Hello guys...
After trying out whatever solution I could find, I'm still none the wiser: is there a cooked ROM that has proper support for Greek language? By 'proper' I mean a Greek keyboard and Greek T9, either built-in or by adding it separately (via a cab?)...
Desperately yours,
Themis
It is possible in almost all ROMs around. I would suggest try panosha light 3.
Thanks for your reply... Will try Panosha's (with added TouchFlo - I think Panosha's is totally naked?), but does it have Greek really built-in?
How is it possible with 'almost all ROMs'? I am running Bepe's and tried a couple of others, also tried using the cab that adds 14 languages to no avail...
Thaks once more
T
Clean version is naked, Panosha light 3 is not and includes TF3D.
For Greek in HTC keyboard of every ROM... Greek Diamond keys.cab.
Check this place... http://www.navimania.gr/showthread.php?t=9234
Holly [email protected]!!! I had tried this one and it did not work (I don't remember what exactly, either T9 or the skin), but now I tried it again and it works perfectly... Maybe it is because I installed some Greek T9 cab (have tried so many solutions, not sure any more!)!!! Really, what solution do you suggest for Greek T9? I think it's time for a hard reset after all I have installed, and it'd be nice to have it work as it does not without going through all of it again
S'eyxaristw... =)
T
PS ahhhh glitch: 70 chars only... better than nothing, I guess, but damn annoying...
krakout said:
PS ahhhh glitch: 70 chars only... better than nothing, I guess, but damn annoying...
Click to expand...
Click to collapse
Yes that's the only problem so far.
First install the cab and after that install the 14 languages T9 file you have. Doesn't work that way?
As I said I've installed too much stuff in trying to find a way, so I wouldn't know! But it does work now, and I did install both. Anyhow, let's wait for a 160 char solution...
thanks!
T
Related
Hi,
I just flashed my spv artemis with Artemis Touch 3..
All fine but... I'd like to use alpha-numerical Touch Keypad when writing texts,etc. The problem is that there are few T9, but obviously not a Polish one. I don't know how to upload a T9, where to take it from or at least deactivate the T9 feature at all...
Any feedback mates?
thanks
Polish T9 is not a problem, but Polish xT9... that is the problem... More about XT9 input, you can find here: http://forum.xda-developers.com/showthread.php?t=343106
For disable xt9 use THIS cab
Thanks a million!
You brought me some hopes accodrding to the lack of Polish XT9. The thread seems to be quite fresh.
The *.cab unfortunately messed something up, disabled the 12-buttons Keypad and turned it into a qwerty one. Strange. Even resetting haven't helped.
Anyway I uninstalled it and all fine now.
I've noticed a simple button on the keypad tha allows you to disable the XT9 Is that thanks to the cab or it has always been there? dunno
I suppose that the best temporary resolution would be installing a keypad supporting the old T9, install a POL one and wait for some tough brains to develop the Xt9 translation (as I am not a tough brain able to help in any means...)
cheers
pozdrawiam
Radek_PL said:
The *.cab unfortunately messed something up, disabled the 12-buttons Keypad and turned it into a qwerty one. Strange. Even resetting haven't helped.
Click to expand...
Click to collapse
That was happend because this cab permanently disable xT9 dictionary, and it's completly normal.
Radek_PL said:
I've noticed a simple button on the keypad tha allows you to disable the XT9 Is that thanks to the cab or it has always been there?
Click to expand...
Click to collapse
It's allways been there
Radek_PL said:
I suppose that the best temporary resolution would be installing a keypad supporting the old T9, install a POL one and wait for some tough brains to develop the Xt9 translation (as I am not a tough brain able to help in any means...)
Click to expand...
Click to collapse
Yes, for now this is the only way to have T9. I'm also waiting for someone who can develop xT9 lang, because as you, I don't know how
cheers
pozdrawiam
Hi,
I've done some work on the keyboard cab available on the diamond forum and adapted it to the touch HD.
I've also addressed some issues that the diamond version suffers from.
Here's a list of what's been done:
Version 1.00:
- Graphics for Compact Qwerty & Phone Keypad have been recreated to accomodate the HD
- Landscape mode integrated into the cab
- Fixed kdb files for Full Qwerty, Compact Qwerty and Phone Pad
- Hebrew doesn't replace Italian anymore! Instead, it is added above Italian
- Hebrew-related files and registry keys are named properly with the correct codes and names and according to the convention in other language-related files.
- T9 works partially. It will learn the words you use and will suggest according to that. Unfortunately I couldn't find a compatible t9 dictionary (and believe me I tried!)
Installation instructions:
1. Download the attached CAB
2. Copy to your memory card via ActiveSync
3. IMPORTANT: Using Schap's Advanced Task Manager (or any other capable program), kill the process SIPGT_app.exe
4. Run the CAB
5. Soft reset
I've tested this with a UK 1.14 ROM and the free hebrew support.
I do not recommend installing this alongside Eyron (didn't try) as it also attempts to modify the native keyboard and would probably conflict.
Congratulations you have a (almost) native HD hebrew keyboard!
For tactile feedback (ala Eyron) I recommend installing snailslug's great TouchResponse (http://forum.xda-developers.com/showthread.php?t=450256) you can configure it to work only when the keyboard is open and the stylus is in and it provides very good feel without slowing down the device.
On the T9 front, I'd be happy if anyone could help me out. If you could get me some hebrew ldb dictionary files from ANY phone with T9 it might help me decipher this evil proprietary format.
I'd like to thank Alex for the original diamond cab and also nir36 and everyone who contributed to the development of the free hebrew support.
(Note that the attached cab is provided as is and I take no responsibility in case your device bursts into flames.)
Cheers!
Thanks!
how do you change from hebrew to english? there is an option to do it with the ABC->T9 button? I'm using the txt files from Eyron mui.cab to replace the Italian in my device but it seems to have some kind of bug when i'm replacing it from english to hebrew - the kbd will stuck for 5 minutes every time! and there is no half qwerty or phone pad option...
I'll try your version soon and will report back to you.
Good job!
I'll try it out today and let you know how it works.
tnx very much !!!!
daniel
Please post your skins.
Hi. just checked your files - great work!
I used to extract the files from Eyron cabs and use them on my device, but it was good only for the full qwerty - and it replaced the Italian on my device, your solution is much better.
and now - for the T9 thing - it works only in half qwerty and phone pad modes, not in the full qwerty mode.
any way - great work. you made a great solution for the free-hebrew community
*Big* thanks. Works perfectly!
avimak said:
Thanks!
how do you change from hebrew to english? there is an option to do it with the ABC->T9 button? I'm using the txt files from Eyron mui.cab to replace the Italian in my device but it seems to have some kind of bug when i'm replacing it from english to hebrew - the kbd will stuck for 5 minutes every time! and there is no half qwerty or phone pad option...
I'll try your version soon and will report back to you.
Click to expand...
Click to collapse
No there isn't. It's impossible to implement. the only way to switch languages with ezinput is through the menu..
avimak said:
Hi. just checked your files - great work!
I used to extract the files from Eyron cabs and use them on my device, but it was good only for the full qwerty - and it replaced the Italian on my device, your solution is much better.
and now - for the T9 thing - it works only in half qwerty and phone pad modes, not in the full qwerty mode.
any way - great work. you made a great solution for the free-hebrew community
Click to expand...
Click to collapse
what do you mean?
In full qwerty it would only suggests word completion (it has nothing else to do)
cheers
eduard32 said:
Please post your skins.
Click to expand...
Click to collapse
well I only needed to change 4 files. here they are
maybe you can try using this...
u could probably rip the T9 words off of it...
Does it also support HTC Touch Diamond?
If not, where can i find the native hebrew kewboard for the Diamond?
Thanks!
dudikbs said:
u could probably rip the T9 words off of it...
Click to expand...
Click to collapse
Thanks I already have this file and unfortunately it looks very different from the HTC files. I also have another one from Sony Ericsson which looks more like that HTC ones but I couldn't get it to work.
Still haven't given up though
Nice!
Going to check it out...
dudikbs said:
u could probably rip the T9 words off of it...
Click to expand...
Click to collapse
where do i have to put this file?
has anyone tried on diamond or TP?
Installtion Failed
I've tried to run the cab in my HD but it says: "Installtion was unsuccessful. the program or setting cannot be installed because it does not have sufficient system premissions", what can i do?
Did anyone find a Hebrew support package that works on the Touch Pro2?
I tried Eyron, PDAC, Paragon (LEng) and badnimits but non of them seems to work
With all of them I tried the basic support without UI translation but still no luck.
also looking...
for the hebrew support
Same, Need help =D...
Rbroudo and Coneman23.
add me at MSN
[email protected]
let's try and sort things out together...
OK, We have a winner !!! OSM is the man
After HR. I installed:
1) OSM Hebrew package
2) AEKMap for with the updated TP2 Hebrew layout for hardware keyboard support
3) Finger Keyb for Hebrew soft keyboard support
Almost everything is working great & the device response is hardly effected.
Two things I have noticed:
1) Known issue - Opera is showing Hebrew LTR
2) In text messages I receive sometimes digits are displayed in Arabic I guess this is font dependent
didn't get it, if you're looking for FREE hebrew - why check out eyron & pdac!?
anyway, I tried the PDAC with the registry changes I directed you to before at pocketpcfreak - and it WORKS !
second, just TODAY i recieved an email fro EYRON's support saying that you can download a trial version of hebrew FOR TP2 from their site.
wanna try it out ?
Yep why not
Tourist! said:
didn't get it, if you're looking for FREE hebrew - why check out eyron & pdac!?
anyway, I tried the PDAC with the registry changes I directed you to before at pocketpcfreak - and it WORKS !
second, just TODAY i recieved an email fro EYRON's support saying that you can download a trial version of hebrew FOR TP2 from their site.
wanna try it out ?
Click to expand...
Click to collapse
For those of us who don't read Hebrew so well, can you repeat the registry changes?
Thanks,
Michi
MichiK said:
For those of us who don't read Hebrew so well, can you repeat the registry changes?
Thanks,
Michi
Click to expand...
Click to collapse
yes, but gimme some time, i'll try to post it today.
and yuuvi, let us know how it goes...
Tourist! said:
didn't get it, if you're looking for FREE hebrew - why check out eyron & pdac!?
anyway, I tried the PDAC with the registry changes I directed you to before at pocketpcfreak - and it WORKS !
second, just TODAY i recieved an email fro EYRON's support saying that you can download a trial version of hebrew FOR TP2 from their site.
wanna try it out ?
Click to expand...
Click to collapse
Its not so much the "free" as finding a light Hebrew support.
Coming from the TYTN with its challenging memory configuration finding a light Hebrew support made HUGE difference.
Today even though the TP2 has much more memory I don't see a reason waisting it on something as basic as reading and writing in Hebrew.
ok, here we go... i'll try my best:
go to
HKLM/software/Tegic/eT9/XT9suportMSSip and change the value to 0
then, hop over to:
HKLM/system/currentcontrolset/control === here you need to change 2 values:
the first: layouts/e0010409/imefile change the value there to windows/compime.dll
the second: layouts text change the value there to COMP IME
reset and you're ready to go !
all credit to harvey from pocketpcfreak forum
hope all is clear...
I didn't find any TP2 version on Eyron's site.
And TBH, I dont give a **** ^^..
The free hebrew package that is offered above in this thread is way better, doesnt slow down your device, and is compatible with everything
=]
Yuuvi said:
I didn't find any TP2 version on Eyron's site.
And TBH, I dont give a **** ^^..
The free hebrew package that is offered above in this thread is way better, doesnt slow down your device, and is compatible with everything
=]
Click to expand...
Click to collapse
OK, here's the link:
www.pocketpc.co.il/license/secure/downloads/2006/MUI_TouchPro2.exe
hey, give a **** or not... you promised to try... ;-)
NOW, about the hebrew above a few questions:
any bugs ? (opera etc.)
any extras ? (hebrew manila ? hebrew contacts scroll bar ?)
what's the difference in memory consumption ?
rbroudo said:
OK, We have a winner !!! OSM is the man
After HR. I installed:
1) OSM Hebrew package
2) AEKMap for with the updated TP2 Hebrew layout for hardware keyboard support
3) Finger Keyb for Hebrew soft keyboard support
Almost everything is working great & the device response is hardly effected.
Two things I have noticed:
1) Known issue - Opera is showing Hebrew LTR
2) In text messages I receive sometimes digits are displayed in Arabic I guess this is font dependent
Click to expand...
Click to collapse
Wow. Just installed this on my TP2 and it works great!
Thanks!!!
Michi
Eyron Hebrew for TP2
OK, I installed it, it looked good at first, and is OK in general, BUT:
Caps shift/lock is disabled on hardware keyboard for english typing, and the cursor is a few spaces away from the place that it should be located when typing an email (again in english).
Now for people that don't use english a whole lot, these problems may not matter that much, but for me they do...
sjescott said:
OK, I installed it, it looked good at first, and is OK in general, BUT:
Caps shift/lock is disabled on hardware keyboard for english typing, and the cursor is a few spaces away from the place that it should be located when typing an email (again in english).
Now for people that don't use english a whole lot, these problems may not matter that much, but for me they do...
Click to expand...
Click to collapse
THIS IS EYRON RIGHT?
I use English 90% of the time so no good for me
sjescott said:
OK, I installed it, it looked good at first, and is OK in general, BUT:
Caps shift/lock is disabled on hardware keyboard for english typing, and the cursor is a few spaces away from the place that it should be located when typing an email (again in english).
Now for people that don't use english a whole lot, these problems may not matter that much, but for me they do...
Click to expand...
Click to collapse
also tried - i can confirm all of the above.
also - if you have the regional settings set to hebrew the eyron will not let any .net cf based apps work ! you must change to english.
btw- p.d.a.c have released a .cab file to fix the "fun" button problem with the hardware keyboard.
in short, seems the free hebrew support is better than the rest but does anyone know of fixes for the mentioned problems ? i.e opera ltr & arabic fonts instead of digits ?
Good for start...
Tourist! said:
didn't get it, if you're looking for FREE hebrew - why check out eyron & pdac!?
anyway, I tried the PDAC with the registry changes I directed you to before at pocketpcfreak - and it WORKS !
second, just TODAY i recieved an email fro EYRON's support saying that you can download a trial version of hebrew FOR TP2 from their site.
wanna try it out ?
Click to expand...
Click to collapse
Please, let me get the trial Hebrew support for TP2 and will see how to make it work!
pls, Download it from their site and make a RAR file for me for download at Rapidshare (or other download site...) and i will check it out...
Thanx In Advance!!
Tourist! said:
OK, here's the link:
www.pocketpc.co.il/license/secure/downloads/2006/MUI_TouchPro2.exe
hey, give a **** or not... you promised to try... ;-)
NOW, about the hebrew above a few questions:
any bugs ? (opera etc.)
any extras ? (hebrew manila ? hebrew contacts scroll bar ?)
what's the difference in memory consumption ?
Click to expand...
Click to collapse
It is NOT working (the link...) can you upload it by yourself for checking ?
Thanx
EYRON hebrew not good for htc touch pro2
hello members
i tryed to install EYRON heberw from there site, and all i see it green things on my htc pro2. so means its not working. and i buy it from EYRON.
they said they build the hebrew not for my rom only for oldest rom that came from newpan compay bring to israel.
so if you have new rom more then they have u cant install there hebrew.
im waiting for new EYRON version, or like they said install old rom they it will be good wich i will not do things like that.
so every one will think what to do.
your prince here
rbroudo said:
OK, We have a winner !!! OSM is the man
After HR. I installed:
1) OSM Hebrew package
2) AEKMap for with the updated TP2 Hebrew layout for hardware keyboard support
3) Finger Keyb for Hebrew soft keyboard support
Almost everything is working great & the device response is hardly effected.
Two things I have noticed:
1) Known issue - Opera is showing Hebrew LTR
2) In text messages I receive sometimes digits are displayed in Arabic I guess this is font dependent
Click to expand...
Click to collapse
Is there anyway of combining the FN key with another key for the AEK language toggle?
On my Touch Pro I was able to disalbe XT9 by the following reg keys
Turn off
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\compime.dll
Layout Text=COMP IME
To Turn on again
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\eT9Ime.dll
Layout Text=eT9 IME
With my TP2 it now longer works. I am trying to disable XT9 so I have the microsoft drop down for suggested words.
Does anyone have the setting for this? Sorry if this has been posted already, I searched around on Google and just found the technique for XT9 for models other than TP2 which don't work.
**EDIT**
Found my own answer...
Enable XT9
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0030404]
"Ime File"="M5ImeMgr.dll"
Disable XT9
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0030404]
"Ime File"="compime.dll"
Works on my Hong Kong ROM and may not work with other ROMs.
will this make XT9 persistently stay on and not be forgotten every time you close down that panel (for hw keyboard)?
dazkeirle said:
will this make XT9 persistently stay on and not be forgotten every time you close down that panel (for hw keyboard)?
Click to expand...
Click to collapse
Stays on for me and it actually works with the on screen keyboard too which did not work with the Touch Pro.
so the cab that dutty put together a while ago doesnt work on the tp2?
redd214 said:
so the cab that dutty put together a while ago doesnt work on the tp2?
Click to expand...
Click to collapse
If it was made awhile ago and not for TP2 then it will not work.
Would you like it in CAB format, can whip one up really quick.
yeah that would be awesome if you could, thank you!
redd214 said:
yeah that would be awesome if you could, thank you!
Click to expand...
Click to collapse
I would make a cab but some people have said that it caused problems by the dll file name being different in their ROMs. I am using Hong Kong ROM, what ROM are you using?
My XT9 not working now since in install Studio Kuma Chinese input CAB. I have a Hong Kong TP2 English Version and i need Chinese handwriting input. But since in install the CAB. I lost the standard XT9 and I no longer can input Chinese using anyone of the standard input method.
rcbear said:
My XT9 not working now since in install Studio Kuma Chinese input CAB. I have a Hong Kong TP2 English Version and i need Chinese handwriting input. But since in install the CAB. I lost the standard XT9 and I no longer can input Chinese using anyone of the standard input method.
Click to expand...
Click to collapse
Try this cab. It will return the registry settings for XT9 and input to default.
Hope it works for you.
Thanks At0mAng. I'll have a crack at your CAB. BTW, do you have the original TP2 Chinese handwriting CAB from your device?
rcbear said:
Thanks At0mAng. I'll have a crack at your CAB. BTW, do you have the original TP2 Chinese handwriting CAB from your device?
Click to expand...
Click to collapse
Do you mean the new EZinput? I am not Asian so I never use the Asian input. I believe there is a way to enter chinese characters by hand. I can try to CAB up the EZInput from my dump and see if it works.
Hi guys,
I really need your help with this:
I need a dialer which can search hebrew+english at the same time and a proper skin to go with it.
I think it's the only thing preventing my xperia from being perfect for me.
I'm running touch x 10.8 - which is a great rom (thank u MrRusch and smaberg) so i guess i'm looking for a smartdialer with hebrew for TF3D + a hebrew/english skin for it. I have pdac hebrew.
I allready tried phonex, it's a good dialer and other dialers - but it's killing my x1 and that's a damm shame killing such a great rom with 3rd party dialers who slow down everything.
I would really just like to add the smartdialing in hebrew function and put on a new skin with added hebrew letters.
I spent days trying to find something and tried all sorts of dialers+skins done in hebrew for other devices but they just won't work.
All i know is to install cabs :-(
can anyone plzzzzzzzzzz help - i'll be greatfull till i change my X1 and then some.
Hebrew Dialer
i know the feeling
i am having the same problem
i sent the PDAC support an e-mail with this request a few days ago, and still waiting for a replay
please keep this thread updated if you find a solution as i will do the same.
no news bad news
sorry - but still haven't found a solution :-(