Related
hi all,
I'm from singapore and recently have bought a htc hero. I wanted to load modaco's rom but failed. this is what i have experienced.i tried the guide on adb commands but it gave me the error "remote: failed". subsequently i try the flashrec guide but the flashrec gave me invalid error.
Can someone help?
There are my phone details:
Firmware:1.5
build number: 2.73.707.9.146733 CL#62020 release-keys
software version: 1.0.0.A6288
tianci86 said:
hi all,
I'm from singapore and recently have bought a htc hero. I wanted to load modaco's rom but failed. this is what i have experienced.i tried the guide on adb commands but it gave me the error "remote: failed". subsequently i try the flashrec guide but the flashrec gave me invalid error.
Can someone help?
There are my phone details:
Firmware:1.5
build number: 2.73.707.9.146733 CL#62020 release-keys
software version: 1.0.0.A6288
Click to expand...
Click to collapse
one assumes that you have already rooted your HTC Hero ?
If not then follow this
http://theunlockr.com/2009/08/27/how-to-root-your-htc-hero-in-one-click/
once that is done then follow this
http://theunlockr.com/2009/08/27/how-to-load-a-custom-rom-on-your-htc-hero/
This worked like a charm for me so I assume that it should work for you as well
Hope this helps
Devchef1
Devchef1 said:
one assumes that you have already rooted your HTC Hero ?
If not then follow this
http://theunlockr.com/2009/08/27/how-to-root-your-htc-hero-in-one-click/
once that is done then follow this
http://theunlockr.com/2009/08/27/how-to-load-a-custom-rom-on-your-htc-hero/
This worked like a charm for me so I assume that it should work for you as well
Hope this helps
Devchef1
Click to expand...
Click to collapse
hi, i havent root my hero. i followed the guide and could not load Amon Ra’s Hero Recovery Image into my phone. there's error
Since you are in Asia you likely have the 2.73.707.9 ROM you can check this under Settings/About Phone. Please see this thread:
http://forum.xda-developers.com/showthread.php?t=563256
there is no way to gain root and flash ROMs onto this release at this time
duplicate post
Whats a G3?
here everyone calls the Hero the G3
csasek said:
duplicate post
Click to expand...
Click to collapse
u also stuck with this version too?
csasek said:
here everyone calls the Hero the G3
Click to expand...
Click to collapse
Where, China? I've heard it called the G2 by virtue of T-Mobile branding it the G2 Touch, but never the G3!
Regards,
Dave
I have this model also, just wondering when we are able to root the hero and install different roms will it enable different android market? I'm in the US and am lacking apps that should be present e.g Pandora, ebuddy etc.
I was wondering if this way of force updating would work?
download the official rom version 1.76.405.x firmware (not rooted),
boot up the unit using home+power (to boot into recovery);
extract the official rom's rom.zip and rename into update.zip
put that update.zip into sdcard's root
on the device, apply the update in the recovery.
?
kazuni said:
I was wondering if this way of force updating would work?
download the official rom version 1.76.405.x firmware (not rooted),
boot up the unit using home+power (to boot into recovery);
extract the official rom's rom.zip and rename into update.zip
put that update.zip into sdcard's root
on the device, apply the update in the recovery.
?
Click to expand...
Click to collapse
try it, but i doubt it will work because it will check the CID in the rom.zip(or renamed to update.zip) file and that ROM does not contain CID's needed for most phones.
see here
http://forum.xda-developers.com/showthread.php?t=569730
Log:
Code:
-- Install from sdcard...
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(bad)
Installation aborted.
I guess that's their meaning of non-CID'd rom reply?
kazuni said:
Log:
Code:
-- Install from sdcard...
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(bad)
Installation aborted.
I guess that's their meaning of non-CID'd rom reply?
Click to expand...
Click to collapse
uhm, could be, or it doesn't like the rom.zip (altough renamed to update.zip) zip file, which makes sence as we can create update.zip files and sign them ourselfs (stuff that for example paul (modaco) does) i need more playing time myself, but you can try and creating a new zip with the contents of the rom.zip and sign it, then look if that works....but i'm doubtful
funny thing is, i've downloaded the signed rom from modaco, (they are signed, as far as i can be told by the file name), and tried to flash it again using the same method:
log:
Code:
-- Install from sdcard...
Finding update package...
Opening update package...
Veryfiying update package...
E:No signature (740 files)
E:Verification failed
Installation aborted.
still no go.
does renaming a file affect the signature?
kazuni said:
funny thing is, i've downloaded the signed rom from modaco, (they are signed, as far as i can be told by the file name), and tried to flash it again using the same method:
log:
Code:
-- Install from sdcard...
Finding update package...
Opening update package...
Veryfiying update package...
E:No signature (740 files)
E:Verification failed
Installation aborted.
still no go.
does renaming a file affect the signature?
Click to expand...
Click to collapse
no, but the type of signing is the problem, the update.zip (with cert/sign files inside the zip) is a different kind then doing an edit on the physical zip file and changing (signing) and thats whats being checked and we currently can't duplicate (or re-sign a changed rom.zip)
I found a solution after being told it was not possible.
The Brown Hero I purchased was also an Asian version and had no Market.
I was so scared and frustrated at first because everyone said there was no solution.
But I found one!
*1. Download Linda file manager from here and install since you don't have the market! (I had a copy already on my sdcard) goto Settings, Applications, and make sure Unknown source is checked ON.
*2. On your phone, goto Settings, SD card and phone storage, and click Unmount SD card.
*3. Then click Format SD card (it should automatically remount after this)
*4. Plug the phone into the compuer via USB, then pull down the notification bar and click on the SD card notification. Then click mount.
*5 Download the Flashrec apk from this link: http://zenthought.org/system/files/asset/2/flashrec-1.1.2-20090909.apk and install using Linda File manager.
*6. Download Amon_RA_Herov1.2.2 Recovery image and place on root of sdcard
*7. Open the FlashRec program and click on Backup Recovery Image and wait for it to finish.
*8. Once done, click on the empty text box in the FlashRec program and type
/sdcard/Recovery-RA-HERO-v1.2.2.img
Then click on the Flash Custom RecoveryImage button and wait for it to finish.
*9. Turn off the phone and turn it on into Recovery mode by holding down Home and Power to turn it on (keep holding until the recovery screen comes up has a bunch of text on a black background). So long as that screen comes up, you have done it correctly and now you can load this rom which is HTC Generic 2.73.405.5
It's also referred to as Modaco version 2.2, it's what I'm currently using.
*10. Place that rom on the root of you're sdcard and use option Apply sdcard: choose zip option and flash! Once done reboot and you're all set and will have The Android Market and all the goodness that rooting provides!
Hope this helps!
You had the same ROM version as mentioned in the original post? ^^
plbe said:
You had the same ROM version as mentioned in the original post? ^^
Click to expand...
Click to collapse
My version was a little different but it was an Asian version and did not come with the Android Market installed and had SlideMe market instead.
Here is a screen shot:
i have tried the method u suggested but to no avail. ya, your version of hero is slightly different from mine.
CURRENTLY UNDER INVESTIGATION
Just to let everyone know
LINKS REMOVED.
Gonna try it later tonight
Hi, I download ROM P1000XWJJ7 ## and unrar. in subdirectory is folder name
P1000XXJJ3... This is new ? Where is change log ?
well i also noticed that but could be a typo.. dunno, you would have to ask samfirmware guys because i haven't had the change to flash it myself.
Just successfully flashed this over JJ4 and everything works fine.
zyborg said:
Just successfully flashed this over JJ4 and everything works fine.
Click to expand...
Click to collapse
Which pit file did you use? I used P1_add_hidden.pit (with repartion active), and now my tab does not boot...
After the flash and rebbot I got this error:
"E: Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI for format and reboot actions.
copy default media content failed."
I have used P1_20100909.pit with repartition, P1_add_hidden.pit with and without repartition...
Any suggestions?
Thanks...
mascian said:
Which pit file did you use? I used P1_add_hidden.pit (with repartion active), and now my tab does not boot...
Click to expand...
Click to collapse
It is not a full flash. You should flash this over a working tab with no repartition.
So flash back to a firmware which is a full flash (like XWJJ4) and the flash this one with no repartition. Should work.
Can someone who flashed this post the build date for this firmware?
*#*#44336#*#*
Thanks.
clubtech said:
Can someone who flashed this post the build date for this firmware?
*#*#44336#*#*
Thanks.
Click to expand...
Click to collapse
Ok, my mistake .. thanks a lot clubtech!
The build date is:
2010.10.30
October 30, 2010.
clubtech said:
Can someone who flashed this post the build date for this firmware?
*#*#44336#*#*
Thanks.
Click to expand...
Click to collapse
Step by step upgrade instruction?
Hi,
can anyone explain step by step instruction to upgrade?
I am with P1000XXJID and when I try to upgrade there is an error, then I try with re-partition and now there is problem with the boot of the device. Any help?
Thank you
teodorp said:
Hi,
can anyone explain step by step instruction to upgrade?
I am with P1000XXJID and when I try to upgrade there is an error, then I try with re-partition and now there is problem with the boot of the device. Any help?
Thank you
Click to expand...
Click to collapse
READ my reply a few posts up.
clubtech said:
READ my reply a few posts up.
Click to expand...
Click to collapse
I read it but I do not know how to install XWJJ4 after the message
"E: Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI for format and reboot actions.
copy default media content failed."
Can you help me?
mascian said:
After the flash and rebbot I got this error:
"E: Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI for format and reboot actions.
copy default media content failed."
I have used P1_20100909.pit with repartition, P1_add_hidden.pit with and without repartition...
Any suggestions?
Thanks...
Click to expand...
Click to collapse
Hi,
I have the same problem, can you help me with instruction how I can resolve this?
teodorp said:
Hi,
I have the same problem, can you help me with instruction how I can resolve this?
Click to expand...
Click to collapse
OK, I got the screen of death going from JID to JJ7. However, note that from the screen'o'death, you can still use Odin and flash away.
So, I read a bit, saw JJ6 was a full flash, grabbed that off samfirmware, flashed it (with the pit, repartition) that was included in the archive.
Then, with that base, I then just flashed JJ7 by itself (as the PDA) and that worked fine.
So no worries.
I am not entirely sold on JJ7 however. Doesn't feel as smooth as JID did.
Gotta play more though.
spekesel said:
OK, I got the screen of death going from JID to JJ7. However, note that from the screen'o'death, you can still use Odin and flash away.
So, I read a bit, saw JJ6 was a full flash, grabbed that off samfirmware, flashed it (with the pit, repartition) that was included in the archive.
Then, with that base, I then just flashed JJ7 by itself (as the PDA) and that worked fine.
So no worries.
I am not entirely sold on JJ7 however. Doesn't feel as smooth as JID did.
Gotta play more though.
Click to expand...
Click to collapse
Pls, give me the link to the JJ6 - I can not found it in in samfirmware
teodorp said:
Pls, give me the link to the JJ6 - I can not found it in in samfirmware
Click to expand...
Click to collapse
ahem, JJ4 I mean. My bad
spekesel said:
ahem, JJ4 I mean. My bad
Click to expand...
Click to collapse
JJ4 and I am trying with P1_EUR.PIT and P1_add_hidden.PIT but without success. Which PIT did you use?
teodorp said:
JJ4 and I am trying with P1_EUR.PIT and P1_add_hidden.PIT but without success. Which PIT did you use?
Click to expand...
Click to collapse
I used the P1_add_hidden.PIT.
I used the PIT, the PDA/Modem/CSC, without repartition selected to flash JJ4. That worked for me. (from a failed JID -> JJ7 flash and screen'o'death)
I am however back to JID, I found JJ7 to be kinda slow. But it could also be I suck at knowing what PIT with which firmware.
Hi there,
for some time now I have been trying to update B116 to B117 getting the same error message every time:
View attachment 2311424
assert failed: apply_patch_check ("/system/app/HwCloudDrive.apk" ... )
E:Error in /sdcard/HwOUC/update.zip
(status 7)
I am guessing the update does not match the HwCloudDrive.apk (not sure, new to this). What have I tried:
1. Check the /system/app/HwCloudDrive.apk - not found in the folder, nor anywhere else on the phone. Searched the web, downloaded one apk, install failed for no reason (reason not stated, just that it failed)
2. Restoring factory settings several times
3. re-downloading many times
4. updating online as well as localy
So far nothing worked out. Some details about my phone:
Its P6-U06, android 4.2.2, baseband IMC1202_PENTA, kernel 3.0.8-00821, build B116SP01, bought in China, using New Zealand SIM (could this be a problem?)
Any help would be much appreciated
Thanks to all!
Same issue updating error
Hi! I'm stucked with the same problem, I have tried to update it from external, wipe all data but nothing is worked, did you find a way??
ouzoliny said:
Hi there,
for some time now I have been trying to update B116 to B117 getting the same error message every time:
View attachment 2311424
assert failed: apply_patch_check ("/system/app/HwCloudDrive.apk" ... )
E:Error in /sdcard/HwOUC/update.zip
(status 7)
I am guessing the update does not match the HwCloudDrive.apk (not sure, new to this). What have I tried:
1. Check the /system/app/HwCloudDrive.apk - not found in the folder, nor anywhere else on the phone. Searched the web, downloaded one apk, install failed for no reason (reason not stated, just that it failed)
2. Restoring factory settings several times
3. re-downloading many times
4. updating online as well as localy
So far nothing worked out. Some details about my phone:
Its P6-U06, android 4.2.2, baseband IMC1202_PENTA, kernel 3.0.8-00821, build B116SP01, bought in China, using New Zealand SIM (could this be a problem?)
Any help would be much appreciated
Thanks to all!
Click to expand...
Click to collapse
Hi there,
nope, I haven't found the way. I tried a few more time since the post, no change, still the same problem. I have posted the message on huawei support, no reply. I'm at the stage of no-trying anymore, waiting for the next update and see...
Mrpinkman said:
Hi! I'm stucked with the same problem, I have tried to update it from external, wipe all data but nothing is worked, did you find a way??
Click to expand...
Click to collapse
I have the same problem
apply_patch_check ("/ system / build.prop")
Is there any solution?
rutenio3 said:
I have the same problem
apply_patch_check ("/ system / build.prop")
Is there any solution?
Click to expand...
Click to collapse
up
rutenio3 said:
I have the same problem
apply_patch_check ("/ system / build.prop")
Is there any solution?
Click to expand...
Click to collapse
There is a non so straight forward way to get it though by editing the "updater-script" file in the [ROMFileName].zip
You will need to unzip, edit the file (remove the line) with notepad and zip it back.
I've able to make it works with P6's MIUI V5 Offline OTA update rom.
extrem23 said:
There is a non so straight forward way to get it though by editing the "updater-script" file in the [ROMFileName].zip
You will need to unzip, edit the file (remove the line) with notepad and zip it back.
I've able to make it works with P6's MIUI V5 Offline OTA update rom.
Click to expand...
Click to collapse
I need more information.
Is very little information as to touch something random change.
A minitutorial would be nice.
thanks
i have the same problem
rutenio3 said:
I need more information.
Is very little information as to touch something random change.
A minitutorial would be nice.
thanks
Click to expand...
Click to collapse
assert faild: apply_patch_check("/system/app/MyBitCast.apk". "7e89b40472e4fe3d1459fb19f02b2901f281cea9".
"01c881b5cd2aad035329684eddd0471644914bb2")
update.zip is not correct
Format Sdcard And Try Again. If It Didnt Work Download Latest B125 And Try Again Hope This Works.
Please supply more info about this fix.
extrem23 said:
There is a non so straight forward way to get it though by editing the "updater-script" file in the [ROMFileName].zip
You will need to unzip, edit the file (remove the line) with notepad and zip it back.
I've able to make it works with P6's MIUI V5 Offline OTA update rom.
Click to expand...
Click to collapse
Please explain: what line should be erased from this file?
Thanks
rainbringer said:
Please explain: what line should be erased from this file?
Thanks
Click to expand...
Click to collapse
Yes please explain a little further. I am having update issues as well.
My Huuawei Ascend Mate MT1-U06 Found an OTA Update HwOUC, I downloaded it, and when I try to apply the update it fails.
I was having problem with flashing cm12.1 zip.
I was getting error "error executing updater binary" in recovery.(Now i flashed it).
How i did it?........
1)I decompressed system.new.dat(which was in the zip) to ext 4...
2) then again decompressed ext4 to output folder(which was the old way to make zips).for more info http://forum.xda-developers.com/and.../how-to-conver-lollipop-dat-files-to-t2978952.
3)then edited updater script using refrence of updater script of mokee zip files(i was able to flash mokee51.1 roms).
voila it flashed successfully.
Now the que is why this happens?Am i the only one who faces this problem.
..God knows how frusted i was due to this.......
dtechgeek said:
I was having problem with flashing cm12.1 zip.
I was getting error "error executing updater binary" in recovery.(Now i flashed it).
How i did it?........
1)I decompressed system.new.dat(which was in the zip) to ext 4...
2) then again decompressed ext4 to output folder(which was the old way to make zips).for more info http://forum.xda-developers.com/and.../how-to-conver-lollipop-dat-files-to-t2978952.
3)then edited updater script using refrence of updater script of mokee zip files(i was able to flash mokee51.1 roms).
voila it flashed successfully.
Now the que is why this happens?Am i the only one who faces this problem.
..God knows how frusted i was due to this.......
Click to expand...
Click to collapse
On what recovery and version was this happened? And thanks for the link you gave, might be i need it in the future, if i have such an issue like yours.
presetz said:
On what recovery and version was this happened? And thanks for the link you gave, might be i need it in the future, if i have such an issue like yours.
Click to expand...
Click to collapse
I tried TWRP 2.8.6.0,philz.cwm....
I am running lineageos-nightly-20170706 on my OnePlus 3 - I've tried to update it using both lineageos-nightly-20170803 and lineageos-nightly-20170810 - both give the same error when TWRP tries to install the file:
assert failed: op3.verify_modem('2017-06-27 21:43:31== "1"
updater process ended with ERROR: 7
Error installing zip file '/data/data/org.lineageos.updater/app_updates/lineage-14.1-20170810-nightly-oneplus3-signed.zip'
I did a full wipe and flash installing this, but I don't want to lose all the config work I've done if I don't have to - so I wanted to try updating this time. Am I doing something wrong or missing something? I download it, then choose Install - it reboots the pphone to TWRP (3.0.4-1), I click Install, then Up a Level so I can find the file in /data/data/org.lineagos.updater/app_updates, select the zip file, and swipe to install it.
Thanks,
Brian
bwgreen9 said:
I am running lineageos-nightly-20170706 on my OnePlus 3 - I've tried to update it using both lineageos-nightly-20170803 and lineageos-nightly-20170810 - both give the same error when TWRP tries to install the file:
assert failed: op3.verify_modem('2017-06-27 21:43:31== "1"
updater process ended with ERROR: 7
Error installing zip file '/data/data/org.lineageos.updater/app_updates/lineage-14.1-20170810-nightly-oneplus3-signed.zip'
I did a full wipe and flash installing this, but I don't want to lose all the config work I've done if I don't have to - so I wanted to try updating this time. Am I doing something wrong or missing something? I download it, then choose Install - it reboots the pphone to TWRP (3.0.4-1), I click Install, then Up a Level so I can find the file in /data/data/org.lineagos.updater/app_updates, select the zip file, and swipe to install it.
Thanks,
Brian
Click to expand...
Click to collapse
Firmware...
I am not an android expert - what do I need, and how do I apply it?
bwgreen9 said:
I am not an android expert - what do I need, and how do I apply it?
Click to expand...
Click to collapse
Well, your firmware is outdated, you need to update it.
This should help you out:
http://lmgtfy.com/?iie=1&q=Oneplus+3+modem+firmware+xda
bwgreen9 said:
I am not an android expert - what do I need, and how do I apply it?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
I flashed this one in recovery 4.1.6 Firmware + Modem, and then i flashed the full zip of the lineage update.