Related
Ok. I decided to write a short tutorial (because it is very very SIMPLE!!! ), how to upgrade any of the ROMs to any of Universal (jasjar, exec, qtek...), because I found 70% of the Universal upgrading etc forum posts are something like: "I can't upgrdae...", "I get an error message..." "coutry ID error..", etc.
1. Download the ROM you want to install
2. Best way to use winRAR to unpack it to a folder
3. There are 3 ROMs in the package: ms_.nbf (ExtendedROM), nk.nbf (CE ROM), radio_.nbf (Radio ROM)
4. Select those (from between this 3 ROMs) which you don't want to install
5. Delete these
6. Copy to the folder my attached file (MaUpgradeUt_noID.exe). This is the file which makes the install workable for all models of Universal.
7. Make your Universal in bootloader mode. (Push Light button + Power button + resetbutton at the same time) A lot of people get error message at the first time if they were not in bootloader mode. Those people can install the ROM the second time. If you are in bootloader mode you won't get error message.
8. Doubleclick to MaUpgradeUt_noID.exe. A window come up with the old ROMs and the new ROMs which will be upgraded. When this windows comes up, it is very important to wait a few seconds (5sec is enough) before you push the upgrade button.
9. Upgrade.
10. Wait until the installation program says in a window: Congratulations. Push OK button.
11. Pull out the USB cable from the Universal.
12. Do a cold reset (push the two menu buttons ("-") on the keyboard + the reset button at the same time (all of this three)
13. Everything should be fine from this time. You have to calibrate the screen and do some tutorial...
(14. If you want your Universal not to install ExtendedROM, make a softreset after setup is complete. (a popup window pops up you have 3 seconds before it installs ExtendedROM))
That's it.
It woked for me anytime in any case with any of Universals.
I hope this will help for lots of people.
Cheers
Cool! 8)
This way I see it is that there are many people out there with these (and many other) basic questions that want answering and indeed the same questions keep cropping up. A post like this is great BUT it's visibility only lasts a couple of days untill it gets swamped by more recent threads - I don't see the mod's stickying anything!!!!!
Hence: this forum could be SO much better if each section had a GUIDES area where people can submit threads like this!
>>>> ANYONE ?? <<<<
Andy
I'm totally agree!
HEY MODERATORS!
underwurlde, I have an alternative suggestion. If moderators don't push this to a special place, we have to write here something like "..." twice a day. :lol: :wink:
Why don't you put it in this forum's wiki resource? I'm sure a lot of users would be very grateful for this information!
wiki.xda-developers.com
Damm it!
How do I go to bootloader mode? and how do I know if I am at it?
Do I have to be with my activesync connected by usb to Qtek9000?
I start the maupgradeut_noid_637 and nothing happens...
Txs
Damm it!
How do I go to bootloader mode? and how do I know if I am at it?
Do I have to be with my activesync connected by usb to Qtek9000?
I start the maupgradeut_noid_637 and nothing happens...
Txs
Click to expand...
Click to collapse
GOD I HATE BEING RIGHT :lol: :lol:
@Tuningszocske - ever watch 'Shawshank Redemption'? - I wonder if a daily 'bump' will piss them off into action as you suggest.
Andy 8)
Deiota said:
Damm it!
How do I go to bootloader mode? and how do I know if I am at it?
Do I have to be with my activesync connected by usb to Qtek9000?
I start the maupgradeut_noid_637 and nothing happens...
Txs
Click to expand...
Click to collapse
Okay. It seems you did not read my first post.
To put your Universal into bootloader mode, read 7th point.
And how do you know you are in bootloader mode?
You can see just a blank screen with the title serial or USB on the top and something like v1.00 on the bottom. You will recognize it.
I hope :?
underwurlde said:
GOD I HATE BEING RIGHT :lol: :lol:
@Tuningszocske - ever watch 'Shawshank Redemption'? - I wonder if a daily 'bump' will piss them off into action as you suggest.
Andy 8)
Click to expand...
Click to collapse
Ever watch??? This is one of my favorite films. But I cannot draw any parallel between this film and your post, but I'm sure it is because I'm hungarian and my english is something that your german So, sleng is standing above my english knowledge.
I just posted some instructions on Wiki - I hope they help
Per the suggestion, I just posted some instructions on Wiki. Take a look an see what you think. Hopefully more can be added and these can be refined to be more understandable. At least it's a start.
Here is the Wiki Universal page http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
This is the three I added, under How to upgrade to the latest ROM (currently 1.30.68)
Detailed Instruction On How To Upgrade with Bootloader method http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Instructions for those stuck on Boot Screen http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
Instructions for those with Country Code error http://wiki.xda-developers.com/index.php?pagename=Instructions for those with Country Code error
Cool!
olliesshop, if you want you can use my tutorial to add more things to the wiki site. I think mixing of your and mine tutorial would be enough for the most helpless people too. I missed from mine removeing SD and SIM card, and not to use USB hub.
I hope, one day people will understand this very very "sofisticated" method.
To Deiota It looks like when you are in bootloader mode without things in the center. (But there are when you completed the upgrade.)
Hello!
Thanks you all for your help!
I've already did the upgrade! But I have a "stupid" (maybe) question.
When I was upgrading my Qtek 9000 with JASJAR_WWE_13076_164_10900_wwe_ship.exe, it appeard a photo of a I-mate PDA, but not Jasjar. Is it OK? Is this ROM for my Qtek 9000 (or Jasjar)?
I realized that the package software that comes with I-mate is best, at least more complete then Qtek! Another thing, why or how is it possible that the same device, comes with WM5 (both) and some features included in I-mate and not in Qtek. I'm talking about the "Device unlocked" that happears in the Today Screen.
I just want to confirm that this ROM is right for me, and that It is best than my Qtek Original one!
Should be ok
From what I understand this imate ROM upgrade should work for all the HTC Universal phones, including; Universal Dopod 900 / Qtek 9000 / MDA Pro / I-mate JASJAR / O2 Xda Exec / SPV M5000 / Qtek v1640. What's amusing is when I did the upgrade to my imate Jasjar it got locked on the blue splash screen (the one with the imate logo) and now I had to ship it in for Warranty service ... time since failure 5 days and counting. I expect it back end of next week at the earliest.
I'm glad it worked for you !!!
Deiota said:
Hello!
Thanks you all for your help!
I've already did the upgrade! But I have a "stupid" (maybe) question.
When I was upgrading my Qtek 9000 with JASJAR_WWE_13076_164_10900_wwe_ship.exe, it appeard a photo of a I-mate PDA, but not Jasjar. Is it OK? Is this ROM for my Qtek 9000 (or Jasjar)?
I realized that the package software that comes with I-mate is best, at least more complete then Qtek! Another thing, why or how is it possible that the same device, comes with WM5 (both) and some features included in I-mate and not in Qtek. I'm talking about the "Device unlocked" that happears in the Today Screen.
I just want to confirm that this ROM is right for me, and that It is best than my Qtek Original one!
Click to expand...
Click to collapse
All the models have just different names but totally the same hardware (with just different paintings) because there are different service providers who want to sell it. Each service provider has a fantasy-name like O2 service provider sells it as Exec, Qtek sells it as 9000, i-mate sells it as Jasjar...
Clear?
off topic, sorry
Yo!
@Tuningszocske,
yeah there is a scene in Shawshank where Andy is trying to get money to build a library so he asks the Governor if he can write a letter - to which he agrees 'write as many as you want':
So he does: One a day. Every day. Unitl he actually gets a response, which effectively says: 'Here's $200, now go away' - So he writes TWO letters every day!!!!! Guess what? He eventually gets what he wants. :lol: This is the parallel I was making re: continually 'bumping' this thread.
The squeaky wheel always gets the grease!
Andy
Not really!
well, first I want to be sure that the Rom JASJAR_WWE_13076_164_10900_wwe_ship.exe is the right for me, since the screen that appear while upgrading has a I-mate K-Jam or something!
Second, I understand that the Software that come with one can be different from another, has it happens here!
But the MAIN Windows Mobile 5, I don't understand how...
The main thing I noticed is the "device unlocked" on today screen...
My usband has a Mio A210 that has WM5 and has the same Today item, "device unlocked". My question is why the Wtek version of Rom doesn't have uit? New version of WM5? Old one? Just different?
Txs,
Deiota
Tuningszocske said:
Deiota said:
Hello!
Thanks you all for your help!
I've already did the upgrade! But I have a "stupid" (maybe) question.
When I was upgrading my Qtek 9000 with JASJAR_WWE_13076_164_10900_wwe_ship.exe, it appeard a photo of a I-mate PDA, but not Jasjar. Is it OK? Is this ROM for my Qtek 9000 (or Jasjar)?
I realized that the package software that comes with I-mate is best, at least more complete then Qtek! Another thing, why or how is it possible that the same device, comes with WM5 (both) and some features included in I-mate and not in Qtek. I'm talking about the "Device unlocked" that happears in the Today Screen.
I just want to confirm that this ROM is right for me, and that It is best than my Qtek Original one!
Click to expand...
Click to collapse
All the models have just different names but totally the same hardware (with just different paintings) because there are different service providers who want to sell it. Each service provider has a fantasy-name like O2 service provider sells it as Exec, Qtek sells it as 9000, i-mate sells it as Jasjar...
Clear?
Click to expand...
Click to collapse
Wiki revised
Tuningszocske said:
Cool!
olliesshop, if you want you can use my tutorial to add more things to the wiki site. I think mixing of your and mine tutorial would be enough for the most helpless people too. I missed from mine removeing SD and SIM card, and not to use USB hub.
I hope, one day people will understand this very very "sofisticated" method.
Click to expand...
Click to collapse
Take a look http://wiki.xda-developers.com/index.php?pagename=HTC_Universal . I updated the "Detailed Instruction On How To Upgrade with Bootloader method" instructions, by merging both. Also, your instructions are shown "as written" in the "Instructions for those with Country Code error". I hope this helps folks.
Re: off topic, sorry
underwurlde said:
Yo!
@Tuningszocske,
yeah there is a scene in Shawshank where Andy is trying to get money to build a library so he asks the Governor if he can write a letter - to which he agrees 'write as many as you want':
So he does: One a day. Every day. Unitl he actually gets a response, which effectively says: 'Here's $200, now go away' - So he writes TWO letters every day!!!!! Guess what? He eventually gets what he wants. :lol: This is the parallel I was making re: continually 'bumping' this thread.
The squeaky wheel always gets the grease!
Andy
Click to expand...
Click to collapse
Hey Under!
I understand now I saw this film a long time ago. I can remember a little bit more now.
Deiota said:
Not really!
well, first I want to be sure that the Rom JASJAR_WWE_13076_164_10900_wwe_ship.exe is the right for me, since the screen that appear while upgrading has a I-mate K-Jam or something!
Second, I understand that the Software that come with one can be different from another, has it happens here!
But the MAIN Windows Mobile 5, I don't understand how...
The main thing I noticed is the "device unlocked" on today screen...
My usband has a Mio A210 that has WM5 and has the same Today item, "device unlocked". My question is why the Wtek version of Rom doesn't have uit? New version of WM5? Old one? Just different?
Txs,
Deiota
Click to expand...
Click to collapse
Deiota!
For your first question: YES IT IS A RIGHT ROM FOR YOUR DEVICE. JUST COME FROM ANOTHER SERVICE PROVIDERS. DON'T BE AFRAID YOU WON'T HAVE ANY PROBLEM WITH IT!
For second: yes, it might be that your husband has a different version of wm5. It is something like there are many types of laptops, and there are many types of windows, and you can choose which windows you install on which laptop, but you cannot install windows on a macintosh (apple) hardware or a TabletPC, which is something similar than a normal laptop, but with a few specialities. Qtek9000/O2Exec/i-mate Jasjar... has the same hadrware like a Dell/Toshiba/HP laptops with totally the same hardware inside (same RAM size, same videocard type and capacity, same harddisk...)
So, do it.
I wouldn't injure you not for the soul of me, but if after these tutorial you don't understand the procedure, you should ask somebody to do it before you make an irreversible error during upgrading!!!! IT IS DANGEROUS,YOU CAN MAKE YOUR DEVICE TOTALLY UNUSEABLE!
Hi there! I installed thouchflo alpha on Sleuths latest rom...It does showup but I can't turn it with the fingers or the stylus...Everytime I start it it shows a different face but still I can't turn it. Programs start normally if I push any of them. I have HTC home installed ( version with 4 buttons an the bottom ).
Any help would be appreciated!
Thank you!
In other breaking news, germany invades poland.
The answer to your question can be found here:
http://forum.xda-developers.com/search.php?f=355
did you read ??
*hint* do a search for "it doesn't work"
As a relative Newbie to PDA customisation - in a number of Threads deatling cooked ROMs a number are offered with or without "Cube".
What is "Cube" and whatis the difference between ROM's with and without "Cube"?
btw - I recently down loaded the O2 Premium v2 w/o cube for my Orbit, no issues installing and working well, one or two minor issues, but easily overcome with a tweak of settings
Best way is to show it! See the cube?
http://www.youtube.com/watch?v=4HNP1lgbR98
hi all,
can someone please explain how you get the 'cube' to work?
I am running ARTEMIS TOUCH 3.01 WWE - FULL WITH CUBE and everything works OK except I cant see the cube even tho i have it enabled in the TouchFLO applet under system settings.
Thanks and excuse my ignorance... i'm kinda new at this updating ROM's stuff.
-Axel
Problem solved thanks. Found a pictorial explanation on one of tom_codon's posts... thanks tom.
-Axel
I’ve been looking through this forum for two days now and still can’t find a definitive answer to this question…
Is there any way you can modify the ‘Cube’ touchflow application so that it is a ‘proper’ cube with 4 sides ( i didn’t know you could have a cube with only 5 surfaces!! but i digress ) and add shortcuts on the new 'forth' side to launch your chosen applications?
Please can someone give a definitive answer thanks
can you point me in the direction of getting the cube to work - I'm where you were.....searched for tom's post can't locate it???
Axel2k5 said:
I’ve been looking through this forum for two days now and still can’t find a definitive answer to this question…
Is there any way you can modify the ‘Cube’ touchflow application so that it is a ‘proper’ cube with 4 sides ( i didn’t know you could have a cube with only 5 surfaces!! but i digress ) and add shortcuts on the new 'forth' side to launch your chosen applications?
Please can someone give a definitive answer thanks
Click to expand...
Click to collapse
A 'Proper Cube' has 6 sides
Im a new too and cant seem to get the cube thing working...its probably really obvious. Anyone know what the button name is for the cube so I can assign it?
blackcat2000 said:
Im a new too and cant seem to get the cube thing working...its probably really obvious. Anyone know what the button name is for the cube so I can assign it?
Click to expand...
Click to collapse
i havent been able to get it working wither...
mugglesquop said:
i havent been able to get it working wither...
Click to expand...
Click to collapse
On my XDA simple press and hold windowslogo button and works the cube.
xanadu said:
On my XDA simple press and hold windowslogo button and works the cube.
Click to expand...
Click to collapse
doesnt do anything on my MDACIII
http://www.youtube.com/watch?v=4HNP1lgbR98
finesse said:
http://www.youtube.com/watch?v=4HNP1lgbR98
Click to expand...
Click to collapse
cool cool. i'll have to watch it later, youtube is filtered at work
mugglesquop said:
doesnt do anything on my MDACIII
Click to expand...
Click to collapse
Did you read my signature about ROM?
xanadu said:
Did you read my signature about ROM?
Click to expand...
Click to collapse
nope lol
mugglesquop said:
nope lol
Click to expand...
Click to collapse
in this rom cube is included and assigned to "windowslogo" button
ah rite... how do u assign it? i cant find anything related to the program once its installed... nothing in /Windows/Startup, and nothing in Programs..
mugglesquop said:
ah rite... how do u assign it? i cant find anything related to the program once its installed... nothing in /Windows/Startup, and nothing in Programs..
Click to expand...
Click to collapse
Cube assigned in this rom out of box to "windowslogo" button.
"Hbutton 2.1 [UPDATED] Startmenu button, ok\close button and camera mapped to hbutton in full version
Startmenu button
1st press = start menu
1st vibrate (hold button down) = mouse
2nd vibrate = cube"
from topik: http://forum.xda-developers.com/showthread.php?t=344170
xanadu said:
Cube assigned in this rom out of box to "windowslogo" button.
"Hbutton 2.1 [UPDATED] Startmenu button, ok\close button and camera mapped to hbutton in full version
Startmenu button
1st press = start menu
1st vibrate (hold button down) = mouse
2nd vibrate = cube"
from topik: http://forum.xda-developers.com/showthread.php?t=344170
Click to expand...
Click to collapse
ok thanks having a look now
Yea but.... I can't youtube here in Turkey.... using on O2 XDA Orbit ... tell me more about the Cube please
Is there an alternative for that, i think, ugly password screen at the start?
Thanks for your reply.
(HTC Hermes, WM6)
I second this question.
(HTC Kaiser, WM6)
OmegaOne seemed to have the right idea:
http://www.omegaone.com/pass/default.htm
But gave up development of it.
ruffage said:
OmegaOne seemed to have the right idea:
http://www.omegaone.com/pass/default.htm
But gave up development of it.
Click to expand...
Click to collapse
Anyone else develop such?
What about one that displays an image, and you click on a specific area to unlock?
Who could guys change the SetModelID.exe to make the installtion go through the HD for blackberry app suite?
there is one here for HD2
forum.xda-developers.com/showthread.php?t=632147
and here for pro2
forum.xda-developers.com/showthread.php?t=593162
i would be very thankful for who could do this.
Mesho.112 said:
Who could guys change the SetModelID.exe to make the installtion go through the HD for blackberry app suite?
there is one here for HD2
forum.xda-developers.com/showthread.php?t=593162
and here for pro2
forum.xda-developers.com/showthread.php?t=593162
i would be very thankful for who could do this.
Click to expand...
Click to collapse
i HAVE BEEN LOOKING FOR THIS FOR QUITE SOMETIME, LET'S HOPE SOMEONE COULD SOLVE THIS ISSUE.
imtiyazee said:
i HAVE BEEN LOOKING FOR THIS FOR QUITE SOMETIME, LET'S HOPE SOMEONE COULD SOLVE THIS ISSUE.
Click to expand...
Click to collapse
we'll imtiyazee & see if could someone offer help.
both links are the same, which one is the correct one for the HD2?
i don't get it what does this do?
Tha said:
both links are the same, which one is the correct one for the HD2?
Click to expand...
Click to collapse
i'm sorry this link for HD2
forum.xda-developers.com/showthread.php?t=632147
slaming said:
i don't get it what does this do?
Click to expand...
Click to collapse
google it use ' blackberry service'
Mesho.112 said:
Who could guys change the SetModelID.exe to make the installtion go through the HD for blackberry app suite?
there is one here for HD2
forum.xda-developers.com/showthread.php?t=632147
and here for pro2
forum.xda-developers.com/showthread.php?t=593162
i would be very thankful for who could do this.
Click to expand...
Click to collapse
DONE! . It's attached.
Installation goes without any problems (just needed to uninstall bb connect software). BB Application Suite starts but after splash screen I got only white screen and then program probably terminates itself (or wm does it) as I see only today screen (TouchFLO is switched off while BB Application Suite starts).
I have Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010 flashed on my Touch HD and registry tweek - AKU changed to .1.6.0). maybe the WM build could be a problem.
Please share your experience with BB Application Suite on BlackStone I realy am keen on the bb service.
nnnpga said:
DONE! . It's attached.
Installation goes without any problems (just needed to uninstall bb connect software). BB Application Suite starts but after splash screen I got only white screen and then program probably terminates itself (or wm does it) as I see only today screen (TouchFLO is switched off while BB Application Suite starts).
I have Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010 flashed on my Touch HD and registry tweek - AKU changed to .1.6.0). maybe the WM build could be a problem.
Please share your experience with BB Application Suite on BlackStone I realy am keen on the bb service.
Click to expand...
Click to collapse
I'm sorry nnnpga but the file is empty, would you plz reupload it...
Mesho.112 said:
I'm sorry nnnpga but the file is empty, would you plz reupload it...
Click to expand...
Click to collapse
Sorry my mistake. Watching Vacouver ...
Now archive with the file
nnnpga said:
Sorry my mistake. Watching Vacouver ...
Now archive with the file
Click to expand...
Click to collapse
Allright, it worked in my phone "XTROM_GRIDEVO_20B" but it need registertion with either BIS or BES .. ill try and feed you back ..
Thanks nnnpga...
Working but no soft keyboard
After hard reset and installation BAS started to work on Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010.
I have got a PIN (the same as at the BB connect) however was not able even to try enterprise activation as the soft keyboard was not available anywhere there. Or my phone is still not bugs free or it had meant to be this way as Touch Pro (Raphael) has hardware keyboard.
Anyhow I was to flash it to something else tomorrow so I will give it another try.
nnnpga said:
After hard reset and installation BAS started to work on Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010.
I have got a PIN (the same as at the BB connect) however was not able even to try enterprise activation as the soft keyboard was not available anywhere there. Or my phone is still not bugs free or it had meant to be this way as Touch Pro (Raphael) has hardware keyboard.
Anyhow I was to flash it to something else tomorrow so I will give it another try.
Click to expand...
Click to collapse
There is keyboard there but I'm not ganna tell you how to get it caz I'm sure you don't want to see it lool, it the worst keyboard ever, BIS must be joking with us. anayway long press until you see the keyboard in leftbottom.
I got my pin too with BIS service but still stock with enterprise activation. I was thinking to get BES but after I saw the keyboard I changed my mind or If someone haked the app to change the keyboard.
sorry
sorry to sound like an idiot but, ive downloaded the file that was attached...how do i install the appliciation suite?
could this be done for hd mini
Where is the dot "." in soft keyboard?
Thanks for your advices.
Managed to get up to the point of actibation, soft keyboard appeared by long press for each character.
To enter my email I need a dot "." for my email-name and the ".com" ending. There is a character that appears like this, but sits on the middle between characters not on the ground. Any ideas?
Thnx
G.
Hi all,
Ive read all the posts from over 50 sites (XDA and others) and can still not get the BAS to work on my HTC HD2 Leo.
Ive got it to install, Both BBC and BAS.
I have a BES account with my company.
I can get to the Register screen and nothing happens, says message sent but i can go no further.
Ive tried the hack for Raphael, done all the other reg tweeks.
Can someone please provide a simple answer for geting BAS to run, Register, do enterprise activation, sync with my company email, allow internet use etc.
I hate the blackberry they use, dont know why they use it.
I would very much love for someone to provide a solution, i only have 1 week left on my valid activation code. I need my HD2.
Please, please help.
ive spent countless hours and i am actually loosing sleep over the issue.
Thanks
Thanks for the software