lock apps and I do!

Cyanoid said:
No, I haven't. But that's because it's a big deal (for me, anyway) to do that. I have to go through hours and hours settings things back up similar to what I had. So I don't change ROMs too often. Truth be told, I never really had luck with any ringer volume lock app on the Desire, and that's 2 years looking. They all mess up in one way or another, making them unuseable. It's just that it seems to be even more the case since I installed MIUI XJ with the Manu kernel. But I don't know. There may be no connection. All I know is that other Desire users have no (or little) problems with the ringer lock apps and I do!
Click to expand...
Click to collapse
Im not really asking you to switch rom. What im saying is nandbackup your current rom and flash a different one. Check if the volume issues disappear or not. Since you are using an AOSP based rom, my suggestion is to flash a Sense based rom and see if the issue remains. At least you'll have an idea if its just a rom related issue or not and determine the next troubleshooting step from there. It will be difficult to find a solution if you don't try to isolate where the problem is coming from.
via xda app

Ok, I actually did switch ROMS.... I'm on the latest stock MIUI GB ROM for the Desire, after wiping everything, and all stock apps. I just downloaded and tried a couple of locking apps; Ring Lock, Smart Volume.... they don't work! Smart Volume buzzes when I change the volume, but it happily allows me to do so!
So now I'm wondering if its MIUI itself that is preventing volume locking. Yet I doubt it, because I think we'd have heard that from MIUI users. Each volume control app seems to have its own reason for not working. Some will lock volume settings with each other, but still allow you to change the ringer volume. Some will have dialog boxes go into an infinite loop if you try to change the ringer volume. Some will vibrate a notification when you change the ringer vol., but will still allow you to do so. Even in Tasker, I set a profile to change the brightness and the volume upon ring... it changes the brightness, but not the volume. Since each app has a different type of failure, one would logically conclude that it's the apps that are simply faulty.
But then there's the irrefutable fact that while some find these apps faulty (sometimes for the same reason I did), I'm guessing not everyone with a Desire has been unable to get the ringer volume to stay locked. So I still don't know if it's an inherent problem with the Desire. But if it's due to MIUI, I'll have to live with it. Because... I like MIUI a bit more than I hate the fact that I can't control the ringer volume!

Update: I just discovered this, so I've yet to confirm.... but I just tried an escalating ring app.... and it actually worked on my Desire. I left the phone on low, the app started low and took the volume to max. That means, the volume is/may be controllable on this device, by a 3rd party. Just before this, I started messing about in Superuser, looking at the tons of logs it creates. Turns out, by default, Superuser was not giving full permissions to my apps - specifically the right to make calls and related etc. I set all such.apps to full permissions.
I will try with a ring locker app tomorrow (but even the escalating ring app is actually perfect for my needs!)..

mic low input problem during call

hi to all,
i search everywhere and i flashed the phone around 15 times, just to see if its a rom problem.
i try all the cloudy'S stock rom but still the same.
so when i receive or i make a CALL i hear very well but the other person can't hear me,
to make it working i must activate the speaker option to communicate with the other person.
But as many people write here when we activate the speaker the second mic is activated but the lower mic is also in
good reception so maybe i must change something, somewhere???
please help me,thanks to all

Mine too... used to only be first call second would work... although now it is almost every call for me.
BTW, I have never had problems with bluetooth calls!
Although bluetooth works, it does not seem to be a hardware mic issue (like a dirty mic as some suggest), seems to be a codec bug. I'm pretty sure of it because I have call recording on my phone and my recorded voice (that no one can hear on my first call) is distorted like it is down converting my voice to only 4-12kbps.
I hope the ZVE update with HD voice will place a new codec in the phone dumping the buggy one.
Deciding to update to latest ZVE version to give it a try.... will try and let you know if it worked.

I've actually started having this problem as well, but I have never touched the software on the phone. Bone stock. I wonder if there is some systemic hardware issue with the mic.
Sent from my LG-LS980 using XDA Free mobile app

Fyi I factory reset my phone and it seems to have fixed the mic. Heavy price to pay for a non-rooted phone but at least my phone works as a phone again.
Sent from my LG-LS980 using XDA Free mobile app

Phone, menu, call settings, Enhanced voice, unchecked.
I feel the noise cancelation is too aggressive.

problems
lattisimo said:
Phone, menu, call settings, Enhanced voice, unchecked.
I feel the noise cancelation is too aggressive.
Click to expand...
Click to collapse
Hi my friends, i have this problem too, i purchased it and tryed all, soft and hardware, i get change the flex complete and nothing, i really apreciatte if someone solved the problem and help me do it too.

Nicodmus0024 said:
Hi my friends, i have this problem too, i purchased it and tryed all, soft and hardware, i get change the flex complete and nothing, i really apreciatte if someone solved the problem and help me do it too.
Click to expand...
Click to collapse
Can you post a screen shot of your Call Settings screen?
Phone, menu key, call settings.

lattisimo said:
Can you post a screen shot of your Call Settings screen?
Phone, menu key, call settings.
Click to expand...
Click to collapse
Here it is, sorry for the time to post.

Nicodmus0024 said:
Here it is, sorry for the time to post.
Click to expand...
Click to collapse
What build are you running?

lattisimo said:
What build are you running?
Click to expand...
Click to collapse
Here is a sreen shot of all info about soft

lattisimo said:
What build are you running?
Click to expand...
Click to collapse
Nothing yet my friend?

Your software appears different than mine. Is yours stock? If not, would you be willing to TOT back to stock to test if the issue remains?