Hi All,
First of all, credit goes to the original ROM author - jasjamming
Based on the Black v3.0.1, I have changed the following:
- Remove English SIPs (Letter Recognizer, Block Recognizer etc).
- Set Keyboard SIP as default.
- Included Windows CHT IME (M$ Phonetic & Chajei).
- Included Windows CHS IME (M$ PinYin).
- Included Windows JPN IME (M$ Kana & Romaji).
- Included PIM Backup v1.9.0.0
- Added CommManagerVibrateFix.
- Applied WM VI Black Update BT Drivers.cab.
- Added mingliu font, change wince.nls for Chinese/Japanese/Korean support (Korean need proper fonts).
- Added ClearTemp v0.9.2.4.
- Enabled NITZ time sync by default.
- HTC X-Button/Task Manager updated to v1.5.
- Replaced IA_Zip with PocketRAR v3.6 (freeware)
- Added VistaHide Battery Bar.
- Added SIP_CHT, SIP_CHS, SIP_JPN cab files for change SIPs (located in \Windows\)
- Replaced built-in MobileCalculator to Eval.
- Upgraded Office to 2007 version. (support docx, xlsx, pptx etc)
I've also included 3 cab file in the \Windows folder -- SIP_CHT.cab SIP_CHS.cab SIP_JPN.cab
Please remember to install one of the cab file to enable the inputs (soft reset after installation), otherwise only english input is available.
For additional programs (eg, VOIP, MSN Messenger), please visit the original black thread.
For chinese description or screenshots, please visit:
http://blog.yam.com/leo2016/article/10104618
Download:
http://www.sharebig.com/d/spxowmtll/0t9cFGM464C682B0E/Black_v3.0.1-CCS.zip.htm
(password: [email protected])
or
http://www.megaupload.com/?d=OAF20XT6
great thanks
looking forward to try this one out! thanks!
Thanks a lot for this new rom release
Any Traditional Chinese Handwrite Input function?
Thanks
As Ricky said, i would also like to thank jasjamming first...
now..
THANK YOU THANK YOU THANK YOU Ricky. Your solution is the only one that works stably for reading chinese... again, thank you very much!
Hi Ricky
I just installed the rom, and I notice that the font size is funny. The default size for the menu item does not change even if i change it in the screen adjustment screen (Settings-> system -> Screen). This does not happen with your old rom...
Thanks!
Slider
HKFreak:
Sorry that I did not include any of the handwriting software this time, I was trying to create a cab file for the Handwriting, however, everytime I installed the cab file I made the touchscreen would stop function (need to use hard reset to fix).
I'll find a solution later on... (oh well... maybe it's time to try 3rd party inputs )
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
X01HT Installed and Working Well!
Well done Ricky, awesome job. I found the Japanese input pretty painful, as it didn't have the correct romaji option, instead the layout for a true Japanese keyboard, which the X01HT doesn't have.
I used Asukal's one (tried to upload, but no go) and that is exactly as it should be. You might look at replacing your's with that one.
I will let you know how it goes as I run it through its paces, but its looking impressive so far.
Now where's the Black 3.5 version
Thanks, got it!!
Sorry, got it, thanks
thanks to you and the original rom chef jj. would like to know is 簡易 input method included?
RickyLan said:
HKFreak:
Sorry that I did not include any of the handwriting software this time, I was trying to create a cab file for the Handwriting, however, everytime I installed the cab file I made the touchscreen would stop function (need to use hard reset to fix).
I'll find a solution later on... (oh well... maybe it's time to try 3rd party inputs )
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
Click to expand...
Click to collapse
Mind if you post the cab file here? I need the CHT hand writing indeeded!!!~
RickyLan said:
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
Click to expand...
Click to collapse
Thanks Ricky.. I notice text break problem too, and this happens even with regular English rom + CE-Star.. so I guess we can only choose no line breaks, or weird font size... :-\
I've been runing the ROM ever since it went up and haven't had to do a reset yet, whereas with the straight Black 3.01 with the hacks to get it using Japanese, I found myself resetting 5 or more times a day.
Thanks for a great stable release!
Is this rom built up from black 3.0 insted of 3.01?????
I found the Black 3.0 bug still on this ROM....
1) today theme cannot be changed(only Top/Under Bar can be changed)
2) symbol pad cannot be loaded.
how to use korean
I want use korea.
how can i use korea language.
The Voice Command button also disabled. Any idea how to enable it?
And is it possible to set the default input from '拼' to English? (For both keyboard and soft keypad) Thanks!
Ricky, can you post the Japanese SIP cab file on its own?
I'm trying to muck around with Black 3.5. and the Asukal one I've been using up until now doesn't want to work properly.
flashed this no prob. used it to replace 3des + CE Star, which was a very unstable combination.
this is working great. fine job Ricky, and also to whoever did black. Nice ROM. I love my phone again.
anyone know where there is a manual on the input methods. they take some getting used to after CEStar, a manual would help.
hamster0914 said:
Ricky, can you post the Japanese SIP cab file on its own?
I'm trying to muck around with Black 3.5. and the Asukal one I've been using up until now doesn't want to work properly.
Click to expand...
Click to collapse
Really , just can't enable kansaku & tegaki. On 3.5 & all the new released roms.
Yes. All versions > 2.5 seemed not support SIP switching.
I guess some REGISTRY changed.
I switched to LVSW two weeks ago.
It works great!
Cedricguo said:
Really , just can't enable kansaku & tegaki. On 3.5 & all the new released roms.
Click to expand...
Click to collapse
Hi to all,
sorry for my bad English.
I make an Italian lite cooked ROM but I have two little problem.
First i want to change the link on the right softkey (I remove the Samsung menu) but if I modify the registry the softkey remain mapped to the Samsung Menu.
The second think is the WAP/GPRS configuration, at the first boot I don't have any connection configured on the phone, I must swap to a different operator and then reselect my operator to make all work.
Any idea ?
Thanks
Hi,
I've done some searching and tried a few fixes but I can't seem to get the right mapping on my keypad. What I've done so far:
1. Installed Tegic eT9 US English.CAB
2. Used Excalibur eT9 Changer to set to US Keyboard
My keypad works normally but the FN keys like ! are mapped to an AZERTY keypad. Am I missing something? If there are any easy fixes that'd be ideal but I am comfortable creating a custom keymap if necessary (links to how to do that would be nice )
Using WM 6.1 . Any help appreciated.
Here download this, it should fix your problem... Also, restart your phone after installing it...
Here it is
That fixed it! thanks!
No problem man, always willing to help out
Hi all,
It seems that i'm loosing abilties of the touchscreen keyboard ( loosing ABC mode )
I hope that some one can post the original files.
Cause I dont know what to do else
I havent changed anything about my keyboard...
Hope you guys can help me out
Thnx in advance
do u mean u are stucked in "number mode" of the keyboard ?
lcw622 said:
do u mean u are stucked in "number mode" of the keyboard ?
Click to expand...
Click to collapse
Yes indeed !
Edit:
Any solution to that??
I too have this problem, or at least something similar.
I flashed to Davideuk's V2 Topaz rom. After installing I found the new keyboard worked in both keypad and qwerty with t9 support However today I discovered that t9 no longer works and the keypad only types numbers, even with the letters showing and regardless of t9 or ABC selected. This evening I'll probably re-flash the rom and go through my settings and apps, checking 1 at a time to see what breaks it... unless someone knows of a fix already?
millski said:
I too have this problem, or at least something similar.
I flashed to Davideuk's V2 Topaz rom. After installing I found the new keyboard worked in both keypad and qwerty with t9 support However today I discovered that t9 no longer works and the keypad only types numbers, even with the letters showing and regardless of t9 or ABC selected. This evening I'll probably re-flash the rom and go through my settings and apps, checking 1 at a time to see what breaks it... unless someone knows of a fix already?
Click to expand...
Click to collapse
No need to flash new ROM. If you have HD Tweak installed scroll down to T9 Mode and disable it. Your keyboard should be totally operational again!
Fallen Spartan said:
No need to flash new ROM. If you have HD Tweak installed scroll down to T9 Mode and disable it. Your keyboard should be totally operational again!
Click to expand...
Click to collapse
Indeed this worked
Strange that it effects eachother.
Altho now I cant switch to T9 mode ....?
Fallen Spartan said:
No need to flash new ROM. If you have HD Tweak installed scroll down to T9 Mode and disable it. Your keyboard should be totally operational again!
Click to expand...
Click to collapse
Funnily enough I already tried that, but I must have forgotten to soft reset because after trying again (thanks to your advice) and resetting it worked. And my t9 works too Many thanks!
has anybody been able to get the Japanese KeyTouch SIP working on their Rhodium? i'm on an Asian WWE ROM and it's a no go for me. i've heard some people have gotten it working on theirs. can you please share what ROM it's working on and maybe how you got it working?
the program i'm referring to is included in Zgembo's Japanese Advanced IME
<<RESERVED>>
just because...
close but still no cigar.
i can get KeyTouch and emoji working temporarily on my Rhodium. On a fresh install, I first install Softbank MMS, then LetsJapan6 then restart.
After I restart, I install the Advanced IME but no restart after that.
If I do it that way, I can open up Softbank MMS and both English and Japanese prediction work, japanese input works, emoji works, and Japanese keytouch works. only english keypad is doesn't work correctly (outputs numbers only).
but this is temporary. after installing Enable_IME and restarting the system, none of the keyboards work properly anymore.
any help would be kindly appreciated.
i've finally gotten Keytouch working on my Rhodium! but I'm still running into a snag.
when the KeyTouch cab is installed, two of the registry changes it makes are:
Code:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409 > Ime File = compime.dll
HKLM\System\CurrentControlSet\Control\Layouts\e0010411 > Ime File = M5ImeMgr.dll
however, after a soft reset, the e0010411 value doesn't stay M5ImeMgr.dll. Rather, after a soft reset, it changes to compime.dll.
it seems like a rather simple issue to resolve. after my rhodium boots up, i input "M5ImeMgr.dll" manually, but so far everytime i reset, it goes right back to "compime.dll". any suggestions?
further research has shown that the e0010411 is simply mimicking whatever values are entered for e0010409. does anyone have any idea why? how can i make these two have separate IMEs?
seems either no one cared, or no one else in japan with a touch pro 2 had this problem, but i think i've finally found a solution. in my previous post, i mentioned that after a soft reset, the e0010411 value doesn't stay M5ImeMgr.dll, but that instead, it changes to whatever value is in Ime File is entered for e0010409. the simple solution (although i don't fully know its ramifications yet) is to just delete the Ime File value of e0010409 altogether. once i deleted that, my "Ime File = M5ImeMgr.dll" value of e0010411 no longer changes with a soft reset.
i hope this will be useful to others in the future... feel free to post any questions in here
did the softbank version come with a qrcode reader and stuff like that? can i flash my sprint cdma with the softbank firmware and somehow get it working on sprint with japanese cell phone features? can it work with the pay by your cellphone feature on japanese trains? or vending machenes??
Now, that WOULD be a cool feature, if anybody knows. I have never heard of this feature on WM phones in Japan. Torou, did you find anything?
not really. and ワ is wa torowa
Ive been using the cab from this thread on my TP2 and it works just fine:
http://forum.xda-developers.com/showthread.php?t=445550
Is this what you're looking to do?