Hey guys and gals,
I searched the forums and didn't find this exact topic, so I hope that I am not copying an existing post....
I have the Tilt, and am trying to use either the Kaiser_RUU or hte KaiserCustomRUU, but seem to be having difficulties with both. I am trying to flash to Dutty's WM6.1 Hybrid v2 ROM, but everytime I try, something happens and the connection is lost. Then, the window pops up to restore back to the original ROM.
I am following the directions, and after it goes to the 4-color "USB" mode, it changes to the flash status screen, but never gets past 0%. Then a message pops up that there was an connection error...
this sound familiar to anybody?
Thanks a ton!
Related
Hi guys, i'm sure you wil know what the problems are with this.
Trying to install a ROM upgrade and every time i try just as the update starts the trion disconnects from the pc and the upgrade fails. No idea whats causing this.
If you can help would be great.
Thanks
When starting the rom upgrade also 'verifying information on pc' it puts the trion into a mode where you have red,green,blue and white sections, and says USB at the bottom :S
which rom are you trying to upgrade to?
So far that sounds like normal behavior.
Are you waiting to a minute to see what happens. The updater kills the ActiveSync connection, this is normal.
You may want to check out the wiki and do some reading. Also, as the previosus poster says, a little more info may be good.
Your OS
ROM you're on
ROM your trying to go to
SIM & CID status (locked/unlocked)
Thanks.
I got a X01HT and it has been flashed to WM6 by the seller. However, I have some issues with it.
1) everytime I soft reboot it, it will stuck at the green windows mobile interface and not going thru into my 'desktop'...but I can tell that the phone has ready since the GSM signal flashes. but the screen freezes up at the green greeting page...I have to stab the reset hole for more than 15 times and it can finally get into my desktop... pls help me with the boot up issues...it is quite annoying
2) last time my X01HT looks as usual, but the phone function lost without any clue...no calls in and out but all functions are working well. I sware the flight mode is shut off...how this happened ?
3) I can access to the wifi connection in my office and remote control my computer...BUT, I cannot browse any of the web pages on the device thru the IE or other browsers...any suggestions ?
Thank you so much for your help. New to this device.
no one could kindly lend me a hand ?
What error do you get when trying to load a web page in IE?
no error msg...it keeps searching...searching and searching...
maybe you have an old buggy version of wm6 on your device. try to flash a new release and see what happens. if you still have the problems, it may be a hardware problem.
Hi everyone
I have used the fanstatic guides & software on this forum to update my Orange SPV M3100 to WM6 successfully (for the second time - had to return my first M3100 due to white screen of death).
However, this time, despite trying every Orange settings CAB I can find, I can't send Text Messages ("Your text message cannot be sent") and my voicemail light is stuck on (even though I have no voicemails) (I have tried the Voicemail fix CAB on the wiki without success).
If anyone can help I'd be really grateful
Goto the link and download the cab to your phone, execute it and soft reset the device, see if it fixes the problem.
http://www.4winmobile.com/forums/hermes-black-rom-support/11624-orange-uk-rabdo-v1-6-cab.html
Thanks Starfury. I tried what you suggested, but to no avail. Messages sit in the outbox for a minute or so, then I get the Cannot Send message. Voicemail indicator stuck on too. Have tried hard reset. Not sure what to do next
This always works for me on OrangeUk M3100 with any version of WM6 mate.
Hope it does same for you. Would've thought it will.
Thanks chunkymonkey. I've already tried that one, but I gave it another go....no effect.
I think there is a deeper problem here...
I can see what you are saying regarding the CAB files fixing the problem however I had this problem with my first ever WM6 flash as I only upgraded the ROM not the Radio and was using a really early radio version.
My messages would not send and also when I fixed this my voicemails would get 'stuck' and the voicemail light was always on.
Which ROM are you using? which Radio version etc?
Personally I fixed mine by flashing to black magik and uprading to radio 1.48
Thanks Raven. I'm not sure how to tell to be honest.
I unlocked the phone using "HTC Hermes SIM & CID Unlock - v3a"
Then flashed "HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108"
How can I update my Radio? Can you point me in the direction of the right file?
Thanks loads
Hi mate,
Try this, this is a guide to upgrading to radio 1.43, the principle is the same though for all radio versions. Ensure you have HardSPL installed etc.etc.
(read all the guides lol!)
You should be able to find newer radio version on this forum, I use 1.50 at the moment on Orange UK and works a treat
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=61&Itemid=27
Hope this helps
Thanks for the tips Raven. I have successfully flashed to Radio version 1.5 - but there's no change to the problem at all.
I've totally run out of ideas on this one, gonna throw the damn thing out the window its so frustrating!
All I can suggest is flash to another 'cooked' rom.
I'm using black X (RC) at the moment, super fast and just enough apps to keep me going. Having no trouble at all with this rom and radio 1.50.
hi after days of reading i cant seem to find a fix for my 8525.
it has no gsm message, no radio version,no protocol version.or IMEI.
i have tried to flash serveral different radios and wm6 upgrade, but nothing seems to work. i always get some kind of error or update stops at 11 or 12 %.
not sure what to do next. any help would be very appreciated.
rom 1.34.502.1
no radio
no IMEI
IPL-1.01
spl-1.40.01ipro
thanks in advance
partsman said:
hi after days of reading i cant seem to find a fix for my 8525.
it has no gsm message, no radio version,no protocol version.or IMEI.
i have tried to flash serveral different radios and wm6 upgrade, but nothing seems to work. i always get some kind of error or update stops at 11 or 12 %.
not sure what to do next. any help would be very appreciated.
rom 1.34.502.1
no radio
no IMEI
IPL-1.01
spl-1.40.01ipro
thanks in advance
Click to expand...
Click to collapse
Welcome
Please READ the Wiki
11-12%
im having the same problem that you are having. i have an htc 6800 and id like some help on what i might be screwing up on. this is my first flash and im not quite how to fix it. it seems like some one might know whats happening to us.
this is my first flash. and this is what i know. i know i have bl 1.20 and which was successfully installed.... then i tried to install a rom. alltel as it was required to flash the phone to cricket. that didn't work so well. about 11-12% my comp made a thinking noise like it was starting to load something then my 6800 flashed red and went back to the red green blue screen... so ive been at it all day and found lots of useful info on the internet learning lots about this phone and flashing procedures. found a place online where it instructed me to "force feed the rom" mind you this wasn't something that would fix my problem just a different way to install the rom. so i used a blank RUU and that for the moment looked like it would work. it to had a communication error but it got to 59% the error code was 260. it asked me to unplug everything and plug everything. i have been at this a while i have tried many configurations and different computers and different usb ports. i don't even have a full drasp on this yet. some one tell me how to fix this or what i did wrong. im interested in somthing i read about that i cant find now about loading the rom by resting the phone and the rom installing from the sd card???? can i do this if my usb is acting up?
Hi - while trying to install Skype, the entire OS simply crashed. The phone does switches on but no longer finds the OS. Hence, I have no way to get an ActiveSync connection. Is there any way to install a clean O/S onto it?
Thanks in advance,
First step take your time to read the sticky located at the top of forum..
You could try an hard-reset and if all else fails flash stock ROM via bootloader, then update to ROM of choice.
Error 300
Thanks. I did. Particularly the "unbricking instructions post" from ookba.
The issue is that my Dash does not even start up. Hence, there is no way for me to get an active sync connection.
Current Status:
- phone can be started by pressing the Camera key and Power, which shows the red-green-blue screen
- phone can then be connected to the PC via a USB connection. I hear the ba-bing, but the phone does/will not establish an Active Sync (which makes sense)
- downloaded the TMO official ROM from the TMO site which is a WM6. Now, I know my phone did not previously have WM6. It probably had WM5.x but I cannot find the SHIPPED ROM anywhere.
- when I tried the RRU from TMO WM6 ROM, I got through all the way to upgrading. At which point, the mobile screen went to a white/grey with status bar stuck at 0%. But the PC application crashed and gave an error 300.
repeated the same with Kavana's ROM and the same issue.
I am looking through the forums for error 300 but most solutions seems to require an Active Sync connection. Any other suggestions?
Thanks.
have you tried hard reset? thats your best option
like stylez said, find the stock rom that was already on your phone and flash that.
i know you said you cant find it but it'll be online somewhere
look here
http://forum.xda-developers.com/showthread.php?t=381726&highlight=official+roms
The key here is that you find your original stock rom, I had the same issue a while ago and took some time to get my stock rom in the web, since the forum didn't have it. I found it in the rapidshare library http://rapidlibrary.com/index.php?q=rapidshare+library, searching under HTC s621 rom. Additionally, have u try method # 3 in the unbricking tutorial? It worked for me.