Related
Hi,
I have the following question. I currently have installed HardSPLv7 (so the device shows IPL-1.04 / SPL-2.20Olipro.
How exactly do I downgrade to my old IPL-1.00 / SPL-1.06 in case I have to hand-in my device for warranty reasons? I already searched through the forum and read that it can be done using sspl somehow but I couldn't find exact instructions.
Can anybody (maybe pof) give detailed instructions on how to downgrade to original ipl/spl from a .nbh with the correct ipl/spl files. I already prepared a .nbh with a spl-1.06 and the corresponding IPL extracted from an original vendor rom and put in my rebuilt dumped rom.
I also have the problem that I don't know where to get IPL-1.00, because on the page where to original roms are listed only the SPL version is noted, but not which ipl is in which rom. Can anybody tell me where I can get an IPL-1.00 .nb file?
Thanks for any help on this. I also think that maybe it could be interesting to put this onto the wiki if I anybody can answer this.
Thanks for any help.
check you PM
It's already pretty much in the Wiki, maybe a 'downgrade' link would be prudent.
Upgrading and cooking: -> MrVanx Hermes upgrade guides -> SPL Downgrade Guide
IPL-1.00 / SPL-1.06? Is this working
Hi,
I just read through the mr vanx downgrade guide and found out that there is a downgrade package with IPL-1.00 and IPL-1.04 and a second one with IPL-1.01 and IPL-1.06.
Now, I have the problem that my device was shipped with IPL-1.00 and SPL-1.06? Apparently this is a strange combination as this is not downloadable at the mr vanx downgrade guide, so my question is. Can I simply extract the IPL-1.00 from one .nbh and SPL-1.06 from the other and recombine them using rombaker, or would a downgrade to this combination screw up my device?
Thanks for letting me know.
I'm on the same boat, I need to downgrade my JasJam to send it in.
I haven't researched at all yet, i've been pretty busy. when I get off work i'll look into it and see if I run into the problem your facing and we can atempt to solve it together.
fone_fanatic said:
I'm on the same boat, I need to downgrade my JasJam to send it in.
I haven't researched at all yet, i've been pretty busy. when I get off work i'll look into it and see if I run into the problem your facing and we can atempt to solve it together.
Click to expand...
Click to collapse
Easiest thing to do is to download your original shipped ROM and extract the NBH file (using dutty's good nbh tool) and grab the IPL or SPL that you need and substitute that for the file from MrVanx. Just be careful what you flash - if you mix up the IPL and SPL file - InstaBrick! Trust me - I know
Do as ToddJG says, download the two files which i refer to in the guide.
Extract the IPLs and SPLs from the two files, mix and match.....BUT BE CAREFULL.......DONT FLASH UNLESS YOUR PREPARED TO DO IT.
ipl 1.00 and spl 1.06 will be fine.
make a single nbh from the mix and match combination then flash with customRUU.
What if i'm trying to flash the original shipped rom.. and i do the first step in your guide, then simply flash the shipped rom, or do i still have to extract the ipl and spl? (they're already extracted just wanting to know if its redundant if i recompile it with the rom i extracted them from.)
Ok, just succesfully downgraded to IPL-1.00 and SPL-1.06. Now i'm gonna flash back to an imate shipped WM5 rom. but one problem with that... clubimate.com is only showing the extroms which are around 6mb when downloaded.. where can i get the full imate rom?
also mrvanx what do u mean by this:
As with other downgrade guides this is NOT intended as a guide for claiming the warranty of the device having flashed components which are not authorised by the manufacturer or carrier.
Click to expand...
Click to collapse
?
fone_fanatic said:
Ok, just succesfully downgraded to IPL-1.00 and SPL-1.06. Now i'm gonna flash back to an imate shipped WM5 rom. but one problem with that... clubimate.com is only showing the extroms which are around 6mb when downloaded.. where can i get the full imate rom?
also mrvanx what do u mean by this:
Click to expand...
Click to collapse
It means that if you flashed unauthroized phone parts (like unofficial WM6 roms, radio upgrades and so on you have void your warranty). Of course if you can downgrade to your old rom nobody will notice that you did that.
But you have to be very careful on downgrading if you have also upgraded your radio I thinkk, cause you can brick your device (means having "NOGSM" after downgrading), see this note from mr. vanx downgrade guide for wm5:
NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error.
Click to expand...
Click to collapse
Maybe you should follow mr. vanx downgrade guide for wm5 to make sure your on the safe side.
I thought he meant that it is still noticeable if you downgrade the IPL and SPL that it would be detected during warranty repairs but thats not the case...
I emailed I-Mate and they gave me an RMA# and had me purchase the $60.00 Diagnostic package from PocketPcTechs.com(They handle imate warranties in the US). So i did that, they emailed me with a form i should fill out and include it with my device when i ship it...
Did that, they sent me an email when they recieved my device, 15min after that i recieved another email that they were working on my devic, then Early the next day i get an email saying repairs are complete and its being ready to get shipped back to me... 15min an email with a tracking number saying its shipped....
Everything worked so smoothly, warranty was accepted, hopefully everything will be good when i get the device back (which should be today) I want to get rid of this ****ty iphone so bad!
todd_jg said:
Easiest thing to do is to download your original shipped ROM and extract the NBH file (using dutty's good nbh tool) and grab the IPL or SPL that you need and substitute that for the file from MrVanx. Just be careful what you flash - if you mix up the IPL and SPL file - InstaBrick! Trust me - I know
Click to expand...
Click to collapse
MrVanx instruction working just fine, however do not put your Hermes into Bootloader Mode. I've been trying the steps with my hermes in BootLoader Mode for many many times and it does not work. Leave it on OS mode. (Today) screen before you run the CustomRUU. Hope this help
why is every one so paranoid about this....
has anyone EVER heard of a warranty being denied because of the software on it?
GldRush98 said:
why is every one so paranoid about this....
has anyone EVER heard of a warranty being denied because of the software on it?
Click to expand...
Click to collapse
Yup cingular/ att will charge you for out of warranty work if its a different rom
Please help
Guys I am having the same issue, I am exchanging my phone and need to downgrade. I followed MrVanx guide and downgraded to 1.10.olipro and now need to flash the original Cingular 8525 SPL back to the phone. The SPL that was shipped was 1.11. Where can I find the file to flash? I have been trying to find it with no luck. Could someone please help me out with this? Thank you very much!
thedude0420 said:
Guys I am having the same issue, I am exchanging my phone and need to downgrade. I followed MrVanx guide and downgraded to 1.10.olipro and now need to flash the original Cingular 8525 SPL back to the phone. The SPL that was shipped was 1.11. Where can I find the file to flash? I have been trying to find it with no luck. Could someone please help me out with this? Thank you very much!
Click to expand...
Click to collapse
Go to the wiki > hermes > original shipped wm5 roms and then decompile the rom with duttys good nbh tool. You will see an spl.nb file. Make that alone into an nbh file using duttys good nbh tool. Then flash to your hermes using the custom ruu.
Since you have successfully followed mrv's guide, you should probably know what all those things are.
todd_jg said:
Go to the wiki > hermes > original shipped wm5 roms and then decompile the rom with duttys good nbh tool. You will see an spl.nb file. Make that alone into an nbh file using duttys good nbh tool. Then flash to your hermes using the custom ruu.
Since you have successfully followed mrv's guide, you should probably know what all those things are.
Click to expand...
Click to collapse
Man thank you so much for the fast reply! Having downgraded to 1.10.olipro and downloading the original rom exe, when I ran it (accidentally) it flashed the 1.11 SPL back to the phone for me. I didn't even have to use duttys tool. THANKS AGAIN!
thedude0420 said:
Man thank you so much for the fast reply! Having downgraded to 1.10.olipro and downloading the original rom exe, when I ran it (accidentally) it flashed the 1.11 SPL back to the phone for me. I didn't even have to use duttys tool. THANKS AGAIN!
Click to expand...
Click to collapse
No problem. I thought you already had the rom you wanted, but just needed to change the spl. Guess I gave the overly complex solution!
marcelser said:
Hi,
I have the following question. I currently have installed HardSPLv7 (so the device shows IPL-1.04 / SPL-2.20Olipro.
How exactly do I downgrade to my old IPL-1.00 / SPL-1.06 in case I have to hand-in my device for warranty reasons? I already searched through the forum and read that it can be done using sspl somehow but I couldn't find exact instructions.
Can anybody (maybe pof) give detailed instructions on how to downgrade to original ipl/spl from a .nbh with the correct ipl/spl files. I already prepared a .nbh with a spl-1.06 and the corresponding IPL extracted from an original vendor rom and put in my rebuilt dumped rom.
I also have the problem that I don't know where to get IPL-1.00, because on the page where to original roms are listed only the SPL version is noted, but not which ipl is in which rom. Can anybody tell me where I can get an IPL-1.00 .nb file?
Thanks for any help on this. I also think that maybe it could be interesting to put this onto the wiki if I anybody can answer this.
Thanks for any help.
Click to expand...
Click to collapse
Hey, maybe i come to late,
I had the same "problem", I had the Screen Aligment Issue. And I really wonderd myself if o2 have problem with my "Schaps ROM Version HardSPL" BUT there was no problem, they solved my Screen Aligment Issue. Afterwards I asked, what actually is bad for warrenty. Upgrading the Bootloader is no problem. But CID (Costumer ID) unlocking will may be evil. Anyway's for myself (the SA-Issue) was a hardware issue which has nothing todo with software facts like upgrading the bootloader...
dont be worried... i guess there will be no prob...
Ok, talk about it here.
It just installed over my Olipro SPL and before I knew it, it said INVALID VENDOR ID.
Now I can't update to WM6 because of my SPL that is CID locked. I am however able to install an original ROM.
Questions (yet to be answered):
1) Is it possible to run SSPL?
2) Are we able to get Hard-SPL on it again.
If not;
3) Are we able to write a new SSPL that can hack this bootloader.
I don't even know whether it is locked, but I assume they did find out about our SSPL and Hard-SPL.
well i just flashed back to pdaviet's rom from the new WM6 (nothing very impressive about it). I just let the updater push sspl to my phone and it worked. haven't tried loading hard-spl yet.
After flashing to an original rom were you then able to update to WM6?
OK, When I got back in to WM5 i was able to get into SSPL again. It shows SPL-1.07.ds
But we will have to make sure we can rewrite it. I can't test it now, have to go to work. I will check it this afternoon.
OK, i think essentially what this new IPL/SPL does it overwrite your existing, restore any CID locks and vendor ID's as well.
If you have a Dopod branded device from the areas this release is for, you'll have no issues.
I was able to easily update using this rom, then run Olipro's hard SPL after to return to 1.20 Hard SPL
if you unpack D810_SEA_WM6_Upgrade_20070709.exe or RUU_Trinity_DOPODASIA_WWE_3.00.707.16_6275_1.46.30.11_108_Ship.exe with winrar you will see a SPL.nhb file that is the one thats being installed just delete it
TheBlackDragon said:
if you unpack D810_SEA_WM6_Upgrade_20070709.exe or RUU_Trinity_DOPODASIA_WWE_3.00.707.16_6275_1.46.30.11_108_Ship.exe with winrar you will see a SPL.nhb file that is the one thats being installed just delete it
Click to expand...
Click to collapse
already tried it, same stupid problem won't pass through 28%
TheBlackDragon said:
if you unpack D810_SEA_WM6_Upgrade_20070709.exe or RUU_Trinity_DOPODASIA_WWE_3.00.707.16_6275_1.46.30.11_108_Ship.exe with winrar you will see a SPL.nhb file that is the one thats being installed just delete it
Click to expand...
Click to collapse
did that but still same problem with 28%
have you flashed your bootloader back to a hard-spl or kept de original one
TheBlackDragon said:
have you flashed your bootloader back to a hard-spl or kept de original one
Click to expand...
Click to collapse
Tried it with hard-spl and sspl both gave the same result; stuck at 28%
even with "Des SSPL"
Me,too stuck at 28%
if you're putting a new post about getting stuck in the upgrade process (most ppl at 28%), can you please list the steps you took, what bootloader you were using (hard-spl, etc), and what your bootloader shows now...
solved
click here http://forum.xda-developers.com/showpost.php?p=1358479&postcount=132
Works For me
Nice, it worked for me
Still stuck at 28% even after using the CID unlocker
RayEarth said:
Still stuck at 28% even after using the CID unlocker
Click to expand...
Click to collapse
You need SuperCid and SSPL. sorry my engish.
I had the same issue stuck at 28% - I fell back to the last V5 WWE rom and run SSPL (latest Trin) before update to V6 again.
ethos said:
I had the same issue stuck at 28% - I fell back to the last V5 WWE rom and run SSPL (latest Trin) before update to V6 again.
Click to expand...
Click to collapse
You need NEW supercid. Я сам с этими проблемами столкнулся. i dont know this for english.
I had OliPro SPl befor upgrading and have upgraded without any problem. Just run RUU and followed instructions.
I have an idea.
1. RUU flashed SPL 3.03 (so at that moment my phone became cid locked)
2.Probably my phone have the same cid as that ANZ rom. That's why i had no problems.
So all your problems are in new SPL and new logic for flashing device.
for flash new rom you should
1. unpack nbh file
2. use nbhgen to create new nbh with OS/RADIO/EXTROM/IPL only. WITHOUT SPL
3. use SSPL or hardSPL for flash this new nbh
4. enjoy
AT&T(aka deathstart) will be releasing their latest WM6 in a few weeks(I am suspecting but don't know anything for sure). My problem is that I have loaded Hard SPL v7 -> OliPro 2.10. I am wanting to remove my custom ROM and install "the" factory ROM. But I can't do this with Oli installed.
So how to remove so I can return my phone back to the factory ROM. I am wanting to sell before it loses the rest of its value as well.
Found numerous links to install but can't find anything to uninstall.
Any info/advice will be much appreciated.
--Mickey
Down Grading WM6 to WM5
This topic is "well covered" in Mr. Vanx's guide....... do a google search on "mr vanx" go the the site & look around...... I've done it successfully a number of times...... downgrading SPL7 is "one of the steps"......
Good Luck,
vpu2....OUT!!!!!
This was the site that I used to walk me through the install. Unfortunately I have been all through this site and haven't been able to find "downgrading" documentation. Didn't see a search button. Lots of good info though.
--Mickey
Downgrade SPL guide
Downgrade guide
cmalberto said:
AT&T(aka deathstart) will be releasing their latest WM6 in a few weeks(I am suspecting but don't know anything for sure). My problem is that I have loaded Hard SPL v7 -> OliPro 2.10. I am wanting to remove my custom ROM and install "the" factory ROM. But I can't do this with Oli installed.
So how to remove so I can return my phone back to the factory ROM. I am wanting to sell before it loses the rest of its value as well.
Found numerous links to install but can't find anything to uninstall.
Any info/advice will be much appreciated.
--Mickey
Click to expand...
Click to collapse
Are you sure that original retail ROM cannot be flashed if you have OliPro 2.10? Before you flashed custom ROM on your "virgin" device, you had to install Olipro 2.10, right? Then you flashed the custom ROM. So the reverse procedure should work as well. Correct me if I'm wrong.
juzzie said:
Are you sure that original retail ROM cannot be flashed if you have OliPro 2.10? Before you flashed custom ROM on your "virgin" device, you had to install Olipro 2.10, right? Then you flashed the custom ROM. So the reverse procedure should work as well. Correct me if I'm wrong.
Click to expand...
Click to collapse
I think this was the right question to ask. I have not had RUU install problems before..but just to make sure, I tried to run RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship to put my phone back to the "current" Cingy version(prep for WM6 by Cingy). So when I ran the RUU ran and I got to the point where the software was attempting to check out the info on the PDA. I got the 206 connection error. I tried to follow the troubleshooting of the readme.doc. It basically said to check your connections, reboot your computer, PDA, etc...I know the USB connection works as it connects to my Vista WMDC just fine.
So, just now as a last resort, I booted to the Bootloader screen and reconnected. Vista recognized and loaded a "new" driver(why I don't know). I ran the RUU and guess what??...ROM is now loading. All appears well and no need to downgrade the SPL.
This is probably a documented feature of RUUing w/in Vista somewhere. If not, then perhaps it can be added to some Upgrading Wiki.
Thanks for everything.
--Mickey
So I wouldn't have to break down the exe into the nbh files and do it all separately like in Mr.Vanx's guide? That would be awesome if I could just flash the original exe file, and then just downgrade the IPL.
Iv'e flashed the ATT ROM on the HardSPL with zero issues. Dozens of times.
I Have Got An Orange Uk Diamond And Have Been Trying To Upgrade From Rom 1.37.405.1 Wwe To 1.93..... But Was Unsuccesfull. I Have Got Few Questions.
1. Is It Possible To To Do It(1.73 Rom To 1.93)
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
I Maybe Asking For Too Much Here.
And Sorry Guys For The Newbie Questions. As It Might Have Already Been Answered A Million Times. I Just Couldnt Find Them.
Thanks In Advance.
When You Type In All Caps It Makes Your Words Normalised But Every Word Has A Capital Letter
Just In Case You Wanted To See Who The Idiots Were
yuv said:
I Have Got An Orange Uk Diamond And Have Been Trying To Upgrade From Rom 1.37.405.1 Wwe To 1.93..... But Was Unsuccesfull. I Have Got Few Questions.
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.
I Maybe Asking For Too Much Here.
And Sorry Guys For The Newbie Questions. As It Might Have Already Been Answered A Million Times. I Just Couldnt Find Them.
Thanks In Advance.
Click to expand...
Click to collapse
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.
Since you're not giving any details I don't know what your exact issue is. It depends on your Phone and where you got it.
Most likely your issue can be resolved by reading the thread which I link to in my signature.
daleski75 said:
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.
Click to expand...
Click to collapse
If you HardSPL you wont be able to install a standard HTC ROM without some faffing, I had this problem this week, so if your 1.93 is the released Standard OEM HTC one then dont HardSPL whatever you do.
thanks alot guys. what a quick response. and sorry for the caps lock if it got u confused.
as far as the details of the phone is concerened. its an orange UK contract phone with the ROM version 1.37.405.1 WWE radio 1.00.25.03. the phone hasnt been flashed at all. i did try to flash it to _QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe but was unable to. i guess i should have hard spl it before.
i m guessing the only thing i need to do is to hard spl it right. or do i need to do something else as well.
again thanks alot guys for the quick responses.
hi tony.
i have actually tried to do it without hard spl but it would get stuck on 1%. is there any other way to do it. i believe the ROM i m trying to flash to is an official one as far as the thread i downloaded it from is concerend.
one thing to clear here. its the first time i m trying to flash from 1.37 to 1.93 official rom. could someone confirm that there is a 1.93... official rom available or is it one of the cooked ones. and could one confirm as well that i need to hard spl even flashing from oficial to official rom. coz two post before tony mentioned not to hard spl.
any ideas guys. thanks
Here's what I've just done, I hope it helps -
Vodafone UK to UK release HTC ROM.
1. I read the info here, over and over and asked lots of questions.
2. I checked the current SPL of my fone (Volume Down & Reset) and found I had 1.37.
3. Downloaded Hard SPL 1.37 UnSigned and installed it - Here was my first problem. Everyone just says use RUU to install hard SPL however the SPL's I downloaded didn't come with RUU so I took a guess and decided that RUU was a generic flasher which could also flash the SPL for me.
4. Use RUU to flash the SPL, mine reported V1.0 as the new ROM version but installed and rebooted perfectly to reveal the coloured screen informng that I did now have a Cooked SPL installed.
5. Followed the fisrt startup procedure that the phone asked me to do.
6. Flashed the new ROM in a similar way to flashing the Hard SPL.
7. Phone flashed ok and I'm just in the process of setting it up now.
One issue I did have was using Vista I had to right click and run as Administrator to make it work.
tonyb15re said:
If you HardSPL you wont be able to install a standard HTC ROM without some faffing, I had this problem this week, so if your 1.93 is the released Standard OEM HTC one then dont HardSPL whatever you do.
Click to expand...
Click to collapse
wrong. if you use unsigned hardspl (aka "developer hardspl") it will flash HTC ROMs just fine
1.93 is also unsigned.
vrstu said:
3. Downloaded Hard SPL 1.37 UnSigned and installed it - Here was my first problem. Everyone just says use RUU to install hard SPL however the SPL's I downloaded didn't come with RUU so I took a guess and decided that RUU was a generic flasher which could also flash the SPL for me.
Click to expand...
Click to collapse
who's "everyone"? this information is totally wrong, wrong, wrong.
next time you download an attachment from a post, read the post where the attachment was, and you won't have this problem (the post that had the unsigned hardspl 1.37 also talked about where to get the special SSPL RUU for it - have a guess. it is in the same post in another attachment).
Thread has been closed due to maintenance of the forum. If you want it reopened, PM a MODERATOR!
Hi,
My Diamond has no response on the screen, so I think I need to return to factory for repairing. However I have difficulties in falling back to stock ROM and SPL.
From the Wiki:
---------------
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
...
-----------------
I can't flash my ROM to latest HK WWE CSL ROM (2.03) as it just stopped at 0%. I'm using SPL-1.30.OliNex.
Questions:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
1) Should I flash to v1.93 (the very beginning of the ROM)?
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
3) Anyone can give me a reference on the step-by-step in details...
Thanks!
Please help...
F810
Questions:
f810 said:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
Click to expand...
Click to collapse
If the latest was the offical from the site then you could use that - as you are having issues flashing this with 1.30 HSPL, I would suggest updating that to 1.40
f810 said:
1) Should I flash to v1.93 (the very beginning of the ROM)?
Click to expand...
Click to collapse
This might be a easier option and should work woth the 1.30 HSPL
f810 said:
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
Click to expand...
Click to collapse
This is recommended
f810 said:
3) Anyone can give me a reference on the step-by-step in details...
Click to expand...
Click to collapse
Its really straight forward like the WiKi suggests
This Thread may help
Thanks a lot.
Re Q3, so do you mean if I extracted the stock NBH, it's only OS but not including RADIO? If so, I will get the RADIO from wiki page later. Would you please clarify for me?
After your information, I think the steps in Wiki are clear. Thanks.
If this is HK ROM is the one you have downloaded from HTC PAGE then it has a radio included
Since my Diamond is totally malfunction in the touch screen, I can't response to all the confirmation & prompts...
I've failed to install Stock ROM and tried your recommendation on upgrading to HSPL 1.40. There was a confirmation on running the program in my Diamond and I can't press YES and now my diamond is just like bricked.
I've also tried pressing VOL DOWN + Reset to connect the Diamond via USB. The ROM Update Utility has "successfully" update the HSPL, but actually when I hard reset it and found it's still running 1.30... Can I just use this approach to fallback to Factory status??
Anyone has good idea on how to fallback to Factory Stock ROM, RADIO and SPL, provided that my screen has totally no response to me?
PLEASE...PLEASE...PLEASE help.
You will not be able to update olipros Hard SPL in bootloader mode as the SPL is protected and the 1.30 will prevent this although show its been done.
What you will need to do then is just load a 1.93 ROM from boot loader. the were some in that link i posted earlier. as to reverting to the default SPL - you may be luck not to need the screen for any confirmation. but running a new SPL to overwrite Oli's you will need to use windows and the RRU
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
band27 said:
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
Click to expand...
Click to collapse
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Here you go....I did a search
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Read this............Scroll to Post #39
http://forum.xda-developers.com/showthread.php?t=400950&page=4
band27 said:
Here you go....I did a search
Click to expand...
Click to collapse
I also got that but it's not win32 program... I believe it's running on the Diamond. But I've hard reset, and never able to setup as it's screen was not functioning now...
kawatsu said:
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Click to expand...
Click to collapse
That ROM had a different boot image - so you need to replace that by flashing another splash .NBH file using RUU.
Original splash can be found HERE
and if needed CUSTOM RUU HERE
Just un-zip these and put the splash file in the same folder as the Custom RUU and run the RUU - the flash should take a few seconds and viola - bye bye Diamond project splash.
f810 said:
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Click to expand...
Click to collapse
I think as long as the SPL is changed and the ROM is of the original language the I think it should be OK to send back like that
f810 said:
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Click to expand...
Click to collapse
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Which is the original SPL?? 1.23, 1.34 or 1.37? I do recall taking a picture of the original SPL when i 1st got the Diamond for days like that but i just can't find it now
I'm bought it from Malaysia. Anybody can help me confirm this??
R3PUBL1K said:
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Click to expand...
Click to collapse
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
f810 said:
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
Click to expand...
Click to collapse
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
f810 said:
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
Click to expand...
Click to collapse
Can anyone help??