Related
Is it just me or is there no sound when you click the Start button on the Dopod WM6 ROM. I was just used to it in WM5. Have I done something wrong ?
jefalijas said:
Is it just me or is there no sound when you click the Start button on the Dopod WM6 ROM. I was just used to it in WM5. Have I done something wrong ?
Click to expand...
Click to collapse
is sound activ?
Fro sammy_deluxe
hello,
Use this fix i found it on this forum and after all are ok.
Private69.
@+++
Yes, I can force sound for each 'Screen taps' under Start > Settings > Sounds & Notifications. But I do not want sound for each screen tap. I am completely lost on this one. Does anyone else get sound when clicking on Start ? Is it the ROM or is it just me ?
For jefalijas
Hello,
I post the correctif cab :Fix_WM6_Sounds.CAB
Enjoy.
Private69.
@+++
Thanks, work perfect now
Nice, I like this better than the original WM5 sound on the Treo.
private69 said:
hello,
Use this fix i found it on this forum and after all are ok.
Private69.
@+++
Click to expand...
Click to collapse
I used this cab, but it didn't work for me. Now I want to uninstall it, but it does not sow up in Uninstall programs. Which files should i delete to uninstall this?
Thanks!
How to uninstall it.
This cab file messed the icons on my start menu and ilauncher completely. Please post which Registry values does it change, so I could disable it if I need to. I cant find a way to uninstall it. If there is a way, please post it.
anyone ever figure out exactly what the registry edit was that this was doing?
bump anyone?
Yeah, I used this on my HTC Touch Cruise, and now I'm stuck with the menu sounds -- which are fine, but I realised on hearing them constantly why they were disabled.
I've poked around the registry, but I can't find an obvious place to change this back. So if anyone can tell me how to undo this hack, I'd be most grateful.
Thanks!
How To install
Could you please advice how to install this cab on my device? I have never installed this kind of a solution so please do advice
smittyofdhs said:
If you want to remove this cab from your phone, in the registry, go to HKLM\Snd\Event.Scheme\.AllSounds and remove menusel and menupop from that key. soft reset, done with menu noise.
Click to expand...
Click to collapse
http://www.4winmobile.com/forums/hermes-black-rom-support/11594-phone-pad-vibrate-how-remove.html
Hi!
I've been searching this (excellent!) forum for these files with not Much luck.
I've come across a comm manager called mun_rus comm manager and I've tried phone dialpad-international and the zombienexus one.
The comm manager, I can't install because I get an error message saying I don't have the access rights to do so.
The dialpad-international installation doesn't seem to change anything on my phone, because everything stays the same once installed.
The zombienexus does change the phone dialpad to the layout I want, but does not use the blue/green smartdialling color scheme I've seen on some cooked roms and would like to have. Also, the dialpad used for startup pin request is not replaced by the zombienexus installation, which means I end up with a green and a black dialpad...
Please can anybody point me to the correct cabs, or files to overwrite on my phone to get those two things to work the way I like?
I'm using the AUS WM6 no SPL found in this forum.
Thanks !
FoRmaTiTo said:
Hi!
I've been searching this (excellent!) forum for these files with not Much luck.
I've come across a comm manager called mun_rus comm manager and I've tried phone dialpad-international and the zombienexus one.
The comm manager, I can't install because I get an error message saying I don't have the access rights to do so.
The dialpad-international installation doesn't seem to change anything on my phone, because everything stays the same once installed.
The zombienexus does change the phone dialpad to the layout I want, but does not use the blue/green smartdialling color scheme I've seen on some cooked roms and would like to have. Also, the dialpad used for startup pin request is not replaced by the zombienexus installation, which means I end up with a green and a black dialpad...
Please can anybody point me to the correct cabs, or files to overwrite on my phone to get those two things to work the way I like?
I'm using the AUS WM6 no SPL found in this forum.
Thanks !
Click to expand...
Click to collapse
Try This, it works on my 838Pro ...
Hi,
thanks a lot for this file. I get the same error message trying to install this one as with mun_rus one...
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
Any ideas what I could do?
Thanks!
FoRmaTiTo said:
I'm using the AUS WM6 no SPL found in this forum.
Click to expand...
Click to collapse
Maybe your ROM is lokked by default. So try a cooked version from this forum and it just works.
I've installed it on SEA version thanks for share.
I was able to install the comm manager hkkk888 posted. Thank you! I had to stop the comm manager trough task manager first.
Thanks again!
Now I'm only missing the dialpad(s) and I'll be a happy man...
Can anyone do a screen capture to show how this Comm Manager skin look like?
I would like to change the one on my Trinity WM6 too. Also, if anyone can show me a dialpad with video call button will be great.
look like this
http://www.mobile-review.com/pda/review/image/htc/elf/screens-official/scr05.png
The comm manager posted before dissapears after a soft reset and leaves me with a blue colored one...
The one I am posting stays after soft reset. Not sure, but the font on it looks more blurry...
DIAL
Dial Sceen?
ROM cookers/Devs
I understand from other threads that the issue with the dial pad is that the kaiser has 3g codecs that differ from the trinity/other htc devices, which means the 3g video call button on this dial pad does not work.
My question to you guys is; how easy/hard would it be to change the dial pad so that the action/function call behind the 3g video call button doesn't call the 3g codec/action we don't have but calls the video call function that we know we can use...?
Regards,
different dialpad from wm5?
If wm5 dialpad should work on wm6 you can try one from Hermes, works for me in wm5.
using Official WM6 SEA version, having same problem.
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
However, fixed and successfully installed by stopping Comm Manager reside in memory first
hopefully this can help all
ztuzz said:
using Official WM6 SEA version, having same problem.
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
However, fixed and successfully installed by stopping Comm Manager reside in memory first
hopefully this can help all
Click to expand...
Click to collapse
Guys, Whoever face this problem, just restart your device and do not start any program before installing this comm manager. The reason you get this error because, your existing comm manager is running and this file cant overwrite the running file.
hkkk888 said:
Try This, it works on my 838Pro ...
Click to expand...
Click to collapse
The WLAN keys are different for 838 pro and Trinity and so for other HTC devices. The Comm Manager for Hermes will definitely NOT work for Trinity (For WLAN and Data Connection)
I don´t know about data connection, but the WLAN button DOES turn the Wifi function on and off on my device.
Still looking for the dialpad
The AUSDIM "modified official rom" does have the dialpad/comm manager I want... I´ve sent him a P.M. asking if he could share them but no luck yet...
Maybe he can/will post them...
Thanks!
There you go...
Addario, that´s the Zombienexus dialler isn´t it? I´m looking for that design but with other colors for the autocompletion window.´The Ausdim Rom has a dialpad with green/blue colored contact list window. If you open the last file in the cab, you see what looks like color codes... Any ideas if this is correct or how to edit these correctly?
Also after reading trough this and other forums it seems that it is not possible to just change the dialpad where you enter the PIN-code, without flashing another rom... Seems a bit odd...
FoRmaTiTo said:
Addario, that´s the Zombienexus dialler isn´t it? I´m looking for that design but with other colors for the autocompletion window.´The Ausdim Rom has a dialpad with green/blue colored contact list window. If you open the last file in the cab, you see what looks like color codes... Any ideas if this is correct or how to edit these correctly?
Also after reading trough this and other forums it seems that it is not possible to just change the dialpad where you enter the PIN-code, without flashing another rom... Seems a bit odd...
Click to expand...
Click to collapse
Wrong. Here is a nice black dialpad - finger operable - I believe it ma be the one in AUSDIM's ROM - but it has no Video Call support - the only downside. It does update the pinpad entry, too. It says Wizard - but I have it installed on my trinity - works fine.
nealed, thanks. It's great, more finger friendly than other dialpads.
hello everyone!
im using schaps version 4.30 right now. having low sound problem. from my understanding theres a forum tells you how to raise the sound up louder from registry editor but i forgot where. so please can someone help me.
Thanks!
are you having the same problem as me?
my problems are posted here
hope some of my suggestions can help yours
Low phone volume when using Schap's roms
I had the same problem when I use any of Schap's roms. I solved it by changing Schap's roms before flashing it.
Things I change:
1. Changed the attributes of all SetAcoustic*.* files so that these files are no longer hidden.
2. Added the command to config.txt (or preconfig.txt, depending on what rom of Schap your using) to launch SetAcoustic at initial startup.
As a result the SetAcoustic programs runs for a long time (at least for more then a minute) changing a lot of volume settings. From then on I'm able to raise the volume of my phone when I'm in a call to a level that even people close to me can hear what the caller says without using the speakerphone.
Kind regards,
Jos.
After reading yoru post, i've been trying to do what you did, but i have no idea how to extract nb files.
Could you post the step by step instructions on how to alter Schap's roms? would love to try and see if that fixes my long term problem
Low Sound Problem - Solved
List everything you need to do to change a ROM to include SetAcousticParam is to much work.
Instead I've uploaded the modified rom of Schap's WWE 4.30.
You can find it here.
Have fun.
Kind regards,
Jos.
I just poweroff my Jasjam for few minutes and poweron after. then I must raise the volume of my phone.
jgeerts said:
List everything you need to do to change a ROM to include SetAcousticParam is to much work.
Instead I've uploaded the modified rom of Schap's WWE 4.30.
You can find it here.
Have fun.
Kind regards,
Jos.
Click to expand...
Click to collapse
File is temporarily unavailable.... but thnxs anyway...
I've been reading an gathering information for weeks now to build my own personal ROM. Since I'm unable (at the moment) to build one from scratch
Somehow it doesn't seem to work for me and I could not find an answer to my problems. I really hope some ROM Guru is willingly to help me out here.
I've used the Diamond Kitchen to extract the NBH files. And like it should it creates the OEM and SYS folders when you don't use protected ROM's like Dutty's, Swtos or Bepe's.
I've tried multiple ROM's to rebuild for my personal needs. And here are the most common problems I've encountered:
- Diamond (or Raphael) Volume Control does work. Even when it's included correct in the ROM. Reinstalling Volume Control after flasing using a CAB does work strange enough.
- The sound settings panel won't close after changing sounds.
ROM's I've tried to personalize:
- Panosha
- TOR (SubZero)
- SwiftBL
- VIC Lite
- And probably a few other ROM's I managed to extract (using the kitchen).
I've read some threads about the same problems but they seem to be part of a ROM thread instead of a specific "cooking thread". That's why I started it here.
Do you experience the same problems or do you have some good ideas than please let the rest of us know
I have the same problem
Everything seems OK, except the damned sound configuration.
If someone has an answer, we would appreciate it very much.
Thanks in advance...
Thanks for you reaction. Concerning the Volume Control, there is a way to get this to work. Just add a CAB that you call using the config.txt.
It's not ideal but it should work.
Unfortunately this procedure can't be repeated for the sound setting panel
I played with it a lot and even if I do nothing with the ROM, this sound config problem occurs. I extract the ROM and then rebuild it without modifying anything. This looks like a kitchen problem I thought.
I use Surface Kitchen v1.01. You another one, so this is a little confusing
Edit:
Maybe we can do the same without using those settings but direct in the registry?
Someone knows those keys?
Been using Kitchen 1.0.1 for a couple of days now as well. Updated the programs that were out of date. Did not help.
I also get always this error, could it be the cause?
iXiR said:
I also get always this error, could it be the cause?
Click to expand...
Click to collapse
HI iXiR
I also get the same error every time. I can not even cook the packages made with package creator. Some times I succeed but at the end it saye User.hv / custom.hv not found. Any idea?
thanks
tararura said:
HI iXiR
I also get the same error every time. I can not even cook the packages made with package creator. Some times I succeed but at the end it saye User.hv / custom.hv not found. Any idea?
thanks
Click to expand...
Click to collapse
Well, most of the times this fault is there, its a mistake with your new or edited rgu file like \\ or forgotten empty last row.
regards
Anja31
I recommend you guys try cooking the 1.93 official ROM .., i cooked a personal one for me .. no problems at all
iXiR said:
I also get always this error, could it be the cause?
Click to expand...
Click to collapse
this error is because you also have xip directory already listed in ur kitchen, so when the operation reaches that part of extracting the xip it dumps the xip and .dsm a.rgus, so basically a duplicate I dont use this kitchen but you can always press y to overite all
- The sound settings panel won't close after changing sounds.
Click to expand...
Click to collapse
Try adding this one to your registery:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\LSOMACORE]
"Dll"="LsOmaCore.dll"
"Prefix"="DRM"
"Index"=dword:00000001
reset and you will be able to change the ringtone/press ok on your sound settings
To make it work while cooking, just place this in a RGU file so it will be implemented in the ROM
Thanks will try that one as soon as I can.
Had one crazy thought. Since there are some replies from some real cookers here I was wondering about the next thing.
At the moment I always select option "1" in my kitchen. So I don't rebuild it (option "2"). It shouldn't but is it possible to have more success when using option "2"?
I tried all variants....
select 1 (yes) -> Access denied
select 2 (no) -> the message will appear for a lot of files... even when you always select 2 the ringtone panel won´t work
select 3 (all) -> access denied
So IMO it has no impact, which option you take...
I choose "1". I just want to cook the ROM.
Ah.. now I understand what you mean... the question at the beginning...
of course you have to select "1"...
I talked about the overwriting question (screenshots in post before)
First of all: thanks for this thread...I was going crazy with this issue..!
Has anyone tryied the reg.key posted before?
PS: @maccune...did you tryied to recook swiftbl?! How?! Is it not a protected rom??
Might be wrong about SwiftBL. Tried so many that I could be mixing them up
Tried so many because I hoped there would be one that would work just fine.
If it was up to me I'd use TOR v5 since it's basic and still a Diamond build.
Also the cooker told he didn't mind if people would use his ROM as a base ROM for your kitchen
duttythroy said:
this error is because you also have xip directory already listed in ur kitchen, so when the operation reaches that part of extracting the xip it dumps the xip and .dsm a.rgus, so basically a duplicate I dont use this kitchen but you can always press y to overite all
Click to expand...
Click to collapse
Hi dutty, what do you use to cook and protect your rom ? a made home version ?
Sorry, wrong thread...
Caspertje19 said:
Try adding this one to your registery:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\LSOMACORE]
"Dll"="LsOmaCore.dll"
"Prefix"="DRM"
"Index"=dword:00000001
reset and you will be able to change the ringtone/press ok on your sound settings
To make it work while cooking, just place this in a RGU file so it will be implemented in the ROM
Click to expand...
Click to collapse
Wohoooooooo!
It works... really great... perfect...
I also was going crazy to this issue....
now its solved.....
thx a lot.....
BUT: Another question: How can I add this as RGU File to ROM?
i have built wm6.5 21189 wwe rom for ASUS P527. but i am facing the following problems:
i> Cant read, write sms, email. nothing appears except an 'ok' icon on the right corner, when i click on any message or create a new one. (jataayu mms works fine)
ii> some keys like fm radio, bluetooth are not working properly -- not opening wat shud be opened (by default, those keys are not included in button settings.) voice command key is not visible in button settngs. <in short, need help with the key drivers of this device>
iii> shortcuts of some gps apps like gps catcher is not included in start menu. (they are in the windows folder) i want to make shortcuts in the start menu in the rom itself
iv> the htc tskmgr button does not appear on the right corner of the homescreen when installing it to the device as well when embedding the oem. htc tskmgr is there in the settings.
i want to fix those bugs especially the first and second, and want to launch this rom. but i am not able to fix any of them. i have very less knowledge for cooking up roms.. pls help me to fix this.
thnx in advance
ii and iii issues solved..
where is the rom
kalpeshmist said:
ii and iii issues solved..
Click to expand...
Click to collapse
brother,
where is the rom when upload rom & use some member then we give solution to you.
kalpeshmist said:
ii and iii issues solved..
Click to expand...
Click to collapse
to fix sms pls follow :
a) Take one SYS form this forum any build
b) LOcate a Module/file named as "Redist_lang_0409"
c) Copy all the files except the dsm, into the windows directory using resco explorer
d) reboot the phone and check.SMS shd b working
hdubli said:
to fix sms pls follow :
a) Take one SYS form this forum any build
b) LOcate a Module/file named as "Redist_lang_0409"
c) Copy all the files except the dsm, into the windows directory using resco explorer
d) reboot the phone and check.SMS shd b working
Click to expand...
Click to collapse
wheres the link of the forum... pls provide me.
ASUS P527 - sms prolbem
i have the same problem . After build rom , sms does not work..
Any solution..???
any solution to SMS problem
Hello everyone pls help me to find out the SMS problem solution for P527