[UTIL]HTC Debug Tools - Touch Diamond, MDA Compact IV ROM Development

I found some tools in a part of french rom download in this forum.
You can test diamond nav pad, gsensor, position sensor, light sensor etc
I search in the forum but nobody talk about it.
do you know this tools.
exemple:with testHTCSensorDemoAP.exe
you can view position of the diamond, ambient value , brightness level.

Thanx ... was fun playing around with
Try the 'NavDbgTool.exe' ..... I didn't know that the entire bottom plate was touch!
And that there was Up, Down, Left, Right hardware buttons!
Cool!
Thanx for sharing!

NisseDILLIGAF said:
Try the 'NavDbgTool.exe' ..... I didn't know that the entire bottom plate was touch!
Click to expand...
Click to collapse
and it is not only touch sensitiv. it is capacitive (so it senses only your fingers, not the stylus, and you don't need to press, only touch like iphone), and it senses multitouch (you can use 2 fingers... like iphone)
FmsApp is the FM Radio tool, it shows also RDS. I have only one question. if there is a RDS capable FM tuner, why isn't TMC?

I'm enjoying the Nav Debug Tool as well
Thanks for finding this, great tools

WiZARD7 said:
and it is not only touch sensitiv. it is capacitive (so it senses only your fingers, not the stylus, and you don't need to press, only touch like iphone), and it senses multitouch (you can use 2 fingers... like iphone)
FmsApp is the FM Radio tool, it shows also RDS. I have only one question. if there is a RDS capable FM tuner, why isn't TMC?
Click to expand...
Click to collapse
If it does all that, maybe there is a possibility of assigning other functions to the touch-pad. Like what many are doing with the accelerometer....

timn2087 said:
If it does all that, maybe there is a possibility of assigning other functions to the touch-pad. Like what many are doing with the accelerometer....
Click to expand...
Click to collapse
Like a two finger zoom..

Thanks matou25 for this interesting tools.
I propose to build a list and a description of their actions/uses for each one :
A911Switch.exe ---> ???
Battery.exe ---> Battery infos
BTRouter.exe ---> Turn your device into BT Dongle ( need to be confirmed )
BTTest.exe ---> Test your BT module
ByteCounter ---> Data counter ( but for which interface ??? )
DCompassApp.exe ---> ???
DebugTool.exe ---> General debugging tool
DevHealth.exe ---> ??? ( It does not start on my device )
FmsApp.exe ---> Radio Tool
GPSRouter.exe ---> Turn your device into GPS USB Receiver ( need to be confirmed )
HTCGPSTool.exe ---> Test your internal GPS/ Satelites informations
ipsecvpnpm.exe ---> ??? ( about VPN )
memoRX.exe ---> ???
NavDbgTool.exe ---> Touchpad tool
NetworkTestPPC.exe ---> Network tool with very usefull Ping option
RegisterEditor.exe ---> (Very) Basic Registy Editor
testHTCSensorDemoAP.exe ---> Complete G-Sensor Tool
Unit_AT.exe ---> Something about "AT"
WLAN_eMapi.exe ---> Turn your device into Wifi Dongle ( need to be confirmed )
WLAN_LOG.exe ---> Enable/Disable Wifi Log files
WLAN_MAN.exe ---> WLAN Tool ( does it work? it does not for me )
You can help me to complete ths list if your know more than me
Regards.

I have put this Tool and the list on the wiki!
Pleas edit/add your findings there...
http://wiki.xda-developers.com/index.php?pagename=Diamond_Testing_Tool

Thank you man, good idea! it's perfect!

updated the wiki entry a bit..

The sensor tool is quite impressive, so much possibilities are open with that ! The fact that the bottom pannel is a multitouch sensor is just wonderful.
For the compass, I'd say those are generic debug tools for all HTC devices... So there might be a compass on the diamond, but I really think it's for another hardware... The Dream perhaps ?

Hmm could these tools maybe be used to calibrate the gsensor somehow ?

Has anyone else tested 'testHTCSensorAp' ??
My 'Ambient Value' is almost always 0, I have to but it up towards a lamp for it to react...
Anyone else got the same?
I hope my diamond isn't broken

A911Switch.exe ---> switch usb port to serial (i think)

DevHealth.exe
Hi,
I've done some investigation into DevHealth.exe. However it seems that the application isn't running (after the startup I get only "device-thinking" (rolling 4-colour circle) animation), I went to the Task Manager and even after pushing "x" mark during the startup the app uses about 86-87% of the CPU. After some time (3-5min?) it just went off by itself and dissapeared from the Task Manager list?? It left no additional files - maybe it just does some benchmark of the system??

for me ambient value is between 0 for dark to 768 for full sun light

pol280 said:
Hi,
I've done some investigation into DevHealth.exe. However it seems that the application isn't running (after the startup I get only "device-thinking" (rolling 4-colour circle) animation), I went to the Task Manager and even after pushing "x" mark during the startup the app uses about 86-87% of the CPU. After some time (3-5min?) it just went off by itself and dissapeared from the Task Manager list?? It left no additional files - maybe it just does some benchmark of the system??
Click to expand...
Click to collapse
DevHealth.exe give me a log in internal storage about memory usage during startup, dll load ......

origine of this tools
I found it in oemdrivers folder of os.nb french provide by
imobile.tw (Junior Member)
http://forum.xda-developers.com/showthread.php?t=412130
I think he could help us to know more about this tools.

matou25 said:
DevHealth.exe give me a log in internal storage about memory usage during startup, dll load ......
Click to expand...
Click to collapse
OK, I've found it. Got report named "mem_1.txt" in Internal Storage.

WLAN_MAN.exe
This one is WLAN Manager. It works on my device. I post the screen shot.

Related

Released: (as TESTING-rom) YuE_v11.2_3.15.20755_CrazyClean_WWE

TRANSLATION from russian:
"
Unlike ExtraClean no cameras and office. I would like to know that with tormoznutostyu and swallow batteries (for me because the battery ran, but I do not calibrated, and indeed shyus constantly).
Also interested in the problem with the unknown-call (corrected there something - can and should work).
Among the shortcomings:
- Failing to correct 3gp and some other formats (later learned) (actually the reason is clear and has popravlena);
- After HR and sometimes after SR in the second spleshe vylazit upper bar - live does not interfere;
- treated the creation of a server (feykovogo or not - your choice) - leave the server (not remove), and again will vylazit; manual mode in shedulere already issued
... "
Exclusively for tests to detect serious flaws.
SD card flashing ONLY !!!
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
​ Pls. post all findings
( NOT REQUESTS FOR ADD THIS or THAT !!!! - this is a minimalist thread / rom !!!)
here in this thread
Rapidshare:
http://rapidshare.com/files/150186904/YuE_v11.2_3.15.20755_CrazyClean_WWE.zip
Depositfiles:
http://depositfiles.com/ru/files/8394112&usg=ALkJrhihFWFwbfLNGAt7hXnmFatUogr2sg
PLEASE
how to install please
ke-kiat said:
how to install please
Click to expand...
Click to collapse
dirst you have to unlock your device see this
http://forum.xda-developers.com/showthread.php?t=311403
and then you have to flash it using the SD flashing here it is
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
THANK
you a best friend
just flashed my orbit working perfect just one bad thing no music play after power button press how to fix? Thanks good Job
kali80 said:
just flashed my orbit working perfect just one bad thing no music play after power button press how to fix? Thanks good Job
Click to expand...
Click to collapse
the easiest way is to assign a hard key for screen toggle and then when playing music with any player just press it
i attached a tool program.. and by you can do that.
the program called pocket toolman and can be founded here too
http://pockettoolman.blogspot.com/
to make a shortcut for toggle screen.. from setting choose option and in the third page check the box for screen of.. then assign a hard botton for it
if you are using manila then you have to run it twice (from the program menu) to open the option cuz it opens in the tray
cheers

[PATCH] WVGA - FIX for Navigon Mobile Navigator MN7 v 7.3.2 (Workaround)

Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Indeed. The 7.3.2 did not launch and I had to soft reset my Touch HD.
Thanks for your files !
Do you know what are the changes brought by 7.3.2, otherwise than the WVGA resolution failed attempt ?
Does not work good.
But good Try.
Cool
Working perfect for me
Thanks a lot
where find 7.3.2 ?
thank you
taz22 said:
where find 7.3.2 ?
thank you
Click to expand...
Click to collapse
All updates (maps, software, ...) are done via Navigon Fresh.
thank you
very much
i m stupid
dodo34 said:
Does not work good.
But good Try.
Click to expand...
Click to collapse
what exactly do you mean?
Probably he means that - at least for 480x800 - not better than what was given at
http://forum.xda-developers.com/showthread.php?t=446487&page=15 post # 148
but anyway thanks for other resolutions.
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
raz0r09 said:
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Click to expand...
Click to collapse
if you haven't changed any gps settings on the hd itself and if you don't use any port splitter like serilot or glopus, it should work with the following manual gps settings in navigon setup:
GPS Type: Internal GPS only
GPS-Port: Com4: ActiveDevice
GPS Baudrate: 4800
TMC: None
at least that works for me...
good luck
regards jan
NoRescue said:
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
Click to expand...
Click to collapse
You have to make sure that the screen is in landscape mode (which means not only hold the device in landscape, but have an open window (i.e. file explorer) which actually is displayed in landscape) BEFORE you start MN7, and it should stay like that all the time. MN7 gets "confused" when you change screen orientation during operation. maybe you should exclude it from your g-sensor app.
hope that helps...
regards jan
Update to MN7.3.2
I Have problems updating to 7.3.2.
Have copied the Software (7.3.1) to the HD in HDD-Mode and installed everything. Then Installed NavigonFresh on my PC and plugd in my HD in HDD-Mode. When I hit Update Navigon-Sofware I get the massage: "Ungültige Gerätedefinition" (=>Invalid Devicedefinition)
What am I doing wrong? Created an Account and everything. Do I Have to buy MN to Update?
MN7
What did I do wrong - Icopied the binaryconfig file as you said but when I launch MN7 still no display. Can you help?
HD switching off
Hi all,
Since I have installed navigon MN7, my HD does not switch off automatically anymore.. That's very bad for the battery. Any idea how to solve this problem?
Thanks !
See http://forum.xda-developers.com/showthread.php?t=446487&page=43 (hope this becomes a link), post #423. The hard reset may not be necessary; I did it because I wanted to clean the device of any unexpected effects which I was afraid would have been created by MN7 using the "wrong" xmls. Sorry I tried both on my PC (the installation program) and on my HTC HD (my trail version) but coud not find a menu option saying which version of MN7 I have!
Thank you hausen, it works perfectly on my Diamond2!
Hi all,
today i've bought a Navigon Mobile 7 for my HTC HD2, installed, updated via Freshstuff and till this morning my NM7 wouldnt start at all...i modified it with the files provided here (.xml) tried with soft and hard reset, uninstalled Copilot Live 8 (thought was a kind of conflict). The manual say:
- use 2 gb sd micro card to install the software..i've used 4 gb and 8gb...maybe is mandatory???
the program start and remain freezed fro few second (without any welcome screen, just the pda freezed...) then i checked in the task manager and i saw was in run using 2.49 mb of resources and i had to stop it few time...
now...any solution about? or i have to be again a bad guy and stop to buy software but just have to keep download cracked software?
Thank you all for the answers,
S. aka Dr. Dobermann...ANGRY...really ANGRY!
thanks
hausen said:
Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Click to expand...
Click to collapse
might actually work

[31.07.2009] TMC now working without external Hardware!!!

Hi,
Tmc work on Touch HD with a little tool (attached here).
TMC developers thread: http://forum.xda-developers.com/showthread.php?t=497977
beemers TMC thread: http://forum.xda-developers.com/showthread.php?t=512630
Load and install the two attached cab files, then:
start HyperGPS
select a free Com Port for TMC
go to menu > Test and search TMC with the arrows
message RTTMC in receive windows means TMC available (Pic 4)
if TMC found, close test windows with OK
leave HyperGPS in the background and start iGO
go to settings > TMC
search a TMC broadcaster
What is new in Beta 8:
-Full GNS protocol support. Tested under iGO and Navigon
GNS needs TMC+GPS option to be selected althought if it is not, HyperGPS will send fake GPS sentences.
-Less CPU consumption and lower memory footprint
-Optimized test program: Now RSSI is correctly shown under Royaltek mode, unused buttons are hidden under GNS mode and all the behaviour has been polished.
-RDS and TMC indicator in test program.
-Log mode redesigned to make more useful and readable logs.
-Removed fake RDS message under Royaltek mode. Not necessary with correct timmings.
-Soved an issue with block ratio not always sent.
my iGO settings in system.ini:
[tmc]
saved_config_available="0"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
saved_last_tuning_mode="0"
auto_tuning="0"
saved_last_frequency="1047"
YouTube - TMC and iGO
Special thanks to beemerTPPC and all TMC developers.
with friendly greet
starbase64
You guys are incredible, and xda-dev is an amazing forum!!!!!!!
When, even iGO responsibles of the support section strictly answer that the HD isn't able to provide a TMC function with its radio receiver, you still believe that it's possible, give yourselves the means to make it happen, and success!!!!
BRAVO!!!
...'ll test this soon
it doesnt work on my hd....
tested all the com ports but no way.... it says it cannot open com port....
I have installed both the files, any help ???
Mau
TMC found in iGo, but no TMC-stations can be found in Sweden so far...
Does this work in the UK with iGO8? Reason why i ask that TMC is found in iGO8 but no TMC stations found. I have the headset plugged in and it's scanned all FM radio frequencies (testing.... no TMC signal found). The funny thing is, on the main screen where the TMC icon is, i have a yellow envelope. Clicking the car icon, then the car icon in a triangle, it takes me to a section called "Traffic Alerts" where 2 events are listed for roadworks. (1. A3211 westminster bridge - tower bridge & 2. A23 thorton - heath purley). So it must have picked up a signal at some point. Any help please ?
starbase64,
thanks a lot. I just follow in last two weeks all efforts (thanks to flywhc and other team) to obtain TMC function avalaible on htc devices. In my case I have a touch HD. Now I just installed u sw, and config and TMC signal is OK. Now remain only to test on the road...
Thanks again. I hope to give u feedback asap.
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.
WOW! This is so good. HTC dvices always have hidden options. The only bad thing is missing tmc services in my coutry, macedonia
Griff1 said:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.
Click to expand...
Click to collapse
Same problem here, worked once, and then after softreset cannot open com port anymore.
I know,gutted or what.
I'm just pondering a hard reset,would rather not but i really want this working.
EDIT: I might wait a while till my next Dutty rom,will probably be soon,lol.
Griff1 said:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.
Click to expand...
Click to collapse
same here aswell using dutty`s v3.3XT
Gotta be realistic, while its nice to have, this is "only" OpenTMC, in Germany known to be around 20-40 minutes behind real traffic situation. This is not TMCPro with realtime traffic data through road sensors.
But indeed it is fantastic for the masterminds behind this activation to have achieved this. Respect.
OpenTMC around the world: http://en.wikipedia.org/wiki/Traffic_Message_Channel#TMC_services_in_operation
stokesie said:
same here aswell using dutty`s v3.3XT
Click to expand...
Click to collapse
Same here, using dutty's 3.3. I downloaded the setup files from here http://forum.xda-developers.com/showthread.php?p=3730090#post3730090 (page 35) and reinstalled and all working again.
Also, anyone know what frequency UK TMC is broadcast on?
works on htc diamond?
Originally Posted by Griff1 View Post:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission"
Same problem here, worked once, and then after softreset cannot open com port anymore.
IO ME MEDESIMO said:
works on htc diamond?
Click to expand...
Click to collapse
Yes, it does.
works nice with my blackstone and tmc is found here in NRW.
but
after close/restart it still works due to the driver is still loaded but as soon as its beeing unloaded for the first time I get the same error that driver cannot be loaded again - check COM port or install certs. even after softreset and reinstalling certs it doesnt work until i replace gfmapi.dll in \windows
usrname said:
it doesnt work until i replace gfmapi.dll in \windows
Click to expand...
Click to collapse
Thats what i'm finding too.
Does it work in netherlands
Have you read the messages in this thread? Hint: Post 12

[APP]SVMPowerMgr 2.0 - Yet another power comm. utility

Hello.
Firts of all sorry for my bad english.
I know that there is enough applications like this, but I've decided to write my own application, as a beginning for learn embeded C++ and mobile devices development. So, because this is my first app. in such domain, please don't punch me .
May be "power manager" sounds hard, this app. do exactly the same as per example psShotXP, namely:
- turn off the screen of Your device
- put the device in suspended mode
- soft reset the device
- turn off the device (HTC devs.).
- turn on/off wifi
- turn on/off phone module
- turn on/off bluetooth (make discoverable/invisible)
- switch phone bands Auto-2G-3G
You also can create 4 shortcuts to the program with parameters:
0 - turn off the screen of Your device
1 - put the device in suspended mode
2 - soft reset the device
3 - turn off the device.
4 - turn on/off phone module
5 - turn on/off wifi
6 - turn on/off bluetooth
You can change the images of backrounds button separator and buttons, they will be located in "Images" folder after install. With one restriction: now the buttons are black, so if you change the back of main program, consider this ...
Remarks: To close the main window you must tap anywhere outside the buttons or in space between buttons. Also to close additional windows tap the Close button or empty space of window.
P.S.
Discoverable/invisible mode for bluetooth is working on Microsoft stacks, on broadcom is to be developped (works just on/off bluetooth)
P.S. Supported screen resolutions: QVGA (240x320), Square (240x240), SquareQVGA (320x320), VGA(480x640), Square VGA (480x480), WVGA (480x800)
Regards.
Looks nice - good effort mate
Hi
Works fine on Touch Diamond 2. Thanks
I am myself a developer and I was looking for a way to shut down the device from a shortcut. With the keyword "PowerOffWarning" from you I finally found the solution.
s.virtan said:
Hello.
About "turn off". I've tested these only on my Touch HD, and i've used the functionality of this device owerOffWarning (when you long-press the power button). May be this will work on Diamond too, i do not have them...
Regards.
Click to expand...
Click to collapse
I might be a good idea to add an explanation on how to do this
Thanks for the software. One of the file name in shortcut folder seems mispelling "standbay" instead of "standby".
Bxsteez said:
I might be a good idea to add an explanation on how to do this
Click to expand...
Click to collapse
Hi there, just copy the createt Shortcut SV*.lnk from /Windows/Startmenu/etc... into /Windows and rename it into "Long_Power.lnk". And thats it. Simply but powerfull.
Greats Tom
Hmmm i didn't do that. I copied the program into the windows directory and changed the name to poweroffwarning.exe and i had to copy the images folder too
Cuts the cleartype font out using this
Bxsteez said:
I might be a good idea to add an explanation on how to do this
Click to expand...
Click to collapse
Hi.
By "PowerOffWarning" I want to say, that when You long-press the power button on device it seems that a program PowerOffWarning.exe (wich You can find in \wndows dri.) is launched, and You can see the message box "Power will be turned off ...".
This is not my discovery, this is a standard HTC feature ... and a found it here
http://forum.xda-developers.com/showthread.php?t=424235 (middle of page) ...
That's all
Wiggz said:
Looks nice - good effort mate
Click to expand...
Click to collapse
Appreciate, thanks
angler said:
Thanks for the software. One of the file name in shortcut folder seems mispelling "standbay" instead of "standby".
Click to expand...
Click to collapse
I'll replace, emotions perhaps , thanks ...
Bxsteez said:
Hmmm i didn't do that. I copied the program into the windows directory and changed the name to poweroffwarning.exe and i had to copy the images folder too
Click to expand...
Click to collapse
Sorry, but ... why you are doing this ... You don't need to copy the program into windows, You can do this of course, but ... I think there is no need for ...
And about PowerOffWarning, I repeat that this is a HTC program, not mine, and if in \win. dir is no such file, the renaming of SVMPowerMgr to PowerOff will not help.
Regards.
rjmjr69 said:
Cuts the cleartype font out using this
Click to expand...
Click to collapse
To all.
I'm terrible sorry !!!
Now the program does not change the clear type settings.
Resintall cab or just replace "exe" from zip file.
great program
this is really a great program.... working well on my qvga device!
I was looking for it for a long time! thank you!
francarl said:
this is really a great program.... working well on my qvga device!
I was looking for it for a long time! thank you!
Click to expand...
Click to collapse
You're wellcome. Thanks.
What is your device? It's an HTC ... Because I suppose that the "turn off" option will not work on other devices ...
Thanks.
Hi s. virtan
I've the following problem and i hope you can help me:
Your App is running great, but when i click on "turn off device" the screen stays on. For a half second the screen is black an returns to powermgr-menu.
Any idea what's the problem?
Ralfi.
Hi Virtan,
I have installed your software, but found the when I pressed and hold the power button for my Diamond 2, instead of showing the power off warning, your menu pop out. And if I uninstall your program, I cannot power off my device, because the program is looking for the SVM Power Mgr.exe.
Ralfi said:
Hi s. virtan
I've the following problem and i hope you can help me:
Your App is running great, but when i click on "turn off device" the screen stays on. For a half second the screen is black an returns to powermgr-menu.
Any idea what's the problem?
Ralfi.
Click to expand...
Click to collapse
Hi,
tell me please what is Your device ?
Low C H said:
Hi Virtan,
I have installed your software, but found the when I pressed and hold the power button for my Diamond 2, instead of showing the power off warning, your menu pop out. And if I uninstall your program, I cannot power off my device, because the program is looking for the SVM Power Mgr.exe.
Click to expand...
Click to collapse
Hi,
Did you proceed like in this post is mentioned ?
Cluster_ said:
Hi there, just copy the createt Shortcut SV*.lnk from /Windows/Startmenu/etc... into /Windows and rename it into "Long_Power.lnk". And thats it. Simply but powerfull.
Greats Tom
Click to expand...
Click to collapse
If yes, the You should remove[rename] the Long_Power.lnk from \windows dir.
Sound strange Your situation, because the cab does nothing else, than copy the Svm Power Mgr to the program files, and a shortcut to program in \windows\start menu\programs, that's all, there is no other locations ...
TG01 -
Been searching for this all weekend. Thanks
All seems to work on the Toshiba TG01, apart from power off, popup stating unsupported device.
MB
s.virtan said:
Hi,
Did you proceed like in this post is mentioned ?
If yes, the You should remove[rename] the Long_Power.lnk from \windows dir.
Sound strange Your situation, because the cab does nothing else, than copy the Svm Power Mgr to the program files, and a shortcut to program in \windows\start menu\programs, that's all, there is no other locations ...
Click to expand...
Click to collapse
Hi Virtan,
Thanks, after I deleted the Long_Power.Ink from \windows dir, hardware power button function go back to normal. I did not create the Long_Power.Ink in the first place.
Low C H said:
Hi Virtan,
Thanks, after I deleted the Long_Power.Ink from \windows dir, hardware power button function go back to normal. I did not create the Long_Power.Ink in the first place.
Click to expand...
Click to collapse
Hi.
Hmmmm, sound strange about this long_power.lnk ... finaly, it's OK that You can go back to device works as normaly
Regards.

[ROM WM6.5.5(23529)][WWE][02/2010]DsT 1.2.1 Based on BsB ROM

Hello to all .. I am a novice cook and I decided to post here my first ROM .. The ROM does not currently have a name and then I'll call with my nickname ..
However, it is based on the fantastic ROM Makeveral but is still far from perfect ..
Change Log
SOON
After first boot:
Total free storage: 104.30MB - available xxMB
Total free memory: 111.71MB - available 47.72MB
Old Version Here
http://forum.xda-developers.com/showpost.php?p=5713616&postcount=113
------------------------------------------------------------------------------------------
Thanks to the following:
Makeveral - for his fantastic ROM and programs
yozgatg - for the Kitchen
Evirus - for the Visual Kitchen
l3v5y - for the Kitchen
------------------------------------------------------------------------------------------
The ROM you can download it from here:
http://www.mediafire.com/?sharekey=274e30afaa3abeb20dec85adfe0a530acae9f75f773bc311a4648785df63f216
Here you can find a 1.13 and 1.17 radio version
http://www.mediafire.com/?sharekey=274e30afaa3abeb20dec85adfe0a530a47bb0c219a33e12ea4648785df63f216
------------------------------------------------------------------------------------------
Known bugs:
- For unlock screen tap at bottom of screen and slide..
- can not install any program for editing the registry
I hope it is appreciated this ROM ..
bye
Wow!! Great to see a New Chef...!!
Looks good...will give a try....Best of Luck!!!
great!
great, i will try it later. how about memory consumption? how much free ram after boot?
It has 40mb or so free after boot (compared to 47.5 on BsB). The brick game doesn't play. It starts and then bombs out leaving you with the device in landscape view but no easy way back. It locks the device automatically (even while you are using it) and dims the screen. I can't see any options to change this behaviour.
Opera started long enough to auto rotate the screen back, then bombed.
Youtube worked fine, Ramsweeper works. Teeter works. Album works. Media Player works. Calculator works. Internet Explorer bombs. Adobe LE reader works.
I can't see a way to adjust any backlight settings. It dims after about 10 seconds and always goes back to the lock screen.
I'll spend some time installing the advanced config tool and see if there's a way to disable the lock, otherwise it's back to good old BsB.
Thanks for the work in preparing the rom.
Littld Thank you for your bug report .. I put everything in place .. Thanks again ..
littld said:
I'll spend some time installing the advanced config tool and see if there's a way to disable the lock.
Click to expand...
Click to collapse
You can disable autoLock via Registry by changing the following key values
HKCU/ControlPanel/BackLight/AutoDeviceLockEnable
set 0 to Disable
set 1 to enable
hi
you rom would have more success if you mention that it's based on Makeveral's kitchen
I'll give it a try during the weekend
regards and thanx for your work
Upload in progress..
some problem with mediafire... sorry
try upload to 4shared..
is available at 4shared link the new version..
BsB Roms were the best!!!!
I'll keep trying this! but could you please fix the wallpaper cut in homepage (the image is cutted in upper and bottom bar)? These are the only Roms that have this bug...it's so ugly....
Thanx a lot!!!
Good job!!!
so far it's very nice
scrolling is a bit super fast especially in contact which makes it very hard to use !
I'll be testing for bugs now
Alright here are a few things i've noticed today
- memory usage is a little high (on 33 Mo free after a bit... opera displays memory warnings all the time) that's with HTC Menu disabled... maybe something could be done here
- GConfig doesn't work
- Scrolling in dropdown list isn't working properly. it scrolls the page behind or sometimes simply doesn't work with the finger
- scrolling is to fast in some apps (ie : contacts)
- pictures panel "all photos" could launch HTCAlbum instead of MS ****ty pictures & videos
- keyboard button is annoyingly bringing up the SIP selection menu when pressed (worked-around by disabling HTCSipSrv - tap to expand / double tap to fold... nice )
so far it's fast and stable and battery seems to be holding well
NICE !!!
wuub said:
Alright here are a few things i've noticed today
- memory usage is a little high (on 33 Mo free after a bit... opera displays memory warnings all the time) that's with HTC Menu disabled... maybe something could be done here
- GConfig doesn't work
- Scrolling in dropdown list isn't working properly. it scrolls the page behind or sometimes simply doesn't work with the finger
- scrolling is to fast in some apps (ie : contacts)
- pictures panel "all photos" could launch HTCAlbum instead of MS ****ty pictures & videos
- keyboard button is annoyingly bringing up the SIP selection menu when pressed (worked-around by disabling HTCSipSrv - tap to expand / double tap to fold... nice )
so far it's fast and stable and battery seems to be holding well
NICE !!!
Click to expand...
Click to collapse
Thanks a lot for bug report..
-I'm putting the memory attached to the xip to have more.
-g-config replaced with the new version that supports sdk4.0.
-new scroll to have less problems.
-now I have set 3 seconds to hold keybutt for bring up the SIP selection menu ..
I upload it when i go home..
why did you add zip? WinRAR can open zip and rar files? just update it to latest version and remove zip )))
for once i'll have to agree with jesus
rar is fine... no big need for zip ...
cool for the fast bug fixing!
I removed eNative position fix and nothing changed... why did you install it for ? (just curiosity )
battery's has gone down 4% in a 6 hours... which is fine by me...
i'm using a beta build of s2u2 so it might a battery "draining" issue (not sure yet)
I'll check with radio 1.17 if i get bored
little requests :
- in the email panel, do you think it's possible to change the right softkey so it sends and receives, instead of view (which you can access by taping on the panel)?
- the facebook upload from album isn't compatible with album 3.0 ? is there any way to include it without trouble ?
anyways this is truly the following of Mak's great work !
DenStereo I'm glad to say that your rom shall be my new base rom
Gracie Mile !!!
denstereo said:
Thanks a lot for bug report..
-I'm putting the memory attached to the xip to have more.
-g-config replaced with the new version that supports sdk4.0.
-new scroll to have less problems.
-now I have set 3 seconds to hold keybutt for bring up the SIP selection menu ..
I upload it when i go home..
Click to expand...
Click to collapse
as a makeverals roms user im waiting for that
wuub said:
for once i'll have to agree with jesus
rar is fine... no big need for zip ...
cool for the fast bug fixing!
I removed eNative position fix and nothing changed... why did you install it for ? (just curiosity )
battery's has gone down 4% in a 6 hours... which is fine by me...
i'm using a beta build of s2u2 so it might a battery "draining" issue (not sure yet)
I'll check with radio 1.17 if i get bored
little requests :
- in the email panel, do you think it's possible to change the right softkey so it sends and receives, instead of view (which you can access by taping on the panel)?
- the facebook upload from album isn't compatible with album 3.0 ? is there any way to include it without trouble ?
anyways this is truly the following of Mak's great work !
DenStereo I'm glad to say that your rom shall be my new base rom
Gracie Mile !!!
Click to expand...
Click to collapse
I installed native position and fix because if you want to install manila it is automatically placed in the right place ..
For the zip manager prefers over all the poket rar because it integrates seamlessly with file explorer ..
for your requirements see what I can do ..
denstereo said:
I installed native position and fix because if you want to install manila it is automatically placed in the right place ..
For the zip manager prefers over all the poket rar because it integrates seamlessly with file explorer ..
for your requirements see what I can do ..
Click to expand...
Click to collapse
thanx for that... i'll be wainting for your new build
no more bugs detected so far
denstereo said:
I installed native position and fix because if you want to install manila it is automatically placed in the right place ..
For the zip manager prefers over all the poket rar because it integrates seamlessly with file explorer ..
for your requirements see what I can do ..
Click to expand...
Click to collapse
thanx for that... i'll be waiting for your new build
no more bugs detected so far
I'll give it a try, but please bring back NoData in your next update it rocks! Looking good!

Categories

Resources