Develop Bugs

[Q] help : Pb during hard SPL !!!!

Hi
I received my Diamond this evening and i wanted to change the ROMs.
Before i had a Touch elfin.
I try to install the Unsigned-Hard-SPL-Diamond-OliNex but it didn't work:
i have the message:
Error [202] connection (while ActiveSync is green, ....).
My actual SPL is:
DIAM100 64M
SPL-1.37.0000
Microp-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
When i used the Romupdate utility i have a ROM version 1.37.163.4
Any ideas???
I try to found if i need to cid unlock my diamond but i can't found an asnwer with the search function.
Regards

US version of ROM for warranty return

Does anyone have the US version of the ROM that can be flashed for warranty return? I've checked the Wiki and searched here but all I can find is the WWE for Hong Kong 1.93.831.1 52.29.25.12H_1.00.25.05. Is that what I should use? Thanks!!

US Rom
Check out this thread
http://forum.xda-developers.com/showthread.php?t=432496

Thank you so much! I've spent the morning searching through the threads but for some reason I couldn't find it! Thank you!!!

I have to return my diamond to warranty because my touch screen seems to gone crazy. I calibrate the screen 20 times but when I press Start with my stylius my diamond open clock properties.
Anyway a have installed SPL-1.40.OliNex and I want to return to original for warrany return. How cand I do that because when I press volume down and reset in the 4 color screen sho me
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I want SPL-1.40.OlinNex to dissapear

Zaf said:
Anyway a have installed SPL-1.40.OliNex and I want to return to original for warrany return. How cand I do that because when I press volume down and reset in the 4 color screen sho me
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I want SPL-1.40.OlinNex to dissapear
Click to expand...
Click to collapse
Take a look here
http://forum.xda-developers.com/showthread.php?t=400950&page=4
post #39

omaga 10x a lot it works fine. Thank you again. Now my Diamond I's ready for warranty return.

Original WM6.1 ROM for Diamond

HI
Yesterday I buy my diamond.
In bootloader i see:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAFE_PVT v0x30
Click to expand...
Click to collapse
it is ok? and i have cid unlocked?
And From where I might download Original WM6.1 from HTC.

Can I Do that in this: http://www.htc.com/www/SupportViewNews.aspx?dl_id=483&news_id=68
I download this: _HTC Touch Diamond_MRII_RUU_Diamond_HTC_SPA_2.03.412.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship

Search, read, search, read
Hi and welcome
Please try searching and reading before posting yet another post equal to so many others.
Everything is in the forum, just look for it

Abnormal Responce Of Touch Pad - HTC Touch Diamond

Please Please Help me !!!
This is the SPL screen before I start
DIAM100 64M
spl 1.93.01 OliNex
Microp-Diam (led) v11
Psoc-Diam STAGE_PVT v0x30
But mistakenly I flashed RUU_Signed_SPL193stock instead of Hard SPL OliNex137 Unsigned. After restating I Got into an endless screen align loop. By editing registry I got out from it. Although my touch pad is now not selecting the place I touch and finger spanning also not working in normal way.
Again I flashed Unsigned-Hard-SPL-Diamond-OliNex 1.93 but my SPL screen 4th Line is got changed to vx32 and this is the SPL screen after flashing.
DIAM100 64M
spl 1.93.01 OliNex
Microp-Diam (led) v11
Psoc-Diam STAGE_PVT v0x32
1Q. Is something wrong with memory allocations
2Q. How can I revert it to Psoc-Diam STAGE_PVT v0x30.
Thanks in advance ...

salyxda said:
Please Please Help me !!!
This is the SPL screen before I start
DIAM100 64M
spl 1.93.01 OliNex
Microp-Diam (led) v11
Psoc-Diam STAGE_PVT v0x30
But mistakenly I flashed RUU_Signed_SPL193stock instead of Hard SPL OliNex137 Unsigned. After restating I Got into an endless screen align loop. By editing registry I got out from it. Although my touch pad is now not selecting the place I touch and finger spanning also not working in normal way.
Again I flashed Unsigned-Hard-SPL-Diamond-OliNex 1.93 but my SPL screen 4th Line is got changed to vx32 and this is the SPL screen after flashing.
DIAM100 64M
spl 1.93.01 OliNex
Microp-Diam (led) v11
Psoc-Diam STAGE_PVT v0x32
1Q. Is something wrong with memory allocations
2Q. How can I revert it to Psoc-Diam STAGE_PVT v0x30.
Thanks in advance ...
Click to expand...
Click to collapse
Oh God... No help it seems !!!
At least anybody tell me what information giving by this "Psoc-Diam STAGE_PVT v0x30". What says by this.

Try the suggestions in this thread:
http://forum.xda-developers.com/showthread.php?p=2797568
He had the same status as you, but another error code I think.
I can now get it to boot and show the following:
PSOC-Diam STAGE_PVT v0x32
Upgrade Rom code error
Please try again
USB
windows not detects the devide (i think)
Click to expand...
Click to collapse
He finally was able to reflash it in Vista, it didn't work for him in XP or Linux.
Good luck!

Matzen said:
Try the suggestions in this thread:
http://forum.xda-developers.com/showthread.php?p=2797568
He had the same status as you, but another error code I think.
He finally was able to reflash it in Vista, it didn't work for him in XP or Linux.
Good luck!
Click to expand...
Click to collapse
Thanks for your reply Matzen
My problem is I can flash anything & communication with USB perfect. But Touch panel is not selecting the place I touch after the initial flashing.
4th line in the tri color Flash screen got change PSOC-Diam STAGE_PVT v0×30 to PSOC-Diam STAGE_PVT v0×32. I dont know what information is giving by this line. After it got change to vx32 only the touch panel problem arised.
Is anyone out there knows about this PSOC-Diam STAGE_PVT v0×30 ?.
Thanks

[HELP] How do i Flash Again? [HELP]

Hi guys!
I flashed my diamond to söderströms 6.0 using this guide:[TUT]Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!!
Everything worked and now i wanna flash to another ROM how do i do? Shall i do the process again in the guide or what?
Start+Volume Down Button= DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Please Help Thx!

plenty of guides on this site... no need to be lazy, go read

You don't need to flash HardSPL again. Or the radio for that matter, although some people like to test different radios now and then to check which performs better with their current ROM.
You just flash the ROM you want to flash like you flashed soderstroms.