Thread closed. Please visit the new one.
In my experience, I have only tried 1.25.03, 1.25.05, and 1.25.08 on my MDA Compact IV with Swift's V7.0 Full Rom (recommended!)
Out of those three, .08 appears to give me the most stable (and slightly better HSDPA) signal on T-Mobile UK in the south.
I can't say I have noticed any difference in battery life between .05 and .08, both of which are approx (IMO) 30% better than .03
GPS aquisition - maybe a tad faster on .08, but I reckon it is impossible to make any reasonable judgement. I have certainly had no problems with acquisition on any of them, with all of them acquiring within 30 secs.
WIFI - I use a WPA2 encrypted network, and have never got my diamond to connect with any rom or any radio - it times out on the first key exchange so I cannot really comment at this time.
Hope that helps someone.
newby question:
Is it possible to upgrade radio without loosing all data on my phone?
tnx in advance
mofolino said:
newby question:
Is it possible to upgrade radio without loosing all data on my phone?
tnx in advance
Click to expand...
Click to collapse
Yes, I believe it is
Hi you guys.
I heard someone talk about som new Raphael radios? Or wasn't that to the Diamond?
These is original Htc Diamond radios
Radio v1.00.25.08 (Quad Band)(Provided by Dutty)
-Download here
[/QUOTE]
After updating to this radio, I have get an H down in the left corner, is that normally, do you others. Have this ?
mofolino said:
newby question:
Is it possible to upgrade radio without loosing all data on my phone?
tnx in advance
Click to expand...
Click to collapse
You dont lose any data if You use the Custom RUU (Look in the 1 post!!), and if i remember right its precent in all radios if you download from this diamond forum
danny_and_2 said:
These is original Htc Diamond radios
Radio v1.00.25.08 (Quad Band)(Provided by Dutty)
-Download here
Click to expand...
Click to collapse
After updating to this radio, I have get an H in down in the left corner, is that normally, do you others. Have this ?[/quote]
Yes in the boot screen.
mofolino said:
newby question:
Is it possible to upgrade radio without loosing all data on my phone?
tnx in advance
Click to expand...
Click to collapse
if you flash just the radio...it won't or "shouldn't" touch anything else
ill try 08 today when i get home today from work
Reverted back from .08 to .05 after a couple of days. Seems that .05 is better for me: better UMTS signal reception.
ROM: Swift 7.0
Country / Provider: NL / KPN
GPS: .05 and .08 perform similar
UMTS: .05 is better than .08
judging from these posts i think i'll have to try .08 too, i was on .03 as stock and i've changed to .05 and it was stable enough to not go back, however, an increase in HSPDA would be nice
has is ever been clearly determined if there is a Radio Rom upgrade that will take a European Diamond and get it to function on 3G with ATT/Cingular in the US? If so, which one?
curious george said:
has is ever been clearly determined if there is a Radio Rom upgrade that will take a European Diamond and get it to function on 3G with ATT/Cingular in the US? If so, which one?
Click to expand...
Click to collapse
has it been clearly proved? i have not seen any real proof that it works or does not work. users here say they know and it sooo obvious, but still no written proof. its been a while since that US version has been around and not 1 peep. so, i really just gave up. even with edge speed my phone still fux up any device that comes near.
I have a question what radio version need to use for 3G in 1900Mhz?, thanks..
.08 rocks!
Well, I had bought the Touch Diamond EURO version, not realizing what I was doing. I live in Anchorage, Alaska, USA, I did the Dutty Rom, HardSPL, etc..
Then I went to the .08 radio, WALLA!
Where I had 1 bar or no service, now I have 5 bars.
I am gonna make a donation to Dutty! This is AWESOME!!!
Up here in AK, soon, we will have 3G via AT&T also SUPPOSEDLY!!
These threads ROCK!!!!
a newbie question again!
i tried to upgrade from .05 to .08 but nothing happened and I think that is because I have original ROM.
what I have to do to be able to upgrade radio.
tnx
mofolino said:
a newbie question again!
i tried to upgrade from .05 to .08 but nothing happened and I think that is because I have original ROM.
what I have to do to be able to upgrade radio.
tnx
Click to expand...
Click to collapse
flash it
mofolino said:
a newbie question again!
i tried to upgrade from .05 to .08 but nothing happened and I think that is because I have original ROM.
what I have to do to be able to upgrade radio.
tnx
Click to expand...
Click to collapse
You can keep the original ROM and update the Radio.
You need to Hard SPL your Diamond (look in stickies for instructions) then download a radio and install.
MAKE SURE YOU HAVE DONE HARD SPL FIRST!!!
otherwise you will end up with a Diamond shaped paperweight
i tried .08 Radio but it drains my battery realy fast. Reverting back to .05 again
I disabled 3G because the phone is switching all the time, bad 3G reception in my neighbor
Country: NL
Operator: T-mobile
Band: tested GPRS, tested 3G, no difference in batt usage @.08
No No No.....08.....
I WOULD ADVISE YOU NOT TO USE 08 RADIO BECAUSE I PUT IT AND WHEN THEY WERE CALLING ME I WAS LOOSING CALLS AND IT WAS MAKING 10 SECONDS TO CONNECT AND OFFCOURSE THE OTHER PERSON WAS CLOSING THE PHONE..............I WAS PUTTING BACK 05 AND EVERYTHING IS OK AGAIN...................
BE CAREFUL MY FRIENDS........DONT UPDATE YET........
Related
hi
can anyone point me in the direction of the download for this rom - i keep seeing it in people's sigs and i'm jealous
cheers
si
A newer version of the radio stack is not necessarily better than the older one. For example, several members in the UK find 1.09 works better than 1.11
I don't know where the 1.12 radio stack is, but the 1.11 is available here: ftp://ftp.xda-developers.com/Universal/Radio
1.11 radio problems
I have had strange probems with 1.11, including loss of signal & inability to dial in places where there is a signal. Only starts working again after a soft reset. Its intermittent but reason enough to go back to the QTEK ROM with radio 1.09.
1.11 radio problems
I have had strange probems with 1.11, including loss of signal & inability to dial in places where there is a signal. Only starts working again after a soft reset. Its intermittent but reason enough to go back to the QTEK ROM with radio 1.09.
I have a feeling that it depends on where you use your phone...
I had the same probs with droping calls where the phone worked before in the UK with 1.11 going to try 1.10 for a bit.
How To Upgrade MDA PRO from Chinese to English
Hi,
I just bought a T-Mobile MDA PRO in China but it is in Chinese. Can some one advise me which WWE ROM I should use in order not to cause the system hang after upgrade? Can I upgrade WWE ROM from other brand? I got the following info from the set:
ROM version: 1.00.00WWE
Radio version: 1.06.00
Protocol version: 42.40.P8
ExtROM version: 1.13.134 CHT
Thank your in advace
FongSG
fongsg: Go for the Qtek AKU2 ROM 1.30.77 1.30.176 1.09.00 WWE.
It is one of the few ROMs which have AKU2 as well as A2DP for Bluetooth. It's quite fast and stable as well. The radio ROM is also very stable - apparently better than the 1.11 stack.
i upgraded to radio 1.08 and so far have been having lots of probs with the signal, also losing my net connection etc.. anyone suggest a good radio?
kanjer said:
i upgraded to radio 1.08 and so far have been having lots of probs with the signal, also losing my net connection etc.. anyone suggest a good radio?
Click to expand...
Click to collapse
Try 1.09. It seems to be the most popular radio stack at the moment.
richardlai said:
kanjer said:
i upgraded to radio 1.08 and so far have been having lots of probs with the signal, also losing my net connection etc.. anyone suggest a good radio?
Click to expand...
Click to collapse
Try 1.09. It seems to be the most popular radio stack at the moment.
Click to expand...
Click to collapse
what about RADIO 1.10 from T-mobile ???
1.10 gives me the best reception (in the Netherlands)
I'm having problems with 1.09 in the US I drop my GPRS and calls fail all the time. I am upgrading to 1.11 to see if this helps.
1.11 is REALLY bad in the UK on o2, bad signal, and once lost it is impossible to get back, have to switch off radio and then back on to get the signal back. That's my experience anyway, 1.09 is the best I have used so far, very strong signal and very stable
Using an O2 XDA Exec with Radio 1.09 in Asia [Manila, Philippines] any other Universal users who have updated to Radio 1.11? How is it? Does it perform better compared to 1.09? I am unsure if I should update my Radio to 1.11, some posts here say 1.11 is unstable for their territory but I would like some info on 1.11 radio ussage in Asia. TIA.
No problems here using 1.11. Been using it for about 1 month. Portugal territory
bnycastro said:
Using an O2 XDA Exec with Radio 1.09 in Asia [Manila, Philippines] any other Universal users who have updated to Radio 1.11? How is it? Does it perform better compared to 1.09? I am unsure if I should update my Radio to 1.11, some posts here say 1.11 is unstable for their territory but I would like some info on 1.11 radio ussage in Asia. TIA.
Click to expand...
Click to collapse
also have the XDA Exec here in Manila and I have tried 1.11. Went back to 1.09 as it seems to give me better reception
@herbules: Many thanks for the info I'll probably stay with 1.09, may I ask which operator you are on? I am on Globe and their UMTS coverage sucks.
bnycastro said:
@herbules: Many thanks for the info I'll probably stay with 1.09, may I ask which operator you are on? I am on Globe and their UMTS coverage sucks.
Click to expand...
Click to collapse
yup...Globe UMTS really sucks, I also tried my Smart line on the Exec and UMTS was almost flawless, except I couldn't get my real player to play streaming vids smoothly
Hey guys,
Where I could download a stable Qtek 9000 ROM which is best in HK and Manila...?
Thanks :wink:
Found on buzzdev.net
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=24437&catid=40 8)
does anyone know new ROM from Orange release 25 August 06.....??
any link....??
Here we go with this new - ROM -
http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKPage&cid=1142943309969
I understand that upgrades to radio 1.13, but what's about the rest of the version, i mean rom and so on?
thanks.
I'd also want to know what is new in this ROM aside from the radio. Does this ROM have both AKU2 and A2DP support?
Does upgrading to 1.13 on the radio make much of a difference?
In an area where I used to get a 5 bar signal strength on the alpine with radio 1.04 I now get a 2 bar signal with the Universal and my wife complains bitterly that the sound breaks up whilst I'm talking to her...
G
gquipster said:
Does upgrading to 1.13 on the radio make much of a difference?
In an area where I used to get a 5 bar signal strength on the alpine with radio 1.04 I now get a 2 bar signal with the Universal and my wife complains bitterly that the sound breaks up whilst I'm talking to her...
G
Click to expand...
Click to collapse
It is hard to answer your question because different radio versions have different performances on different locations. So you basically have to try it yourself to determine if this will improve the quality of your calls in your area. The most important thing to know is you will not loose your current settings or programs installed as long as you ONLY UPGRADE THE RADIO VERSION AND STAY AWAY FROM UPGRADING THE REST OF THE ROM.
Thanks will give it a whirl - iirc its a case of deleting the nk.nbf and ms_.nbf files out of the upgrade?
G
gquipster said:
Thanks will give it a whirl - iirc its a case of deleting the nk.nbf and ms_.nbf files out of the upgrade?
G
Click to expand...
Click to collapse
Yes, and using the Ma_Upgarde_No_ID Tool to install it. I'll probably try and install it too myself today.
I think it's time that some informed people start telling the rest of us what's changing from version to the following: personal impressions on perfomance are often contraddictory, many are downgrading after upgrading. What's going on?
Gah now I'm annoyed.
I applied just the radio update and at the end when it told me to do a cold start I did just a normal soft reset, fingers well away from the keyboard. It starts to boot and I notice from the splash screen that it's QVGA instead of VGA as I expect. I think "Oh OK I just need to run ozVGA again it's just got reset by the update" - all of a sudden it tells me to "Tap the screen to begin using Windows"
Not amused.
Fortunately I kept a backup but that's really annoyed me.
G
gquipster said:
Fortunately I kept a backup but that's really annoyed me.
G
Click to expand...
Click to collapse
excuse my ignorance (cause it's really buggin me too! ) but how do you backup the EXEC? on previous PPC's there was a backup to falsh utility. all i've seen are references to backing up 'my documents'. i would like to have a full backup like i used to get.
any help appreciated.
nevermind "Spb backup" it is!
hi gquipster
did you see any difference in the radio upgrade??
i am also having a little reception difficulty with radio 1.09 sometimes 5 bars and couple of minutes later in the same location no reception so any feedback will be appreciated. thanks
Backups:
When I say a backup what I meant is that all the cab files etc that I use are all stored on the SD card so it was just a case of rerunning them rather than having to dig them all out. Also all my files are kept on my SD card as well.
I see they've removed the backup option from ActiveSync 4.2 anyone know why that would be?
Radio 1.13:
Well I haven't really noticed much difference in the signal strength indicator on the screen but call quality whilst sat at my desk seems the same - perhaps slightly better. It does seem to be answering calls marginally quicker but that could be wishful thinking.
Real test will be as I drive home this evening, several areas where the phone broke up yesterday where my Alpine didn't so see how the new Radio performs there.
I actually didn't use the no_id upgrade tool I re-encoded the radio_.nbf file changing the operator id to O2 and then used the ROMUpgradeUt.exe etc from the last official O2 update just with the nk.nbf and ms_.nbf files removed. Maybe that's why it hard reset my phone? Not entirely sure.
Anyway if there is anyone with a debugger/decompiler/whatever who can analyse exactly what the changes between Radio 1.09/1.11 and 1.13 are I'd be very interested, I'm wondering if it's actually the same update just with a different version number depending upon the service provider!!!
G
Did someone above mention that this rom makes the screen qvga? I would be interested in that, as long as it doesn't screw up my phone software (like it does with ozVGA). Just to get a clear picture, how good is this upgrade, if anyone has anything to offer from experience, when compared with Imate JJ 1.30.82 WWE and 1.09.00 (radio) I am using on my universal (O2 xda exec).
i applied the radio rom to the qtek rom. no problems - no qvga
Device Information :
Operator version : 7.130.1.174 <---- NEW info...What it is..?
ROM Version : 1.30.90 WWE
ROM date : 02/24/06
Radio version : 1.13.00
Protocol version : 42.47.P8
ExtROM version : 1.30.174 WWE
OS 5.1.195 (Build 14847.2.0.0) ----> AKU 2.0 (nothing new)
i think this is same with previous orange ROM, the new one ONLY Radio 1.13.00 updated, and have NO issue with new radio, everything seem OK..!
will be revert back to AKU3.2_Ivan and keep this radio...
I got QVGA cos I think I fscked up the update and it ended up cold booting my system. Haven't yet looked at exactly what I did wrong yet, might do if I get a chance after work this evening.
My current config now is:
ROM Version: 1.30.107 WWE
ROM Date: 04/11/06
Radio Version: 1.13.00
Protocol Version: 42.47.P8
ExtROM Version: 1.30.162 WWE
OS 5.1.195 (Build 14847.2.0.0)
Notice you have a different ExtROM version to me - what exactly is different do you know?
I'm off on holiday as of tomorrow so may not get much of a chance to reply for a week or so (depending upon how many emails I get in my work account by the time I get back!!!)
G
Is there A2DP support in this new ROM?
Radio 1.13
Seemed slightly better whilst driving home today my wife didn't complain about me breaking up as much but she did say that it still wasn't as good quality as the "that other gadgetty thing you used to have" (Alpine).
Also for the first time this evening it detected a 3G signal in my house (0 bars but it detected it!!!) for all of 5 minutes before switching back to a 5 bar GSM signal. Will try moving it nearer to a window and see if I can get the 3G signal back, but thats a definite improvement.
Anyway all subjective I'm afraid as I don't have the expertise and/or the tools to be able to do proper testing.
Still need to figure out exactly what I'm doing with cooking ROMs etc first...
G
ftp://xda:[email protected]/Uploads/Universal/M5000ruu.exe
RE
I'm only interested in the radio. Is it stable, louder and better?
If yes, can somebody extract and upload here?
Thanks
Re: RE
FOSA said:
I'm only interested in the radio. Is it stable, louder and better? If yes, can somebody extract and upload here?
Thanks
Click to expand...
Click to collapse
link to the extracted radio ROM can be found on the first post to the thread link below. so far nobody has a concrete example of an improvement. i loaded it last night. no change to test yet.
http://forum.xda-developers.com/viewtopic.php?t=60965
RE
Thanks. Downloading now
Not sure whether it'll work better on my QTEK9000
:roll:
Re: RE
FOSA said:
Thanks. Downloading now
Not sure whether it'll work better on my QTEK9000
:roll:
Click to expand...
Click to collapse
i installed the 1.13 radio along with the latest QTEK ROM.
I've installed radio 1.13 with different ROMs and it always showed a very bad performance in terms of reception quality and GPRS/3G/UMTS functionality.
Reverted back to 1.11 now.
Re: RE
skywriter said:
FOSA said:
Thanks. Downloading now
Not sure whether it'll work better on my QTEK9000
:roll:
Click to expand...
Click to collapse
i installed the 1.13 radio along with the latest QTEK ROM.
Click to expand...
Click to collapse
been a couple of days. i don't notice any change over 1.09, or 1.11.
i use the phone mostly for blackberry email, and web browser. reception is the same.
Re: RE
skywriter said:
i use the phone mostly for blackberry email, and web browser. reception is the same.
Click to expand...
Click to collapse
Did you succeed with BBConnect on Ivan's AKU3.2 ROM ? I cannot make BBConnect run.....
Re: RE
baudy2 said:
skywriter said:
i use the phone mostly for blackberry email, and web browser. reception is the same.
Click to expand...
Click to collapse
Did you succeed with BBConnect on Ivan's AKU3.2 ROM ? I cannot make BBConnect run.....
Click to expand...
Click to collapse
i have not tried Ivan's AKU3.2 ROM. at this point i'm just going to use it as is. it's working fine for me, and i need it stable for work.
i have not been able to get it to work on AKU3 yet either....
SMS - No incoming messages
I post just to alert others to a problem I have just encountered that may, or may not, be attributable to Radio 1.13.00.
Ever the adventurous, I flashed with Ivan's AKU 3.2 ROM and MvRTrue VGA and, I think, everything was working fine. Going a step further I then flashed the Radion from 1.09 to 1.13.
Now I do not seem to be able to receive SMS.
I thought for a while that I had cooked the Sim because I stupidly left it in during the Radio upgrade. But I have now changed the Sim and the same problem persists.
The problem could be 1.13 OR the combination of 1.13 and AKU3.2 OR something else (ie hardware problem) but, in the latter case the coincidence of it occuring at the same time as the ROM upgrades makes me think it unlikely.
I am just flashing back to Radio 1.09 to see if that cures the problem.
Has anyone else seen a similar problem and got any other suggestions?
Andy
Re: SMS - No incoming messages
apbristow said:
Now I do not seem to be able to receive SMS.
Click to expand...
Click to collapse
i have radio 1.13 on QTEK ROM. i am recieving SMS messages fine since the upgrade last week.
Bak on Radio 1.09 and SMS working
Update - Have just flashed back to 1.09 and SMS working OK. So can only conclude that it is 1.13 problem (perhaps just incompatibility with O2??) or incompatibility between 1.13 and O2 SMS Plus app which I use for SMS messaging. Will do further tests - but tomorrow. In the meantime would welcome others' experiences.
Andy
Works fine with T-Mobile Germany
UMTS reception got better (in my room, UMTS from no availability to 2/5, GSM unchanged 4/5)
i'd have to say this seems to be the best overall package i've used (was previously running my own mix of qtek with radio 1.11 and orange ext rom) really fast and no dropped calls as yet. reception much the same but reasonable.
Here is the promised radio.
http://rapidshare.com/files/130166402/RUU_signed.zip.html
I don't think it is the best radio... but some ppl want to try it, bc of the GPS problems.
Radio is not signed and please posts your results
testing....
what radio do you mean? version?
version 1.02.25.11
Can´t flash it ;-(
jkb770 said:
Can´t flash it ;-(
Click to expand...
Click to collapse
it is unsigned, you would need the developer Hard SPL for that
Hmm it´s on... in V 1.40
or did I get something totally wrong?
Or d´y mean the 2.60?
Flashed.
I have tested GPS fix just after flashing Panosha light 4 Rom. First fix in 9 seconds,with IGO8 (very good),second and third fixes instantly. Now I will test 2G and 3G signal in some "bad zone"
Cheers bepe, will check it out. I've not been impressed so far with any of the updates. What are you using in Germany?
I gona try to test it on 0.53!
Woooowwwww
Better signal in hsdpa, for sure and for the first time
11 satellites with tomtom 7 in five seconds....., man it rocks
woooowwwwww
forgot one thing: rom project diamond V2; and i'm testing at this time again; there is a big progress in terms of reception quality, here in france with sfr 3G+
Energy feedback ?
Please guys,
Don't forget to talk about energy consumption with this radio.
Thanks.
..me too stupid
Grrr
Today it´s not my day...
Gimme a hint...
Unsigned Olinex HardSPL 1.40
Custom RUU
When Flashing i get a "wrong device ID" error after 5% (Invalid MODEL ID)
(the RUU says that the Radio Image is V 0.0.0.0)
Any Clues?
about energy consumption, this is too early to say anything.....
Correct me if I am wrong, but GPS has nothing to do with Radio rom?
Riel said:
Correct me if I am wrong, but GPS has nothing to do with Radio rom?
Click to expand...
Click to collapse
Hello Riel,
Are you sure ?
The GPS uses a communication protocol, right ?
What does the radio ROM on our PDA Phone ?
It all runs on a single Chip inside our Diamonds ;-)
jkb770 said:
Grrr
Today it´s not my day...
Gimme a hint...
Unsigned Olinex HardSPL 1.40
Custom RUU
When Flashing i get a "wrong device ID" error after 5% (Invalid MODEL ID)
(the RUU says that the Radio Image is V 0.0.0.0)
Any Clues?
Click to expand...
Click to collapse
How did you start the RUU? Try it from bootloader menu.
1, Bootloader
2, Start ruu.
So, I give you my feedback :
This ROM Radio give me only an EDGE connection.
Where I am, usualy I get a poor reception of 3G signal with .03 an .05 ROM.
But, with the .02.25.11 I've got no 3G signal.
No difference for me with the GPS fix.
For the moment, I'll back to the .05 one.
Hi, I was wondering if someone could help me out with detailed instructions.
I am faily new to the world of PDA's and smart phones.
I just bought HTC touch Pro 2 from Telstra. Its all customised with Telstra/Bigpond.
My question is how can I remove Telstra customisation completely from the phone?
FYI,
Device Information.
Rom Version: 1019.841.3 (51489) WWE
Rom Date: 06/04/2009
Radio Version: 3.44.25.27
Windows 6.1
Your help would be highly appreciated. Also, could you please provide complete steps for the solution you provide.
Thanks for your help
Nothing much you can do. You can flash a custom ROM if you want to totally remove Telstra stuff.
Having said that there are some good stuff in Telstra ROM. Free web browsing to certain sites (BigPond, Sensis, Yellow Pages, Trading Post, etc.....) And there are free apps like WhereIs where the data download is not counted towards your usage. And there are 2 free apps Jetcet Print and Jetcet Presenter. The former for printing directly from phone and the latter for creating/editing Powerpoint slides.
But if you don't want any of these, you can always flash a custom ROM of your choice.
Yep just flash a custom rom simple
If you don't mind me asking, did you buy the phone outright or on a plan?
If outright, how much did you pay?
i'd like to get rid of the the telstra things too
phrak, i just bought mine yesterday at harvey norman, it was $1479 outright and with extended warranty (ex wty was 99)
pinkdiamonds said:
i'd like to get rid of the the telstra things too
phrak, i just bought mine yesterday at harvey norman, it was $1479 outright and with extended warranty (ex wty was 99)
Click to expand...
Click to collapse
Well you can always flash a cooked ROM if you like. I haven't yet as I'm quite happy with the Telstra ROM. I don't like the purple color theme so I installed another theme. I am quite happy with what I have got so far. Would wait for Telstra WM6.5 upgrade and see if it is any good.
You can manually remove Telstra items by editing registry
Check this forum.
http://forums.whirlpool.net.au/forum-replies-archive.cfm/1286616.html
Hi Guys
anyone know how i can get back my Original Telstra rom !
thanks
Touch Pro 2 Sprint on NextG
Hi I just got a Touch Pro 2 Sprint CDMA GSM version from the USA. I know you'd probably wonder why but because it has the inbuilt 3.5mm headphone jack. I unlocked everything on the phone and changed the radio to the 2.05.00WU (USCC test edited) version, changed the ROM to try the 6.5.3 energy rom. I know the phone supports CDMA 850. But aren't sure if it's now possible to get it to work on NextG.
Is anyone able to confirm if it's possible? I think it runs on the CDMA2000 1X 1900/800 band. And from what I've been reading it mightn't support the 2100 band, so mightn't be able to get it to work at all.
I'd like one with the headphone jack but like the keyboard also. Don't really want a Touch HD2 thought they would be alright with the 1Ghz CPU.
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
I have the same problem !
Hi there, it sounds like Im in the same boat as you are or were... I also have a RHOD110 from Telstra but I want to upgrade it to win 6.5 and I'm just not sure which ROM will be applicable a) for this model or b) for the Australia service (3g)
I wonder did you manage to get this sorted out and would you be kind enough to give me any info that may help from your own experence ?
Thanks in advance !
I have the same problem ! HELP NEEDED
ultramag69 said:
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
Click to expand...
Click to collapse
I have the same problem !
Hi there, it sounds like Im in the same boat as you are or were... I also have a RHOD110 from Telstra but I want to upgrade it to win 6.5 and I'm just not sure which ROM will be applicable a) for this model or b) for the Australia service (3g)
I wonder did you manage to get this sorted out and would you be kind enough to give me any info that may help from your own experence ?
Thanks in advance !
ultramag69 said:
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
Click to expand...
Click to collapse
Hi there, I'm kinda new at all this as well and I'm in the same boat as you are or were. I also have a Telstra RHOD110 and I want to upgrade to win 6.5, however, Im just not sure about a) which rom upgrade will work on the 110 or b) which one will be compatable with Australian 3G services ?
ANY help or assistance in this area will be greatfully appreciated !
Thanks in Advance
Download & install enablerpinew.cab. You should then be able to Hard SPL.. I also have Rhod110 from Telstra.
Next G works fine, its a hardware feature so it will always pick up Next G, but you may need to get the GPRS settings from Telstra and manually input them.
Use Manual Hard SPL if auto doesn't work, just need to install enablerpinew.cab 1st, and only once... After that any rom works finre...
Cheers...
ultramag69 said:
Download & install enablerpinew.cab. You should then be able to Hard SPL.. I also have Rhod110 from Telstra.
Next G works fine, its a hardware feature so it will always pick up Next G, but you may need to get the GPRS settings from Telstra and manually input them.
Use Manual Hard SPL if auto doesn't work, just need to install enablerpinew.cab 1st, and only once... After that any rom works finre...
Cheers...
Click to expand...
Click to collapse
I have an import RHOD100 that I bought SH. I have Flashed it with both the Aus Telstra Roms and neither seems to access 3G signal. Does this mean the phone physically cant or is there something else I can do???
FYI it actually gets better coverage than my Snap did and that was a telsta phone. But I dont know what the coverage will be like further out of town.
Im running:
1.86.710.3 WWE Rom
4.49.25.17
RHOD100
T7373
i myself want an RHOD110 because of the fact it is the AU model :/