ok i have been reading this forum alot to find out about certain modifications I can perform on my excalibur.....
is HKLM the same as HKEY?
in my registry editor all I have is HKEY ...
am i in the wrong place?
HKLM stands for HKEY LOCAL MACHINE
figures...
thanks, makes sense
Related
Hi everyone,
I have an XDA Exec and my current project is to customise my extended rom to install resco, magic button, some ringtones into the windows folder, batti and not have O2 Active (just dingo's connections cab). I have sorted the above, but now I would like to export my whole registry with just these applications installed, along with all my settings 9owner information, MSN, camera settings etc...) If I export the whole registry through Resco, can I then convert that into a CAB using WinCE CAB Manager or soething similar? Is it a good idea? How do I imprt a registry file successfully into WinCE, as I have tried it in the past with previous devices and never got anywhere. I would be extremely grateful for any help, even if its just someone telling me not to bother wasting my time if it won't work!
Cheers,
Fin
WinCE CAB Manager will allow you to make a cab from a reg. However, there are limitations I think, and whether it's wise to do the whole reg is another question. Some of it is volatile. If you pick and choose relevant user settings, you should be safe.
V
vijay555 said:
WinCE CAB Manager will allow you to make a cab from a reg. However, there are limitations I think, and whether it's wise to do the whole reg is another question. Some of it is volatile. If you pick and choose relevant user settings, you should be safe.
V
Click to expand...
Click to collapse
D'oh! I just found out the hard way that importing your whole registry doesn't work for quite a few reasons! Thanks for your reply, I still can't work out CAB manager though. Is there anything particular you have to remember when importing a REG file into a CAB?
There's some issue I read somewhere that it breaks some lines or something in the imported reg. Not sure how or why...
I'd suggest just get the relevant sections, control panel, software, gwes etc... you'll have to glance through your whole reg, try it in individual sections, then compile the lot into one functional bunch.
V
i have been using WinCE cab manager a lot and i have found that importing small sections of 'code' is more reliable than huge chunks, and i have used this methood succesfully to create customised cab file settings (see my theme+ringtone+dialler post) where i extracted parts of the registry and posted into WinCE cab.
thanks
I've used many other roms, including Vp3Gs' and lvsw, but the "BLACK" roms are the only ones that enable me to log into my Wells Fargo because all other go to the page where it says that the IE is not compatible... is there any reason this happens? is there any ways to fix this on other roms?.. thanks
google user agent string
then find out how to change it in pocket ie. its a reg hack
I second this. You change that string and you can do the same on any ROM.
Proxy setting
I have 'disabled' proxy setting, and this has allowed me to use IE.
Hope this helps!
there was/is a app out there that basicly hides the fact that you are using a phone to acces the web i think it was tweak lite??? this was from a while back in the wm2003 days so i am not sure it is still around.
i stopped using my phone for heavy web browsing a while back and lost the cab for it. seemed like all it was is a reg hack.
maybe you can get one of the fantastic cooks around here to slap one together.
or buy opera i hear that it also does the same thing.
Buy Opera
If you get the paid for version of Opera, you can change it to identify itself as the "Desktop Version". This works well for me on the UK's National Rail website, which insists on giving me the rubbish cut-down version.
Well I've tried the desktop association with Opera, but I still can't access my online account with Wellsfargo because it is not a supported browser... I tried the user agent hack from WM5, but it won't work with WM6.. anyone out there... JJ? care to enlighten?
Changing the PIE User Agent is not as simple as a regedit anymore. The later builds of WM5 and all WM6 builds have the User Agent hard coded into the browser.dll in the \Windows folder. The User Agent string in the registry is now only for OEM's / Telco's to add any specific customisations.
The only way to edit the full User Agent string is to hex edit the browser.dll. If you search across all the Hermes forums (not just Wm6) there are numerous posts covering the topic.
Cheers
EDIT: Thanks for the below update PAPPL, seems my info was a bit out of date
Download "Schaps Advanced Configuration 0.9" here at xda-devs.
There you can simply change the User Agent in a User Interface!
The new WM6 Builds do have a UserAgent registrykey again. It's called "CustomBase"
Schaps Tool replaces this string.
browser.dll doesn't need to be hexedited anymore for WM6!
Only WM5 Aku3.x+ needs hexediting!
Thanks.. PAPPL.. I'm using schaps rom and have just been living with the fact that I can't do it..
Would I just have to change where it says Mozilla/4.0 to MSIE 6.0?
sry, but I browsed around and that all that had to be done with the registry but it doesn't seem to work with the advanced config tool... maybe I need to change the whole string to something else?
PAPPL said:
Download "Schaps Advanced Configuration 0.9" here at xda-devs.
There you can simply change the User Agent in a User Interface!
The new WM6 Builds do have a UserAgent registrykey again. It's called "CustomBase"
Schaps Tool replaces this string.
browser.dll doesn't need to be hexedited anymore for WM6!
Only WM5 Aku3.x+ needs hexediting!
Click to expand...
Click to collapse
So the "custombase" is a reg key? Where?
Jas - if you're still crusing by here... this would be a useful customisation in your Pimp toolset....
wpbear said:
So the "custombase" is a reg key? Where?
Click to expand...
Click to collapse
WM5 (max. AKU2.3): [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Internet Settings\5.0\User Agent] Default="Your Useragent String"
WM6: [HKLM\Security\Internet Explorer\User Agent] Custombase="Your Useragent String"
http://www.fiddlertool.com/useragent.aspx
Your string is shown in IE/PIE (User Agent:...)
PAPPL said:
WM5 (max. AKU2.3): [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Internet Settings\5.0\User Agent] Default="Your Useragent String"
WM6: [HKLM\Security\Internet Explorer\User Agent] Custombase="Your Useragent String"
http://www.fiddlertool.com/useragent.aspx
Your string is shown in IE/PIE (User Agent:...)
Click to expand...
Click to collapse
Thanks, I have been using a really old browser.dll to get CV to work guess I can stop doing that now.
Still doesn't work properly
I've done the registry change in CustomBase, but it still doesn't fix the problem
Useragentstring.com still reports my browser as Windows CE and I still get the WAP crap on some sites.
Using Opera set to "Desktop" fixes it, although Opera has other compatibility issues -and it's not compatible with my wallet.
WM6 is obviously still reading either the "Platform" setting in the WM5 key area, or it's doing something else equally creative.
I think the browser.dll hack is the only thing that is going to fix it, at this stage, anyway.
Anyone with any other ideas?
hi guys,
Will u please enlightened me how to hide some particular application(s) list (without uninstalling) in add/remove programs in wm6.1 through registry.
thanks.
regards,
tejen
Yes I'd like to know too. When there is an error in the uninstallation process; the program can be removed from the list without actually being removed. There must be a way...
on pc's the items in the add/remove prog list mirros a list in the registry
if the same goes for pda's it's just a matter of removing that entry
Rudegar said:
on pc's the items in the add/remove prog list mirros a list in the registry
if the same goes for pda's it's just a matter of removing that entry
Click to expand...
Click to collapse
right!! it's in the registry, but actually I can't figure out it in wm6. For wm2003se it is in
HKLM\Software\Apps\particular program name\
- for hiding the reg_dword value of "Instl" should be 0 to enable it again it should be 1.
But it doesn't make any difference in wm6.1 !!
Does anyone know where is the list of Add/Remove in WM6.1 registry???
Bump for someone who knows the answer to this!
It's in one of the data stores, and those are AFAIK undocumented. I wrote an app once to remove something from the list but it was tricky. I'm not sure, but one of the tweak tools (I think SKTools) can do this as well.
Ahm yes, I looked at my old code, this is what you need to remove:
HKLM\Security\AppInstall\<AppName>
HKLM\Software\Apps\<AppName>
And here comes the tricky one: the installation record in mxip_swmgmt.vol, which is tricky. See CeMountVol in MSDN.
We all believed that we can improve some of our devices by tweeking the registry. Why dont we all share our knowledge and at the same times will make our self understand more of winmobile registry. And as usual proper precaution must first be taken.
Read the section tweaking the hermes registry in wiki
Thanks in advance, I am lost what is it? Where do I find it and what are all the tweaks i'm reading regarding this do for my diamond...HELP? touchflo configuration can't run tweaks do to the HKLM/??????
A simple search is all it takes; anyhow, find a registry editor like PHM or Resco and use that.
Thread closed.