My screen will turn off black light in 10 sec, if i tap anywhere on screen or press any buttons, it will not turn on.
I can only activate it using the power button
.. how can i modify it so that it will become active by any key press?
thanks
settings > system > keylock >
Try "lock buttons if device is locked"
or in settings > system > power > advanced
you can set how quickly the device will turn off.
settings > system > backlight < battery power
for the backlight off time.
You could also pick "Do not lock buttons" in the key lock settings but that means ANY button gets pressed you're backlight is back on and you could be doing ANYTHING...
Unless you have a lock program - like S2U2 - then you might not like the results & be spending BIG $$ on phone calls and browsing you didn't mean to do...
Cheers...
thanks for the replies
one more question, other than the S2U2... are there any programs/software for the hermes that when the black light turns off it can be reactivated if i slide open the phone (or press the power button)
silicuda said:
thanks for the replies
one more question, other than the S2U2... are there any programs/software for the hermes that when the black light turns off it can be reactivated if i slide open the phone (or press the power button)
Click to expand...
Click to collapse
This is a beta program then there is This, which is configed with an XML, tried this one, its good.
There will never be any software that allows actions based on sliding open/closed, unlike with the Kaiser. (something about it not being a software rotation but a hardware one)
veyka said:
This is a beta program then there is This, which is configed with an XML, tried this one, its good.
There will never be any software that allows actions based on sliding open/closed, unlike with the Kaiser. (something about it not being a software rotation but a hardware one)
Click to expand...
Click to collapse
thanks veyka!
PS: i just noticed your benchmark post, helped me decide which rom i installed on my new phone (i just got the phone yesterday, and after a few hours of reading decided on the CRCs V12.10 WM6.1 rom
silicuda said:
thanks veyka!
PS: i just noticed your benchmark post, helped me decide which rom i installed on my new phone (i just got the phone yesterday, and after a few hours of reading decided on the CRCs V12.10 WM6.1 rom
Click to expand...
Click to collapse
Your more than welcome! And thats the aim, to help people chose without flashing everything under the sun like i did (ps good choice )
veyka said:
Your more than welcome! And thats the aim, to help people chose without flashing everything under the sun like i did (ps good choice )
Click to expand...
Click to collapse
i'm happy with it so far, i installed HTC Home so I can have live weather, now playing with favorite people Runs fast as hell, awesome phone.
Thanks again
Related
Guys - the only way I can bring my 8525 out of STANDY is with the power button. My "KeyLock" is set to "Lock buttons if device is locked" but its NOT locked yet, just in standby. The only button that can get it to wake up is a quick-push of the Power-Button.
I remember an app being on Black 2.5 that said you could push ANY button to wake it up OR another option of only the Power Button, but I can't find that on Black 3.01. I think it was under the "Personal" menu list.
I'd like to wake it up with the green-phone button or with ANY button, but that doesn't happen. Am I missing something - how are you waking up yours?
Thanks.
Did you try Settings>System>Key Lock?
Select the "don't lock any buttons"
mitchg said:
Guys - the only way I can bring my 8525 out of STANDY is with the power button. My "KeyLock" is set to "Lock buttons if device is locked" but its NOT locked yet, just in standby. The only button that can get it to wake up is a quick-push of the Power-Button.
I remember an app being on Black 2.5 that said you could push ANY button to wake it up OR another option of only the Power Button, but I can't find that on Black 3.01. I think it was under the "Personal" menu list.
I'd like to wake it up with the green-phone button or with ANY button, but that doesn't happen. Am I missing something - how are you waking up yours?
Thanks.
Click to expand...
Click to collapse
Maybe the button assignments are set to <None>. Check Start>Settings>Buttons
Running Black 3.0, my device can be woken using any button when set to the setting you describe (as per normal behaviour). Sorry, doesn't help much I know, perhaps its a 3.01 thing.
And mine cant. so strange!
Hyperbaric said:
Running Black 3.0, my device can be woken using any button when set to the setting you describe (as per normal behaviour). Sorry, doesn't help much I know, perhaps its a 3.01 thing.
Click to expand...
Click to collapse
Thanks - Yes, I have it set to "lock buttons if device is locked," so I would think that would mean any button could turn it on, if its not locked, but thats NOT the way mine is working. I ALWAYS have to hit the powerbutton to wake it up. I'll keep looking, but I'm sure there was a 2nd small app that had something to do with this, but its just not in 3.01. Thanks again.
dbaser said:
Did you try Settings>System>Key Lock?
Select the "don't lock any buttons"
Click to expand...
Click to collapse
Thank you very much.
The Rom you are using could have this problem.If you can try for anyother ROm. that rom is quite old now.
I've noticed since installing Kavana's 6.1 ROM (great ROM, btw), that I can no longer use my red disconnect button as a shortcut to lock my phone.
In the past, I would just depress the red disconnect button for a few seconds and it would lock the phone, now I can only do this by hitting the left side power button to bring up the quick menu to do this.
Is there a way to get the shortcut back?
Thank you,
Tim
Locking Dash
I have always held down the z key to lock my phone. This works for me in WM6.1
Thank you, never tried that method, the key is smaller than the red disconnect button, but it'll do. - Tim
Strange. It works for me by default and I am using this ROM:
RUU_Excalibur_WM61_Kavana_080320_WWE.exe
(apparently this is the same as the 080318 ROM, but with the defaults that he said were turned off actually turned off).
Strange it's working for me now as well.... but yesterday depressing the key would do nothing. Being a Windows OS I should have known I'd need to reboot. ;-)
False Alarm
- Tim
when in doubt.... Reboot!!!!!!!
Is there an auto key lock function or application available for WM 6.1?
timlee said:
Is there an auto key lock function or application available for WM 6.1?
Click to expand...
Click to collapse
Automatic Keylock
I have upgraded from a Touch Pro and am hugely impressed with it. The only negative I am experiencing is that the power button is a lot easier to press than on the original TP. As such, I want to auto enable the lock automatically when the device is turned on. I have enabled this with HD Tweak, and soft reset, but it's still not working. Anybody got it to work?
Yes, I got the same problem, I used the latest Advance Config, but the setting is not there... any one knows any work around?
bump, can anyone help?
I resorted to using S2U2. Works like a charm!
I'm using Pocket Shield for my locking needs. It can unlock with light sensor, gestures, swipes etc. It's pretty handy when using with light sensor enabled as it unlocks without the need to slide or shake. Other unlock options are handy at night time when light sensor wont work.
Juggeli said:
I'm using Pocket Shield for my locking needs. It can unlock with light sensor, gestures, swipes etc. It's pretty handy when using with light sensor enabled as it unlocks without the need to slide or shake. Other unlock options are handy at night time when light sensor wont work.
Click to expand...
Click to collapse
yeah you but gotta pay for it! S2U2 is FREEEEEEE!!
I'm using smartlock and it works!
another option: can set a password on the phone to lock after 1 min.
Mesquire said:
another option: can set a password on the phone to lock after 1 min.
Click to expand...
Click to collapse
Please tell me, how do I do this?
Start > Settings > All settings
Click the Personal tab, followed by Lock
Set password and length of inactivity
AMoosa said:
I have upgraded from a Touch Pro and am hugely impressed with it. The only negative I am experiencing is that the power button is a lot easier to press than on the original TP. As such, I want to auto enable the lock automatically when the device is turned on. I have enabled this with HD Tweak, and soft reset, but it's still not working. Anybody got it to work?
Click to expand...
Click to collapse
The problem is the power button on the touch Pro2 is very sensitive, (this needs to be fixed) it cuts the phone on too easy. I just insatlled S2U2, it does does work great, just set the activate time to 10 seconds, if the power button is accidently pressed the phone will cut off within 10 seconds, you can also adjust it lower.
I tried the other pwer options in windows mobile 6.1 and they dont work on the touch pro2 with any success., phone kept cutting on, which I would discover after taking the phone out of the case...kept killing the battery.
cdcool said:
The problem is the power button on the touch Pro2 is very sensitive, (this needs to be fixed) it cuts the phone on too easy. I just insatlled S2U2, it does does work great, just set the activate time to 10 seconds, if the power button is accidently pressed the phone will cut off within 10 seconds, you can also adjust it lower.
I tried the other pwer options in windows mobile 6.1 and they dont work on the touch pro2 with any success., phone kept cutting on, which I would discover after taking the phone out of the case...kept killing the battery.
Click to expand...
Click to collapse
I sometimes hit the power button when typing. At first i thought my device was crapping out untill i noticed i was hitting the power button with my left hand index finger.
Mesquire said:
Start > Settings > All settings
Click the Personal tab, followed by Lock
Set password and length of inactivity
Click to expand...
Click to collapse
Thanks, you've helped me out in more ways than one
for all who have a TP2 and are using S2U2, which version are you using? the reason I ask is because I upgraded to v2.02 on my tilt and it went all buggy on me so I uninstalled it. And I'd like to know which version people are using so I can install it when I get the phone.
and also, have you noticed any bugs or undesirable occurrences with S2U2? even if it only happened a couple of times, I'd really like to know.
thanks
Very simple and very very light application.
Does exactly what it says on the TIN.
The reason I compiled this application is purely to avoid using power button as I don’t want it to worn out. To turn the screen on or off we have to use power button which might stop working if we use the button too much. This application will cut the use of the power button by 50% at least
Rather than using the power button to turn the screen on and off, tap on this application to turn the screen off. Very small application V1.0
I might release another one when I get feedback from the users.
If you want just exe file then copy it in to your phonewindows->start menu-> program folder
Or use cab file which will install it on the above location for you
Enjoy !!!!
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
+1
That makes a lot of sense!
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
hiya,
much appreciate for your comments. do you mean turning screen off as well as locking the screen..? so that when you touch the screen it won't come back on...?
I'm working on to prepare better version i.e. it would be on the home screen so that no clicking on start menu and then this app.
cheers
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
I think he means that you program should not only turn off the devise, but also lock it with the standard WM lock at the same time. That would be good for me, at least.
EgorLev said:
I think he means that you program should not only turn off the devise, but also lock it with the standard WM lock at the same time. That would be good for me, at least.
Click to expand...
Click to collapse
+1
screen off + lock at same time only pressing Powerbutton.
It work perfectly for me so as it is. I changed the left soft-key so that it will start "turn off the light.exe" .When the screen is off S2U2 will lock the screen. So I can turn off and lock the screen with only one click.
To change the soft key do this:
with a registry editor go to HKLM/Software/HTC/manila/ . in HomeLSKPath (left softkey) or HomeRSKPath (right softkey) write the address to "turn off the light.exe". HomeLSKText and HomeRSKText are the text for the softkeys.
That´s it!
update for touch diamond
hi everyone,
massive thanks to all those who provided replies. I have tried on my blackstone (Touch HD) and it does seems to turn off the screen plus all keys as well.
I can confirm that it doesnt lock all the keys i.e. doesnt lock the device on touch diamond model. I'll modify the program and upload the newer version with the feature of locking the keys plus turning off the screen.
once agian special thanks to everyone.
Certainly reading the comments above, people seemed to understand what I was getting at. With the screen off, the buttons on a HD will indeed be non-responsive, however if an event (SMS or similar) woke the screen, the device would be in an unlocked state. What I would be interested in is a program that turned off the screen and invoked the standard WM lock program (gwes.exe?).
Hope that makes sense.
i like this application but i think the icon is really ugly..
Hi,
is there a possibility to do a screen unlock application which can be activated by voice commander? the situation is this...
I used voice commander to launch google maps while my hand is busy when the screen is lock. however, i will need a program which can be initiated by the voice commander to unlock the screen so that i can navigate the maps. Right now i will have to unlock the screen the normal way which i find voice commander redundant since i'll have to use my finger during lunching anyway.
Can you help me on this? Many thanks in advance. =)
Major_Sarcasm said:
Certainly reading the comments above, people seemed to understand what I was getting at. With the screen off, the buttons on a HD will indeed be non-responsive, however if an event (SMS or similar) woke the screen, the device would be in an unlocked state. What I would be interested in is a program that turned off the screen and invoked the standard WM lock program (gwes.exe?).
Hope that makes sense.
Click to expand...
Click to collapse
Here is the app that has the feature which you prefer:
LockDevice => http://forum.xda-developers.com/showthread.php?t=542482
Thanks for the link!
Been using this app so i dont have to fumble with the power button to turn the screen off. Seems this app only turns off the screen and doesnt actualy put the phone in sleep. I would like an app like this that acts as the power button does. So when i put the phone to sleep with the icon, i cant accidently slide the keyboard out a touch and have the phone wake up.
The whole deal has to do with tilt 2's keyboard sensor and magnet cases. With this app, the keyboard sensor still activates when sliding into a magnet flap case, while having slie to wake disabled
carhigh said:
Been using this app so i dont have to fumble with the power button to turn the screen off. Seems this app only turns off the screen and doesnt actualy put the phone in sleep. I would like an app like this that acts as the power button does. So when i put the phone to sleep with the icon, i cant accidently slide the keyboard out a touch and have the phone wake up.
The whole deal has to do with tilt 2's keyboard sensor and magnet cases. With this app, the keyboard sensor still activates when sliding into a magnet flap case, while having slie to wake disabled
Click to expand...
Click to collapse
Hiya,
I'm working on the program so that you can have configuration option to simulate power button to put phone in sleep mode or jus to turn the screen off. This utility was just for people who want to save power whilst listening to the music, etc.
Please keep any ideas/suggestion coming. Much appreciated guys.
Watch the space guys....
That is great inítiative. I use the screen off function actually for the purpose to save power when navigation. screen off when there is a long straíght way to drive.
Put device to sleep mode will cause gps signal lost, which is not so nice.
I can image that there will be a lot of person who wnat to have different adds-on on this small application, it might be a solution to provide command argument.
Thank you.
I will try to see whether this one works for my purpose. Actually in my situation, I even don't want any key be locked as these keys are mapped for navigation.
How about screen toggle thus it is possible to map this application to a key?
awesome, i mapped the exe to a hardware key next to standby. now i can easily save power while wardr listening to music. ^_^
it combines very well with s2u2 locking function too.
big thanks!
tom_hungston said:
Very simple and very very light application.
Does exactly what it says on the TIN.
The reason I compiled this application is purely to avoid using power button as I don’t want it to worn out. To turn the screen on or off we have to use power button which might stop working if we use the button too much. This application will cut the use of the power button by 50% at least
Rather than using the power button to turn the screen on and off, tap on this application to turn the screen off. Very small application V1.0
I might release another one when I get feedback from the users.
If you want just exe file then copy it in to your phonewindows->start menu-> program folder
Or use cab file which will install it on the above location for you
Enjoy !!!!
Click to expand...
Click to collapse
Tom, may be it was to late to find your toggle light off switch, but it was very important for me to find it, thank you man, you solved a terrible issue for me, which is that programs stop updating (eg: twitter) when the device is in standby mode.
I heard that you can release another one, so my feedback is:
it takes about 2 seconds to turn off the light, isn't there any faster??? ))
This application is great. Combined with the S2U2 and HD Tweak i don't even have to use the power button at all. Device locked by S2U2 as soon as i turn off the light, waking up device by pulling out the stylus and rebooting with the help of HD Soft reset. Thanks
P.S. You should really add a decent icon, even though people can change it if they want to.
how do i enable slide 2 lock on the phone when it's power off or back light goes off? it seems the only way to get slide 2 lock is to hit start then tap lock....
I think this is what you are looking for. Its what i use and works perfect! my screen locks when my backloight goes out or i hit my power button to turn it back on.
http://thewingster.com/autolockscreen.aspx
Also Got it from this thread in the software forum. Good place to look for good apps and utilities for the TP2
There are also a couple other auto lock screens here too but the link above is what i use.
http://forum.xda-developers.com/showthread.php?t=550973
klash said:
I think this is what you are looking for. Its what i use and works perfect! my screen locks when my backloight goes out or i hit my power button to turn it back on.
http://thewingster.com/autolockscreen.aspx
Also Got it from this thread in the software forum. Good place to look for good apps and utilities for the TP2
There are also a couple other auto lock screens here too but the link above is what i use.
http://forum.xda-developers.com/showthread.php?t=550973
Click to expand...
Click to collapse
thanks..i installed it..but not sure how to launch..i can't find it in programs..or start..any idea?
judicious said:
thanks..i installed it..but not sure how to launch..i can't find it in programs..or start..any idea?
Click to expand...
Click to collapse
Its in the start --> settings --> system area of the phone and its called smart lock. To autolock when backlight goes off check the suspend lock box
do you know if there's a way to lock when pressing the power button slightly?
thats what it does the hit the power button to turn the backlight off and when you turn it back on it will be locked
i just soft reset and now it hangs on the windows screen and won't boot. not sure what to do.
klash said:
thats what it does the hit the power button to turn the backlight off and when you turn it back on it will be locked
Click to expand...
Click to collapse
This program WAS working great for me earlier this evening, and I was happy with it.
But it randomly stops working (I'll hit the power button and then hit it again, and it won't have locked the device).
>_> Any thoughts / solutions?
judicious said:
how do i enable slide 2 lock on the phone when it's power off or back light goes off? it seems the only way to get slide 2 lock is to hit start then tap lock....
Click to expand...
Click to collapse
You can also manually lock (with WM6.5) by pressing and holding the end/home key, unless you've assigned it to something else (see Settings --> Personal --> Buttons). Additionally under Settings --> Lock you can check the "Prompt if phone unused for" box and set a time (i.e. the same time as you set the backlight off), but you then do have to enter a PIN or password of your choice, I believe (which I do anyway for security).
I tried various apps such as S2U2, but found them excessively battery heavy or buggy, although Touchlock pro had loads of settings (including using stylus, keyboard, g-sensor etc.) which I possibly didn't configure right!
thanks for the feedback, i do notice sometimes this does not work...i've switched to s2u2 to see how it goes.