Hi, does anyone know how to connect to a wireless network with a proxy server?? Cause everytime I try to go to the internet the proxy server I inserted!!!
Thanks in advance!!!
me too... on my office the wifi using proxy server, and i can't use it with my Artemis...
but if i got a strong signal n nice free wifi for internet, it works well.
Hope it helps.
I had same problem with WiFi at my office.
All I did to manage it was:
1) set WiFi network settings "This connects to:" -> "Work" (not "Internet")
2) proxy server has been set up automatically on next connect
If your network does not support automatic proxy setting try Start -> Settings -> Connections -> Connections -> My Work Network -> Set up my proxy server...
Hope it helps. Cheers!
Related
Added a Linksys WAP to my home network (itself a Linksys ADSL Router). When I search for a connection on my XDA2s I quickly connect to the WAP (The name of the SSID I set up on the WAP config appears in the Current Config window of my XDA).
Why can't I use PIE then. Sat in the cradle I can surf the net like a good'un, but WiFi just refuses to work. I can't access the WAP config page so I cannot be properly connected to the network.
I am getting somewhat frustrated - is this a WAP setup problem or a problem with my XDA?
Not sure if this is your problem but if it's complaining about 'No DNS server specified' etc when you're trying to browse you could try this:
Open Wireless Manager
Goto Tools->Network Cards
Select 'tiacxwln Compatible Wireless Ethernet'
Select the 'Name Servers' tab along the bottom
In the DNS box enter the IP address of your WAP
Soft reset (probably not ultimately necessary but it can't hurt)
Just a suggestion as it's proved useful for myself in the past.
JDH
P.S. If that doesn't work you could also try setting a static IP in the same dialogue
im trying to get an internet connection through my wifi connection. i have done search's and lots of people seem to be asking the same question but nobody has the answer.
at the moment i can access my c: using an application called Resco explorer. but i can not connect to the internet. im not sure what setting i should have on the wifi manger and on my pc. im also using AOL as my isp.
PLS PLS help :lol:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
looks like a no then
I got mine working but setting my wireless network adapter to connect to "Work".
Under Settings>Connections>Tasks>Manage existing connections>Proxy Settings> check the "This network connects to the internet" box
then
Under Settings>Connections>Advanced>Select Networks> "Programs that automatically connect to the internet should connect using:" to "My Work Network" (and the same with one for private network)
Also in your active sync settings, make sure your connection settings allow network (Ethernet) and RAS connections.
From previous research around this, i'm pretty sure you can only use the internet pass through under "WORK" settings only.
*thought i'd better register and contribute as i've gained a fair bit from this forum.
no good anyother ideas. i have searched through hundreds of threads and still no go
help pls
Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings.
i have done this on both my wifi network and my isp network.
still not working
Have you checked if you're getting an IP address from your Wireless Router's DHCP server? Also DNS settings and Gateway address should be there.
You can check this easily by using vxUtil (free )
these are my settings:
tiacxwln1 - tiacxwln compatible wireless
Ip address 192.168.0.2
subnet mask 255.255.255.0
default gateway 192.168.0.1
primary DNS 192.168.0.1
secondary dns
primary wins
seconfdary wins
DHCPs server 192.168.0.1
under serial usb
IP address 192.168.55.101
subnet mask 255.255.255.0
default gateway 192.168.55.100
primary DNS 127.0.0.1
Getting this error when I tried to allow my broadband connection to share with my wifi connection. If I unplug the wifi connection and try and share with another network I don’t get any errors.
Internet connection sharing (ics) cannot be enabled due to IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1 please ensure that no other client on the network is configured to use 192.168.0.1
hmmm ... ever had the same problem. all devices are able to connect to the same router except mine sx66.
then i change the router's channel to '1' .. tada .. now everyone is connected. it might sounds silly, but it worked for me.
try changing your ap wireless channel.
Re: does NE1 have the answer to wifi not connecting to the n
robboy said:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
Click to expand...
Click to collapse
i found the problem with activesync 3.8 and 4.0 somehow, so i reverted back to 3.7, now wifi can sync.
afaik, connecting to internet has nothing to do with activesync. its a direct connection to wifi router. use work location and check the proxy settings if u hv any? (at home i use connect to internet without proxy, at work i use connect to internet with proxy).
Also, for Activsync with wifi, make sure that the WINS server address is that of yr PC u want to sync with.
Have the o2 XDA IIs. Just got it yesterday actually. Playing around with it. I tried out a lot of things and they seem to work fine except for the internet on WIFI. Its working fine on GPRS.
I have manually configured the wifi connection with the WEP, IP address, gateway and DNS.
I open Internet explorer and its not working. it says THE PAGE YOU ARE LOOKING FOR CANNOT BE FOUND. When wifi is off, it connects to GPRS and it works fine.
Anyone else have this sort of a problem? I just came upon this site today. Read about the omega battery pack pro. I installed the trial version. Seems to be a good software. Anyone know if I can obtain it for free? The set cost me a lot already.
ok.. coming back to wifi. Anyone have any ideas how I can make it work?
check dns
if you can see network in batery pack pro check if wifi gives you a dns server and an ip
if it doenst you have to check you wifi config
Hi, I have the same problem too !
Mine is XDA II, no problem to surf net when hook-up to PC throught USB cable, but not with Wifi SD card. I check IP all normal.....any idea ?
how about dns?
do you check if there is one?
you can do that with batery pack pro
and you have to set network card to internet
check it please
How do you connect to the interent? There's a catch to that question because you have the option to choose "My ISP" or "My Work Network" in the Connection Properties. You should select "My Work Network" then tick the box where it says "This network connects to the internet". If you never want to connect via gprs cause it's so damn expensive, choose "My Work Network" for both internet access options.
Hi all, Thanks for response !
My Setting:
Connections > My Work Network > Advanced > Select Networks > My Work Network > Proxy Settings > Tick: The network connects to the Internet, UnTick: The network uses a proxy server to connect to the internet.
Configure Network Adapters > My network card connects to "The Internet"
Tick: SanDisk Wi-Fi SD Card > IP Address > Tick: Use server-assigned IP address, UnTick: Use specific IP address.
Hope to solve it.......Thanks !!
I connect to Wi-fi Line with Internet, but when i Sign In the messenger dont connect to wi-fi net and turn-on the gprs or 3G
try go to:
settings -> connections -> connections -> advanced -> select networks -> change the "Programs that automatically connect to the internet should connect using:" to "My Work Networks"
If you want to use GPRS, revert the setting back.
Thanks... Work good
cornelius said:
try go to:
settings -> connections -> connections -> advanced -> select networks -> change the "Programs that automatically connect to the internet should connect using:" to "My Work Networks"
If you want to use GPRS, revert the setting back.
Click to expand...
Click to collapse
Hmmzz... this doesn't work for me.
When I'm connected to Wi-Fi and I do the setting you describe, I get the error message as shown in the attachment when I want to sign in with Windows Live Messenger. Suggestions?
Something else: when still connected to Wi-Fi and I just leave the connection settings the way they where, and I sign in with Messenger, the Messenger wants to connect by GPRS/3G (the known thing).
But when I then quickly press "Cancel" (or press cancel a few times when one time isn't enough) in the GPRS/3G connection popup, the connection build up will stop and Messenger WILL actually sign me in, seemingly using Wi-Fi.
Do you think I can assume it's really using Wi-Fi and not the cellular connection, since there's NO GPRS/3G connection icon in the top bar at that moment?
If there is no GPRS/3G connection on top bar, it's using a Wifi.
Your prob similiar to my girlfriend's Hp 6828, Just make sure you setting for connection to your hotspot is setted to connect to internet, not to connect to work. and try to set the setting first then connect your wifi. My GF's 6828 prob solve by it.
Strange isn't it?
Then let me know...
cornelius said:
If there is no GPRS/3G connection on top bar, it's using a Wifi.
Your prob similiar to my girlfriend's Hp 6828, Just make sure you setting for connection to your hotspot is setted to connect to internet, not to connect to work. and try to set the setting first then connect your wifi. My GF's 6828 prob solve by it.
Strange isn't it?
Then let me know...
Click to expand...
Click to collapse
aneh juga yach bro....
cheers
indra9110
If i go to
Settings / Connections / Connections and Change on My Work Network with "Edit my proxy server" the proxy server for HTTP and try to download something with quick GPS or F-Secure the Proxy switches back to proxy11. Does anybody know about this problem and maybee know how to solve it?
Kind Regards
Seppl