I was flashing a my Hermes with a couple different ROMs (as I have done before) and for some reaason the one I got was a beta (which didnt specify). ANyways, now I cant even see my screen just a message that says 'This conlcudes the test of the software release....' Point is I cant get activesync to connect and can't get in to flash it to something better or what i had before.
The ROM i used was SX1.19949.3G.6MBPP
now I'm freaking out and can't seem to find it anywhere or how to fix it. Please somebody help me out here. WHat can I do?????
Also I found out this ROM is WM6.1 and maybe that's why its not connecting. I am trying to use Mobile Device center on vista to see if it connects but so far nothing on that end either.
Is there any other way of flashing that I can do without using activesync?
I figured it out. Thanks for looking though.
loooool.too funny.Check next time in threads, you might find answers. Same thing happened in 4.40beta in schaps, and he resolved it by guiding them through it.
Glad to know all went well with you
Related
OK my BELOVED X51v screen is on the fritz
(From an erlier post i made from a diffrent thread)
*********((Has any one else experianced flashing lines across the screen that almost looks like stactic off the the TV? I started getting it after I flashed to the newest ROM, I've tried to reflash twice, after the initial flashing, but im still getting the same problem. The "static" even showeed up on the boot screen of the firsat REflash. It seemed to get better but now I picked it back up and it was still doing it just a little bit, but enough to scare the crap out of me and let me know I didnt fix the problem even though it made it like 90% better than what it was, At first i couldn't even read the screen it was so bad. Im hoping I had a bad install with a corrupt file or somthing and not that my bassically new X51V is already broken. Im reflashing to the last rom now hopping that might fix the problem, If anyone knows what might be my problem I grately appreciate any advice. Also if this means anyhting it seems to get even worse when im playing music on it and the screen dims, it was looking fine with the back light on but then screwing up everytime that I turned the light off, I could be nothing because other times it was messed up even with the backlight on.))*******
and i cant find anyway to fix it so im thinking about sending it back to dell to see if they can either replace it or fix it, my ownly problem is i cant send it back with a "cooked" ROM. I tried to reinstall my WM5 A12 rom but when it goes to install the new ROM it disconects from my activesynct and my Windows Mobile Device Center depending on weather im trying to do it on my Vista computer or my XP. I REALLY want my x51v fixed, i tried getting the SD version of the A12 ROM but you have to make it yourself and i cont figure that part out, i can get up to the .nb0 file conversion but for the life of me i cant figure out how to make a .crc file that will work. Does anyone Please know a link to a downloaded pre-converted A12 file or atleast know how to help me figure out the stupid .crc file thanks so much in advance PLEASE help!!!
Drakey83
So Dell is going to send me a new PDA right now and I was just double checking that since I flashed back to the dell WM5 A12 ROM theres no way that they could find out that I used a Baked ROM right?! Just making sure so that my warenty Isn't discovered as void and I have to send my new PDA back.
After many flashings of roms, I finally flashed back to the official AT&T WM6 rom located at the link below:
http://forum.xda-developers.com/showthread.php?t=334771
My phone, even with my new sim card doesn't pick up any reception at all. All I get is the two arrows with the "x" and that other weird symbol with the exclamation point next to it.
I have a tilt and when I pop my sim inside, it works perfectly, no hiccups what so ever.
I live here in Hawaii and we just recently turned on the 3G network and I'm not sure if it affects my 8525.
Any ideas on what may be wrong? I had used Black Majiks WM6 on my 8525 previously but this past Monday I had issues with it so I tried flashing a bunch of times and still no fix.
I've searched through the threads for the last 2 days and everything I've tried so far hasn't work and I'm really desperate and need input from more professional users. PLEASE!!!
More information regarding phone problem.
When I try hit the green phone button, it doesn't do anything. Also going to phone settings under the settings menu, and it doesn't go there! Don't know why, I try to click it and nothing. Other icons work, not that one though.
This is getting ever more frustrating and I'm still searching through the thread for possible solutions, but nothing. Someone out there has to have some clue as to what may be wrong!
Found out another thing that might be of importance.
When I reset my device, soft or just turning it off and on, I get a "No GSM" on the AT&T screen.
Man, I've even gone as far as visiting Mr. Vanx's site to downgrade everything back to WM5. I still get the "No GSM" on my startup screen and no connection!
WTF?????????????
Well if you can get to the boot loader try flashing the official rom from HTC's Site for your phone. I'm not saying the one you DLe'd from here was bad but maybe it's just not the right one for your phone for some reason.
http://www.america.htc.com/
Well not to say the ROM you DL'ed from here was bad or anything but if you can get to the bootloader flash the officially released ROM from http://www.america.htc.com/ for your phone and see if that fixes your problem. Maybe the ROM you got from here is just not the right one for your phone or something. Worh a try anyway as you can't really use it as is.
Scrambler001 said:
Well not to say the ROM you DL'ed from here was bad or anything but if you can get to the bootloader flash the officially released ROM from http://www.america.htc.com/ for your phone and see if that fixes your problem. Maybe the ROM you got from here is just not the right one for your phone or something. Worh a try anyway as you can't really use it as is.
Click to expand...
Click to collapse
You know, the weird thing is that I tried to download stuff from the American HTC site, and I can only max out at 10.0kbps and I can NEVER get the whole file, only 15% maybe.
Talk about running into one problem after the other.
Is there a mirror out there somewhere?
Xyberz
Check your PM's
Xyberz said:
You know, the weird thing is that I tried to download stuff from the American HTC site, and I can only max out at 10.0kbps and I can NEVER get the whole file, only 15% maybe.
Talk about running into one problem after the other.
Is there a mirror out there somewhere?
Click to expand...
Click to collapse
I agree, anyone have it I can download? I keep getting lockups on my 8525 with the Schapps build and I want to try the offical build to see if it's the device or the build........but it downloads SOOOO slow......
Just finnninshed uploading RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe the Official ATT/HTC America file to Media Share. Here is the link for you. Hope it helps, let me know.
http://www.mediafire.com/?e0wkzvgm6ym
or
http://www.mediafire.com/?sharekey=ab1a9d4d5155409591b20cc0d07ba4d2067ccab3e6e21d05
Ok thanks for the uploads. Got the file. I just want to make sure if I should upgrade to Hard-SPL V7 before I use the update the rom?
I went all the way back to Herm SPL 1.06 and Cingular WM5. Don't want to brick the phone so wanted confirmation before I do anything else. Can't afford for things to get more messed up.
Xyberz said:
Ok thanks for the uploads. Got the file. I just want to make sure if I should upgrade to Hard-SPL V7 before I use the update the rom?
I went all the way back to Herm SPL 1.06 and Cingular WM5. Don't want to brick the phone so wanted confirmation before I do anything else. Can't afford for things to get more messed up.
Click to expand...
Click to collapse
Well I like using Hard-SPL V7 especially for the cooked roms as it gives you a bit of safety, but the rom I uploaded here is the Official HTC America / ATT Rom so you can follow their flash instructions for it. I even successfully flashed this ROM from VISTA 64 bit with no problem to my Herm 100.
As with any Flashing their is always a risk if something should go wrong that you will have a brick but your already near that point as you can't do anything with the phone at this point anyway.
GL & let us know how you make out.
i dont know what's wrong, ive owned this dash since march. updated to wm6 when it came out, then stopped giving a hoot after finding out that SNappunlock wont work on my dash.
i noticed people here found a very nice dash rom that i want to flash to so badly, but i learned that this requires appunlock in order to get the CID bypass to work
after searching around for wm5 (took about an hour) so i can flash back just so i can appunlock, then flash to the better rom. i found it! all thanks to BGNiko
you think i'm done with my problems, right? well i go to flash to wm5, and during the flashing session, the screen brings me to that RGB before the rom change happens, but no go! it tells me my usb cable isnt hooked up even though it is. ive had no problems re-flashing to the wm6, so the cable isnt the problem.
anyone ever have problems reverting to wm5? is there a solution?
thanks in advance
ps: i have us tmobile
uhh... did you try again?
i had the same thing happen to me. tried again, same thing (same message that you got). restarted the computer, tried again... presto. worked fine.
so long as the flash process doesn't start, your phone should be fine. it's just a matter of getting the computer to talk to the phone. it might be as simple as a computer restart... or trying a differnt usb port or something.
well, took your advise.. didnt work, but thats because i have vista (go figure). did it on my other comp and it worked
though i'm still faced with the appunlock problem
appunlock didnt work, and every time i go to execute sda unlock it tells me that its "not a certified windows CE edition"? or something to that matter
any help would be greatly appreciated
edit: wow, so i am an idiot. i thought the apps had to be excecuted from the phone.
anyway, did the uspl cid unlock. turned my screen white instead of black, but i'll take it
Hi guys, I've read and used the forum for years and upgraded my Cingular 8525 a ton without troubles (followed Vanx's method for vista and for upgrading), but this is the first time I'm really stuck without a clue.
I had Schaps latest OS on my phone working fine for about three days. It was charging with the USB hook up to my Computer. I pulled the USB out and the phone entered bootloader. I couldn't get it out. I tried using mtty to no avail, hard reset ect., but finally used the SD loading method to put TNT's latest on it (don't know why this worked). Here's the thing though, the phone will load fine on first load after I flash, but if I soft reset or turn the phone off and on it goes right into bootloader mode. The only way I can get it to load up again is to connect it to the computer's USB, take out the battery and then put it back in. the OS then boots up without fail.
I have read a ton and searched on the forum, and if any of you can help me understand what the hell I can do to fix my phone I would really appreciate it. I will post anymore info you guys would like, I really need your help on this one.
Thank you so much!
Hi,
I posted exactly the same problem today ! here:
http://forum.xda-developers.com/showthread.php?t=381284
It's really strange !
Dave
I've been reading everything and it appears that Schaps's new version seems to have this problem sometimes....I have the exact same problem as everyone else (mtty gives me the same results), and flashing a new rom doesn't get rid of it....I hope there is some way to fix this!
maybe I'll try flashing a new radio and see if that helps things....
I did notice that flashing Schaps 4.31 seems to include radio 1.50 and I had changed my anyway to 1.43 as I thought that was better for my area.
Not sure a radio will help. Maybe a different ROM version will ? Maybe 3.54 ?
I have flashed TNT's rom as well and it still has the problem now....I'm flashing a new radio as I type, I'm going to have to reflash the OS too, it just got stuck again as it was restarting.
Just a quick thing, I think I have solved my problem (not sure if it is permanent) by powering the phone off and on. Not resetting, just a simple power off. I spoke to a colleague who said the way it shuts down is different to soft reset (makes sense) and I haven't powered my phone off properly for a long time.
I have tried soft reset a couple of times since doing this and it hasn't gone to the bootloader screen once.
Maybe this is the simple fix.
I will keep you posted.
try to flash OFFICIAL ROM first , maybe there are few bug / missing file when error appear while flashing other ROM.
I hope it will help you both.
rgds,
ermen
Use mtty to see if yo have any bad blocks... I've had a few problems the same as yours and found I had 1 or 2 extra bad blocks, after the 2 "factory standard" bad blocks I got on my jasjam of course. hope this helps...
My fix didn't work.
Not sure what I am suppossed to see when I run "task 2a".
Has anyone had any luck fixing this ?
Hello,
Excuse me for posting here, if it is not appropriate, but i can not find a solytion elsewhere... yesterday i installed a greek rom by grigoris and my diamond would not synch with pc any more. How can i solve this problem please? I can not rll back to another rom, or do anything. Is there a solution? I appreciate your help
Dimitris
Try putting it into bootloader .....then see if it connects
Tell us what you have already tried.
band27 said:
Try putting it into bootloader .....then see if it connects
Tell us what you have already tried.[/QUOT
Thank you for your reply!!!
The story goes like this:
I had this wonderful rom, duttys, and when i saw that there is a greek one, although i heard a voice inside me trying to stop me from doing it, i installed it.
Then, all of a sudden i realised that I could not connect back to pc. The rom is not what i had expected I am afraid and i wanted to roll back. But, i can not make the connection. I blamed my pc at first, but the same happens wherever i try it. SO it has to be the rom.
I do not consider myself and expert at this, So this seems to be another problem for me. One has to learn from his mistakes i guess.
Now, I do not know how to do this "bootloader" you are suggesting.
These are my steps, apart from reading through the forum...
Click to expand...
Click to collapse