P3300 Can not open - P3300, MDA Compact III General

My P3300 can't open. When ı connect to charger no light coming. Press to Power or reset can't open(with sim or without sim). Also ı have one more P3300. so I tried to battery. It has not any problem at the battery.

hhhmmm
There are some amazing guys in this forum but I dont think any would be able to help you because this sounds like a hardware problem...

i was thinking maybe u have problem with ur charger but hence u said u tried a different battery then i will rule that out
did u install anything recently
any recent flashing (rom details)
dogus06 said:
My P3300 can't open. I tried to charge no light. Press to Power or reset can't open(with sim or without sim). Also ı have one more P3300. so I tried to battery. It has not any problem.
Click to expand...
Click to collapse

jahrami said:
i was thinking maybe u have problem with ur charger but hence u said u tried a different battery then i will rule that out
did u install anything recently
any recent flashing (rom details)
Click to expand...
Click to collapse
I have flashed with "Carty' Fastest WM6.1 - Artemis" But It was working after flashing.

dogus06 said:
I have flashed with "Carty' Fastest WM6.1 - Artemis" But It was working after flashing.
Click to expand...
Click to collapse
EDIT : "My P3300 can't open" is Won't start?
I though it was can't charge or something... Sorry
My opinion is that the motherboard is dead.... If nothing happens, then is a failure in the hardware.
Well.. Hence it's dead you can try out two things that can solve some (not all) hardware failures. But only if it's out of waranty.
First : Try to search for sticked keys. Then give your PDA some spanks (Sometimes can solve bad connections problem).
Second: You can try to open it and clean it up. That whould be your last choice because you have to do it very carefully. See here how too:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Disassemble
Cheers

Zecanilis said:
EDIT : "My P3300 can't open" is Won't start?
I though it was can't charge or something... Sorry
My opinion is that the motherboard is dead.... If nothing happens, then is a failure in the hardware.
Well.. Hence it's dead you can try out two things that can solve some (not all) hardware failures. But only if it's out of waranty.
First : Try to search for sticked keys. Then give your PDA some spanks (Sometimes can solve bad connections problem).
Second: You can try to open it and clean it up. That whould be your last choice because you have to do it very carefully. See here how too:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Disassemble
Cheers
Click to expand...
Click to collapse
Thank you for your opinions. But ı have bought it one weeks ago. So warranty time is not finished yet.

If you have flashed the ROM will that not void your warranty?

ednap said:
If you have flashed the ROM will that not void your warranty?
Click to expand...
Click to collapse
But it can not open. So ı think technicial services can not understand the flashed.

dogus06 said:
But it can not open. So ı think technicial services can not understand the flashed.
Click to expand...
Click to collapse
Good luck then. Hope you get it up and running again quickly.

Do you know HTC Repair Center in Leipzig/germany or Bologna/Italy.

Related

bricked my GSM diamond with CDMA

hi folks,
seems to be that i have a BIG problem...
my t-mobile diamond had some heavy connection problems the last days (apart from this battery sucking system that made me charge it twice a day), so i decided to install both a new radio rom and a new WM rom on it.
after all those attempts didnt work (yes, i've read the threads and yes, i've followed the instructions! ), i got the ****ING IDEA to follow the instruction shown on youtube.com/watch?v=ZYGibMZC7-g (see also forum.ppcgeeks.com/showthread.php?t=36062) for a CDMA diamond. don't ask why, i thought that i could own a cdma phone as all of the gsm software didn't work... :-//
during step no. 1 (unlocking - yes, i wanted to do the whole programm! :-/ ) my diamond switched off and ... is dead now! no chance to switch it on, no chance to get into bootloader, no chance to hardreset...
now my question to the pros: do i have ANY chance to reanimate my diamond? i would be grateful for any ideas!!! thanks in advance,
p.p.
have you tried vol down and soft reset simultaneously?
jfran said:
have you tried vol down and soft reset simultaneously?
Click to expand...
Click to collapse
yes, didnt work...
Try a hard reset. If that doesnt work see if you can enter bootloader. Instructions can be found in a search.
krabman said:
Try a hard reset. If that doesnt work see if you can enter bootloader. Instructions can be found in a search.
Click to expand...
Click to collapse
thanks, but as i've already written, both doesn't work. my diamond is simply... DEAD! :-(
yep looks like it
anyone ANY idea to get my diamond back to life?
my frind i think you nead a new mb so you must go to htc service
It was quite common, when people were looking desperately for SU and were using CDMA soft.. Sorry to say this, but your diamond is a brick now, and only motherboard replacement will do. there are some hardcore people on this forum who are rescuing such phones, but I'm not sure if they are still operational. Search for JTAG on teh forum, or send it to the service. If it;s on guarantee, then you should be fine, as they shouldn't be able to determine what happened. Otherwise you can always zap the phone with a stunner, and presto, phone ready for guarantee.
your phone is dead bro, i will be willing to buy it from you, i need peices to fix mine, pm me if interested
hey dude, dont worry..u're like the umpteeth guy who did it..just refer to this forum forum.xda-developers.com/archive/index.php/t-488687.html..haha
I have long time ago also installed a CMDA-ROM accidentally. When the flashing procces ended I just got only the slpash screen (black without Rom Version Information).
I thought my Diamond was bricked but i could not believe it . After i had performed a hardware reset several times i used mitty and i could flash a ROM.
Now i have mostly a ROM as backup on my storage-card this in case it will go wrong during flashing procces.

question about a bricked hero

Hy, i found a guy who has a bricked hero ( stucked at bootloop ) he is seling it preaty cheap and i'm wondering if maybe it can be revived. He said that u push the power buton, it starts up stays like that for like 5 seconds, than it shuts down. he also said that the problem started when he tried to upgrade it from 1.6 to 2.1 and also he mentioned that the phone was rooted before, but now wont enter in cyanogen ( havent got the time yet to read what cyanogen is).
here is a youtube video ( not his phone ) but where the phone is stuck, u can look at the second 26, there his phone reboots. what u say? can it be somehow revived? what do u sugest me? curently i own a diamond and i would love and android phone. cheers
littlej said:
Hy, i found a guy who has a bricked hero ( stucked at bootloop ) he is seling it preaty cheap and i'm wondering if maybe it can be revived. He said that u push the power buton, it starts up stays like that for like 5 seconds, than it shuts down. he also said that the problem started when he tried to upgrade it from 1.6 to 2.1 and also he mentioned that the phone was rooted before, but now wont enter in cyanogen ( havent got the time yet to read what cyanogen is).
here is a youtube video ( not his phone ) but where the phone is stuck, u can look at the second 26, there his phone reboots. what u say? can it be somehow revived? what do u sugest me? curently i own a diamond and i would love and android phone. cheers
Click to expand...
Click to collapse
I don't think that's bricked mate. A bricked Hero, typically, won't turn on at all.
Can he enter Fastboot?
I think it's Home+Back+Power...
as i said i dont have the phone but i could buy it for about 140euros if i have any chance to revive it. cheers
littlej said:
as i said i dont have the phone but i could buy it for about 140euros if i have any chance to revive it. cheers
Click to expand...
Click to collapse
i think i would take it.
Or you could be generous and point him here, so he can fix it himself?
You know, be nice?
Branwen said:
Or you could be generous and point him here, so he can fix it himself?
You know, be nice?
Click to expand...
Click to collapse
+1
(10 char)
he is seling it especialy becouse he does not have the time to get it to service or read some forums on the internet... the idea is, can it be fixed? should i buy it or not ?
littlej said:
he is seling it especialy becouse he does not have the time to get it to service or read some forums on the internet... the idea is, can it be fixed? should i buy it or not ?
Click to expand...
Click to collapse
The chances are, it can be fixed.
Story seems a bit strange to me
But yeah sounds like it can be fixed.
Offer 100 for it. Say you might be able to fix it and you are taking on all the risk!
This happened to me too. But it isn't bricked, at least it wasn't for me. I don't know if it's rooted, but mine was. I took out the sdcard, booted in to recovery (the one where you flash new ROM's, dunno if it's the right name). And then I wiped, and installed a new ROM.
Hope this helps
hy, thx for information, can u be a little mor specific? if somehow it aint rooted is it anyproblems entering into recovery mode? this hapend to you also while upgrading from 1:6 to 2:1 ? sry for mistypes, posted from diamond cheers
littlej said:
hy, thx for information, can u be a little mor specific? if somehow it aint rooted is it anyproblems entering into recovery mode? this hapend to you also while upgrading from 1:6 to 2:1 ? sry for mistypes, posted from diamond cheers
Click to expand...
Click to collapse
There is no 1.6 or 2.1 on Hero.
Also, Cynaogen mod hasn't been released for Hero but for the G1.
I would make sure that you are getting what you're paying for. Buy it off ebay and make him write that he'll accept returns.
If you see the network operator logo or the HTC logo, I reckon it's not bricked. Bricked usually equals nothing, or just an error triangle or something like that (even the error triangle may indicate hope).
I reckon it may be worth a shot (can't see any youtube link to see for myself).
Back+Power is to enter fastboot FWIW. Maybe you could ask him to plug it in and see if the charging LED comes on??? That sometimes indicates it's still working.
I'll vote 'boot-loop', which isn't critical. Should be fixable by goldcard and RUU downgrade, then installation of custom ROM.
screwhead89 said:
There is no 1.6 or 2.1 on Hero.
Click to expand...
Click to collapse
there is one leaked 2.1 rom, from which several 2.1 roms have been built. all can be found here and on modaco's. also there is one 1.6 rom, which hasn't been updated since 30. october 2009.
screwhead89 said:
Also, Cynaogen mod hasn't been released for Hero but for the G1.
Click to expand...
Click to collapse
jnwhiteh released a build cyanogen's 2.1 sources for the hero.
kendong2 said:
jnwhiteh released a build cyanogen's 2.1 sources for the hero.
Click to expand...
Click to collapse
The owner of the phone presumably said that he "can't get into Cyanogen anymore". I think he meant Cyanogen's recovery image v1.4, which preceded Amon's
One should try loading a fresh recovery image - running the "Fastboot" part of the code at: http://forum.xda-developers.com/showthread.php?t=561124
If the recovery image is corrupted, there could be issues of "access-denied" running certain "fastboot" commands, depending on method of past rooting. Even with a Goldcard. I was there.

P l s h e l p ! ! !

hello... why i cant access internal sd card after flash?
it says "no sd card inserted" when i want open "my files"
You flashed with your SD in?
Sent from my GT-I8150 using XDA App
With rom did you flash?
Sent from my GT-I8150
Go to recovery (Vol UP + Power + Home) then wipe data and cache or do factory reset
After that flash it again
sorry all for quiet a few days...
i flash with no sd card insert...
flash with cowthgun slim shady...
after a few days keep try n error now my sgw cant turn on...
even when i put charger oso nothing out on screen...
that's sound like a hard-like a **** brick man..
Maybe it caused by sd swap(vold.stab) thing that apply on that rom..and then u flashed with no extrnal-sd inside..that causes havoc.!
If u want unbrick DIY style..google this;usb jig
If u don't want get ur hands dirty,service centre..
Gud luck..
Sent from another space
jahlee said:
that's sound like a hard-like a **** brick man..
Maybe it caused by sd swap(vold.stab) thing that apply on that rom..and then u flashed with no extrnal-sd inside..that causes havoc.!
If u want unbrick DIY style..google this;usb jig
If u don't want get ur hands dirty,service centre..
Gud luck..
Sent from another space
Click to expand...
Click to collapse
brick??? oh no...
flash with cowithgun slim shady is working actually...
then after i notice that i cant access my files (it says 'no sd card inserted'),
then only i try n error using swap,mount n unmount using root toolkit...
after nothing happen n i really tense with it,i off my fon...
BANGGGG,my sgw cant turn ON already... until today...
its because of whatar actually?
im just use 2 weeks... i suspect its because overheat cause at the cover area camera its like got a buble there... or its because software problem? cause i wanna claim a warranty by SME... but need to wait until next (now close 1 week for Chinese New Year).
am i possible to claim warranty if its caused by software?
thats the point.. if they can detect its my problem,is there any warranty?
but im strongly trust that my fon is overheat cause got a bubble at camera area near to micro-usb port...
P/s : back to b4,im use a thether to connect to internet while im doing my rooting,flashing...
b4 that,i'
cairo87 said:
am i possible to claim warranty if its caused by software?
thats the point.. if they can detect its my problem,is there any warranty?
but im strongly trust that my fon is overheat cause got a bubble at camera area near to micro-usb port...
Click to expand...
Click to collapse
If it would have been the software of Samsung(stock rom), which would have caused the overheat, you would have been on the safe side.
But because you were using a custom ROM, which even provides overclocking, which most probably caused the overheating and bubble, you actually don't have any warranty left. You can just try to send your phone to Samsung and if you are lucky they won't find out you were flashing custom ROMs and they might replace it.
BTW: A Topic with the name "Plshelp" is not very useful. If everybody would do that, this forum would be a mess. So next time think about a topic which expresses the problem. If you could change the name of your topic it would be good.
good luck
THE-E
THE-E said:
If it would have been the software of Samsung(stock rom), which would have caused the overheat, you would have been on the safe side.
But because you were using a custom ROM, which even provides overclocking, which most probably caused the overheating and bubble, you actually don't have any warranty left. You can just try to send your phone to Samsung and if you are lucky they won't find out you were flashing custom ROMs and they might replace it.
BTW: A Topic with the name "Plshelp" is not very useful. If everybody would do that, this forum would be a mess. So next time think about a topic which expresses the problem. If you could change the name of your topic it would be good.
good luck
THE-E
Click to expand...
Click to collapse
ok... hope they wont find out why my fon become like this...
hope they just replace it...huhuhu...
btw,thx 4 da advice...^^
cairo87 said:
ok... hope they wont find out why my fon become like this...
hope they just replace it...huhuhu...
btw,thx 4 da advice...^^
Click to expand...
Click to collapse
Yeah..I wish u luck man...
I once bricked my phone too..a sgs..but not because of overheating,but flashed a wrong rom..
I send it to service centre and they ask me how its happen..i'm just telling that "I don't know anything about that ****.."after 4 weeks of miserable waiting they finally call..
They said,its caused by mainboard failure and replace it by a new one..haha..I'm just lough in their back..they dont find out that I rooted my device and mess it up..
Good luck bro..
Sent from another space
jahlee said:
Yeah..I wish u luck man...
I once bricked my phone too..a sgs..but not because of overheating,but flashed a wrong rom..
I send it to service centre and they ask me how its happen..i'm just telling that "I don't know anything about that ****.."after 4 weeks of miserable waiting they finally call..
They said,its caused by mainboard failure and replace it by a new one..haha..I'm just lough in their back..they dont find out that I rooted my device and mess it up..
Good luck bro..
Sent from another space
Click to expand...
Click to collapse
sorry all...
my mistake...
its not becoz of overheating...
i tot there is bubble.. no,its not... its juz a design...
sorry again...
i think its because software problem cause of i keep try n error use mount n umnount in root toolkit...
my battery is ok...(test with another sgw)
now plan to go to SME on this wednesday...
hope i got luck as u bro...^^
if not,i dunno how to do...
maybe try USB jig?

[SOLVED]Gio Bricked?

hey guys!
I have a gio that today i decided to root it and change rom after, but after i rooted ( i think it went well ) i installed Rom Manager from market, as i've done on my htc click. then i flashed from Rom Manager the CWM , but i think i clicked on wrong phone. i turned off gio, and now it just dont start, isn't detected by my computer. i've already tried volume down + home + turn on, home + turn on and so far nothing happend.
can someone please help me please?
Try to use Download Mode, i think by pressing Power+Home+volume down or up keys together. If so then use Odin to flash custom or Original rom and one more thing :::Never ever use Rom Manager for installing Roms,,Never:::
You're bricked....
marcolameirinhas said:
hey guys!
I have a gio that today i decided to root it and change rom after, but after i rooted ( i think it went well ) i installed Rom Manager from market, as i've done on my htc click. then i flashed from Rom Manager the CWM , but i think i clicked on wrong phone. i turned off gio, and now it just dont start, isn't detected by my computer. i've already tried volume down + home + turn on, home + turn on and so far nothing happend.
can someone please help me please?
Click to expand...
Click to collapse
Sorry man, your gio is BRICKED! same thing happened to me in january but got it back from repairs. Just say you dropped it or something and it wont turn on, they will repair it. Change mainboard and it will be fixed.
That's sad.. there should be alternate way. As when we install wrong drivers in PC motherboard did not bricked so mobile motherboards should behave the same,But they are not. Well bro its gonna cost you about half of mobile price with no warranty. Just best wishes for you.
amd4phenom said:
Try to use Download Mode, i think by pressing Power+Home+volume down or up keys together. If so then use Odin to flash custom or Original rom and one more thing :::Never ever use Rom Manager for installing Roms,,Never:::
Click to expand...
Click to collapse
it dont work! i've tried already!
on my htc tattoo ( click) i did it from Rom Manager with no problems at all, i guessed it was the same way in gio, but not!
i will take it tomorrow to a samsung official partner and see if it gets fixed, i bought him by christmas, lets hope its free
ty anyways guys
i just dont understand why mobile mobos got bricked by wrong installation, Service center probably gonna flash its Bios if Motherboard has, otherwise they replace the motherboard,, it will cost you bro. Rooting voids your warrenty
amd4phenom said:
i just dont understand why mobile mobos got bricked by wrong installation, Service center probably gonna flash its Bios if Motherboard has, otherwise they replace the motherboard,, it will cost you bro. Rooting voids your warrenty
Click to expand...
Click to collapse
Who said they will find out you're rooted? I had mine repaired for free, I told them it suddenly shut down and wouldn't start....
bootloader is broken
jtag or change mainboard
中国人正在尝试提高!
(translation:Chinese people are trying to improve themselves!)
i've delivered it in samsung center here and they said its covered by warranty!
will take 10 days to fix it, and problably it will be free, but lets wait
anyway, rom manager should have an confirmation message before flashing CWM!
I help myself with downloading stock clean stock ROM, cause I can't backup this.
mobile was ready today!
didn't had to pay, they changed some parts, installed a new version 2.3.6, and working great!
thanks for the help / tips guys
marcolameirinhas said:
mobile was ready today!
didn't had to pay, they changed some parts, installed a new version 2.3.6, and working great!
thanks for the help / tips guys
Click to expand...
Click to collapse
I know that feel, and welcome back
iok1 said:
Sorry man, your gio is BRICKED! same thing happened to me in january but got it back from repairs. Just say you dropped it or something and it wont turn on, they will repair it. Change mainboard and it will be fixed.
Click to expand...
Click to collapse
For free???
In here ( indonesia ) even i use my waranty, i must pay...
marcolameirinhas said:
mobile was ready today!
didn't had to pay, they changed some parts, installed a new version 2.3.6, and working great!
thanks for the help / tips guys
Click to expand...
Click to collapse
Ure verry lucky bro...
@wiwid_colgate
Galaxy Gio S5660
#GalaxyICS
this just happned to me so if i read this correctly you guys are saying that there is nothing i can do but send it to get repaired? should i go to my service provider ie virgin mobile canada?
Yes. You are right you can't do anything.
Android_Forever said:
Yes. You are right you can't do anything.
Click to expand...
Click to collapse
i have no one to blame but my curiosity and rom manager i just hope they don't find out that i have rooted my phone and erase some pre pack apps that i don't use
They can't find anything if its bricked.
If they ask something just say you but power off and it wont start anymore.
Sorry my english.
Is the ROM manager team still not alerted of this?!
Angorass said:
I help myself with downloading stock clean stock ROM, cause I can't backup this.
Click to expand...
Click to collapse
what Clean Rom are you referring to?
lemmymet said:
Is the ROM manager team still not alerted of this?!
Click to expand...
Click to collapse
no, i think that they wont change anything big in app because of some small samsung phone got bricked

Unlock issue after screen replacement (device crashes frequently)

Hey guys
My ONEPLUS 3 display got broke down.
So I went for a display replacement in service centre.
For which they charged me 7500/- ₹
But after replacement.. the phone is crashig a lot.
I need to press power button end number of times & still the phone won't respond.
I don't know why this is happening.
Can someone suggest a solution?
Currently the device is on - Oxygen OS 9.0.5 (non-rooted)
Please help! ?
please try and unbrick your device by downloading this tool https://androidfilehost.com/?fid=6006931924117936392 then run msm download tool as administrator
kallum7 said:
please try and unbrick your device by downloading this tool https://androidfilehost.com/?fid=6006931924117936392 then run msm download tool as administrator
Click to expand...
Click to collapse
will this wipe device internal storage??
Lucifer213_ said:
will this wipe device internal storage??
Click to expand...
Click to collapse
yes
kallum7 said:
yes
Click to expand...
Click to collapse
what about caseium kernel?
someome told me to install it..but im not sure if it supports oxygen os latest build.
Lucifer213_ said:
what about caseium kernel?
someome told me to install it..but im not sure if it supports oxygen os latest build.
Click to expand...
Click to collapse
nope because the system drivers are corrupt so it needs to be reset by unbricking the device
ok thanks, but can u explain me the steps , cause i don't exactly know how to unbrick. Cause I've never done so.
I don't want anything wrong to happen.
Lucifer213_ said:
ok thanks, but can u explain me the steps , cause i don't exactly know how to unbrick. Cause I've never done so.
I don't want anything wrong to happen.
Click to expand...
Click to collapse
Firstly download the unbrick tool I have sent you through the link then switch off your phone and make sure cable is unplugged then hold the volume up button on your phone and then plug in the USB cable to the computer and phone then on your computer and open device manager and make sure under ports it says Qualcomm 9 and then extract the unbrick tool then run mam as admin then click start
Lucifer213_ said:
ok thanks, but can u explain me the steps , cause i don't exactly know how to unbrick. Cause I've never done so.
I don't want anything wrong to happen.
Click to expand...
Click to collapse
This has a collection of unbrick tools and versions of OOS.
This contains detailed instructions also.
Hope you solve your problem.
If not and you still have warranty for the display (OnePlus gives atleast 3 months warranty on replacement), take the phone to the Service Center. In fact, if you have warranty, that should be the first option.
Thanks for the response.
But I don't think my device is bricked, cause the phone is on working mode, but it's just that whenever I lock my phone.. It does not gets unlock on the first attempt. I need to press the unlock/power button end number of times & the phone still don't responds. It gets crashed and the System UI error occurs & asks for force stop & the phone is lagging a lot. I can't even use it properly.
I would still recommend doing it
have you got it sorted
kallum7 said:
have you got it sorted
Click to expand...
Click to collapse
I'll do it today/tomorrow
& Share the details.
kallum7 said:
have you got it sorted
Click to expand...
Click to collapse
I completed the process.
But it's still happening.
Not that much. But it is happening every 5th time I try to unlock my phone.
By this point you have two options get another device or get your op3 and take it to a OnePlus service center and get it repaired
kallum7 said:
By this point you have two options get another device or get your op3 and take it to a OnePlus service center and get it repaired
Click to expand...
Click to collapse
OnePlus service is worse.
I guess I need to purchase a new smartphone then, or find some other solution.
kallum7 said:
By this point you have two options get another device or get your op3 and take it to a OnePlus service center and get it repaired
Click to expand...
Click to collapse
Though, thanks a lot for helping me out.
Lucifer213_ said:
Though, thanks a lot for helping me out.
Click to expand...
Click to collapse
Welcome
Anybody here got solved this problem?am facing this issue too.please help
THREAD CLOSED! If interested in the subject please follow this already existing thread:
https://forum.xda-developers.com/oneplus-3/help/faulty-display-replacement-software-t3960068
All posts of this thread have been copied to the other one.
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse

Categories

Resources