Develop Bugs

What if LVSW_Trinity_WM6_v2.0.0.4 goes wrong during update?

I am using the french version of HTC 3600. I will foloww LVSW procedure for updating but what if it goes wrong !!
Can I simply re-apply the official HTC rom from the HTC web site? WIll that work ?
Thanks for helping
Dag

If you only flash OS, no problem. If you have hard-spl installed your device will be almost unbrickable.

With a new Hard Spl, I can restore an old ROM?

ZakMcRofl said:
If you only flash OS, no problem. If you have hard-spl installed your device will be almost unbrickable.
Click to expand...
Click to collapse
can you explain me what hard-spl is ?

My question here is, will original ROM restore the splashscreen and initial bootscreen that was changed by LVSW?

So many questions
With a new Hard Spl, I can restore an old ROM?
Click to expand...
Click to collapse
You can usually restore an old ROM even without Hard-SPL. It makes it a little easier because you can flash even ROMs that are not intended for your device (for example HTC Rom to Vodafone Compact GPS).
can you explain me what hard-spl is ?
Click to expand...
Click to collapse
Sure. It is a replacement bootloader made by DES and later by Olipro. You'll find it here:
http://forum.xda-developers.com/showthread.php?p=1239088
LVSW offers it as a download as well, I don't know why he didn't include it in the update itself (nbh).
My question here is, will original ROM restore the splashscreen and initial bootscreen that was changed by LVSW?
Click to expand...
Click to collapse
Yes, original ROM updates are what I call full updates: Bootloader, Splashscreens, OS, Radio. However they will only overwrite Olipro's Hard-SPL if you use Soft-SPL (sspl) for flashing. Keep that in mind if you want to send your device in for warranty repairs...
Enough noob questions answered For details use search, its not hard.

OK OK one more thing...
If I flash from mun_rus rom back to WM05 and take device for warranty... thay will not accept it?

If you flash it properly (load SSPL first, then run official update) they will have no way of telling the difference.
Obviously this only works if you have access to the official full update.

grega_slo said:
OK OK one more thing...
If I flash from mun_rus rom back to WM05 and take device for warranty... thay will not accept it?
Click to expand...
Click to collapse
If your phone is the S300+ (SFR version of Trinity) it's gonna be hard. No SFR ROM is available yet. So you can find the OS part over here and you can save your extended ROM, but it seems to be hard to restore exactly as the same.

I`m just asking out of couriosity...
Flashed to muns SE rom works like a charm...

WM6 is coming :)

Fasten seat belts and prepare to catch WM6 for HTC Artemis

Here is Official(not hand made) Artemis WM6 OS dump!!!
Please do not ask me about anything!
I will not comment anything.
http://uploaded.de/?id=5g88lr - ROM ver 1.38
http://uploaded.de/?id=f1zt2f - flasher for SuperCID devices only
http://uploaded.de/?id=2qok1e - Artemis Another WM6 Rom ver 3.5 - not coocked - for SuperCID devices only
All in you hands!
Enjoy!

Well aren't you just a little treasure trove.
Have you looked at this Tupisdin?
Comments on this vs. home made ROMs, any applications installed?
Media Hub etc?

I do not know! I do not have device right now on hand.
I will upload SUPERCID flasher later.

From where did you get hold of this?

Asking questions although he said he would not answer them. Interesting....
I am curious to see the review from the first brave soul willing to try this out. It does seem peculiar that the phone image on the RUU is not the Artemis.

itschase said:
Asking questions although he said he would not answer them. Interesting....
Click to expand...
Click to collapse
Ha, Good point, but I did take that to mean 'don't ask how I got it' more than don't ask any questions.

Gajet said:
Ha, Good point, but I did take that to mean 'don't ask how I got it' more than don't ask any questions.
Click to expand...
Click to collapse
No, that wasn't to you, the guy who blatantly asked...where did you get this.
BTW - I flashed USPL to my phone, tried the RUU version of this update and it said the file is corrupt. I take that to mean the file is not meant for my phone. The first of the two downloads has a file called OS.nb. That must be where I need to focus my attention. I will update if there is anything new....

Am I being super dumb, all I see is one download of a rar file containing os.nb0
What's the RUU version you speak of?
(EDIT) Irrelevant post now original has been updated and post below, although I still not sure what you were looking at, at the time itschase.

Flasher for supercid devices is here.
http://uploaded.de/?id=f1zt2f

The second of the two links contained the RUU...unless the upload site gave me the wrong file....
I am about to try an experimental re-flash...I will post results.

what language is this?

itschase said:
The second of the two links contained the RUU...unless the upload site gave me the wrong file....
I am about to try an experimental re-flash...I will post results.
Click to expand...
Click to collapse
Guess I am the retard, because I tried using the os.nb0 file with several different RUU's and none of them could open the file. I changed the extension to .nb and .nbh just for good measure with no luck.

Works...
tupisdin said:
Here is Official(not hand made) Artemis WM6 OS dump!!!
Please do not ask me about anything!
I will not comment anything.
http://uploaded.de/?id=5g88lr - ROM ver 1.38
http://uploaded.de/?id=f1zt2f - flasher for SuperCID devices only
All in you hands!
Enjoy!
Click to expand...
Click to collapse
Hi all just to let you all know tested this rom and all ok on my sim free (expansys) P3300.
I tried the "PDAVIET_Black&Blue_v3_WWE_Full" first-this was ok but phone would not switch on today, so i was thinking og going back to bepe's wm6 and saw this rom.
I used Artemis_USPL first, then the ROMUpdateUtility.exe supplied in the ARTE_WM6_FLASHER download quoted here (flasher for SuperCID devices only).
My details from device are now as below.
Rom version: 1.38.0.0 WWE
Rom date: 02/15/07
Radio version: 02.93.90
Protocol version: 4.1.13.42
There are not ext rom applications loaded with the ARTE_WM6_FLASHER (2nd link), and not alot installed in wm6, but my memory shows 47.89 free storage and 25.61 free program space.
Keep up the good work XDA....

tupisdin said:
Fasten seat belts and prepare to catch WM6 for HTC Artemis
Click to expand...
Click to collapse
Are we going to have wm6 for the prophrt ?

gadjet said:
Hi all just to let you all know tested this rom and all ok on my sim free (expansys) P3300.
I tried the "PDAVIET_Black&Blue_v3_WWE_Full" first-this was ok but phone would not switch on today, so i was thinking og going back to bepe's wm6 and saw this rom.
I used Artemis_USPL first, then the ROMUpdateUtility.exe supplied in the ARTE_WM6_FLASHER download quoted here (flasher for SuperCID devices only).
My details from device are now as below.
Rom version: 1.38.0.0 WWE
Rom date: 02/15/07
Radio version: 02.93.90
Protocol version: 4.1.13.42
There are not ext rom applications loaded with the ARTE_WM6_FLASHER (2nd link), and not alot installed in wm6, but my memory shows 47.89 free storage and 25.61 free program space.
Keep up the good work XDA....
Click to expand...
Click to collapse
When my p3300 starts the below info is displayed.
IPL 3.04.0001
SPL 1.11.0000
GSM 02.93.90
OS 1.38.0.0
I still have the htc start up wallpaper from the "PDAVIET_Black&Blue_v3_WWE_Full" rom , so will reflash original p3300 rom (ART_HTCWWE_11240501_026790_WWE_Ship), then run above again.
Will let you know outcome, fingers crossed...

Core WM6 with no radio update or EXT Rom applications.
gadjet said:
When my p3300 starts the below info is displayed.
IPL 3.04.0001
SPL 1.11.0000
GSM 02.93.90
OS 1.38.0.0
I still have the htc start up wallpaper from the "PDAVIET_Black&Blue_v3_WWE_Full" rom , so will reflash original p3300 rom (ART_HTCWWE_11240501_026790_WWE_Ship), then run above again.
Will let you know outcome, fingers crossed...
Click to expand...
Click to collapse
Wallpaper back to normal now..
Startup screen now shows:
IPL 1.12.0001
SPL 1.11.0000
GSM 02.67.90
OS 1.38.0.0
Still no ext rom loading or any apps, but wm6 ok free memory same (47.89 storage-26.24 program).

anyone able to post screenshots of the various pages, memory info and device info.
Anyone able to comment on how it compares to bepes rom.

Works now re-modified to include basic rom applications
dannyoneill said:
anyone able to post screenshots of the various pages, memory info and device info.
Anyone able to comment on how it compares to bepes rom.
Click to expand...
Click to collapse
After testing this rom I would advise everyone to use the version ARTE_WM6_3_5, the first release v3 looks like a cut down version of wm6.
The reason its fast is that loads of programs etc removed, no quickgps, no bluetooth explorer etc... also new radio stack is old version to?
Re flashing version 3.5 now which includes the missing apps.

gadjet said:
After testing this rom I would advise everyone steer clear of it, its a shame but looks like a cut down version of wm6.
The reason its fast is that loads of programs etc removed, no quickgps, no bluetooth explorer etc... also new radio stack is old version to?
Re flashing bepe rom now
Click to expand...
Click to collapse
This Rom OS only.Applications in this Rom not new but verry nice OS.May be i will Rebuild OS in v3 B&B in next week...!

Official WM6 & SSPL?

i have UK Orange M700,
i have flashed successfully twice using SSPL with LVSW & mUn 2.00.S.E!
is it possible to flash to official WM6 using SSPL? like i have already done

Was creating a new thread REALLY necessary? When there's at least 2-3 others about this...

darkjedi said:
Was creating a new thread REALLY necessary? When there's at least 2-3 others about this...
Click to expand...
Click to collapse
But the only answers seem to be "flash HardSPL" & official WM5 rom, which i dont have being on Orange M700!
i want to be able to flash using SSPL straight from 1 cooked Rom to another.
p.s. i'll make sure i P.M. you before i start another thread!

goodie said:
is it possible to flash to official WM6 using SSPL?
Click to expand...
Click to collapse
No it isn't, here's the answer:
The "official" WM6 rom NBH file has the OS part tagged as 0x401 (256Mb NAND) instead of 0x400 (128Mb NAND). Only the new SPL-3.03 included in this "official" upgrade is able to understand 0x401, so SSPL, HardSPL or CrashProof SPL or whatever that's not based on this SPL-3.03 (or newer) will not be able to understand the NBH header type 0x401 and will stop at OS flashing.
The solution is simple:
Unpack the NBH and repack it tagging OS as 0x400, then flash it using SSPL, or whatever hacked SPL choice we have.

i've never tried unpacking an NBH or retagging!
is this something the knowledgeable cooks on here will manage easily?

one moment and I'll post a safe and re-tagged file for all.

Shadowmite said:
one moment and I'll post a safe and re-tagged file for all.
Click to expand...
Click to collapse
thanks, i appreciate the offer, but i think i will wait for a cooked Rom with HTC homeplug, audiomanager & no slow down?
apparently the only way to get HTC apps with no slow down is to have them cooked into a rom?

Just CID unlock your phone, it works just fine.

Using SSPL-TRIN.exe or have you got to CID unlock?

With Pof's CID Unlocker. Has worked for me, and my friend.

pof said:
No it isn't, here's the answer:
The "official" WM6 rom NBH file has the OS part tagged as 0x401 (256Mb NAND) instead of 0x400 (128Mb NAND). Only the new SPL-3.03 included in this "official" upgrade is able to understand 0x401, so SSPL, HardSPL or CrashProof SPL or whatever that's not based on this SPL-3.03 (or newer) will not be able to understand the NBH header type 0x401 and will stop at OS flashing.
The solution is simple:
Unpack the NBH and repack it tagging OS as 0x400, then flash it using SSPL, or whatever hacked SPL choice we have.
Click to expand...
Click to collapse
good
my device is dopod 810 eng ver (HK). I flashed it to chinese ver WM5 before using SSPL. For WM6, i have no problem flashing to SEA ver. But always get invalid vendor ID for the Trad. Chinese rom.
I then tried to unpack and pack it again with 128MB size.
and work like a charm
thanks all!!

h0228631 said:
good
my device is dopod 810 eng ver (HK). I flashed it to chinese ver WM5 before using SSPL. For WM6, i have no problem flashing to SEA ver. But always get invalid vendor ID for the Trad. Chinese rom.
I then tried to unpack and pack it again with 128MB size.
and work like a charm
thanks all!!
Click to expand...
Click to collapse
May I know how to repack the file with 128MB size?

generic ROM before flashing new ROM?

Hi, I dont have my Softbanks TyN Hermes 200 base ROM. I reflashed ones to shaps WM6.0.
It is recomended to flash original ROM before reflashing to one of the latest ROMs.... is there a good generic I could use instead of my original ROM? or should I just flash the new ROM directly?
thanks!

Its usually recommended to flash to original ROM when you flash a hyperstorage ROM, ie. OS and ExtROM merged! If not, just flash them and it should be ok.
What i do is strip out just the OS and ExtROM from the orginal one and make a RUU just by themself. I flash this before i flash the ROM i like. That way, i dont mess with radio, IPL, SPL etc.

ai6908 said:
Its usually recommended to flash to original ROM when you flash a hyperstorage ROM, ie. OS and ExtROM merged! If not, just flash them and it should be ok.
What i do is strip out just the OS and ExtROM from the orginal one and make a RUU just by themself. I flash this before i flash the ROM i like. That way, i dont mess with radio, IPL, SPL etc.
Click to expand...
Click to collapse
When I saw this post I thought exactly about this. Can you please post this "stripped" version of the official ROM, I'm growing tired of reflashing Radio every now and then. BTW, I was trying to do this a few days ago and got more confused than anything, so I just quit.
Thanks in advance,

dr_tracker said:
When I saw this post I thought exactly about this. Can you please post this "stripped" version of the official ROM, I'm growing tired of reflashing Radio every now and then. BTW, I was trying to do this a few days ago and got more confused than anything, so I just quit.
Thanks in advance,
Click to expand...
Click to collapse
I dont have a rapidshare or any of the file sharing account and file is about 80MB, so i dont have a good way of uploading the file. Did you try using dutty's tool (can be found in any kitchen) to strip the RUU file and rebuild it again? That's what I did, if that helps.

ai6908 said:
I dont have a rapidshare or any of the file sharing account and file is about 80MB, so i dont have a good way of uploading the file. Did you try using dutty's tool (can be found in any kitchen) to strip the RUU file and rebuild it again? That's what I did, if that helps.
Click to expand...
Click to collapse
Perfect... Just what I needed, thanks a lot...

ai6908 said:
Its usually recommended to flash to original ROM when you flash a hyperstorage ROM, ie. OS and ExtROM merged! If not, just flash them and it should be ok.
Click to expand...
Click to collapse
Excellent, figured it was something like that. Thanks for the tip!

Hello,
I wanted to follow this method, but my original rom (softbank x01ht, wm5), is not available anymore. Can I use another generic rom, and in wm6 version? And using dutty's tool, are the "version" and "language" fieds important, or is it just for the info in the phone (as it will be a transition rom, I really don't care about it, even is it wasn't transition rom by the way)? Sorry for the noob questions, but I'm trying to avoid bricking my phone...
Toni

tonidekohlanta said:
Hello,
I wanted to follow this method, but my original rom (softbank x01ht, wm5), is not available anymore. Can I use another generic rom, and in wm6 version? And using dutty's tool, are the "version" and "language" fieds important, or is it just for the info in the phone (as it will be a transition rom, I really don't care about it, even is it wasn't transition rom by the way)? Sorry for the noob questions, but I'm trying to avoid bricking my phone...
Toni
Click to expand...
Click to collapse
I am not sure about softbank, but if you can install any hermes ROM, then you should be good to go with any official hermes ROM.
I never change the version and language in dutty's tool when i create my own ROM's!

Ok thanks, that's all I needed! I will take the cingular rom as it seems it was the one which gave best results on hard reset issue.
Toni

Windows mobile 6.1 official htc rom, please

Can somebody please download the official orginial HTC ROM 6.1 and upload it here, I tried to download it for my orange SPV M700,before download it, it asked for serial number to download and it won’t let me, please if somebody has HTC P3600 can download it from htc please , I will be very grateful so will be others thanks

Is this the one you are looking for? I notice it's not downloadable any more from the link I used to have.
RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
http://www.mediafire.com/?nim2tnntdzk
You'll find this one along with many others in my signature.

thanks
thank you for posting the link but the installer keeps saying that the file is currupt i have downloaded it 3 times to no success, thank you for trying to help

WM 6.1 or 6.0 ?
i guess the file attached is 6.0 pro..correct me if im wrong

Hello
WM 6.1 official don't exist for Trinity or P3600 or Dopod so don't search , but you have a lot cooked wm 6.1 roms .

chanvi93 said:
Hello
WM 6.1 official don't exist for Trinity or P3600 or Dopod so don't search , but you have a lot cooked wm 6.1 roms .
Click to expand...
Click to collapse
So true. I apologize for the download headache. I'm not sure what happened to the file hosted on MediaFire. It worked a while back when I needed it. I tried to download it yesterday, and I also found it to be corrupt.
Anyways, Chanvi93 is correct, and I missed your asking for 6.1. I just assumed I had read 6.0 Pro since it was the latest, and 6.1 was not made available.
I apologize. If you still want the 6.0 Pro, I will do my best to recover the file for you.

Look over here : http://trinityguides.info/index.php?option=com_content&task=view&id=14&Itemid=66
WM6 Official - Any Device
Thx 2 racerx !!!

But many cooked rom are much better than the official ...

shym said:
But many cooked rom are much better than the official ...
Click to expand...
Click to collapse
Agreed, many are MUCH better.
But it's always good to have the original on hand just in case of a failed flash. The OEM can return your phone to a usable handset again.

doesn't matter any more, i sold it off and bought a hermes instead
___________
My Hermes is my treasure and you can't have it

Hi.
Do anyone know if its releast a Swedish version of this officual rom?? I have upgraded my P3600 but forgot to do a backup on the ols system
Thanks

Jonny Myrberg said:
Hi.
Do anyone know if its releast a Swedish version of this officual rom?? I have upgraded my P3600 but forgot to do a backup on the ols system
Thanks
Click to expand...
Click to collapse
I'm not sure, but you can check here:
http://www.htc.com/europe/selectcountry.aspx
Select your Country, then Click on Support, then Select your Phone, and it will show all the Official Downloads you can get.

SuperSport said:
I'm not sure, but you can check here:
http://www.htc.com/europe/selectcountry.aspx
Select your Country, then Click on Support, then Select your Phone, and it will show all the Official Downloads you can get.
Click to expand...
Click to collapse
Thankyou SuperSport..
Tried to download the 3.00.707.18 from dopodasia, but the website is down..
Managed to download from your mediafire site..
Thanks.. hope more people will be like you..willing to share..
Thanks again and have a nice day..

lengendxd said:
Thankyou SuperSport..
Tried to download the 3.00.707.18 from dopodasia, but the website is down..
Managed to download from your mediafire site..
Thanks.. hope more people will be like you..willing to share..
Thanks again and have a nice day..
Click to expand...
Click to collapse
This was a long time back, but glad to be of help. Good luck with the flash.

SuperSport said:
This was a long time back, but glad to be of help. Good luck with the flash.
Click to expand...
Click to collapse
Just done the flash and installed back all the applications.
Tested the gps, just standing outside my door.
Started at 16.27
Logged on at 16.30
Just 3 minutes.
Used to take 5-8mins.. wow..
My original rom is:
Rom version: 3.00.707.17
Rom date: 06/29/07
Radio version: 1.46.00.11
Protocol version: 32.79.7020.19H
The official rom that I just downloaded from your site:
Rom version: 3.00.707.18
Rom date: 07/24/07
Radio version: 1.46.30.11
Protocol version: 32.79.7020.19H
Thanks once again, SuperSport..

lengendxd said:
Just done the flash and installed back all the applications.
Tested the gps, just standing outside my door.
Started at 16.27
Logged on at 16.30
Just 3 minutes.
Used to take 5-8mins.. wow..
My original rom is:
Rom version: 3.00.707.17
Rom date: 06/29/07
Radio version: 1.46.00.11
Protocol version: 32.79.7020.19H
The official rom that I just downloaded from your site:
Rom version: 3.00.707.18
Rom date: 07/24/07
Radio version: 1.46.30.11
Protocol version: 32.79.7020.19H
Thanks once again, SuperSport..
Click to expand...
Click to collapse
That's all good news! Glad it worked.

Hey Supersport,
What's the performance like on the official 6.0 available in your download files?
Is it worth me flashing and testing or does it come with a headache?
Mattster.

Mattster_spv said:
Hey Supersport,
What's the performance like on the official 6.0 available in your download files?
Is it worth me flashing and testing or does it come with a headache?
Mattster.
Click to expand...
Click to collapse
No headaches that I know of. It is a little heavy with unneeded software, but it's funnly you asked today. I just flashed it last night to clear a bad flash I had done. It was fun to see it running on my phone again.
Keep in mind, it does overwrite your Hard SPL, so you will need to do that again BEFORE flashing another ROM, it overwrites your boot screens, and it does overwrite your radio with 1.46.70.11. I've left that radio on for a while, and I seem to be getting quite fast GSP acquisition. Could be in my mind, but it does somehow seem different. Also, the OS moved quite swiftly compared to the latest ones I've been messing with. It's back to the OLD Home screen, but you will probably install SPBMS anyways.
If you flash it, and need Hard SPL help, I've got a small download that takes the hassle out of it. It's just Olipro 1.20 and SSPL_TRIN.exe in a zip file, but it's easy to use. It's possible that I MIGHT be able to CAB it up for you, but I have not tried that yet.
Good Luck!
Edit: Remember, the download is large, but it does include NEW IPL, SPL, Splash Screen 1 & Splash Screen 2, ExtROM, Radio ROM, and OS. So, the OS itself is really not taking up too much room. I'll post Free Mem and Space in a few minutes. I'm flashing now...
39.89 Space
28.69 Mem

SuperSport said:
Keep in mind, it does overwrite your Hard SPL, so you will need to do that again BEFORE flashing another ROM, it overwrites your boot screens, and it does overwrite your radio with 1.46.70.11.
If you flash it, and need Hard SPL help, I've got a small download that takes the hassle out of it. It's just Olipro 1.20 and SSPL_TRIN.exe in a zip file, but it's easy to use.
Click to expand...
Click to collapse
Hmmm.. sounds like I'll give it a go.
Does it come with an inbuilt Task Manager? (If one has to install a task manager after the flash, it doesn't show up on Spb Shell screen.)
Also, after flashing it, I just execute the Rom Update Utility in your Olipro 1.20 file and that sorts out the Hard SPL for future flashes, yes?
Mattster

Damn, the flash crashed at 5% and the recovery does not work.
My device is stuck on tricolour and will not active sync with my pc, which means I can't flash.
Any ideas?