Related
Hi,
My Qtek9090 started to act wierd.
When I reset it sometimes it says "no GSM".
I have tried to reload latest radio software without success.
The phone also stops responding now and then for a minute or so
All this happened after I tried to install pocketZip (and run it once)
My guess is that something in the registry or some more deeper vaule (like calibration data for the radio) has changed and made the phone crazy..
Is their anyone out there that can help me to understand what happened?
Br
Lars
still GSM problems
Hi,
I still have problem radio problem.
Now I have reassembled it and found a loose screw :shock:
After that, I "upgraded" to latest rom, 1.40wwe, and then radio to 1.15
After this the PDA does not say "No GSM" any longer, though I only have rebooted it ten times or so.
But when I wake it up from sleep I can see that the radio has been shut off, both via "phoneAlarm" and the GPRS icon "G" which turns into double arrow with a "x"
And the problem with "slow" responce still occurs, but if I do a call, the slow responce dissappears for while.
I have now given up, and ordered a HTC TyTN instead, I hope its not bad choice...
Br
Lars
im having the same problem also
i know this may not work but i have no gsm sometimes on my o2 xda iis and it was solved via a soft reset try it
I have to say tht there are many issues in using the 1.15 radio..
it has borked many phones. so my suggestion to the mods is to remove the 1.15 link from the downloads.
I have also spoiled my phone using the 1.15 rom.
O2 says you need to change the mainboard..
so guys dont use the 1.15 rom
but i didn't install nethin and it happend...i still have the same problem...btw is there a way to instal the original radio rom...that might help my phone...cuz i dun thin i have one in ma phone
im using the 1.15 rom and its all working fine, i guess i must be lucky
i upgraded my xda iis radio rom to 1.50 after a soft reset i have a no gsm on my bootloader can you teach me how you have use or install your radio rom?sorry for bad english, and thanx in advance...
working
im using the 1.15 rom and its all working fine, i guess i must be lucky
Has anyone figured out why gprs settings & exchange password are disappearing everytime you do a soft reset!!!!!! I flashed to the Dopod new SEA rom from the official HTC 1.23 for Europe. Is there a trick to stop it from disappearing after soft reset or the rom is bogus??
Gilbert
PS: I am writing from the trinity so I apologize if this topic was discussed
its not happening to me!
I am not sure if anyone else is experiencing this but I also seem to have hard-spl 1.07ds and the 3.03 that came with the dopod rom installed in my bootloader. how I know? well if I try to downgrade to the official htc 1.23, I get the 1.07ds in the bootloader and it fails, the I try to reinstall the new dopod wm6 and it works. I have super cided device & I can write to my extended rom. could this be the reason my gprs username and password and my exchange password keep disappearing afTer a soft reset? I made a hard resetusing the two buttons to get it to factory specs & it is still doing it. I have no installed programs.
i don't believe 1.07 is hard-spl, and i don't think you can actually have two spl's on there at the same time. I think one is just being overwritten by the other.
thanks for the clarification. however why in God's name am I losing my connection settings and exchange password everytime I soft reset when I have no programs installed or previously installed cooked roms. I remember the Dopod ANZ version might have had something like this and maybe dopod pulled the rom and promised to put another one in few days. I could be wrong about that.
thanks,
gilbert
I'm also experiencing the same problem and I couldn't find a solution for it.
Have you done a hard-reset after flashing?
Hi,
Gilbert said:
I am not sure if anyone else is experiencing this but I also seem to have hard-spl 1.07ds and the 3.03 that came with the dopod rom installed in my bootloader. how I know? well if I try to downgrade to the official htc 1.23, I get the 1.07ds in the bootloader and it fails, the I try to reinstall the new dopod wm6 and it works. I have super cided device & I can write to my extended rom. could this be the reason my gprs username and password and my exchange password keep disappearing afTer a soft reset? I made a hard resetusing the two buttons to get it to factory specs & it is still doing it. I have no installed programs.
Click to expand...
Click to collapse
Just discovering the flashing thing, so I'm not expert, but as far as I understand 1.07ds is not a hard-spl, but one that is pushed onto the phone by the update utility. To know what "resident" bootloader is on the phone, U need to enter the bootloader mode by pressing power+camera button plus doing a soft-reset.
Furthermore, to avoid installation of another bootloader (like the 3.03), I installed an hard-spl (olipro 1.30) and I put the phone into bootloader mode manually prior to flashing. Otherwise, the udate utility pushes the SPL 1.07ds which does not prevent the installation of the new 3.03 bootloader.
If you have the 3.03 on your device and want to downgrade, have a look at http://trinityguides.info at the Dopod WM6 Guide.
As to the disappearing Exchange password, I do not experience this pb.
Bye
yes, it is happening to me also on SEA version.
to be honest I was not overly impressed with the official SEA version so went back to AX3L's great ROM.
as for why the exchange and GPRS settings get lost, the only thing I seem to see is that it is if I installed or uninstalled some app that needed a reboot. it was not one particular app but I seemed to see the problem after installing / uninstalling themes and the kaiser home plug.
have you done any of these and seen the issue?
BMF
badmelonfarmer said:
yes, it is happening to me also on SEA version.
to be honest I was not overly impressed with the official SEA version so went back to AX3L's great ROM.
as for why the exchange and GPRS settings get lost, the only thing I seem to see is that it is if I installed or uninstalled some app that needed a reboot. it was not one particular app but I seemed to see the problem after installing / uninstalling themes and the kaiser home plug.
have you done any of these and seen the issue?
BMF
Click to expand...
Click to collapse
My pop3 account was gone after my FIRST flash with WM6 and install of the Kaiser home plugin. But then I did a hard reset, flash WM6 SEA again, and again hard reset. No problems at all anymore... Thats why I stated the hard reset
after hours of playing with the my bloody machine, i seem to have pinpointed the bloody problem. it is the new windows messenger doing all this crap. I am not sure how as I did not go through the codes but when I don't set up windows messenger and merge the contacts with the device, even if i do a thousand soft reset, the connection to the gprs automatically comes on and my exchange syncs no problem. but when you set up messenger with the device, you start getting the same crap of disappearing gprs settings and exchange password!!!
questsin said:
its not happening to me!
Click to expand...
Click to collapse
Me too.SEA version
What a total pain! Guess I'll stick with just the radio upgrade for now then.
I was going to suggest that if things seem funky after a ROM flash it is always worth trying a re-flash in case something just went a little awry first time around. But the fact others have found the same issue seems to clearly warn that this is not a one off misfortune.
Many thanks for letting everyone know... and good luck with straightening it out.
different experience
I had lost my Exchange passward and the Cingular GPRS setting info a couple of times, but after my back up today, I lost all the settings to the point that I couldn't even connect to Wi-Fi. I hadn't done a hard reset after my flash, so I am doing that now. I never set up Messenger, so I can't imagine how that could be the problem.
Would that be the same problem as the device password that some others were screaming in other threads about wrong device password?
http://forum.xda-developers.com/showthread.php?t=317841
I would guess that there's a credential database WM uses to store usernames and passwords, just like your desktop windows OS, and it either got corrupted on the memory or failed to write back to the filesystem after resetting the device.
The result would then be lost passwords, including device passwords, gprs, exchange, mails, wifi...
I have the ANZ official ROM and see the following problems (which I reported a while ago)
1) GPRS password occasionally gets blanked.
2) WEP password lost occasionally
3) Windows Live password lost occasionally .
I can't figure out what causes it- I rarely soft reset, preferring to turn off.
The biggest PITA is that my device code changed, which means I cannot use TT traffic until I get a letter from HTC.
Hmm, i'm suffering this problem also. It is mentioned in one of the various topics of the WM6 - Roms but really doný know where anymore. Anyone knows if this is possible to tackle?
Thanx!
Riel
Riel said:
Hmm, i'm suffering this problem also. It is mentioned in one of the various topics of the WM6 - Roms but really doný know where anymore. Anyone knows if this is possible to tackle?
Thanx!
Riel
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=342269
It's not the solution I guess.
I use Prophet, but this is only topic of it.
I can't make a new account, it sais 'Name exists'. But it isn't showing up, and can't find it in the registry ...
Any ideas were to remove the old ones?
No problems for a while
I followed some guidance after having the problems, and for a good many weeks it's been fine (maybe over a month).
I set all the passwords (web, WIFI) and BT pairing.
Then I turned the device off with the power buton (NOT soft reset).
SInce then, it has all stuck.
Hi everyone
I have used the fanstatic guides & software on this forum to update my Orange SPV M3100 to WM6 successfully (for the second time - had to return my first M3100 due to white screen of death).
However, this time, despite trying every Orange settings CAB I can find, I can't send Text Messages ("Your text message cannot be sent") and my voicemail light is stuck on (even though I have no voicemails) (I have tried the Voicemail fix CAB on the wiki without success).
If anyone can help I'd be really grateful
Goto the link and download the cab to your phone, execute it and soft reset the device, see if it fixes the problem.
http://www.4winmobile.com/forums/hermes-black-rom-support/11624-orange-uk-rabdo-v1-6-cab.html
Thanks Starfury. I tried what you suggested, but to no avail. Messages sit in the outbox for a minute or so, then I get the Cannot Send message. Voicemail indicator stuck on too. Have tried hard reset. Not sure what to do next
This always works for me on OrangeUk M3100 with any version of WM6 mate.
Hope it does same for you. Would've thought it will.
Thanks chunkymonkey. I've already tried that one, but I gave it another go....no effect.
I think there is a deeper problem here...
I can see what you are saying regarding the CAB files fixing the problem however I had this problem with my first ever WM6 flash as I only upgraded the ROM not the Radio and was using a really early radio version.
My messages would not send and also when I fixed this my voicemails would get 'stuck' and the voicemail light was always on.
Which ROM are you using? which Radio version etc?
Personally I fixed mine by flashing to black magik and uprading to radio 1.48
Thanks Raven. I'm not sure how to tell to be honest.
I unlocked the phone using "HTC Hermes SIM & CID Unlock - v3a"
Then flashed "HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108"
How can I update my Radio? Can you point me in the direction of the right file?
Thanks loads
Hi mate,
Try this, this is a guide to upgrading to radio 1.43, the principle is the same though for all radio versions. Ensure you have HardSPL installed etc.etc.
(read all the guides lol!)
You should be able to find newer radio version on this forum, I use 1.50 at the moment on Orange UK and works a treat
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=61&Itemid=27
Hope this helps
Thanks for the tips Raven. I have successfully flashed to Radio version 1.5 - but there's no change to the problem at all.
I've totally run out of ideas on this one, gonna throw the damn thing out the window its so frustrating!
All I can suggest is flash to another 'cooked' rom.
I'm using black X (RC) at the moment, super fast and just enough apps to keep me going. Having no trouble at all with this rom and radio 1.50.
Hi,
When i first got my BA, i upgraded from WM2003 to WM6.
This worked ok for everything (A few glitches here and there but i could live with them), but then, my phone battery had ran out, i charged it and loaded it up again and it now shows No Service on the today screen, so I can't make any calls off it.
I also noticed that when the phone boots it shows No GSM where it used to have 2 different numbers.
I've tried reflashing it to WM5, and also to WM6.1 but both of these didn't seem to fix it. The WM6.1 version I used can be found here http://forum.xda-developers.com/showthread.php?t=390862
Is there anything I can do to fix this?
Thanks!
Yes, fix is quick and easy and you can do it even at home: a soft reset.
Hi,
thanks for your reply,
I have tried soft and hard resets but this doesnt seem to fix it.
I wanted to try upgrading my Radio rom but when I ran the updater I got error 114. I'm not too sure what this means though?
Thanks!
Solution against "No Service" issue
Have a lot of Siemens SX66's. Just took one and ran unlocker, then flashed WM 6.0 and upgraded radio to 1.15.00. After that inserted SIM card and saw permanent "no service" message. Tried HR few times for no avail. Here's what really helped: I ran universal unlocker once again and then did soft reset. Voila! System booted and connected to GSM network. Hope somebody will find this useful.
Hi, All!
2 Larik007:
Did you have similate trouble with radiorom?
I have analogic problem with my BA (iMATE PDA2K)
At boot screen I see
No GSM
D 6.14 WWE
and boot process stops at this position.
Once my BA was booted up with this trouble, and goes to reboot and all repeats again.
I can't reflash radiorom.
At 61% I have "Error 114: Radiorom upgrade error"
I tried to reflash radioroms from 1.02 to 1.15, but nothing positive.
:-(
Can anybody help me?
No, my problem is because of some kind of error during unlock process, I guess. And your problem appears to be similar to "No GSM" issue of Hermes phones. But it may be repairable unlike Hermes ones...
Larik007 said:
Have a lot of Siemens SX66's. Just took one and ran unlocker, then flashed WM 6.0 and upgraded radio to 1.15.00. After that inserted SIM card and saw permanent "no service" message. Tried HR few times for no avail. Here's what really helped: I ran universal unlocker once again and then did soft reset. Voila! System booted and connected to GSM network. Hope somebody will find this useful.
Click to expand...
Click to collapse
I have the same "no service" issue. Can you give me a link for this magic universal unlocker
- what is this anyway?
Thanks!
http://wiki.xda-developers.com/index.php?pagename=BA_Unlock_Sim
Look for a link under word "this"
i had this problem, heres what i did that made it work,
1.re-insert the battery
2.press the on button
3.press the reset button TWICE
EVERY time you turn it off and on do this, but if you reset the phone you dont need to do it twice.
hope this works as it did for me,
Josh.
Partial solution for "No signal" problem
I think the idea was posted by xplode sometime ago- I spent a day playing with it, but it finally worked for me.
0) I had unlocked BA with 2003. Later on I upgraded it to WM 6.1 and then at some point I've got this "No service" issue. I upgraded my Radio to 1.15 (it did not help me- but I did this in the very beginning, so may be it matters)
1) I downgraded ROM to one of 2003 ROMs (xplode has a collection: http://tinyurl.com/cozbbx)
-) downgrade instructions are in here: http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
2) I unlocked band page for the network connection- it was discussed in (http://forum.xda-developers.com/showthread.php?t=297099)
2.5) I finally used this cab : http://forum.xda-developers.com/attachment.php?attachmentid=23788&d=1121269005 to set band selection to 900/1800 (still no service)
3) I removed sim card and did a hard reset followed by soft reset. I put a sim card back and soft reset BA.
--- I guess at this point it's 2003 with 900/1800 band and working
4) I upgraded my ROM to 6.5 and it is working now.
the link is dead.sorry for my bad english i've tried all the procedure but still had no gsm on my xda iis dont have imei and i cant see my radio version can you help me....
Lucky You that I still have troubleshooting tutorial in my file archive. I've written it by myself when was unlocking many of these devices.
Although I'm not sure if it will help with symptoms You listed...
Here it is what you can try to do if your Blueangel PDA phone constantly showing "No Carrier" and it is not possible to enter phone settings:
1. Take off the battery from the phone while it is turned on.
2. Place the battery back in, turn on the phone. At bootup there should be stated "NONE" instead of versions of "R" and "G" (seems that it is required to be so).
3. After OS had boot, run the Unlocker. Few times, maybe.
4. Reboot.
Hallo,
I've got a big problem with my MDAIII. After the upgrade to WM6 rom my radio doesn't work anymore. I have tried to update the Radio rom but with no succes. Every radio rom update tool i dowload will not work.
I read many wiki's and posts but come no further.
I have read that i have to downgrade to WM3, then update my radiorom and then update to WM6. But the problem is the downgrade roms to WM2003 doesn't work too.
The other strange thing is when i put out my battery and then put it back and startup my pda he says:
R:None
G:None
D:6.11.00.wwe
But when i gave the device a soft reset or hard reset the versions are:
R:1.00.00
G:1337.30
D:6.11.00.wwe
What are the real numbers?
Who can help me?
Sad MDAIII user
Edit:
If i give the device a hard reset and the startup screen give me this info:
R:1.00.00
G:1337.30
D:6.11.00.wwe
then the phone accepts the pin code from my simcard, but after the accept the device gives the message unknown SIM status.
Problem solved. Found a Radio rom that can install in bootloader mode. Or they al have to i don't actualy know.
Can you ponit me to the radio rom that actually works?
I have the same problem, although I install radio updates in bootloader, no one is kept when I remove the battery.
thanks
on WM5, WM6 and WM6.1, when u take out the battery, you need to soft-reset the device to allow the radio to boot.
ive lived with this 'issue' ever since i started flashing roms over my blueangel wm2003.
it's never been a problem...more of a minor annoyance to have to 'double-boot'.
say for example..if I've changed simcards and is switching on device for the first time id have to
1. switch on
2. reset to get the radios recognised