Related
I have a completely dead O2 Xda Zinc..probably caused by software...can someone tell me how to get to bootloader mode so I can try to update rom?..thanks
you need to have the abi files update for your O2 zinc that need only to load to your mini SD. and after power on it will automatic detect by your zinc
windelas said:
you need to have the abi files update for your O2 zinc that need only to load to your mini SD. and after power on it will automatic detect by your zinc
Click to expand...
Click to collapse
i have a similar problem with a dead O2 XDA Zinc...where do i get the abi file or can i make one from the wm6 upgrade file (Xda_Zinc_RM3070712_WWE_ExtV2.8.0.exe) that i download from the official website
the abi file can be found inside the exe but i dunno how can u extract it since if u use any extractor it will not give u the abi file ... also if u hv the raw rom & want to extract the rom also u will hv difficulty in extracting it
that is the problem that i am facing now
you can extract abi file from Xda_Zinc_RM3070712_WWE_ExtV2.8.0.exe by
1. connect o2 zinc with usb
2. flash your o2 zinc by exe file
3. when complete flash don't push finish button
4. select to view hidden files in folder that you put exe file
5. finally you will see marsii_g4.abi
goodluck & sorry my bad english
the .abi file in rapidshare
http://rapidshare.com/files/91371327/MarsII_G4.rar.html
unable to open registry key
hi kindly help me with my xd zinc problem w/ rom6. My unit suddenly crashed while in standby mode then i reset it then the setup was changed. the programs i installed suddenly became resident applications. Meaning ithey don't appear anymore in the storage memory unlike before that i can easily uninstall them. Now i dont know how to install them to install new softwares because the memory is low. then a message error "unable to open the registry key" appears everytime i reset.
What happened and what should i do?
ronald_di said:
hi kindly help me with my xd zinc problem w/ rom6. My unit suddenly crashed while in standby mode then i reset it then the setup was changed. the programs i installed suddenly became resident applications. Meaning ithey don't appear anymore in the storage memory unlike before that i can easily uninstall them. Now i dont know how to install them to install new softwares because the memory is low. then a message error "unable to open the registry key" appears everytime i reset.
What happened and what should i do?
Click to expand...
Click to collapse
reset meaning soft or hard reset?
hard reset or soft reset both does not do any good to remove the error message "unble to open the registry key" and to just reload the orginal applications and remove the others
ehmmm ... sad to say maybe u hv to flash the rom
how do i flash the rom?
download the official rom from seeo2 and then make sure ur dev is fully charged ... sync it wz ur pc using active sync then execute the rom (.exe file u hv downloaded)
good luck
Hi guys,
I've already upgraded to WM6 for my Zinc, but I'd like to have an original ROM in case I need to flash back when something's wrong. I checked seeo2 but I can't find it.
Pls tell me where I can find this original ROM (WWE) ???
Thanks
LeoDH said:
Hi guys,
I've already upgraded to WM6 for my Zinc, but I'd like to have an original ROM in case I need to flash back when something's wrong. I checked seeo2 but I can't find it.
Pls tell me where I can find this original ROM (WWE) ???
Thanks
Click to expand...
Click to collapse
original rom? WM5 ... u can get it at the site also
cruzzmz said:
original rom? WM5 ... u can get it at the site also
Click to expand...
Click to collapse
You mean the WM5 ROM on seeo2? It's still an upgrade ROM, not the original that comes along with the device at the beginning.
Anyway, I'm a newbie so please advice how to 'downgrade' from WM6 to WM5? Is this similar to the process upgrading from WM5 to WM6 (you just sync the device with PC, run the .exe file on the PC and let it go)?
If it's not, please kindly give me detail instruction
Many thanks
Another Rom for Artemis italian user.
This is a new way of install ROM and can be installed ONLY if you have a Micro SD with almost 30 Mb free space.
In Rar archivie there is the nbh file (the Rom) and a file called "Setup".
1. Copy file "Setup" in your SD
2. Flash the rom (remember you must have SPL unlocked).
Don't delete Setup from SD: it's impostant if you make Hard Reset.
Core wm: CE 5.2.1620 (Build 18124.0.4.2) from original HTC WM6 Professional Ita
SplashScreen
SHDC e GPS Photo ready
.........and more.
Italian user can read more on this forums: A1Ktyle - SoloArte
LINK DOWNLOAD RAPIDSHARE
Thanks mate, testing your great work, bye
P3300
My HTC3300 was dead, only can load into Three-color Mode with USB avaliable. I tried all kind of RUUs, including the Original ROMs(English, French, Deustch....)and the newest version , all report ERROR[300]invalid update tool. then the screen of phone stayed in 0% and RUU tool exit only...
IPL 1.27.0001
SPL 1.11.0000 (used the USPL to unlock CID before)
Before Bricked, I successfully updated many versions of ROM, and the last operation is WM6.1.
I'have try this with MTTY:
Cmd> set 32
Cmd> password BsaD5SeoA
Cmd> ruurun 0
Cmd> ResetDevice
But Doesn't work!
because of you!
My phone was perfect before and I have installed your BigiX.
What I have to do? Can U help me?
I can donete some money... pls... help me....
My dear friend,this is an old rom.
But this is not the reason of your problem.
I don't know if MTTY works on this device, but if your screen show 3 colors you are in bootloader mode (and your SPL is 1.11.0000 as you tell, so it is good for flash any rom).
So (in teory) you can connect PPC to PC via USB and run RUU for flashing the rom you want.
In alternative you can flash original rom.
For this operation i suggest Win XP+ AS 4.5 and try to change usb cable (a new one) and usb port (another on your PC)
I hope you can resolve.
No need donate money
Thx, but are 3 days that I'm looking for solution... Lot of people have the same problem. When run RUU flashing after 3 colors bar, the phone start to flashing but is stopping at 0% and the software report ERROR[300]invalid update tool.
I can connect only with MTTY but I'm looking fore some command that can force to send RUU at the fone. For example "send" in telnet. But nobody know how to do this...
If someone have an idea, lot of people will be very very very happy!
And hope gratful
You can try with rom flash from SD card...
Are you italian??
You can found all the info in this website -> Clic here!!!
Yes, I'm Italian.
I'll post this question to that site.
But I think that is possible to force installation of RUU with MTTY.
My problem is that when I have used start_uspl.exe at blank screen was blocked and I have removed battery.
After this my phone is blocked with 3 colors bar and when I try to update, it start but only at 0%
I need to know all MTTY commands
I don't know if MTTY work with P3300, try with the flash from the SD card directly from the device...
This is the link of the discussion...... Click here!!!
Try don't cost anything....
obviously I have try a lot of times... But doesn't work!
I have try to rename in ARTEIMG.nbh and in a lot of different name but when I powe the phone it say Checking SD contents but nothing happen....
I would like to find a command to force reading of SD and writing to the Phone... but I think is not easy...
Thanks whatever....
Do you try with another SD card?
This procedure is the same that the HTC Service use for repair the HTC device...
Try with another SD card... I have a Kingston 2Gbyte and it work very fine!
I hope your Artemis revive very soon!
I have only 2 SanDisk SD cards. One of 128Mb and one of 2GB.
I have tryed with both. With Fat16 and Fat32 but nothing happen...
Sorry for your problems Pinco, I don't have a solution for that but i can strongly recommend another ROM from the great BigX, the one you can see in my signature. OS core seems to be more recent and ROM's almost perfect If you don't have any specific need to use the 2.0, go for Blue-X!
help error 300
what happend any there have solution for this prob
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
I also have a 4GB SDHC card and I have tried with and without it and I still have the same issue.
Cheers,
theorthodontist said:
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
Cheers,
Click to expand...
Click to collapse
Hi m8
i hate the same probleme 1 week looking for a solution
Artemis Touch 4.02 Full with 4 sided cube <--- i have this rom right know.... there are 2 files on it on file
STEP 1 - activesync then uspl cid unlocking
whene its finisch
STEP 2 - activesync then flash artemis touch rom
it works for me
let me know if it work for you
one thing when you have done step 1 you doesn't have take this rom you can take every rom you like
Hi Dookus,
I did actually try the USPL first and when it finishes the activesync green icon goes inactive and my phones screen is blank, so I do soft reset then when the activesync is green I do try to flash the new rom, but that's when it keeps on giving me error.
Could you give me the links to your USPL and Rom please
Thanks again,
hmmm
http://www.4shared.com/file/45478590...ified=c2945a00
this is the 1 i use you may remove you mem card
alternatively flash via sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
p.s. i only flash that way, better even reflash a new rom twice! - i even do so with radio rom!
greetz
thormdac said:
alternatively flash via sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
p.s. i only flash that way, better even reflash a new rom twice! - i even do so with radio rom!
greetz
Click to expand...
Click to collapse
I checked that one out, but it's saying at the bottom that SDHC cards are not supported and this is what I have actually, I even tried the whole process after removing the SDHC card from my phone, but I still got the same error (270) corrupt image file
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
thormdac said:
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
Click to expand...
Click to collapse
I have another computer and it's Vista, I hope it'll work with it, I'll let you know
Thanks
thormdac said:
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
Click to expand...
Click to collapse
SAME PROBLEM, I tried it on the other computer and it gave me exactly the same error
theorthodontist said:
Hi Dookus,
I did actually try the USPL first and when it finishes the activesync green icon goes inactive and my phones screen is blank, so I do soft reset then when the activesync is green I do try to flash the new rom, but that's when it keeps on giving me error.
Could you give me the links to your USPL and Rom please
Thanks again,
Click to expand...
Click to collapse
When your screen went blank, was that after the DOS screen finished? If so, USPL is not finished yet. RUU should automatically start and you flash the USPL (don't need activesync connected here but don't remove USB cable). Then your phone should automatically restart. Once restarted, activesync will re-establish and now you flash the new ROM.
yvrRome said:
When your screen went blank, was that after the DOS screen finished? If so, USPL is not finished yet. RUU should automatically start and you flash the USPL (don't need activesync connected here but don't remove USB cable). Then your phone should automatically restart. Once restarted, activesync will re-establish and now you flash the new ROM.
Click to expand...
Click to collapse
Yes the screen goes blank while the USPL is working then after it reaches 100% the RUU kicks in but my screen is still blank and the activesync is grey and when I continue with it it tells that there's a connection problem.
I really appreciate your help but still can't seem to figure it out, does having a, SFHC has any effect on that ??
theorthodontist said:
Yes the screen goes blank while the USPL is working then after it reaches 100% the RUU kicks in but my screen is still blank and the activesync is grey and when I continue with it it tells that there's a connection problem.
I really appreciate your help but still can't seem to figure it out, does having a, SFHC has any effect on that ??
Click to expand...
Click to collapse
Yes, you should remove your SDHC card when updating. Start again with USPL but make sure your card has been removed. When RUU kicks in after DOS window shows 100%, my screen is blank too with Activesync disconnected, just continue with RUU to flash the new USPL.
After it reboots, run the RUU for the new WM6.1 ROM.
There's pdf instructions in the USPL thread if you're still having problems.
theorthodontist said:
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
I also have a 4GB SDHC card and I have tried with and without it and I still have the same issue.
Cheers,
Click to expand...
Click to collapse
CID Unlock is the first to do....
And NO SDHC card in during flashing....
TPA said:
CID Unlock is the first to do....
And NO SDHC card in during flashing....
Click to expand...
Click to collapse
Thanks guys, I managed to flash ROMs on my Artemis, thank you for your help,
Salut
As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).
The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .
You can download my ROMs, they come with the full package
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?
Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP
Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.
strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?
Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.
From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )
Lol I can't belive I forgot to tell you that!
It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?
Thank you, here you go!
sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!
nevermind, it worked ok on the second attempt!
Hi All,
I did some search, but it seems there's no Error 270 topic for a Touch Diamond. And surprisingly that's the problem I have. Here's the deal.
For a whole duration of the day I've been trying to upgrade to 2.03 ROM, which would my first ROM upgrade. I tried the ROM from the phone's importer site, the HTC site, xda site, all lof them with the same result. After the RRU reaches 100% the mobile goes to Tricolor with "Upgrade ROM code error" message and the RRU shows says Error 270.
I searched the forum and saw that some of the people suggested to burn different HardSPL versions, so I tried burning the 2.03 with various HardSPL versions, 1.24, 1.30, 1.93 are the few I remember, there were more, both signed and unsigned, the last is SPL-1.93.OliNex unsigned -> all of them installed nicely, with a clean reset after them but the following upgrade to 2.03 failed every time the same way, Error 270, as usual.
I use an original USB cable and an XP OS that, at the moment of RUUing, runs nothing but the RUU.
By the way, I also tried doing the upgrade from the internal storage. I renamed the ~100MB file to the name specified in the Noob Guide (DIAMIMG.NBH) and put it at the root of the storage device, but the bootloader gray screen says no image found (or something similar and goes directly to trying to find a USB host).
OK an Update (for whoever gets this problem after me).
I'm not sure why the installation from PC failed time after time - this is something for smarter people to find out.
I solved it by eventually managing to copy one of the numerous RUU_signed.nbh I tried, to the Internal storage, renaming it to the DIAMIMG.NBH and running the bootloader procedure.
Why didn't this work for a 6-10 times I did this before, I donno, the important thing that now it did, and I'm going to enjoy my diamond starting this moment.
Error Code 270
Dear Hunter_I
i have HTC Touch Diamond
i m facing the same problem. and i even dont know how to find the file and how to copy it in HTC internal storage
it is totally un accessible for me
can u help me in this regard
regards
Khurram
Dear Hunter_I
i have HTC Touch Diamond
i m facing the same problem. and i even dont know how to find the file and how to copy it in HTC internal storage
it is totally un accessible for me
can u help me in this regard
regards
Khurram
Hello,
I'll be happy to help to the extent I can.
But can you please specify where you stand right now?
I mean, what steps did you take already and where did you stop?
For example,
Do you have Hard SPL installed already?
What's the ROM you currently have?
Can your phone boot up correctly? Can it sync with your PC?
Is your phone locked?
Let me know some details.