hey guys.
i always get the connection manger when i press the green phone button long. i change it in the system to any other programm but it dont work. is there a script that can help me? or what do i have to do?
Related
Hi All I Really Need Some Help Please My Phone Wont Turn On Its Stuck On Starp Up Boot Screen.,which Means There For I Cant Reset It.and Active Synce Doesnt Reconise The Phone So I Cant Even Install A New Rom On It,iv Presses The Reset Button Loads Of Time With No Joy Can Anyone Help Me Out Please...thanx It Was Working Fine One Day Then Froze On Me And Now It Wont Come On To Windows
Copied from the Wiki page.......
Soft reset: Use the stylus to lightly press and hold the RESET button on the bottom of your device.
Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press SEND to restore factory default, press END to exit', if you press SEND Your device will be set back to factory default settings.than Press "OK" to boot
(The L/R soft keys are the "--" keys just above the the Green phone and Red phone buttons) You can also use clear storage in settings. WARNING!!! HARD RESETTING WILL ERASE EVERYTHING ON YOUR DEVICE. MAKE SURE YOU HAVE A BACKUP!
ok thank you
will try it now ,,but phone is totally stuck on start up screen wont even go in to windows,,but will give it a go ,,cheers...
hi there
thanx allot for your help it did work and managed to reset the phone cheers...your a life saver thanx ....
I'm useing haret 0.5.2 on wm65, polaris. This situation dosent appear every time.
I found there's a rule:
When I hit button RUN, if the system reboots immediately after about 3 sec and starts to scroll white text, and then I hold the button right after I see the text, I can enter the system menu.
BUT, if the system reboots after about 30 sec, however and whenever I hold he button, it dosent work.
Somebody can kindly help me through this problem?
BTW, can I use old version of haret, eg. the version that without RUN button, to run Android 2.1?
---------------- update 20100625 -------------
Still nobody replys~~~~~~~~
BUT I've figured it out myself.
I found that it might have something to do with the file zImage. If I get a proper zImage, I can see the boot menu every time. U can have a try if u r facing the same problem.
And for the second question, the answer is NO.
Me too, sometime I cannot get into boot menu by pressing D-Pad button, but I can use volume up (right softkey) button instead.
I'm using NAND and I think it's because of the nbh file.
Hello guys
I have wildfire with android 2.2.1, these day touch for my phone is not working properly.
* it automatically dials random number in call history
* Touch turns so hard to access (some time)
* Touch wont work at few areas on screen.
* Touch not at all working some times, (if i off the screen and turn on the screen back, then it MAY works but only some times) as a result I cant disconnect any on going calls or incoming calls
* Home Button forgot to do its work some times, if I press HOME button it will work as a selection key.
* Notification screen struck up at the middle or somewhere, not able to drag down the lock screen up or down.
uffff... there are some other issues with my WF.
I have did a factory restore and formated my Memory Card. but it still continues.
can someone let me know what can I do before taking it servicing center.
Have you tried wiping it from the bootloader?
I dont know how to do it...
can u let me know ?
Turn the phone off
To get into HBOOT press and hold volume up and power
And then I think you need to press clear storage.
nejc121 said:
Turn the phone off
To get into HBOOT press and hold volume up and power
And then I think you need to press clear storage.
Click to expand...
Click to collapse
Yes, those instructions are correct, I have did it. Its better as of now. I'll monitor it for more hours (24+) and report back the status for your tweak.
Thanks nejc212
nejc121 said:
Turn the phone off
To get into HBOOT press and hold volume up and power
And then I think you need to press clear storage.
Click to expand...
Click to collapse
To get into hboot, switch off the device and hold the vol down + power button.
There u can clear storage (=factory reset).
-----------------------------------------------------------------------------------------------------------------------------------------------------------
To OP:
Do one thing. Remove the memory card, and format the phone. Donot insert the memory card or connect to any internet networks. Use the phone for a while like this. If u feel it is OK, then ur phone is OK.
Hello to everyone, i want to install this rom on my Gio, but i'm quite confuse about to install patch and icstheme...
do i have to just instal from zip, or before to install zip, do i have to mont data or system?!
thanks :fingers-crossed:
I answered you over PM, but let me say again, maybe someone else will need it.
Yes, you need to mount system before installing patch and icstheme.
RonninDAMN said:
I answered you over PM, but let me say again, maybe someone else will need it.
Yes, you need to mount system before installing patch and icstheme.
Click to expand...
Click to collapse
Yess done, i've done!
but i want to know somethig;
on a address book, when i tap on a contact photo, all desapear, is it normal?!
can i change status bar color?! i think is trasparent, i want set it black!
when i long press home button, and see all open application, i can't close them if i slide left or right, is a bug?!
if i go to the keyboard setting( from message) background is trasparent... it's very annoying!
when i have to connect via usb, i can't press connect button, i have to turn the phone to lanscape mode to see the button connect, is it possible to fix it ?!
I think you use this rom , do you have the same bugs?!
P.s: sorry about my bad english!
cloudseth said:
Yess done, i've done!
but i want to know somethig;
on a address book, when i tap on a contact photo, all desapear, is it normal?!
can i change status bar color?! i think is trasparent, i want set it black!
when i long press home button, and see all open application, i can't close them if i slide left or right, is a bug?!
if i go to the keyboard setting( from message) background is trasparent... it's very annoying!
when i have to connect via usb, i can't press connect button, i have to turn the phone to lanscape mode to see the button connect, is it possible to fix it ?!
I think you use this rom , do you have the same bugs?!
P.s: sorry about my bad english!
Click to expand...
Click to collapse
1. Well, it ins't normal, it's kinda bug.
2. I don't think there's option for that, but you can try with UOTkitchen ( http://uot.dakra.lt/kitchen/ ) to make your own status bar.
3. No it's not a bug, the rom doesn't have that option. Those are just recently used apps, it doesn't affect your ram or something.
4. Yeah, it is annoying.
5. Just press on that big android picture. Picture is like a button.
There are a lot of theme issues, but rom is ok.
Well, i've tried to use uot kitchen , but statusbar doesn't change!
thanks anyway, i'll post this but on official discussion, matz can resolve this problems on next relase!
:fingers-crossed:
Phone : 550ML
Yesterday (2015/12/21, India Time) i got notification about ASUS UI update, I downloaded the updates and press install button, then system automatically got shutdown and not restarted.
Right now when i click on Power button, it shows only battery charging ICON.
I checked the support on http://www.asus.com/support/FAQ/1006346. But dont know how i can solve it. I also checked this forum http://forum.xda-developers.com/zenfone2/help/phone-wont-boot-update-t3126603
please help me to sort out this issue
Thanks
Harry
Hi dude,
If you push on start button for a long time, do you have any vibration ? If not, did you try to start in recovery mode again (start button and volume up ?).