Dear all,
(How) can I send and receive fax with my Hermes?
I supose I have to use some kind of software... But... Which one?
Can anyone point me in the right direction?
Thank you in advance.
Cheers.
http://www.google.com/search?num=10...d=1&q=send+receive+fax+windows+mobile&spell=1
If you want to fax using the device itself, check the link above. If you want to fax from a pc by using the phone as a modem, check here.
or....
Vodafone NZ has a service where they have a special number assigned to you, so you can receive faxes. Paid service of course, or you can use the above links also for alternatives.
zeek112 said:
http://www.google.com/search?num=10...d=1&q=send+receive+fax+windows+mobile&spell=1
Click to expand...
Click to collapse
Google is the key eh!
Not quite
ai6908 said:
Google is the key eh!
Click to expand...
Click to collapse
Well, if you know the keyword and it doesn't give you junk!
MFaxCE doesn't support wm5 nor wm6.
WModem in later roms don't seem to support AT commands properly, just a subset so that *99# dials onto 3g internet.
And.. we're back where we started, no fax over gsm/3g, except internet based services.
Related
hi i have a orange sim with 2 lines and when i put it into my m2000 i cannot find a way to select line 2, ive rung orange but they did not know if the m2000 supports line 2, can someone out there please help me. thanks in advance.
The SPV M2000 DOES NOT support Line 2.
It actually used to say this on one of the Orange Info pages about the SPV M2000 but I can't seem to find it now.
Sorry. You are out of luck
It does accept incoming calls and text's on line 2.
However as stated you can not text or phoen out on Line 2.
I was under the impression that this was a software issue and was being investigated by Orange ? ? ? ?
Paul Thomas said:
I was under the impression that this was a software issue and was being investigated by Orange ? ? ? ?
Click to expand...
Click to collapse
Yes it's definetly a software issue, because as you've said the phone does receive them, but I think it's more down to Windows Mobile 2003 SE. Does ANYONE have a Pocket PC phone that *does* support Line 2?
It's not going to be something Orange can fix though. At least... I wouldn't think they would be able to.
I've also noticed that it doesn't support Fax either :-( Same problems. Can receive on it, but not send via dedicated fax number :-(
(I'm using an XDA IIs, but the standard O2 ROM didn't do any Line 2 etc, nor does the iMate PDA2K ROM it's running now)
:-(
well based on this it does not support line 2 (long way down the text)
http://www.modaco.com/index.php?s=e1900157cb3ffc40d1d7e2d1ecfe95a7&showtopic=197862
Fax is operator dependent (and you need the software)
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Applications
Seems like T-mobile (Germany) can as they add the software in the EXT Rom.
MDAIIIUser said:
Fax is operator dependent (and you need the software)
Click to expand...
Click to collapse
Hi,
Yes I've got that software/operator support already, but it won't just automatically receive the fax number. At least I can't make it. There's only a "next call is a fax" which isn't particularly helpful.
And when you send a fax it goes from your primary number, not the fax number that's lined up with your account. That's the problem I have anyway.
--Neil
THIS IS THE SOLUTION FOR ME WITH YOUR ANSWERS
1) Create any VoIP Account with a provider (for example I use VoIPStunt)
2) Configure the wm6 voip with your settings account:
http://forum.xda-developers.com/showthread.php?t=299950
or more easy,
http://forum.xda-developers.com/showthread.php?t=303493
3) Talk using VoIP:
http://forum.xda-developers.com/showpost.php?p=1233797&postcount=14
4) Call to SIP address:
http://forum.xda-developers.com/showpost.php?p=1235084&postcount=21
and
http://forum.xda-developers.com/showpost.php?p=1234112&postcount=19
Thanks a lot for your help.
Toni
Hi all,
sorry if this post is OFFTopic for this forum, but I search and read other post and I not find the solution.
I want use the WM6 VoIP (with lVSW ROM). I install the voip cab and the settings for my provider.
The question is: how can I receive calls? how can I make calls? I not find any dialpad or similar to make it.
Thanks a lot and sorry for the offtopic.
Toni
Click to expand...
Click to collapse
I have been reading a little about this but have not done anything about it because been to busy flashing...lol...but anyhow if you already did everything i think i read that in order for it to work you need to be connected to WIFI, not your isp...if im wrong please correct me someone!! and if anyone got it to work with AT&T please post carrier settings please!
ToniSC said:
Hi all,
sorry if this post is OFFTopic for this forum, but I search and read other post and I not find the solution.
I want use the WM6 VoIP (with lVSW ROM). I install the voip cab and the settings for my provider.
The question is: how can I receive calls? how can I make calls? I not find any dialpad or similar to make it.
Thanks a lot and sorry for the offtopic.
Toni
Click to expand...
Click to collapse
If you searched in the forum you would have found this thread
http://forum.xda-developers.com/showthread.php?t=299950
Hi Shaun33
I found this post and I read all the commants. I make all steps that post indicated, but my problem is that I doesn't know how to use the wm6 voip.
In the same port, anybody has the same problem, but there hasn't answer.
Thanks.
Toni
if you can't see an answer in the thread (http://forum.xda-developers.com/showthread.php?t=299950) then there probably isn't an answer!
ToniSC said:
Hi Shaun33
I found this post and I read all the commants. I make all steps that post indicated, but my problem is that I doesn't know how to use the wm6 voip.
In the same port, anybody has the same problem, but there hasn't answer.
Thanks.
Toni
Click to expand...
Click to collapse
Why not you post what you have done & we identify what is the problem & give the solution.
i think he just wants to know how to actually use it
I am wondering, if he buy the VOIP service or not....
I wanna ask, will other VOIP service provider work on WM6?
like SunRocket or ViaTalk, etc.
TIA
ToniSC said:
Hi all,
sorry if this post is OFFTopic for this forum, but I search and read other post and I not find the solution.
I want use the WM6 VoIP (with lVSW ROM). I install the voip cab and the settings for my provider.
The question is: how can I receive calls? how can I make calls? I not find any dialpad or similar to make it.
Thanks a lot and sorry for the offtopic.
Toni
Click to expand...
Click to collapse
If I understand you correctly, you want to know how to make a call after getting your VOIP settings. Actually, there is no separate dial-pad for a VOIP call - you have to use the existing dial-pad which you would normally use when making a cellular call.
If you have set up your VOIP settings correctly, your plug in on your Today screen should say "your VOIP service:Available or Searching" instead of Internet Calling : Available/Not Available.
In my case, I use Gizmo, so it says Gizmo:Available (when it's not connected) and Gizmo:Searching (when connected via wifi).
When it says Searching, you click on the plug-in, then go to your normal dialing pad where it should also say "Gizmo" on the top right hand corner to indicate that WM6 is using VOIP instead of GSM to make the call.
Hope this helps.
As I am a noobie, I would appreciate it if the senior members could either confirm the above or correct anything which is wrong above.
arul said:
If I understand you correctly, you want to know how to make a call after getting your VOIP settings. Actually, there is not ..........
Click to expand...
Click to collapse
This is the correct "Usage Instructions" for voip.
This is also how I experienced it. Voip only connects through WIFI, although I have made the registry changes as mentioned in another thread. It will be nice if you can select which service to use eg. VOIP or GSM
what if i want not use voIP but my gsm network to call. there is isnt any option to do that once you setup voip. you can disable it but thats not the point. nokia's give you option. am i wrong?
nolovelust said:
what if i want not use voIP but my gsm network to call. there is isnt any option to do that once you setup voip. you can disable it but thats not the point. nokia's give you option. am i wrong?
Click to expand...
Click to collapse
Just tap the today screen item for it toggles between VoIP and GSM
ok... lots of speculation here. Let me tell you what I know:
VoIP, when properly installed, works in the following manner. (If you can't obtain these results then your ROM needs upgrading or your provisioning is incorrect).
Initially, the Internet Calling today screen plugin will show "off" when VoIP is set to "Never" in the Internet tab of phone settings.
When connected to WiFi, you can change this setting to "whenever available". At this point, a properly provisioned VoIP installation will show your VoIP provider from the provisioning XML and "Searching". Shortly after, "Searching" will change to "Selected". At this point all outbound calls placed from your phone will be through your VoIP provider. In fact, the phone skin will show this name too.
However, your phone will ring for incoming calls made to your GSM phone number as well as your VoIP phone number
Now, tapping "Selected" on the Today screen VoIP plugin will change this status to "Available".
At this point, outbound calls get placed through your GSM provider again and the phone skin will show your GSM provider name.
However, inbound calls to both your GSM and VoIP numbers will still ring on your phone.
Turn off VoIP again by going to phone settings and changing the calling network to Never.
Additional notes:
The "Searching" forever behavior previously described is a Bug in some WM6 releases. lvsw 4/23 doesn't have this issue.
You can also set VoIP to work over 3G as well as WiFi by removing the values "1" and "2" in HKLM\Comm\RTC\AdapterTypes. However, there are issues with this that haven't been fully resolved yet. Incoming calls work fine but the called party can't hear you when you place an outgoing VoIP call over 3G.
so there is no way to do this
dial a number select or even press voip button and you dial via voip.
i hate symbian but i might just have to carry to phones because voip enabled nokias can do it.
hmmm maybe you didn't understand. Sorry about that. Short answer is No, there is a way to do this. You can dial any way you want with VoIP active. Just toggle the today setting between "Selected" or "Active" to choose which to use.
Computer to computer calls
I was wondering if there could also be made computer-to-computer-calls. Is there a way to enter 'voip-names' instead of phone-numbers?
at&t CallVantage
How about those of us on Cingular or "The New at&t" is it possible to subscribe to the at&t VoIP service called CallVantage and then get it working on the Hermes?
@tembares:
You *could* try calling directly to the other phone's IP address. the default dialplan supports this. use the following syntax (example assumes you're calling a phone whose address is 192.168.0.1):
192*168*0*1
@brandyholt:
If the AT&T Callvantage service supports a SIP based softphone then the answer is yes.
Thanks a lot Sleuth255 and all people answer to me.
Finally I have been able to make work it!!!!!
@Sleuth255
One question please, if 192.168.0.1 is 192*168*0*1, how I dial for call to an SIP address, for example my gizmo address [email protected]
Toni
Sleuth255 said:
@tembares:
You *could* try calling directly to the other phone's IP address. the default dialplan supports this. use the following syntax (example assumes you're calling a phone whose address is 192.168.0.1):
192*168*0*1
@brandyholt:
If the AT&T Callvantage service supports a SIP based softphone then the answer is yes.
Click to expand...
Click to collapse
Anyone already tried the new official HTC ROM (possibly german) and the Blackberry Connect Client (via BIS not BES)? If so, which version (2.1.2.54?)?
I have searched, googled and read so many threats and could not get a clear answer so far.
/edit: It's working - see below.
Thanx, appreciated.
StonyA said:
Anyone already tried the new official HTC ROM (possibly german) and the Blackberry Connect Client (via BIS not BES)? If so, which version (2.1.2.54?)?
I have searched, googled and read so many threats and could not get a clear answer so far.
Thanx, appreciated.
Click to expand...
Click to collapse
I can not believe that amongst so many pros here, no one can confirm? Guys, I really need your help here. Many thanks!!!
Hi
I'm running the HTC released ROM & have BB Connect 4.0 working perfectly on T-Mobile UK.
I'm using the version attached. I installed it and then sent a new service book to my device & it works a treat without ANY messing...
Good luck!
It Works !!!!!!!!!!
gavinmoffitt said:
Hi
I'm running the HTC released ROM & have BB Connect 4.0 working perfectly on T-Mobile UK.
I'm using the version attached. I installed it and then sent a new service book to my device & it works a treat without ANY messing...
Good luck!
Click to expand...
Click to collapse
Hi Gavin,
Thank you indeed for your reply and encouraging message. I will give it a shot and hope for the best.
**edit: Just installed the new official ROM (WM6 German) as well as the BB Connect Client 4.0.0.90 in combination with BIS (not BES) and I am happy to confirm that it's working like a charm. Things I needed to do for the BB Connect client were a couple of reboots until I got my PIN again (same as I had before). After another reboot it started connecting and finally I had my service books sent via my BB internet account and voila - connected and running. Hope this helps others as well. Thanks to Gavin again!!!
All the best
Stony
hi
how come when I install this program doesn't it return me the initial pin and it always tells me in suspended?
Unfortunately not having the pin I cannot effect some it records on my supplier of services to be able to unload the emails.
So this means it should also work on Black Satin and other popular WM6 roms?
Arnie
i run the Offical Offical AT&T ROM by vp3G (vp3G3.0.0) and this cab files works perfect with my BES servers.
This is what I have been waiting for - am going to try it now.
Can I suggest the title of this thread be changed to "NEW BBConnect Version works with WM6 ROMs". I know there are many waiting for an updated version that works without having to Hexedit the build. The current title is a bit misleading.
DvTonder said:
This is what I have been waiting for - am going to try it now.
Can I suggest the title of this thread be changed to "NEW BBConnect Version works with WM6 ROMs". I know there are many waiting for an updated version that works without having to Hexedit the build. The current title is a bit misleading.
Click to expand...
Click to collapse
Hi,
I have changed the title to reflect the current status.
Piluco,
I got my pin after a few restarts (soft reboots) straight from the network. It was the same pin I had before using WM5 and BB Connect 2.1.2.16.
Cheers
Stony
piluco said:
hi
how come when I install this program doesn't it return me the initial pin and it always tells me in suspended?
Unfortunately not having the pin I cannot effect some it records on my supplier of services to be able to unload the emails.
Click to expand...
Click to collapse
Do you have a BB Connect plan through your provider? My PIN didn't show up until I changed my Data plan to a BB Connect plan with Rogers.
Khristopher said:
Do you have a BB Connect plan through your provider? My PIN didn't show up until I changed my Data plan to a BB Connect plan with Rogers.
Click to expand...
Click to collapse
hi
I use vodafone italy and unfortunately I cannot create an account bb connect in how much actually to that the pin I don't have I cannot go on on the site to create my account. I have made many soft reset and tried various programs of bb connect but never anybody that has returned me the pin to be able to shape then my account near my supplier of services.
arnoutboer said:
So this means it should also work on Black Satin and other popular WM6 roms?
Arnie
Click to expand...
Click to collapse
I have BBconnect 4.0.0.90 working OK with the Black X beta2 ROM
anonamouse said:
I have BBconnect 4.0.0.90 working OK with the Black X beta2 ROM
Click to expand...
Click to collapse
I use the scahps 3.54b and unfortunately it doesn't work me the bb in how much it doesn't return me the pin for configuarare the account from the site of vodafone italia
The PIN will only be generated when your service provider activates the BlackBerry service on your account....
Have you asked Vodafone Italia to active BlackBerry facilities on your account? If not, no version of BB Connect will work!
gavinmoffitt said:
The PIN will only be generated when your service provider activates the BlackBerry service on your account....
Have you asked Vodafone Italia to active BlackBerry facilities on your account? If not, no version of BB Connect will work!
Click to expand...
Click to collapse
talking to the operator of vodafone he has explained me the procedure to activate the account but as first footstep going on the site he asks the pin but me unfortunately I am not able avero not having a blacbarry
piluco said:
talking to the operator of vodafone he has explained me the procedure to activate the account but as first footstep going on the site he asks the pin but me unfortunately I am not able avero not having a blacbarry
Click to expand...
Click to collapse
Hi piluco,
Have you set up your account, e.g. via www.mobileemail.vodafone.it ? At any rate and as described above, your provider will have to activate your account plan first.
Cheers,
Stony
StonyA said:
Hi piluco,
Have you set up your account, e.g. via www.mobileemail.vodafone.it ? At any rate and as described above, your provider will have to activate your account plan first.
Cheers,
Stony
Click to expand...
Click to collapse
thanks
in fact if I go there and I go to create an account the first thing that asks me it is the pin of the car that then is that that the program not me from after having him/it installed in the pocket
Schaps roms?
Hi All,
Has anyone else got any of Schaps ROMs working with BBConnect then? I was of the belief that his ROMS wouldn't work?
Looking at either 3.54b or 3.54c ideally
Thanks in advance
EDIT: Had a quick flash anyway and it works a treat!
It wors on SPV M700 Romanian
I am using WM6 (Dopod's D810 ROM) an BB Connect 4.0.0.90 and it works perfectly .Thx a lot .
gavinmoffitt said:
Hi
I'm running the HTC released ROM & have BB Connect 4.0 working perfectly on T-Mobile UK.
I'm using the version attached. I installed it and then sent a new service book to my device & it works a treat without ANY messing...
Good luck!
Click to expand...
Click to collapse
Which EXACT version of ROM you use ? Please, publish version and build number which you can find using "Settings-System-About" screen.
If i install fax program in my laptop, there are some way for connect the dash to the laptop for use with this faxprogram for send fax??
Some kind of motorola phone can work how modem but need data plan in the line.
thanks
a possible solution....
I know this is not the answer you want, and I'd be interested if it is possible to use the dash as a fax, too!
But the following works: there are some internet sites that let you send a fax by sending them a file (or maybe e-mailing a file). I started using one that is based in Germany: http://simple-fax.de (I've nothing to do with them, and haven't even been a customer for a long time...) A fax inside germany costs 0.07 EURO cent per page, and to the US 0.08 EURO cent per page. You have to fill up your account with paypall, and you get 14 cents free for a trial. To this site you send PDFs.
Many other such services exist - I'm sure there are also lots based in the US.
Of course you have to think about privacy and security of what you send!
Yeah You Can
ghostwheel said:
I'd be interested if it is possible to use the dash as a modem, too!
Click to expand...
Click to collapse
You can totally do that. Just go to internet sharing on your phone. If you have a data plan already, it will allow you to use your Dash/Excalibur as a modem for your pc to gain access to the internet.
If you need any more info just pm me or post on this thread. Later.
yes but do you say access to internet with the connection of the dash, but from the laptop you cant do call to any phone fax number for send fax.
if you know how.
thanks
outerdepth said:
You can totally do that. Just go to internet sharing on your phone. If you have a data plan already, it will allow you to use your Dash/Excalibur as a modem for your pc to gain access to the internet.
If you need any more info just pm me or post on this thread. Later.
Click to expand...
Click to collapse
Try sending the text you want to a fax machine and see it it responds. I know you can recieve a fax call, never thought to send one LOL.. I'll have to try it when I get home and see if it works.
i call to the fax number from dash and the faxmachine in the other side respond, i can use fax program from laptop or faxprogram from dash,
if i would connect the dash, how modem ,to the laptop. maybe will work.
Bupahs said:
Try sending the text you want to a fax machine and see it it responds. I know you can recieve a fax call, never thought to send one LOL.. I'll have to try it when I get home and see if it works.
Click to expand...
Click to collapse
Dash is capable of FAX calls both sent and recieved. It just there are not much of market demand for that sort of applications these days. Therefore developers are hesitant to release FAX program for mobile phones.
almost program are for ppc , i tried install in the dash but are not made for this phone.
SecureGSM said:
Dash is capable of FAX calls both sent and recieved. It just there are not much of market demand for that sort of applications these days. Therefore developers are hesitant to release FAX program for mobile phones.
Click to expand...
Click to collapse
Is this possiblle and what software do I need?
Jaguarp said:
Is this possiblle and what software do I need?
Click to expand...
Click to collapse
Hi Jaguarp,
you can try out this software that I just found, but i'm not sure if it's quite what you are looking for:
http://downloads.zdnet.co.uk/0,1000000375,39329589s,00.htm
I think it may be only compatible up to Windows 6.1, but I guess you can try it out and see for yourself
Regards.
Thanks mate, will try it. I'm planning downgrade to 6.1 anyway.
Jaguarp said:
Thanks mate, will try it. I'm planning downgrade to 6.1 anyway.
Click to expand...
Click to collapse
no problem at all, good luck
Cortado fax works ok, but I need software that can emulate fax machine in the way all-in-one printers do. This one connects to internet, sends data to Cortado server, and they somehow send fax with half an hour delay. I want to skip internet and send fax directly from phone. Anyone ever heard of such thing?