Hi everyone,
I used vivi's Rom Kitchen for Asus P525 to cook my own ROM. Everythings fine, except one thing: I can't send SMS.
When I try to get the Text Message Settings (Settings -> Phone -> Services -> Voice Mail and Text Messages) I get a "Network Error".
Any ideas?
Thanks,
SamuelTee
Ok, I found the reason. The sms_providers.dll was missing. I cooked a new ROM including that and it worked.
Now, is there any way to install this DLL (cab ...) without the need of updating the whole ROM? I tried using cab (including dll and registry entries) but it didn't work.
I read something about "signing" dlls and certificates. Might this has something to with it?
Thanks,
SamuelTee
Related
Greetings,
I have an imate pDA2k wich has a nifty app called Simmanager (SIM_mgr.exe). I also have an IPAQ 6315 for work which does not have the app. I copied the exe from the PDA2k to the IPAQ and all is well, but...
It appears that SIMManager interfaces with Contacts and adds "copy to sim" to the contacts menu.
Maybe I'm way off base, but I think if Simmanager is installed normally, i.e. via a cab file the menu option would apear in contacts.
Soooo, does a Simmanager.cab file exist? If so where is it? An I "way off base". Is there another way for me to get the Copy to Sim option to show up of the IPAQ contacts menu?
I've seen this posted in lots of places with no real solution. Is the solution out there?
Tanx in advance
RC
Here you are!
awsome boss!!!
I need this software install CAB file.
anyone can help me ? maybe have someone upload in this forum,But I can't find ,So sorry to that.
i also want to get one
i need it too!
I have arcsoft 3.5.1.5 but as OEM for cooking in the ROM. But I have noticed that 3.5.1.5 has a major problem. It stores an incoming MMS in a folder called "New". The message gets transfered to "Inbox" only after it is read. As a result the notification which used to come so far in the messaging (today plugin) or any other today plugin (like SPB diary,PB or any other) does not come. Thats why I have come back to 3.0.7.19.
hi,
currently i have arcsoft 3.0.0.32 and i found and downloaded 3.0.7.6. when i tried to install it, the installation was unsuccessful. do you have any idea what is wrong with it?
i also have problem with my signal, sometimes its gone (no service).
Need Help 4 a newbie Pls... Thanks!
I probably have a really stupid question, but I am having trouble finding the version of my mms composer.
Nevermind... Found it... Thanks...
MMS_v3.5.1.5....
http://www.hi-pda.com/forum/viewthread.php?tid=332225&extra=page=1&page=1
anyone know why it's in three parts?
trojan9x said:
anyone know why it's in three parts?
Click to expand...
Click to collapse
Uploading issues. You have to simply download all three and run winrar. They shall join to become one automatically...
3.5.1.5 installed but how to configure?
I've got 3.5.1.5 installed but how do I configure for my account? Seems to be quite different from 3.0.1.16
Menu/options/MMS account
Nope...something dodgy with my 3.5.1.5 installation I think. I can click on the MMS a million times but it doesn't bring me to a config screen. Quite unlike v3.0.16.6.
Thanks anyway
Hello
I'm looking for this software MMS Composer Version 3.0.0.32, so I hope to find this software
Is it in chinese? Or the Transport included in the RAR the chinese one? I noticed the transport and windows in the chinese text file...
is there any newer versio for this program please
--------------------------------------------------------------------------------
Hello gurus.
PCM Keyboard I consider as great tool the same as PocketCM. But now I discovered strange behaviour - when I'm trying to use it somewhere outside the PocketCm, I can't see text. I'm typing blanks only.
Inside PocketCM PCMK works properly. (no matter which version)
Would you suggest me how can I repair it ? (resets, reinstals, deinstals and instals again don't help)
A cople days ago I flash my Trinity with last WWE/Light bepe ROM. Before that I used the aplication with easy (on many ROMs) . I do not claim that it's because of bepe ROM, but who knows... Would someone with bepe ROM check this up?
thanks,
Malin.
The problem is bepe rom... or better... the new os version...
thanks for quick answer. now I at least know, that the problem is not in my system.
I hope, they adjust PCMK to new OS....
Try deactivating xT9. It works on my device (with Bepes Rom) when xT9 is deactivated in the rom settings tool.
Its also happening IN contact manager while typing an sms I am using the 0.15 verison
Yes, after deactivating xT9 it start working...Great - thanks for idea
hai guys, I noticed after using it a few weeks that I'm missing the Transcriber feature as input option in my WM6.1 Classic, I'm using CE OS 5.2.2021 Build 19199.1.0.0
I searched around here and tried two different Transcriber.Cab's from this site and from www.4winmobile.com bot do not work (Transcriber still doesn't show up; and WM6.1 installer tells me "it may not work, as program is designed for an older version"). No registry entries either (I searched for "transcriber" keyword across entire registry).
Can anyone pretty-please help me out on this one ?
I'm using a hx2495b iPAQ and got the english ROM from a (Korean?) website, which was linked from here (somewhere in a "hx2000"-ROMflashing thread. Everything else seem to work fine.
thx
@
For some HTC models post #23 in this thread provides a solution:
http://forum.xda-developers.com/showthread.php?t=406136&page=3
maybe it also works for you...
KnOeFz said:
For some HTC models post #23 in this thread provides a solution:
http://forum.xda-developers.com/showthread.php?t=406136&page=3
maybe it also works for you...
Click to expand...
Click to collapse
Nope doesnt work, if i read it correctly it's for BLOCK RECOGNIZER and not for TRANSCRIBER - i looked into the CAB-file, and it's pointing to a MSIMNL.DLL (for Netherlands InputModule) so i did it manually to MSIM.DLL (which is 120kbyte in size) - which according to the registry is/was set correctly, but not even in the registry was a TRANSCRIBER pointer/entry. After installing your suggested CAB i got TWO BLOCK RECOGNIZER modules/choices
It seems to me that both relevant DLL's are there (MSIM.DLL w. 120kbyte) and a MSIM.96.DLL (67kbytes in size), just missing the proper registry pointers to "activate" it.
anyone more suggestions?
cheers
@
The download cab under "Deleted from ROM (1...." at
http://forum.xda-developers.com/showthread.php?t=313081
works on my Loox N560 WM6.1. And it looks the full monty!
well, it's getting closer
it shows at least up now in the input selection pull-down menu, but it's kinda "defective" the area is not completely drawn, and it's missing entries. My windows-Installer tells me that this too was "designed for an older version of windows Mobile"
again, I'm using WM6.1 Classic, CE OS 5.2.2021 Build 19199.1.0.0 and in soft-boot the boot ROM reads as version # 5.20.01.C ENG
i got my ROM from here http://www.pdaviet.net/showthread.php?t=23740&page=2
not sure if that helps further
cheers
@
hm, now i got even a weirder effect.
i got myself Calligrapher v8.7 Build 8.379.0810
but the wierd thing is, it installs nicely, but i cannot start it up. Only the Config Manager and the PenCommander start up, but the WriteAnywhere or WritePad will not start, I cant even put in my serial number.
I noticed that at installation it has an option to uninstall the original WM 6.1 TRANSCRIBER (which I'm missing) - that option had a check-mark, but was "grayed out"/disabled.
anyone have an idea ? I'm getting desperate
cheers
@
I'm having the same problem as atlana, I installed Calligrapher 8.7 but cannot get it to launch. Calligrapher support suggested I delete some plug-ins from my Today screen, but even with NO plug-ins I could not launch Calligrapher.
Has anyone come up with a fix? thanks
Hello all.
I'm building a barebones 6.5 ROM using ervius visual kitchen. I have been building many tests as I go along but there are several things I can't sort out due to the lack of instructions on where things are. Can you help? I really want to get this sorted & released asap!
1. I need to apply the following entries so I created a new folder in /EXT and dumped these keys into it:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\GWE\Menu\PopFnt]
"Ht"=dword:00000381
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\"Messaging"]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\"Owner Info"]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\"Messaging"]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today]
"Date"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\System\GDI\Rotation]
"HideOrientationUI"=dword:00000000
[HKEY_LOCAL_MACHINE\System\GWE\Menu]
"CUIHandler"=dword:00000000
But when the ROM is loaded only the first key has been applied. Is this a sound way to include regkeys or am I doing it wrong?
2. I need the default theme to be the HTC black. It's installed, but how do I set it as default?
3. I need to remove start menu entries (help, activesync, games, search, calculator) which I did by commenting out the entries in \OEM\Diamond\0409\OEM_Lang_0409\initflashfiles.dat but activesync & calculator still show
4. despite having Microphone AGC & Clear Storage NOT installed the icons still show up in System. How do I rid of them?
5. when I click on Camera on startmenu it complains the file "camera.exe" doesn't exist. I have installed the HTC camera package in 001_Base
THANK YOU FOR YOUR HELP!
for regedits i noticed the same thing try bundleing them into a cab or program
Eg. go to your TF3D folder and add those reg entries into the bottom of the TF3d registry list
or you can add a cab to your "config_operator.txt" list