Corrupt ROM on the Dash - HTC Excalibur

I recently tried the WM6.1 version on my dash and it worked fine. I actually flashed it twice with this update and I had no problems. So last night I decided to put the original update from t-mobile back on my phone and so I downloaded this update from their website and flashed it onto there with no problems. I waited a whole night and decided that I didn't like it as much as I like 6.1 so I decided to put that version back on and now whenever I get to the point where it is updating, it goes to about 3% and then my phone restarts and the program lets me know that the version of the ROM is corrupt. I've tried downloading a different copy of the same ROM but it still happens.
I'd like to know how to fix this so I could continue using wm6.1 in my phone.
Thanks!

You need to unlock your phone.
Follow the manual that is stickied in page 1

Related

Attempting to update 1 week old 8525 to ATT WM6 - Probs...

Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
JETninja said:
Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
Click to expand...
Click to collapse
Are you following the directions at THIS GUIDE . What ROM are you trying to put on there? Did you CID unlock the device? Are you running Vista? Do you have .NET 2.0 or 3.0 version?
That should be enough questions to get us started.
Did you read my title? This is the stock ATT WM6 that came out yesterday. No need to unlock the phone, it is a 1 week old ATT 8525 with the stock ATT WM5 Rom on it.....
Windows XP SP2+ PC.
If it's the rom RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship maybe it had some problems because if you go to the official release site http://www.htcamerica.net/support/8525/software-downloads.html they are still showing the WM5 rom for download.
There may have been a problem with the release and they pulled it back for some reason. Just a thought and not much help I'm afraid.
Yes thats it. When it ID's my current Rom and what it will upgrade to, it is correct. (it shows it's 3.62 vs my current 2.xx) Many peeps have had no problem upgrading to it. (most find it a very good Rom from the varios sites I read)
And this page at HTC still has it up:
http://www.america.htc.com/support/8525/software-downloads.html
JETninja said:
Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
Click to expand...
Click to collapse
You just need to wait for a while AS shuts down that is normal be patient and it will start updating you will see a progress bar will take approx 10 min after that
@brorex he can wait till christmas next year, if the updater cant communicate with the device , because it has closed AS then it will never update.
@JETninja
try doing what i said to this guy here,
http://forum.xda-developers.com/showthread.php?t=341282
yesterday he upgraded with the same rom and device and it worked
brorex said:
You just need to wait for a while AS shuts down that is normal be patient and it will start updating you will see a progress bar will take approx 10 min after that
Click to expand...
Click to collapse
I thought that too, but after the color bar test when it want to set you up to actually install the ROM, the Upgrader whats you to make sure there is an active connection with AS. Well, there isn't. It shut down and the PPC is still showing the color bars. I can reset it, then re-sync to AS. (after having to re-launch AS from the Program Files - it no longer resides in the Tray when it shuts down during the process) I then get it going again, it attempts to start the ROM upgrade, AS quits again.....about a min later I get the Communication Error message....
I'm downloading a 2nd copy right now, will try it as soon as it completes...
*Edit...think I have an idea what I'm doing wrong, I have it connected and synced too early, the first part of the ROM updater is just a PC test, I'm thinking the PPC should not have been connected at that time. Re-trying it now.....
Try putting it in boot loader and upload...thats what i did when i updated my 8525...Very much like the new ROM...
Going to give it a shot here at work on this PC. If no go still, will try the above mentioned methods. PC at home kept getting communication errors...
i had the same problem
make the connection at AS then start the update process.... the 8525 will go into 3 bar mode and when the update gets to the upgrading rom screen... the installed rom wont show up.... hit upgrade... and then continue and it will work.... i was stuck there for a while too because if i waited for the istallation to load then made the as connection the right image would show up in the installer but then it would stop working after that.....
I just put this rom on my 8525 and it worked well for me. My 8525 is unlocked with supercid so I had to extract the OS and update using the methods described for working with SPL-140 Olipro with IPL-1.01 or the "How not to Brick thread".
That won't help you much as you don't want to do that mod to your New 8525 and void the warranty, but thought you might like to know the stock OS seems pretty stable at this point and I have had no problems yet.
Thanks everyone! It finally worked here on my Work PC. At home I could get to the Bootloader, but it would lose connection for some reason. Here I lost it the first time, but tried it again and it managed to stay connected and apply the update. Got it up and running, applied owner info, just now re-doing the AS relationship. (a good 500+ contacts! LOL! It'll take a little while as usual!)
Then it's back to all the tweaks I like so far...and some new ones I've held up on since I've been waiting for WM6.
Out of my 3 PDA's (2 ipaqs and this puppy) this one has certainly been the trickiest ROM update, but it seems to be more my device since most don't have this much trouble.
Thanks again!
So far- So good, but just one problem- BATTERY!!!
After I installed upgrade, my battery drains in few hours... I reset phone, I reloded upgrade- nothing helps! Warranty still in affect, but phone worked well and I'm positive- hardware is OK. What else can i do to fix this problem?
I have the same problem
ai6908 said:
Try putting it in boot loader and upload...thats what i did when i updated my 8525...Very much like the new ROM...
Click to expand...
Click to collapse
I have the same problem exactly. As soon as I start the upgrade the device immediately sleeps and the connection is lost. 1 minute later I get a Connection error message.
I am new to all this. How do i put the machine in 'boot loader' mode?
Thanks
Just did this rom update again on a 8525 the installation went extracting files active sync shut down wait a few minutes nothing happens the the upgrade screen no ACTIVESYNC connection while update is happening as soon as device is in bootloader mode activesync closes out

Anyone got anys ideas on whats wrong with my TP2???

I have been using the Energy Leo Rom’s since September updating whenever I new rom is released, everything has always been fine with them and I absolutely love them. Me and my fiancée both use them, but lately my phone has been restarting over and over and will not boot, it gets to you boot up splash screen and restarts. When this began to happen I wasn’t even using my phone it was recharging as I was updating my computer to Windows 7, anyway I am able to revert back to T-mo’s stock rom and everything works, but whenever I go back to any none stock rom, even earlier ones it keeps doing the reboot thing, our second TP2 is fine. I have done research and haven’t found much I have ran Mtty at least a dozen times, even upgraded my radio, and nothing works but the stock rom, I have cleared storage both the software route, and the power, talk and end button route. Any help would be greatly appreciated, I just can’t handle this stock rom.
Shaolinstyle said:
I have been using the Energy Leo Rom’s since September updating whenever I new rom is released, everything has always been fine with them and I absolutely love them. Me and my fiancée both use them, but lately my phone has been restarting over and over and will not boot, it gets to you boot up splash screen and restarts. When this began to happen I wasn’t even using my phone it was recharging as I was updating my computer to Windows 7, anyway I am able to revert back to T-mo’s stock rom and everything works, but whenever I go back to any none stock rom, even earlier ones it keeps doing the reboot thing, our second TP2 is fine. I have done research and haven’t found much I have ran Mtty at least a dozen times, even upgraded my radio, and nothing works but the stock rom, I have cleared storage both the software route, and the power, talk and end button route. Any help would be greatly appreciated, I just can’t handle this stock rom.
Click to expand...
Click to collapse
Are you able to re-do the Hard spl?
Yes, I have redone it and nothing changed, it goes through the initial TP2 screen showing the radio and other info in red on the bottom, but as soon as it goes to set up the rom is when it restarts. Whats weird is it is never at the exact same time, sometimes will be a second, other up to five seconds.
Shaolinstyle said:
Yes, I have redone it and nothing changed, it goes through the initial TP2 screen showing the radio and other info in red on the bottom, but as soon as it goes to set up the rom is when it restarts. Whats weird is it is never at the exact same time, sometimes will be a second, other up to five seconds.
Click to expand...
Click to collapse
I know this sounds obvious and dont take it the wrong way but are you sure that the rom you are trying to flash as been unzipped properly and is named correctly. Try re-downloading a fresh rom and unzip it and rename it Rhodimg.nbh and put it on the root of your Sd card and try flashing it from the card. Also is the battery charged?
I am certain that the roms that I have been using are unzipped and named properly, there was actually a flahed rom on this phone that was workig fine until it started resetting with the rom on it, I wasn't updating or anything when it started to act up. Plus I use the same roms on a second TP2 which are working fine. I did try now to flash from my SD card, Hard SPL said it installed correctly but when I rebooted phone its doing the restart thing over and over still. Battery has been at 100% or close to for all flashes.

no service at all after routine flash

Just flashed to a new rom yesterday and now my phone is completely incapable of getting a signal.
I've flashed plenty of roms and they've all worked fine until flashing to a 21889 rom yesterday (firestormLeo v5.5). Not a single bar of service since. Text messages don't get received and no data either.
I reflashed, hard reset after the flash, updated the radio, flashed back to an older rom that worked, and hard reset again.
Nothing works! I now have a completely unusable phone (phone-wise). It completely works otherwise (music, sync to pc, wifi etc) although it does seem to get warmer than usual. I'm assuming that's because it's trying to grab a signal or something.
Anyone have any ideas on whats going on?
I would try flashing the original rom/radio that came with your device including removing the spl and seeing if that fixes it.
If that doesn't fix it, then you are all prepared for warranty service.
If it does fix it, then you can reflash your favourite rom and it should still work. But sometimes flashing an official rom can fix things. I know back with my Kaiser it was advised to always flash an official rom between switching from an unofficial to another unofficial.
thanks for the suggestion!
just did all that and now i'm on stock rom and removed spl but it still has zero signal/service.
i bought this tmo tp2 from craigslist so i'm not sure if i'm covered by warranty. where do i go to get this fixed? or am i screwed
anyone else have any idea whats going on?
I had a similar problem with you(http://forum.xda-developers.com/showthread.php?t=616426), and have been waiting for some reply since last night, though got none, but the problem disappeared on it's own.
I continuesly flashed and flashed official ROM's and Radio's, totally gave up at the end, charged the battery to 100%, removed battery and let it like that for 5 hours, did an hard reset, and well, working as well as new.
It's a T-Mobile version as well, though my problem was losing signal continuosly and asking for PIN again and again every 5-10 mins. HTC support offered me to use another SIM card today, since I asked what could I try last night, though I didn't have the need for it =)
A lot of roms do not come with a radio so you may have to get one and flash it. If you put stock rom back on make sure it has a radio as well. Make sure the radio matches the rom and the ril.dll is the right one.
I have not had the problem but have read about others flashing new roms and no signal only to find out they had to write a radio as well.
i'm certain i have the radio flashed on it and it isnt the problem.
just took the battery out and hoping it'll somehow fix itself in a few hours.
I would also recommend to flash the shipped stock rom. Go to htc's support/download page and download the rom they have for the t-mobile touch pro 2.
If that doesn't work, take it in for warranty with t-mobile. I purchased a used at&t tilt off craigslist and had an issue with it. Took it into at&t's device support center and they replaced it no questions asked.

[Q] Impossible to install a MIUI Rom

Hello,
I've got a branded HTC Desire. I rooted it with Unrevoked, created a Goldcard before but since I've only got one SD Card, I now use it as a normal SD Card, it certainly dismissed it's "gold" propertie I guess...
I wanted to install a MIUI rom, so I first went for the MIUI_Au ROM one of my friends has. As a consequence, I've been following their instructions. But, being unable to download their rom, since their download links are dead, I went for the UK version of the rom, as well as the MIUI-XJ ROM. I wiped everything, reseted the phone to the factory thing, then installed the radio version 32.44.00.32U_5.09.05.30_2. The Recovery didn't recognize it so I had to desactivate the signature check. After that, I rebooted, and tried to install the UK MIUI. After installing it, I rebooted the phone, but then it got stuck on the MIUI screen (where you have, at the top, "MIUI" and "Android ROM" written under, in chinese, and waves at the bottom at the screen). At first, it stayed on it, so I waited, since I read it was slow to boot the first time. But after around 3-4 min, it started to blink black every 10 seconds, as if it looped on this screen. After 10 mins I recovered my backup and erased the ROM.
I tried the same thing with this ROM, the MIUI XJ, but I got the same result at the same time. I also had to untoggle the signature check as well.
I don't understand where the problem comes from, but since I got the same on two roms, I'm starting to think I forgot to do something and it blocks the booting of the ROM... Any idea ?
Thanks.
Try a newer radio. No issues here. (check signature)
Yep, I also recommend to flash newest radio.
Miui roms
Install this radio 5.17.05.23 for miui roms. I'm using miui roms ( i've tried all version) and i have no problem...

[Q] Trying to flash back to Stock rom with ODIN. Need some help.

Heya people.
I have a weird issue.
First some history.
I bought this phone years ago as a backup and soon after I decided I did not like it and got another phone. Meanwhile I fiddled with custom roms. This was back in 2012 probably so im pretty sure the rom that is on the phone now is Cyanogenmod unofficial android 4.0.
Phone boots fine but is quite unstable. random reboots etc when using it to its fullest.
I litterally threw it in a box, and forgot about it. until my mom called me needing an emergency phone. I remember I had it and offered it. Saying it could be there in about a day or 2. She needs a phone for a couple off weeks till her current phone gets replaced by Huawei since it broke. She specificly needed a simlock free phone. Mine is unlocked so that would have been great.
So I read up about Odin and how you are supposed to reflash to stock firmware. Downloaded the stock firmware from Samfirmwares. Dutch firmware. I downloaded 2 versions since there is a vanilla one and a vodafone branded one.(my phone is the vodafone branded one so I tried that one first)
First I used the newest Odin version and it didnt work. Got stuck on setup connection for about 5 minutes and then timesout with a fail.....
Ok so I went back to browsing and found that using a older version of Odin might work. Been there done that. tried 4-5 different lower numbered Odin versions. All the same issues. Switched USB ports multiple times and also doesnt work.
I am currently at a loss.
PS I also tried the Samsung Kies method.. Initialize firmware and upgrade. type model number(succes) type serial number(succes) then it tells me my device is unsupported for this method.

Categories

Resources