http://www.mediafire.com/?nnnlxbhfdsr
Only 613.15 kb ?
it's XIP only..
panosha said:
Only 613.15 kb ?
Click to expand...
Click to collapse
As mentioned in the title, it's the core/xip.
^.^
Thanks / Dzięki
adwinp said:
As mentioned in the title, it's the core/xip.
^.^
Click to expand...
Click to collapse
x .
So whats new with this core?
Da9L said:
So whats new with this core?
Click to expand...
Click to collapse
It has a higher number?
Thanks!
adwinp said:
http://www.mediafire.com/?nnnlxbhfdsr
Click to expand...
Click to collapse
Thanks for the heads up....
l3v5y said:
It has a higher number?
Thanks!
Click to expand...
Click to collapse
hehe well that will not be enough for me to use it..
Da9L said:
hehe well that will not be enough for me to use it..
Click to expand...
Click to collapse
Haven't yet tried to port it, but I suspect marginally better performance, and the awesomeness of having the latest OS!
Have you the SYS too ?
sun_dream said:
x .
Click to expand...
Click to collapse
i read on some chinese site that you use xip 20296 - do you have xip.bin also?
Hello,
I have try to port this XIP, and my DPA don't boot !
Have you the XIP.bin ??? Thanks
Nixeus said:
Hello,
I have try to port this XIP, and my DPA don't boot !
Have you the XIP.bin ??? Thanks
Click to expand...
Click to collapse
Ditto here man!! got .bin or sys?
Nixeus said:
Hello,
I have try to port this XIP, and my DPA don't boot !
Have you the XIP.bin ??? Thanks
Click to expand...
Click to collapse
maybe you need to delete the imgfs signiture to make this xip work.
nosedive said:
i read on some chinese site that you use xip 20296 - do you have xip.bin also?
Click to expand...
Click to collapse
我有XIP.bin但我觉得没必要发出xip.bin，因为移植需要的是MS部分，所以我将OEMXIP删除后放出的，它的地址在MAP.txt都看到，这个部分4个目录都要移植，否则系统会不正常。
我相信20296速度很快以及良好的内存控制
sun_dream said:
我有XIP.bin但我觉得没必要发出xip.bin，因为移植需要的是MS部分，所以我将OEMXIP删除后放出的，它的地址在MAP.txt都看到，这个部分4个目录都要移植，否则系统会不正常。
我相信20296速度很快以及良好的内存控制
Click to expand...
Click to collapse
hey sun_dream, thanks for that response...
your xip does not work for me if i try to port this over my 20275 or 20273 build in trinity ... i found also out that there are some modules missing (fatutil.dll and some others)
thats why i asked for the xip.bin - i'd like to test this xip but i can't get it working
嘿sun_dream ，感谢您的回应...
您的xip不工作，如果我尝试的港口，这超过我的20275或20273 ，建立在三一...我发现，也有一些模块失踪（ fatutil.dll和其他一些）
这就是为什么我问为xip.bin -我想测试此x ip，但我不能得到它的工作
nosedive said:
hey sun_dream, thanks for that response...
your xip does not work for me if i try to port this over my 20275 or 20273 build in trinity ... i found also out that there are some modules missing (fatutil.dll and some others)
thats why i asked for the xip.bin - i'd like to test this xip but i can't get it working
嘿sun_dream ，感谢您的回应...
您的xip不工作，如果我尝试的港口，这超过我的20275或20273 ，建立在三一...我发现，也有一些模块失踪（ fatutil.dll和其他一些）
这就是为什么我问为xip.bin -我想测试此x ip，但我不能得到它的工作
Click to expand...
Click to collapse
lol... You have to add the OEM section from your devices XIP to this. This is only the MS section of the XIP....
nosedive said:
hey sun_dream, thanks for that response...
your xip does not work for me if i try to port this over my 20275 or 20273 build in trinity ... i found also out that there are some modules missing (fatutil.dll and some others)
thats why i asked for the xip.bin - i'd like to test this xip but i can't get it working
Click to expand...
Click to collapse
adwinp上传的的OUT压缩文档数据已经损坏,并且有些地址丢失,我上传原始的20296OUT吧!
LangDB/MSPPCXIPKernel/MSXIPKernel/MSXIPKernelLTK
全部都要移植，否则机器无法启动！
http://www.brsbox.com/filebox/down/fc/bd2bdda4f1b15eab0c837507c4a0fb9b
90248000 hd.dll
90249000 osaxst0.dll
Related
for Wizard, Atom, Himalaya,BA so when we are getting it....
hdubli said:
for Wizard, Atom, Himalaya,BA so when we are getting it....
Click to expand...
Click to collapse
the Universal will be had AKU3 very soon.
Thanks for the prompt information..
mwang said:
hdubli said:
for Wizard, Atom, Himalaya,BA so when we are getting it....
Click to expand...
Click to collapse
the Universal will be had AKU3 very soon.
Click to expand...
Click to collapse
can you be a little more precise (like 1 month .... ) and do you have some additional info (features, carriers)
thanks a mil !
decebal said:
mwang said:
hdubli said:
for Wizard, Atom, Himalaya,BA so when we are getting it....
Click to expand...
Click to collapse
the Universal will be had AKU3 very soon.
Click to expand...
Click to collapse
can you be a little more precise (like 1 month .... ) and do you have some additional info (features, carriers)
thanks a mil !
Click to expand...
Click to collapse
I am working now , there had AKU3.0 CHS verison in Chinese web site , I am working with bepe's tool to see can be change to wwe
Hi Mwang,
I think there could be two ways...u might be knowing but just adding here
one wud b to use Mamaich's tool to decode, change the language folders and then rebuild the ROM imgae
secondly, we can use Asukal's Language UI
this was just a logical thinking..
hdubli said:
Hi Mwang,
I think there could be two ways...u might be knowing but just adding here
one wud b to use Mamaich's tool to decode, change the language folders and then rebuild the ROM imgae
secondly, we can use Asukal's Language UI
this was just a logical thinking..
Click to expand...
Click to collapse
Those two ways dont work at all , i try so many way but not real stable also no camera ,give more time ,,,,,,,,,,,,
If you like to test something use this rom and have a look:
AKU3 Rom for Universal
http://forum.xda-developers.com/viewtopic.php?t=57483
AKU is like a service pack update right? Whats the difference between AKU 2.3 and 3?
What version does the Universal ship with as stock?
Hey, Ive been looking around and asked a few cooks already. Where would I find a virgin 20748 sys. Can someone PM who has it. Im cooking for the CDMA diamond, and wanna check out this sys. Thanks in advance
Hi,
I think that SYS 20748 is a BETA, and unnoficial build !
I advice you to cook on the 20721
Nevertheless, if you want this SYS ( 20748) go on the NIKKI section, there is the 20748 SYS, but you need to convert it on DPI 192 DPI !
Good LUCK !
Nixeus said:
I advice you to cook on the 20721
Click to expand...
Click to collapse
OK. Where can I find 20721 SYS?
If in Nikki's section, how to convert it to VGA?
Nixeus said:
Hi,
I think that SYS 20748 is a BETA, and unnoficial build !
I advice you to cook on the 20721
Nevertheless, if you want this SYS ( 20748) go on the NIKKI section, there is the 20748 SYS, but you need to convert it on DPI 192 DPI !
Good LUCK !
Click to expand...
Click to collapse
20721 is the stable one
ricky119 said:
20721 is the stable one
Click to expand...
Click to collapse
Where from can i download ?
Can somebody give me a link or something where I can find the 20721???
Take a look here
http://forum.xda-developers.com/showthread.php?p=2580837#post2580837
omaga said:
Take a look here
http://forum.xda-developers.com/showthread.php?p=2580837#post2580837
Click to expand...
Click to collapse
Thanks for the link
20931 released
http://down.xbeta.cn/uploads/Bingo123/Hermes_RomKitchen_20931.rar
topsign said:
20931 released
http://down.xbeta.cn/uploads/Bingo123/Hermes_RomKitchen_20931.rar
Click to expand...
Click to collapse
trying to download now and mirror...gosh it's SSSLLLOOOWWW!!! Looks like they're trying to do the same in the elf forums...http://forum.xda-developers.com/showpost.php?p=2893157&postcount=200
Can someone build a ROM with that?
section8prime8 said:
trying to download now and mirror...gosh it's SSSLLLOOOWWW!!! Looks like they're trying to do the same in the elf forums...http://forum.xda-developers.com/showpost.php?p=2893157&postcount=200
Click to expand...
Click to collapse
downloaded it with firefox an DownThemALl! (addon)
i had a speed from 1200kb/s... it isn't sooo slow
J3ssy said:
downloaded it with firefox an DownThemALl! (addon)
i had a speed from 1200kb/s... it isn't sooo slow
Click to expand...
Click to collapse
Rub it in why doncha Well, it's slow for me. Maybe I'll wait for you to mirror then.
I got it, where does you want it?
Rapidshare? Megaupload? 4shared? BTW is this ported from..... Kaiser? or what?
+ Que PPC said:
Rapidshare? Megaupload? 4shared? BTW is this ported from..... Kaiser? or what?
Click to expand...
Click to collapse
Megaupload? 4shared would be cool, and it's already ported for hermes i believe. i'll work on it tonight hopefully.
download:
rapidshare
megaupload
RS link:
http://rapidshare.com/files/163114052/Hermes_RomKitchen_20931.rar.html
Mediafire mirror ...
and 4shared mirror
joshkoss said:
Megaupload? 4shared would be cool, and it's already ported for hermes i believe. i'll work on it tonight hopefully.
Click to expand...
Click to collapse
Can't wait. It's been a while since we've seen a new build from you. Your ROM's have been the best!
whats the major changes on this build? i tried following every build that comes out and their changes....but i can never find a site that logs the changes. Thanks.
h2opoloplyr_11 said:
whats the major changes on this build? i tried following every build that comes out and their changes....but i can never find a site that logs the changes. Thanks.
Click to expand...
Click to collapse
as far as i know most of them are beta's leaked by microsoft with no build list changes.
Can't wait. It's been a while since we've seen a new build from you. Your ROM's have been the best!
Click to expand...
Click to collapse
Yea, sorry dude! been busy with family stuff. hopefully i'll get some free time in the evening to work it.
joshkoss said:
as far as i know most of them are beta's leaked by microsoft with no build list changes.
Yea, sorry dude! been busy with family stuff. hopefully i'll get some free time in the evening to work it.
Click to expand...
Click to collapse
Don't mean to rush you. Take you time. I'll be here....
mikehippe said:
Don't mean to rush you. Take you time. I'll be here....
Click to expand...
Click to collapse
as will i. you guys are my home!
does the kitchen works?
I think I need to build the registry hv... isnt it? cause the Xip folder doesnt have folders...
+ Que PPC said:
I think I need to build the registry hv... isnt it? cause the Xip folder doesnt have folders...
Click to expand...
Click to collapse
Kitchen is not complete. it is first in chinese and i don't understand chinese, so you will need to port the sys to english, XIP is not complete you will need to dump the xip.bin from the os.nb and then dump xip.bin and port your xip folder. it's a little extensive as you can see.
Hermes 21159 Kitchen
xbeta has posted the Hermes kitchen build 21159. If anyone is interested....
section8prime8 said:
Hermes 21159 Kitchen
xbeta has posted the Hermes kitchen build 21159. If anyone is interested....
Click to expand...
Click to collapse
new 6.5 build?
joshkoss said:
new 6.5 build?
Click to expand...
Click to collapse
Looks like it. I'm trying to work with it now. Damn shell errors
joshkoss said:
new 6.5 build?
Click to expand...
Click to collapse
Yes, i have been build it yesterday but it has some bugs and it seems the fast like 21140. I am waiting for new build.
TAI_Sw said:
Yes, i have been build it yesterday but it has some bugs and it seems the fast like 21140. I am waiting for new build.
Click to expand...
Click to collapse
TAI, did you get the shell error on startup?
section8prime8 said:
TAI, did you get the shell error on startup?
Click to expand...
Click to collapse
Yes, you have to check some files of shell. But it work not better than 21140.
TAI_Sw said:
Yes, you have to check some files of shell. But it work not better than 21140.
Click to expand...
Click to collapse
Understood my friend. Thanks
section8prime8 said:
Understood my friend. Thanks
Click to expand...
Click to collapse
I encountered the same problem. Shell error at startup, can tell me some details about how to solve the problem? Thanks.
saxon8506 said:
I encountered the same problem. Shell error at startup, can tell me some details about how to solve the problem? Thanks.
Click to expand...
Click to collapse
mui problem dude!!! look for 804 mui files and replace from my 21159 409 mui files from my kitchen thread.
Thanks, you mean mui files made shell error?
I download Hermes 21159 Kitchen from Xbeta, and just want to cook a CHS room, but after sys port, shell error occurs when startup. May the reason was not 0804 mui files?
joshkoss said:
mui problem dude!!! look for 804 mui files and replace from my 21159 409 mui files from my kitchen thread.
Click to expand...
Click to collapse
i've been trying to port it with xipporterEx but no luck
Anyone have this yet ported and want to share?
thanks a lot
udK has. His current Diamond ROM is running build 21032.
Driskol said:
i've been trying to port it with xipporterEx but no luck
Anyone have this yet ported and want to share?
thanks a lot
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=467460
1st post: 21038 XiP and SYS, ported for diamond and ready to cook.
adwinp said:
http://forum.xda-developers.com/showthread.php?t=467460
1st post: 21038 XiP and SYS, ported for diamond and ready to cook.
Click to expand...
Click to collapse
WOW thanks ^^
just a few minutes after my post xD
What kitchen can i use to merge the nb.payload?
Im using currently the surface