Related
Hi guys,
Am doing my own ROM and would basically like to completely drop the entire contents of the OEMAPPS folder (I'm using the WM6 Dopod ROM for OEM and Abusalza's WM6.1 kitchen for SYS). This is pretty much because as far as I can tell everything in there could be installed by CAB later and most of it has updated versions available. However, I want the camera, which is in there...
Could anyone direct me to a Hermes camera CAB or OEM package (CAB preferred)? I've located a few camera cabs about for other devices and have tried a few but can't find one that works on the Hermes...
Cheers for the help...
You should be able to use the Camera OEM files from Pandora Kitchen. Or for that matter any other Hermes Camera OEM files.
Ive completely removed the camera from my ROM, added ateksoft coolcam instead...totally rocks.
Remember there aint just the HTC cam app that you can use!
mrvanx said:
Ive completely removed the camera from my ROM, added ateksoft coolcam instead...totally rocks.
Remember there aint just the HTC cam app that you can use!
Click to expand...
Click to collapse
And what of CoolCam version are you using?
I, it did not work: (
I have refused to run the camera.
He writes that it is not enough space in the repository
No FTP or there - not found CAB installing cameras. And in general, FTP why all canceled on hermes .
Hi all, i have complety translated, .rgu / .dsm / .bmp / dpi 96 to 192 / 0409 to 0406.
from 20924.
But, when i cook it, and flash my phone, it dosen't book. I can see the version, but i can't not come to wm6 startscreen.
Do some1 know what it could be ?
Could some1 please look at my files maybe :/?
http://rapidshare.com/files/161467646/sys.rar
Bump, no one want to look in it and help me ??
Search for and download a tool called G'reloc.
A common issue with ported OS builds is that they fail to boot due to improperly coded/placed files. G'reloc will fix this for you. Just run it right before cooking, and then once compiled and flashed, your ROM should boot fine.
*You will need to find the correct codes for G'reloc and a Diamond ROM. I have only used this tool on the Kaiser, so I cannot tell you what they are.
NotATreoFan said:
Search for and download a tool called G'reloc.
A common issue with ported OS builds is that they fail to boot due to improperly coded/placed files. G'reloc will fix this for you. Just run it right before cooking, and then once compiled and flashed, your ROM should boot fine.
*You will need to find the correct codes for G'reloc and a Diamond ROM. I have only used this tool on the Kaiser, so I cannot tell you what they are.
Click to expand...
Click to collapse
As I can see, my package builder+buildos run it before it is done.
But anyway, could allways try it ), what shall i put in ? Some1 knows it ?
danny_and_2 said:
As I can see, my package builder+buildos run it before it is done.
But anyway, could allways try it ), what shall i put in ? Some1 knows it ?
Click to expand...
Click to collapse
I tried using a newer BuildOS for the Kaiser that included G'reloc, and it never worked properly. I would run G'reloc on it's own, and then uncheck the box to run it as part of BuildOS.
If those values are auto filled in for you, then give it a shot with them. Worst case, the phone still doesn't boot.
NotATreoFan said:
I tried using a newer BuildOS for the Kaiser that included G'reloc, and it never worked properly. I would run G'reloc on it's own, and then uncheck the box to run it as part of BuildOS.
If those values are auto filled in for you, then give it a shot with them. Worst case, the phone still doesn't boot.
Click to expand...
Click to collapse
Yes they just came automatic, so. Yes i will try that one, will report back if it dosen't
--- Edit ---
I couldn't i get an I/O error 105. ? Some1 knows what this it ?
--
Run-time error 105: File not open for output.
This error occurs if you try to use standard input and output functions
like Readln and Writeln without the Uses WinCRT; statement.
To correct this error, add Uses WinCRT; to your program.
How exactly did you translate the 96.DPI files?
Safe yourself the headaches and use the Diamond 1.96 as a base.
That would give you all the SYS 192 dpi files you need.
Are you making the ROM true 0406?
Or just translating or renaming the 0409.mui files?
Noonski said:
How exactly did you translate the 96.DPI files?
Click to expand...
Click to collapse
I have copyed the files from the diamond (192) to it.
Noonski said:
Safe yourself the headaches and use the Diamond 1.96 as a base.
That would give you all the SYS 192 dpi files you need.
Click to expand...
Click to collapse
I also would, but it ain't released on danish
Noonski said:
Are you making the ROM true 0406?
Or just translating or renaming the 0409.mui files?
Click to expand...
Click to collapse
I have copied the danish 0406.mui files, and changed it in every .rgu and .dsm file.
Bump, bump, bump.
Must be some1 out there, there can help me find my mistake ;/
danny_and_2 said:
Must be some1 out there, there can help me find my mistake ;/
Click to expand...
Click to collapse
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
if you have Greloc error replace files mentioned in error
try this.
ask if you need help
xboxmod said:
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
if you have Greloc error replace files mentioned in error
try this.
ask if you need help
Click to expand...
Click to collapse
Hi there.
Thanks for you guide, I'll try it right away.
And I will say if I run into a problem.
xboxmod said:
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Click to expand...
Click to collapse
They aren't in my kitchen with this rom. Don't know why.
xboxmod said:
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
Click to expand...
Click to collapse
It boot, and it works. Haven't looked so much on the rom, just verify'ed the xip version.
xboxmod said:
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
Click to expand...
Click to collapse
I have tried what you said, but the mobile just won't boot, and i don't know why ! /:
I think i need some more files?
xboxmod said:
if you have Greloc error replace files mentioned in error
Click to expand...
Click to collapse
I don't have that.
have a look here :
http://forum.xda-developers.com:80/showthread.php?t=379598
TekTonik said:
have a look here :
http://forum.xda-developers.com:80/showthread.php?t=379598
Click to expand...
Click to collapse
Hi there, trust me. I have looked the thread many times ..
Anyway, i got an update.
I have get the phone to boot, with the orginal OS & OSFILES.. Now i just need to find what files i need to have, to get it boot..
But i still got a bug, when it boot, touchflo3d won't start, it just skips. ?
The problem you are facing might be (99%) because of improper XIP porting. Just for suggestion, go through my XIP porting guide (in my signature) and try again with a working 20924 XIP (if you cant find one then I'll up the xip.bin from which I ported and am using)
Using original OS folder would not qualify as SYS porting If you check the SYS build no, you will see the original no and not the ported build
ababrekar said:
The problem you are facing might be (99%) because of improper XIP porting. Just for suggestion, go through my XIP porting guide (in my signature) and try again with a working 20924 XIP (if you cant find one then I'll up the xip.bin from which I ported and am using)
Click to expand...
Click to collapse
Hi there.
I finally got it to work (more or less), someone, know the files i have to keep in the shell ?, it wont lunch flo3d. :S ?
Some1 know why ?
ababrekar said:
Using original OS folder would not qualify as SYS porting If you check the SYS build no, you will see the original no and not the ported build
Click to expand...
Click to collapse
But i needed to find out, witch folder there was stopping me from booting, and that was my answer , now i just need to find out what files i have to keep, and there are only 587 files..
I will report back soon
anything new about an issue, I try to port build 20757 from BlackStone and I'm facing the same problem too : replacing SYS only doesn't boot
Need help porting sys folder..
I've successfully ported XIP to 20757 and now i've been trying to port the sys build folder 20757 and up, from multiple roms, such as the xperia x1 roms, the blackstone roms, and other's from the site.
But all of my attempts has fail, so was hoping someone could tell me what im doing wrong.
First sys attempt i tried was;
How to port a SYS folder
Open your old SYS folder and copy the .VM and WinCENLS_WWE folders into your new SYS folder
Go to your old SYS\Shell and copy shell32.exe and shellres.dll into your new SYS\Shell
found here http://forum.xda-developers.com/showthread.php?t=389772
Second i tired, to port it from a thread on the kaiser forum, http://forum.xda-developers.com/showthread.php?t=437264
and third i tried this following guide from the elf forms, http://forum.xda-developers.com/showthread.php?t=379598
so for short
1. made 1 folder for old sys, and 1 for new system with the build number
2. copy .vm .rom WinCENLS_WWE, shell/shellresand shell/shell32 folder, with my already ported XIP
3. swap out the res folder like 800 and 640 ones for the diamond, (where ever it is needed to port the rom)
4. then ran g'reloc
so yeah finally when i tried all this, form the guide, it doesnt work
What about the easiest way?
Take a look here:
http://forum.xda-developers.com/showthread.php?t=452779
Ervius's tool is to port XIP
To port SYS is the easiest porting Simply run Greloc on old SYS and note all the values. Then run Greloc on new SYS and change the values as per old SYS. No replacement needed, no swapping required
Simple!
ababrekar said:
Ervius's tool is to port XIP
To port SYS is the easiest porting Simply run Greloc on old SYS and note all the values. Then run Greloc on new SYS and change the values as per old SYS. No replacement needed, no swapping required
Simple!
Click to expand...
Click to collapse
I thought that to but every time i tried to port the Blacstone sys and Greloc
the rom doesnt boot, I have tried many times and allways the same result.
havent test for a wile, the xip port I get whit your exellent manual xip port but not the sys, so now I have a rom os 20757 Build 19665
have you tried replacing all except the Metadata folder ?
for your XIP which is the base used 1.93, 1.96, 1.97 ?
I have tried the xiportereex tool but some modules are missing, so I tryied to add it by myself, it boot but sometime touch screen doesn't responde at first tap, very strange, I have also a pb with default ringtone witch is not the one it should be by mxipupdate
hi
thank you for your reply everyone but several attempts trying you methods but none has worked ; ;
UPDATE; i give up trying to port sys build, thnx for you help everyone.
Same problem for me, if I try all these method in order to port the sys 20764 ( blackstone) to me ELF, the phone don't boot :-(
if the problem is running poutlook, please check if you have custsat.dll in your rom.
if removed, poutlook won't run.
This is the sam exact problem i'm running into. I can't just not port the SYS because the XIP i'm using opens the windows in a tiny little corner in the top left hand corner. Has anyone figured out how to actually port the SYS since none of the tutorials seem to work.
Hi All,
Try this:
1. Copy all modules and dsm ONLY from these few folders (BaseApps, Shell, Phone, PhoneRedist and Redist) from new SYS to your old SYS folder. No need copy ***_DPI_*** (images), ***_0409 / ***_0804 (language files) and the rgu because they never change even how high the build number goes
2. Copy gwes.exe from new build OS folder to your OS folder (if you don't want to get small little window on the top left corner)
3. g'reloc
4. Cook
Good luck !
Bxsteez said:
a tiny little corner in the top left hand corner
Click to expand...
Click to collapse
take gwes.exe from a vga rom and replace that... you have same problem I had the sys was from a no vga rom and when I took the gwes from my stock rom it make the trick gwes.exe u find in Os folder
Vic5870 said:
Hi All,
Try this:
1. Copy all modules and dsm ONLY from these few folders (BaseApps, Shell, Phone, PhoneRedist and Redist) from new SYS to your old SYS folder. No need copy ***_DPI_*** (images), ***_0409 / ***_0804 (language files) and the rgu because they never change even how high the build number goes
2. Copy gwes.exe from new build OS folder to your OS folder (if you don't want to get small little window on the top left corner)
3. g'reloc
4. Cook
Good luck !
Click to expand...
Click to collapse
In fact, you can take the rest of the OS folder too, with the exception of the rgu and ossvcs
omaga said:
take gwes.exe from a vga rom and replace that... you have same problem I had the sys was from a no vga rom and when I took the gwes from my stock rom it make the trick gwes.exe u find in Os folder
Click to expand...
Click to collapse
I had this problem when i was porting the Touch HD ROM to the Xperia X1 and thats wvga to wvga. I honestly thought porting the SYS would be the easy part but the SYS is why my phone doesn't boot up it just sits there
Bxsteez said:
I honestly thought porting the SYS would be the easy part but the SYS is why my phone doesn't boot up it just sits there
Click to expand...
Click to collapse
Ye I thought that sys is the easy part I got so many sys port that the rom doesnt boot. Now i get 2 in a row 21109 and 21014 sudden and If I remember right I have allways done the same way
Thats the one that i'm working on now. I'm trying to port the 21109 from the touch pro to the xperia but i can't get it to work. Can u give me any tips?
Bxsteez said:
Thats the one that i'm working on now. I'm trying to port the 21109 from the touch pro to the xperia but i can't get it to work. Can u give me any tips?
Click to expand...
Click to collapse
Maybe you should post in the X-Peria ROM dev. forum!?
I have but as we all know the xperia doesn't get as much attention as to the full blown htc devices. I figure that the porting method should be about the same with the exception of changing some things based on resolution. Am i wrong?
Have you deleted some folders from official HD SYS??
If yes, notice that the rom doesn't boot without SqlCeMobile and SqlCeMobile_Lang_0409 folders. I'm speaking from my experience with HD.
And I remember I've ported these official builds to Toshiba G900 without problems. Then, make attention to these things too.
And control if into your original SYS, you have some different folders in comparison to the new SYS.
Another thing, Ervius xipporterex rev-35, deletes some things from xip, but it works perfect in that way. The only thing you have to notice, is that it deletes WinCENLS_WWE from xip, then you have to add it into SYS folder.
@Bxsteez,
chek your 21109 SYS, and change mxip_system.vol(into Shell), with your original and see if mxipcold_wpc_2.provxml is into Base_DPI_192 folder, if not, copy your original one there. Change MobileCalculator.exe into baseapps folder too.
Just gave this a shot and nothing works again.... I can't even port the XIP and use the standard SYS and get it to boot. I wonder if i'm using a some corrupted build of 21109. Can someone point me in the direction of where to get OS CE 21109 and 21109 build?
Search on ppcgeeks the calkulins kitchen for diamond, then extract the xip from os.nb.payload and use that to port, worked for me with ervius xipporterex-35.
And make those changes into SYS folder, they are needed to boot properly.
hello everyone,im new to the kitchen world
After reading lots of tours I decide to build a kichen by myself
here is my step
1. I succefully ported XIP part, my trinity boot
2. I copy directly the new SYS (which is from wm6.5 emulator by "GN.exe OS.bin") to my visualkichen
3 Build
the problem is
everything seems work except the phone, the storage card, the camera. and the icons in setting panels.
I went to windows folder, launch the specificate exe files in the setting panels, they all work.
i tried to copy SYS from the other kitchen, no problem anymore.
its pritty weird, did I miss sth to enable the phone fonnction?
thx for all your advices
I have a question: How to uninstall JBlend preinstalled by the producer in the phone? I installed the esmertec jbed but there is no icon in "programs". I have MDA Compact IV
I have the same issue. I can't find any way to uninstall my existing JBlend. Even reinstalling with new JBlend makes it worse, my java games wont run & install
My JBlend is preinstalled with my Omnia.
I'm currently having issues to move the existing /windows folder to /My Storage.
I have tried the trick for the JBlend, but it didn't work for my case.
When I put back the java folder in Windows folder, it works as normal.
Anyone can advise me in this matter ? I'm stucked in this problem.
If it's a ROM application then I think that you can not remove it.
[check file properties to see if it's a ROM file or not]
This is the main reason that made me change my stock ROM.
Then again I have just started to learn about ROM flashing & cooking so correct me people if I am wrong.
I used Gen.Y R5.3 MultiLANG Kitchen to disable/enable applicatins in the ROM & cooked my first clean ROM
(you can actually see Jblend disabled in step 3 of this kitchen).