Related
hi all
i have artemis with bb 3.7 but i have problem while i try to use pc connection for my artemis...
i connect it and syncronize...in active sync i allowed internet connection for pda...
but when i use IE to open a websyte it says ERROR 0x80072f78
how to use it?
Try running this file
Its a reg fix for activesync that sorts out the activesync pass thru problem
If you are using ActiveSync 4.2 and have a problem with Desktop Pass-through it may be caused by a Layered Service Provider (LSP) that use the Windows TCP/IP stack. This has been known to occur with ISA Server. The registry file LSPValue.reg will reverse this setting. Microsoft and the Pocket PC OEM does not support users that edit the registry.
DVS-SkrewBall said:
Try running this file
Its a reg fix for activesync that sorts out the activesync pass thru problem
If you are using ActiveSync 4.2 and have a problem with Desktop Pass-through it may be caused by a Layered Service Provider (LSP) that use the Windows TCP/IP stack. This has been known to occur with ISA Server. The registry file LSPValue.reg will reverse this setting. Microsoft and the Pocket PC OEM does not support users that edit the registry.
Click to expand...
Click to collapse
thx a lot dear now it works with the reg file
thx thx thx thx finally i complete my search with this use full post
thanx buddy
Bloquage au bort de dearrage, aider moi s.v.p
bonjour, j'ai un ARTEMIS, il est bloqué au moment de démarrage, et le PC ne le détecte pas, si vous avez une truck pour m'aide. ([email protected])
Same problem with me too, dear friends. I get error code 0X80072f78 whenever I use shared internet in my mobile. How can I make it work?
Thank You!
F.A.Q: PLEASE READ IT BEFORE POST YOUR QUERY
When you flash a new ROM, you will loose all your data!!! take this in consideration. So, you will make a full reinstallation of all your personals applications
1: I don't have "data disconnection and timer" in the taskbar and "beam" (IR) in the Comm Manager.
If you don't see keys on dialer or you don't have the data disconnect in taskbar and the beam (infrared) in the commmanager that's because you used the schap's advanced configuration.
to enable both again go to programmes\Outils\Config. avancée go to connections tab and check "GPRS\3G disconnect and timer" then in comm manager tab assign "beam" to Button 10, check that "show video dialer" in phone tab is checked.
take care when you used advanced config for the first time, to verify this things before saving.
2: ROM update Error: see very well made colrou's page about this HERE (in french)
-Use XP not Vista
-If you're stuck on bootloader (three colors screen showing IPL: SPL: ), start again update app without removing USB or restart the Phone
3: Startup animation:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StartupAnimation]
-pour la désactiver totalement, mettre "Enabled"=0
-pour désactiver le volume mettre "Volumn"=127
4: Backup (SPB, Sprite Backup, ...):
Never restore a FULL backup from another rom version. (backup from mine previous version too). it'll overwrite system files which are not compatible with new release.
5: How to avoid the automatic MMS connexion to the 3G network?
1/Menu Démarrer>Messagerie>Menu>Options>MMS and uncheck "Récupérer messages immédiatement"
2/in HTCHome plugin, click on "select your city">Menu>weather options> uncheck "download auto. data"
6: I can't enable the "favorites" tab after cube's installation:
to enable it:
in registry: [HKLM\SOFTWARE\OEM\MASD] delete "QuickDial" key
7: I lost my connexions parameters (wifi, 3G)
It's a known issue, that comes from the bad XIP of Official dopod release, used "ALWAYS" POWER OFF (hardware top right button) instead of soft reset.
8: I can't send or receive MMS.
Setup operators has probably set bad or incomplete parameters.
Check you configuration settings, ask your provider for the right settings if you don't know them.
9: I can't sync or see my device with vista.
1/ Used WDMC 6.1 (Windows Mobile Device Center)
2/ In Démarrer/Paramètres/Connexions "USB vers PC" uncheck the option.
CAB
CAB:
Windows_Live_10.6.33.0600_FR_Google.cab
Cyberon_VSD_1_2_070917_FR.CAB
HTC_Audio_Manager_1_2_919713_FR.cab
Adobe_ReaderLE_2_00_288531.cab
Adobe_Flash_Player.cab
Esmertec_Java_20070802.2.1.cab
Pim Backup 2.5
Office_Mobile_6.1_FR.cabNew Official Version + optimised + update Onenote to .1055 version
HTC_Audio_Booster_FR.cab
Transcriber_2.0_FR.cab
TaskManager_2.8.0.1_FR.cab
OneNote_12.0.4518.1055_FR.cab
HTC_Streaming_Media_Player_2_20_920_722_FR.cab
AltTab_FR.cab
HTC_Album_1_0_822_716_FR.cab
HTC_Random_Access.cab
Infos_GPS_FR.cab
ArcSoft_MMS_4.2.8.1_FR.cab
HTC_Home_v2.1.1005.722_FR.cab
HTC_Gif_Animation_v1.10_FR.cab
FTouchFloCubeFRv3.cab
F.A.Q.
A french WM6 rom for Trinity
Version 4.03
Thanks to bepe, Jasjamming, Tadzio for all.
Thanks to LVSW and mUn for their always great work.
Thanks to Ervius for his help and his great tool Packages creator.
Thanks to Ausdim for his help, fixes and teaching
Thanks to Olipro and Des for HardSPL
Thanks to Schap's for his Tools
A big thanks to Colrou, Ilos and Filicloe for their help, ideas and tests...
Thanks to Aje_fr for his tools and support
!!!!!!!!!!!!!OS + HardSPL!!!!!!!!!!!!!!!
!!!!!BEFORE UPGRADE, PLEASE REMOVE SD CARD!!!!!
Code:
What i did:
v4.03 Full:
OS 5.2.1948 Build 18548.0.7.2
Added:
removed:
Updated:
Fixed:
+...
4.00 Light version: (soon)
4Mb Pagepool
Updated: some dll.
REMOVED: All
VERSIONS:
Download 4.03 Full
Download 3.6 Light
Download 4.03 Full & 3.6 Light (Colrou's Mirror)
+ Old Versions, Radios, FAQ, and more...
Download 4.03 Full & 3.6 Light (Ilos's Mirror)
+ Old Versions, Radios, Fix, and more..
Radio 1.50.08.11 GPS
IF YOU APPRECIATE MY WORK YOU CAN MAKE A DONATION HERE...
ROM UPDATE
ringtone plugin: execute the "set as ringtone" with the files anywhere, it will be automatically copy to the ringtone folder.
4.00 SP1
fix:
HTCHome.dll bad version
unable to play audio files type .aac, .mid, ...
add:
support for .qcp audio/rongtone files.
Download
PS: "set as ringtone" will be language fixed in the next release because i release a neutral patch.
Can't wait ....!!!!!!!!!!!!!!!!
I too can not wait
Hi !!
Hello,
I wanted to thank you for your work,
I stayed in the 2.4 to a problem of compatibility with Tomtom (I am not V6.3).
But just install 3.6 on the trinity of my brother and he is very happy.
I do not have the intuitive writing across the screen you know what this is?
Je voulais vous remerciez pour votre travail,
je suis resté en 2.4 pour un probleme de compatibilité avec Tomtom (je n'ai pas la V6.3).
mais vient d'installer la 3.6 sur le trinity de mon frere et il en est très content.
Je n'ai plus l'ecriture intuitive sur tout l'écran vous savez à quoi c'est du?
I want it... I need it...
New version
v4.00 released
Great Works ! Thank you very mutch !
Thanks for your great ROM
But a bug !
in the Keyboard with big keypad, number is incorrect
ex: 1->& , 2->é ....
Thanks a lot dude !!! great job (as usual !!)
Thx a lot...download in progress
Installed...nice new loggon screen
Big tanks for you
Great job as usual
Thank you FAMAN and all contributors for this brand new version.
A major update according to version number.
Updating right now... let you know if everything's OK
Pierre
Tested for 2hours...it seems to be faster than the previous one!
Great job Faman!
mirror updated :
http://faman.jicay.fr
enjoy and good upgrade
Very good Job Faman
Faman_FR_3.6_Light_Trinity.exe 49.21 MB
Faman_FR_4.00_Full_Trinity.exe 47.22 MB
The full 4.0 is lighter in Mb ?
Dear forum members,
This is the new Mio A701 FRENCH WM6.1 CEOS 5.2.19212 Build 19212.1.0.3 Mobile Vista 1.00 Premium Rom.
It is a world wide first for Mio A701 and i hope more languages to be launched soon.
The CE image is based on the Official WM6.1 CE OS 5.2.19212 ( Build 19212.1.0.3 ).
It was a tremendous work and you will best support me if you download from the provided links.
I hope this soft step to be a hard lesson for Mitac, its after sales policy and development services.
The specific details of this rom are as follows:
< Start Menu > function is provided the world wide first (wwf) in A701 to the bottom left hardware key ( under phone key ).
< TomTom Navigator > function is provided to the bottom right hardware key ( under power key ).
<French WkTask > function is provided to the top right of navigation bar.
Cyberon Voice Speed Dial is ported and is rom embedded.
The A701 icon is enabled when you synchronize in Windows Vista as well as the folder Mio A701 of synchronization.
PremiumVista.tsk and phone dealer have been redesigned in the cool blue colors of this Mobile Vista Premium edition.
The versions of the applications included inside the rom are as follows:
1. Data Backup : 3.10 (Build 21366) of High Tech Computer Corp.
2. Windows Live : 10.6.0034.0800
3. Windows Media Player : 10.3 Build 19212
4. Office Mobile : 6.1
5. Task manager : 2.9
6. Total Commander (French): 2.5
7. WiFi scanner : 1.5
8. WkTask (French) : 1.2.0.0
A. Screens of the French Mobile Vista 1.00 Premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
>
>
B. Download Link
Rapidshare:http://rapidshare.com/files/1719800....1.0.3_Mobile_Vista_1.00_Premium_by_ansar.zip
C. Instructions to successfully flash the rom CE image
Here bellow are the instructions to successfully flash it.
Unzip the downloaded file:
Mio_A701_WWE_WM6.1_CEOS_5.2.19212_Build_19212.1.0.3_Mobile_Vista_1.00_Premium_by_ansar.zip
and in the created directory you will have the following:
1. This readme.txt file
2. The VistaLibFRE19212 directory with the subdirectories:
a. CabACarteDeStockageProgramFiles, that include:
- LiveSearch.cab Version 10.6.0034.0800
- VisualGPSce.cab Version 1.2.106
b. CabAWindows, that include:
- ArcsoftMMS.cab Version 4.2.8.1
- Backup.cab (PIM) Version 2.8.0.0
- Navigator.cab Version 6 (TomTom)
- S2U2.cab Version 1.18
c. FichiersAWindows, that include:
- Black_Vista.tsk -
- Mobile_Flare.tsk -
- XCPUScalar.cpl Version 2.96
- XCPUScalar.exe Ditto
- XCPUScalal.lnk Ditto
d. The control xml files:
- SDFileOperation.xml
- SDLinkRemove.xml
- SDRegistry.xml
3. The control text files:
- SDConfigFRE19212MVP1_00.txt
4. The CE image file: Mio_A701_WWE_WM6.1_CEOS_5.2.19212_Build_19212.1.0.3_Mobile_Vista_1.00_Premium_by_ansar.bin .
Before flashing make a backup of your files in Storage Card using the Data Backup Program from my previous roms or your favorite backup.
In case you do not have a backup application install the Backup.cab (is PIMBuckup) found in VistaLibFRE19212MVP1_00 directory.
After PIMBackup installation perform your data backup in your Storage card.
Select SDConfigFRE19212MVP1_00.txt and rename it to SDConfig.txt .
Place the VistaLibFRE19212MVP1_00 directory and SDConfig.txt a la Carte de stockage and Power off.
Place Mio_A701_WWE_WM6.1_CEOS_5.2.19212_Build_19212.1.0.3_Mobile_Vista_1.00_Premium_by_ansar.bin
in a directory of your desktop or Portable PC and proceed as follows:
a. Set your Mio A701 in boot loader mode by holding down Volume Up + Navi down + reset buttons and
After 4 seconds (for me is ok in 0) release Volume Up + Navi down first and then release the reset button.
In the ScoterUT Rxx Magneto screen menu select FlashROM Upgrade and press Navi center button.
In the next FlashROM Upgrade screen menu select the CE img by USB option.
b. Connect your Mio A701 to your desktop or portable PC with Activesync 4.5 setting: Allow USB connections not checked.
Note: It is difficult to flash in a Vista OS on desktop or Portable PC.
I recommend a desktop or Portable PC with XP as maximum.
c. Run ScoterRomUpdate-R01.exe on PC or Portable PC and follow the instructions.
d. After the successful flashing select in Mio A701 exit and Enter deep sleep or Watchdog reset (in UT 55).
Important note: Do not flash in UT51 or you may get into flashing errors.
e. Unplug the USB wire and perform a hard reset by holding down Volume down + power on buttons. (Not required in UT55)
The Rom loading process will perform as follows:
a. Loads all splash screens, performs the welcome screen, displays the initial Today screen and
b. Then loads premiumVista.tsk theme.
The User Customization process initiates as follows:
a. Loads all cabs from internal rom and VistaLibFRE19212MVP1_00.
Note: the majority of cabs are modified by me in order to go to the desired destination.
b. Loads the *.xml files and performs the instructions included in these files.
c. The process will finish after machine's final Reset and final boot.
e. Again Is one of the best roms ever made and during testing i never made a reset.
Note 1: The keyboard layout has options for small and big letters.
It is predefined to initial setup in small letters. In case of big, the CAPs are displayed with double tap on shift key.
Note 2: The key of media player is assigned to Start Menu for better performance.
Pressing once you get Start Menu and pressing again Start Menu is hidden.
Note 3: The navigation key is assigned to TomTom Navigator application.
Note 4: RegEdit (the one part of task manager) and Total Commander in French is assigned in the screen bottom left and right locations.
Note 5: As you already noticed the Premium.tsk theme is redesigned as cool blue.
Note 6: Internet explorer has two new home screens.
The first has help, IE Home, Mio Home and Xda Developers.
If you tap on IE Home the well known IE screen is seen.
When you tap on menu>tools>options you can set the current, IE home as home page.
You can always go back to the first page from menu>tools>options and setting use default.
Note 7: The bottom screen plug-in has five small buttons where from left to right you can have:
- The GPS ephemeris activation
- The memory
- The Bluetooth
- The Icon only for battery charge view. For the settings there is the top bar battery button.
- The screen rotation button.
- In case of XCPUScalar enabling, you have three more as XCPU, Suspend and Reset.
Note 9: Today screen includes Tomtom Navigator that runs without problem from there.
Note10: S2U2 is running automatically i made it bug free.
D. Rom Structure
The Rom Structure is close to WWE and for its details see next post.
E. Important Notes
I use Vista for all rom projects, but Windows Mobile Device Center must be of version 6.1.6965 .
I moved my A701 in official R65 and UT55 and i had no problems with flashing.
Once again i comment that if you flash under UT51 you may have flashing problems.
So do not change from your R65 if there is no good reason for this.
You may have serious problems, even to brick your device, when downgrading to R48.
Till next version enjoy!!!
Regards, ansar
_________________
Mio A701
UBoot R48
CE image WM6.1 FRE CE OS 5.2.19212 Build 19212.1.0.3 Mobile Premium Vista 1.00
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a
A701 FRENCH CEOS19212 Build 19212.1.0.3 STRUCTURE
This is the structure of Mio_A701_FRE_WM6.1_CEOS_5.2.19212_Build_19212.1.0.3_Mobile_Vista_1.00_Premium:
***************
OEM
***************
->ExtendedPKG
->LangDB
->NEWAPPS
->NEWDRIVERS
->OEM_DPI_96
->OEM_DSM
->OEM_Lang_040C
->OEM_Modem
->OEM_USB
->OEMAPPS
->OEMDRIVERS
->OEMDRIVERS_040C
->OEMMISC
->OEMOPERATORS
->OEMVERSION
->OEMXIPKernel
->OperatorPKG
->OperatorPKG_PT
->SecurityOff
OEM.cer
***************
SYS
***************
->.ROM
->.VM
->Ansar Tweaks
->AutoRunCFG
->AUTOUPDATE
->Autoupdate_Lang_040C
->Backup
->Base_DPI_96
->Base_dpi_96_resh_240_resv_320
->Base_Lang_040C
->Base_Lang_040C_DPI_96
->Base_Lang_040C_DPI_96_RESH_240_RESV_320
->BaseApps
->BaseAppsFiles
->Bluetooth
->Bluetooth_Lang_040C
->BROWSING
->Browsing_DPI_96
->Browsing_Lang_040C
->BROWSINGCORE
->BtCrawler
->BTDUN
->Bth_A2DP
->Bth_A2DP_Lang_040C
->Bth_HID
->Bth_HID_Lang_040C
->Catalog
->Catalog_Lang_040C
->CommonNonEA
->DLAgent
->DRM
->Enterprise
->Enterprise_DPI_96
->Enterprise_Lang_040C
->Enterprise_Lang_040C_DPI_96
->Entertainment
->Entertainment_DPI_96
->Entertainment_Lang_040C
->Entertainment_Lang_040C_DPI_96
->FWUPDATE
->Fwupdate_Lang_040C
->GPSID
->INTERNETSHARING
->IPSECVPN
->IPSECVPN_DPI_96
->IPSECVPN_Lang_040C
->MediaOS
->MediaOS_dpi_96_resh_240_resv_320
->MediaOS_Lang_040C
->MediaOSFiles
->Metadata
->MSXIPKernel
->MSXIPKernelLTK
->NetCF
->Office
->Office_DPI_96
->Office_Lang_040C
->Office_Lang_040C_DPI_96
->OneNote
->OneNote_lang_040C
->OS
->OSFiles
->Phone
->Phone_DPI_96
->Phone_dpi_96_resh_240_resv_320
->Phone_Lang_040C
->Phone_Lang_040C_DPI_96
->PhoneRedist
->PhoneRedist_DPI_96
->PhoneRedist_Lang_040C
->PhoneRedist_Lang_040C_DPI_96
->Pocket Screen Capture
->ppgprov
->Redist
->Redist_DPI_96
->Redist_dpi_96_resh_240_resv_320
->Redist_Lang_040C
->Redist_Lang_040C_DPI_96
->RUNTIMES
->Shell
->SIM_TKit
->SMIME
->SMS_Providers
->SQLCE
->SqlCeMobile
->SqlCeMobile_Lang_040C
->SQM
->Srs Wow HD
->Transcriber
->Transcriber_Lang_040C
->Transcriber_Lang_040C_DPI_96
->Vista Driven
->Vista Themes
->WelcomeCenter
->WelcomeCenter_Lang_040C
->WinCENLS_WWE
->WindowsLive
->WindowsLive_DPI_96
->WindowsLive_Lang_040C
->WkTask_040C
->WWAN
Regards, ansar
_________________
Mio A701
UBoot R48
CE image WM6.1 FRE CE OS 5.2.19212 Build 19212.1.0.3 Mobile Premium Vista 1.00
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a
Package Tool Preview
Hi,
This is what you get from PKGTool.exe
[Core OS]
Windows Mobile-based Pocket PCs
[Versions]
OEM: 5.2.0.203
SYS: 5.2.19212.1000
NET: 2.0.7045.0
SYS: 5.2.19212.1003
SYS: 5.2.19202.1000
[Language]
040C - French (France)
[DPI]
96
[Certificates]
CN=OEM_UpdateCert
CN=MiTAC001
CN=OEM Sign 2005
O=MiTAC Root Certificate Authority
O=MiTAC Root Certificate Authority
CN=Microsoft Corporation CE Image Update Test - Root
CN=Microsoft MDD Dogfood CA - MS Root
CN=Microsoft Windows Mobile PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
[Missing Manifests]
Regards, ansar
_________________
Mio A701
UBoot R48
CE image WM6.1 FRE CE OS 5.2.19212 Build 19212.1.0.3 Mobile Premium Vista 1.00
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a
First Test
Hi Ansar!
I am very happy to find this Rom! This is exactly the kind of rom I was looking for
At the moment I did not have the time to test a lot of things but so far, here are the issues I faced :
-Just after having my device flashed, Windows asks to tap the screen to begin the configuration. As I was busy at work at that moment, the device turned automatically in "stand by mode" by turning the screen off.
I tapped the screen to reactivate it. The screen appears...still asking me to tap it but no reaction from the device when I tapped the screen again...=> Soft Reset and I configured the device directly when asked => Ok
- S2U2 : When I touch the screen to unlock the pda with the scrollbar : My screen goes crazy displaying multicolor lines => Soft Reset or I have to desactivate it at first start with "iLock2" icon.
- Programs/Apps/S2U2 Settings => Blank Screen and Pda Frozen. I need to soft Reset.
- Programs/Apps/S2U2 => My screen goes crazy displaying multicolor lines => Soft Reset
- The second Splash Screen is not ready for Landcape Mode (not a real problem)
- VisualGPSce error message when starting : Could not initialize communication buffer size.
- VisualGPSce is sometimes not lauching (the "waiting Icon" is turning forever or it launch then it freezes) => Soft Reset
- VisualGPSce is sometimes the correct Icon is not even showing, it shows a default application icon => Soft Reset
-GPS: I use IGO8 and it can not find any Gps Device. The Gps device was running on com4 on my previous Rom (Mio official 65 FR)
.
But Maybe I use it the wrong way since Visualgpsce is installed.
Because yesterday, after lauching VisualGpsCe and connected it to Com4, IGO8 finally found my Gps device...
Today it was ok with com 2 and now my IGO8 seems to have disappeared from the system. I mean that the Icon is not in "programs" anymore...
I also have other problems with IGO8 but maybe those problems are not related to this Rom...
May be IGO is not fully compatible with WM 6.1 ? I also have a problem with my Belgium map wich is not recognized (it was working fine in my previous rom). all other maps are correctly recognized by Igo8...Unfortunately...I Live in Belgium lol
If you have questions or tests you want me to do, I am at your disposal
Mystral said:
Hi Ansar!
I am very happy to find this Rom! This is exactly the kind of rom I was looking for
At the moment I did not have the time to test a lot of things but so far, here are the issues I faced :
-Just after having my device flashed, Windows asks to tap the screen to begin the configuration. As I was busy at work at that moment, the device turned automatically in "stand by mode" by turning the screen off.
I tapped the screen to reactivate it. The screen appears...still asking me to tap it but no reaction from the device when I tapped the screen again...=> Soft Reset and I configured the device directly when asked => Ok
- S2U2 : When I touch the screen to unlock the pda with the scrollbar : My screen goes crazy displaying multicolor lines => Soft Reset or I have to desactivate it at first start with "iLock2" icon.
- Programs/Apps/S2U2 Settings => Blank Screen and Pda Frozen. I need to soft Reset.
- Programs/Apps/S2U2 => My screen goes crazy displaying multicolor lines => Soft Reset
- The second Splash Screen is not ready for Landcape Mode (not a real problem)
- VisualGPSce error message when starting : Could not initialize communication buffer size.
- VisualGPSce is sometimes not lauching (the "waiting Icon" is turning forever or it launch then it freezes) => Soft Reset
- VisualGPSce is sometimes the correct Icon is not even showing, it shows a default application icon => Soft Reset
-GPS: I use IGO8 and it can not find any Gps Device. The Gps device was running on com4 on my previous Rom (Mio official 65 FR)
.
But Maybe I use it the wrong way since Visualgpsce is installed.
Because yesterday, after lauching VisualGpsCe and connected it to Com4, IGO8 finally found my Gps device...
Today it was ok with com 2 and now my IGO8 seems to have disappeared from the system. I mean that the Icon is not in "programs" anymore...
I also have other problems with IGO8 but maybe those problems are not related to this Rom...
May be IGO is not fully compatible with WM 6.1 ? I also have a problem with my Belgium map wich is not recognized (it was working fine in my previous rom). all other maps are correctly recognized by Igo8...Unfortunately...I Live in Belgium lol
If you have questions or tests you want me to do, I am at your disposal
Click to expand...
Click to collapse
Hi,
There is a time limit after boot from a hard reset.
You must go again after a HARD RESET (not a soft reset) and let the device to take all steps up to final reset by itself.
Thanks for commenting and waiting for your next report.
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.20755 Build 20755.1.0.0 Mobile Vista 3.00 Premium
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a
Yesterday I had a phone call and my friend told me that the volume of my voice was low.
I know there is a tweak to boost the microphone level of the phone.
I don't remember how but I have seen it somewhere in another forum.
I just saw your answer above.
Ok, I will install the rom again and do like you said.
Thanks for the help
Mystral said:
Yesterday I had a phone call and my friend told me that the volume of my voice was low.
I know there is a tweak to boost the microphone level of the phone.
I don't remember how but I have seen it somewhere in another forum.
Click to expand...
Click to collapse
Mystral said:
I just saw your answer above.
Ok, I will install the rom again and do like you said.
Thanks for the help
Click to expand...
Click to collapse
Hi,
I do not had such low phone volume, may be was the bad install.
Thanks for commenting.
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.20755 Build 20755.1.0.0 Mobile Vista 3.00 Premium
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a
Hi,
From the download point of view it seems that something is moving ...
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.20755 Build 20755.1.0.0 Mobile Vista 3.00 Premium
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a
Hi,
Here is my second report for this rom :
So I re installed the rom correctly last friday.
The automated installation successfully finished and everything was working fine.
I had access to S2U2 settings.
I was able to unlock the phone after a standby.
My Gps software (IGO8) was working fine
The rom was fast.
The bluetooth is working better ! The quality of sound is much better and louder when I connect it to my Sony bluetooth car audio (MEX-BT 3600).
And the best thing is that my Mio can stream my Gps voice or my music to the Bluetooth audio channel (insted of bt phone channel) which means that the phone channel is still free and automatically switch to when I receive a phone call and then, automatically switch back to my gps voice
I love the fact that when I close a program it closes for real and not only minimize as before.
Aero Black skin is very nice looking
But unfortunalty...some hours later...my device had again multiple frozen screens due to S2U2. so I had to uninstall it.
Yesterday, my IGO8 software icone was absent again from the program list.
I had to reinstall it (it says it is already installed...) to have the launching icon again.
The only negative thing with bluetooth is that the voice of my Gps is cut from times to times...the voice seems to struggle...it sounds like there is no cpu or memory ressources enough to speak and brodcast to bluetooth (I dont have the problem when listening to mio external speaker).
It is like : Turn le le leeef...fft, then follow the st st strreee...t for 20 meterss...sss.. (I am exagerating a bit)
I did not have this problem before when I was using the little program "BTAudioToggle" to stream all the sounds from mio to a BT device
The rest is working fine.
Questions :
Where do I have to put Tomtom maps to be able to use it ?
What Tomtom version is it ?
Again, thanks for your good job ansar!
Mystral said:
Hi,
Here is my second report for this rom :
So I re installed the rom correctly last friday.
The automated installation successfully finished and everything was working fine.
I had access to S2U2 settings.
I was able to unlock the phone after a standby.
My Gps software (IGO8) was working fine
The rom was fast.
The bluetooth is working better ! The quality of sound is much better and louder when I connect it to my Sony bluetooth car audio (MEX-BT 3600).
And the best thing is that my Mio can stream my Gps voice or my music to the Bluetooth audio channel (insted of bt phone channel) which means that the phone channel is still free and automatically switch to when I receive a phone call and then, automatically switch back to my gps voice
I love the fact that when I close a program it closes for real and not only minimize as before.
Aero Black skin is very nice looking
But unfortunalty...some hours later...my device had again multiple frozen screens due to S2U2. so I had to uninstall it.
Yesterday, my IGO8 software icone was absent again from the program list.
I had to reinstall it (it says it is already installed...) to have the launching icon again.
The only negative thing with bluetooth is that the voice of my Gps is cut from times to times...the voice seems to struggle...it sounds like there is no cpu or memory ressources enough to speak and brodcast to bluetooth (I dont have the problem when listening to mio external speaker).
It is like : Turn le le leeef...fft, then follow the st st strreee...t for 20 meterss...sss.. (I am exagerating a bit)
I did not have this problem before when I was using the little program "BTAudioToggle" to stream all the sounds from mio to a BT device
The rest is working fine.
Questions :
Where do I have to put Tomtom maps to be able to use it ?
What Tomtom version is it ?
Again, thanks for your good job ansar!
Click to expand...
Click to collapse
Hi,
I usually do not change S2U2 settings and never had problem. What specific settings did you apply ?
I did not test iGo yet but after today or next day finishing with the German rom i will.
Is your iGO working from Carte de stockage or Storage card ? Can you see with Total cmd if there is Storage card folder in your device ?
When you install iGO do not change manually the shortcut from the location the cab installed it.
If you want another shortcut make a copy with total cmd from the installed one to the desired location, do not move it.
Delays in GPS may result when covering or signal is not so good.
TomTom is verion 6 and i have maps, let's say Roma, in Carte de stockage\My Documents\Roma. It shouild be found automatically.
Waiting for more report, thanks for commenting and supporting.
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.20755 Build 20755.1.0.0 Mobile Vista 3.00 Premium
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a
Topic Moved to Upgrading, Modifying and Unlocking
Hi,
Yesterday, the device freezed while using Gps.
I wanted to do a soft reset and when the device rebooted I had this message :
Updating...
Don't remove your SD/MMC Card
Image not found.
Press any key to continue...
Pressing any key did not exit this message.
I had to do a hard reset because each time I did a soft reset after this message, The screen was not tactile anymore.
Later, at home I had the same problem after a standby...
ansar.ath.gr said:
Hi,
I usually do not change S2U2 settings and never had problem. What specific settings did you apply ?
I did not test iGo yet but after today or next day finishing with the German rom i will.
Is your iGO working from Carte de stockage or Storage card ? Can you see with Total cmd if there is Storage card folder in your device ?
When you install iGO do not change manually the shortcut from the location the cab installed it.
If you want another shortcut make a copy with total cmd from the installed one to the desired location, do not move it.
Delays in GPS may result when covering or signal is not so good.
TomTom is verion 6 and i have maps, let's say Roma, in Carte de stockage\My Documents\Roma. It shouild be found automatically.
Waiting for more report, thanks for commenting and supporting.
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.20755 Build 20755.1.0.0 Mobile Vista 3.00 Premium
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a
Click to expand...
Click to collapse
Hi Ansar,
Thanks for replying
- I did not change any settings in S2U2. I just tested if I was able to enter settings as it crashed the last time I tried (with the bad installation). Now I have uninstalled S2U2 to see if I have more stability.
- Yes, Igo8 is working from my "Carte de Stockage" I hage an IGO8 folder on it + a 2577 folder with autorun.
- I did not move the IGO Shortcut. I use the original shortcut created after installation.
- I just saw an empty Tomtom folder in stockage\My Documents so I will put a map inside and see if it detects it.
At the moment, the real problem is te "updating" message after a crash because I am always scared when I see such a message. (see message posted just before). Any Idea ?
Best Regards,
Mystral
Mystral said:
Hi Ansar,
Thanks for replying
- I did not change any settings in S2U2. I just tested if I was able to enter settings as it crashed the last time I tried (with the bad installation). Now I have uninstalled S2U2 to see if I have more stability.
- Yes, Igo8 is working from my "Carte de Stockage" I hage an IGO8 folder on it + a 2577 folder with autorun.
- I did not move the IGO Shortcut. I use the original shortcut created after installation.
- I just saw an empty Tomtom folder in stockage\My Documents so I will put a map inside and see if it detects it.
At the moment, the real problem is te "updating" message after a crash because I am always scared when I see such a message. (see message posted just before). Any Idea ?
Best Regards,
Mystral
Click to expand...
Click to collapse
Hi,
Take care of your Carte de stockage, check if you left 2577 unchanged.
After autorun you should rename 2577 to say 2577_ in order not to be detected.
TomTom directory must have TTToday.dll, did you manually changed the SDConfig.txt in order to avoid TomTom installation ?
Is better to create the folder with the map name say Roma in Carte de stockage\My Documents\Roma
Thanks again for commenting and supporting.
Regards, ansar
_________________
HTC TyTN II owned, thnx to my friends
IPL CPLD-8
SPL 1.0.OliPof
CE image CE OS 5.2.20755 Build 20755.1.0.1 D3D M2D Mobile Vista 3.00 Premium
ansar.ath.gr said:
Hi,
Take care of your Carte de stockage, check if you left 2577 unchanged.
After autorun you should rename 2577 to say 2577_ in order not to be detected.
TomTom directory must have TTToday.dll, did you manually changed the SDConfig.txt in order to avoid TomTom installation ?
Is better to create the folder with the map name say Roma in Carte de stockage\My Documents\Roma
Thanks again for commenting and supporting.
Regards, ansar
_________________
HTC TyTN II owned, thnx to my friends
IPL CPLD-8
SPL 1.0.OliPof
CE image CE OS 5.2.20755 Build 20755.1.0.1 D3D M2D Mobile Vista 3.00 Premium
Click to expand...
Click to collapse
- Folder 2577 was unchanged.
I can rename it as you said but I need it when the application disappear in order to reinstall the software...
- I have a Tomtom folder in the device root with TTToday.dll inside.
- I have another empty Tomtom folder under "Device/My Documents"
- I did not change the SDconfig.txt
- If I create "Carte de Stockage/My Documents/" and put my Benelux Map inside, Tomtom does not detect it. Is says "no map found". I suppose that he looks to a folder in the device and not on my storage card...
Anyway, I will continue to use IGO8.
Is there a way to uninstall tomtom from this rom ?
Do you have an idea for my previous post ? (updating error message after a freeze)
Thanks
Mystral said:
- Folder 2577 was unchanged.
I can rename it as you said but I need it when the application disappear in order to reinstall the software...
- I have a Tomtom folder in the device root with TTToday.dll inside.
- I have another empty Tomtom folder under "Device/My Documents"
- I did not change the SDconfig.txt
- If I create "Carte de Stockage/My Documents/" and put my Benelux Map inside, Tomtom does not detect it. Is says "no map found". I suppose that he looks to a folder in the device and not on my storage card...
Anyway, I will continue to use IGO8.
Is there a way to uninstall tomtom from this rom ?
Do you have an idea for my previous post ? (updating error message after a freeze)
Thanks
Click to expand...
Click to collapse
Hi,
It looks like TomTom is well installed.
If you do not have Roma you can download it from a previous rom say Mobile Vista 2.00 .
Install Roma in Carte de stockage\My Documents\Roma. This is a must in order for TomTom to initialize, and then copy your own maps in Carte de stockage\My Documents.
An alternative is to install your maps but also need the software and licence to install them.
You can uninstall TomTom from Start\System\Remove programs (use the equivalent in French) and remove Ansar Navigator.
Updating error is probably due to unchanged 2577 folder.
Remove previous application, i.e. iGO, from Start\System\Remove programs.
Then Reinstall it with your Autorun or direct main.cab ( or any way) in 2577 but after installation rename 2577 to 2577_old.
By the way i installed iGo plus 2006 in the almost finished German rom and i do not have yet an issue.
I think you are close to recover everything and thanks and waiting for your valuable contribution.
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.20755 Build 20755.1.0.0 Mobile Vista 3.00 Premium
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a
Cool!
Thanks again for you information Ansar.
So finally, I prefered to remove TomTom and reinstall IGO8 as you said because I prefer this software.
I will use the device as much as I can in the following days to see if everything is Ok.
Of course, I will keep you informed.
Thanks!!!
Mystral said:
Cool!
Thanks again for you information Ansar.
So finally, I prefered to remove TomTom and reinstall IGO8 as you said because I prefer this software.
I will use the device as much as I can in the following days to see if everything is Ok.
Of course, I will keep you informed.
Thanks!!!
Click to expand...
Click to collapse
Hi,
Thanks for commenting and supporting.
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.20755 Build 20755.1.0.0 Mobile Vista 3.00 Premium
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a
Hi again Ansar,
So here is my latest feedback.
After some days using the rom, I faced the same 2 issues.
- iGO8 Shortcut is suddently missing everywhere but ok if I lauch it from /program files.
- When I soft reset the device, it trys to update it with SD /MMC Card but fails. (and the 2577 folder is renamed to 2577_old)
So I came to that conclusion :
- Maybe my iGO8 version is not stable on WM6.1. (but this version was stable on the original mio rom and this is not an old iGO version).
=> If you agree, I can provide you my iGo8 version so you can test it and see if you experience the same problem. I have already uploaded it to rapidshare.com and I can send you the link by private message.
- I never removed the "VistaLibFRE19212MVP1_00" folder and SDconfig.txt from my Storage Card after installation. Do you think this is related to the "updating" message after soft reset ?
Anyway, those problems are not bloking me too much as I have a workaround.
I enjoy your rom even with those little issues.
Thanks for giving a second life to my Mio A701
Hi,
I have a problem with Google Maps when I choose French language : "Fermeture soudaine de l'application Maps (du processus com.google.android.apps.maps). Merci de reessayer"
"Close Maps Application (process com.google.android.apps.maps). Please retry"
It works fine in English.
Not only with Google Maps. I have a lot of issues when I choose French language.
This implementation is based on GPS Library in HTC-HD2 Android Libraries. (Thanks to dan1j3l.)
You can find my modified source code and AGPS development info in the second post.
New Features:
Show the number of satellites before getting a location fix.
Show or hide the GPS symbol in the status bar instantly when you start or stop a GPS app.
Support the leap seconds. (Thanks to arne182.)
Modify the Accuracy (i.e. Error in meter) to be more reasonable.
Add AGPS interface. (Won't see "no AGPS interface in agps_data_conn_open" in logcat now.)
Add the missing functions to receive the NTP, XTRA, and SUPL settings from gps.conf.
Add AGPS implementation including injecting AGPS data (xtra.bin) and NTP time into the gpsOne engine.
Hide Fix/Sats info and make the GPS symbol in the status bar flashing when you go to basement or tunnel.
Show DOP/HDOP/VDOP values in GPS Status.
Show Altitude above Geoid (i.e. mean sea level) and Geoid height. (You will see both of them in GPS Status. The value within parentheses is Geoid height.)
Show correct SNR (Signal to noise ratio) value.
Activate the AGPS data injection. (You can get a cold lock very quickly due to the working AGPS.) (Thanks to qwerty_7564.)
Click to expand...
Click to collapse
Known issues:
Accuracy value is for reference only.
Position Accuracy (meter) = HDOP (unitless) * Measurement Precision (meter). (Please confirm whether this formula is correct.)
We only get the correct HDOP value, and we assume the value of Measurement Precision, and then do a post calculation to get Accuracy. So don't trust it completely.
Some ROMs are not compatible with NMEA version of libgps.so.
Those ROMs don't set the correct permission to /dev/smd27, so libgps.so cannot read NMEA sentences from it.
The solution is to flash GPS_NMEA_permission_update.zip for correcting the permission after booting.
Some ROMs suffer from the "GPS off-and-on" bug.
Those ROMs can shutdown the gpsOne engine properly when turning off GPS setting using gps_cleanup(), but they cannot restart the gpsOne engine again because gps_init() is never called when turning GPS setting on after turning it off.
It's a Gingerbread bug which is fixed by applying this commit from the source code.
If you cannot modify the source code, the workaround is to set/add GPS1_CLEANUP_ENABLED=0 into gps.conf to avoid doing full cleanup.
Click to expand...
Click to collapse
Downloads:
Mod edit: Links removed
Installation for CWM:
Place your downloaded file (GPS_Libraries_v1.x_for_HD2_Gingerbread_update.zip) in the SD card.
Enter CWM (ClockworkMod) Recovery
MAGLDR 1.13: Hold "Power" button during boot to enter MAGLDR, and then select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD) to enter CMW.
cLK 1.4.0.1: Hold "Home" button during boot to enter CMW.
Choose install zip from sdcard and locate your downloaded file to finish the installation.
All done.
Click to expand...
Click to collapse
You can install GPS Status & Toolbox or GPS TEST to test the new libs.
How to inject the AGPS data (xtra.bin):
It will be done in the following situations. (Data connection, WiFi or 3G, is a must in all of them.)
When you turn off GPS in setting and turn it on again.
When you keep GPS on and reboot. (also inject NTP time)
When you keep GPS on and run Leo AGPS Injector. (also inject NTP time)
When you keep GPS on and run GPS Status. (or any similar apps to download AGPS)
AGPS will be downloaded when you start GPS Status if AGPS is older than X days or Y hours where X and Y are read from the settings.
Or you can download it manually from Tools.
When you keep GPS on and replace with the modified gps.conf to set AGPS auto-download intervals when using GPS libs v1.8 or above.
AGPS auto-download intervals are disabled in default if you don't modify gps.conf.
Click to expand...
Click to collapse
How to verify if AGPS works or not:
When AGPS works, you will be able to get a full lock (e.g. 7/7, 8/8, or 9/9) in cold start less than 20 seconds if you're outdoor in a sunny day.
(Full locks mean fix and satellites equals to each other.)
If AGPS not works, you may see 5/7, 6/7, 5/8 (fix is less than satellites) right after you get a lock.
Click to expand...
Click to collapse
How /system/etc/gps.conf works?
There're three stock gps.conf in AOSP repository for different regions.
1. gps.conf_AS_SUPL (Asia)
2. gps.conf_EU_SUPL (Europe)
3. gps.conf_US_SUPL (North-America)
# Explanations are added. Don't copy them below to your gps.conf.
NTP_SERVER=north-america.pool.ntp.org (Used for NTP time injection)
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin (Used for AGPS data xtra.bin injection. Randomly choose from one of these three servers and download xtra.bin from it.)
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST=supl.google.com (Be read but never be used)
SUPL_PORT=7276 (Be read but never be used)
Click to expand...
Click to collapse
SUPL_HOST and SUPL_PORT are not used in current GPS libs implementation, so you can delete them.
Supported extra settings for /system/etc/gps.conf when using v2.0 or above. (Only valid for HD2)
Beginning with character # means this line is a comment, so you can remove it.
You don't need to add any of them if you don't know what they are.
Code:
###########################################
# Enable/disable automatic (periodic) #
# download requests of gpsOneXTRA #
# assistance data to client #
# Range: 0 to 1 #
# Default: 0 (Disabled) #
###########################################
[COLOR="Red"]GPS1_XTRA_AUTO_DOWNLOAD_ENABLED=0[/COLOR]
###########################################
# Time (in hours) between automatic #
# download requests of gpsOneXTRA #
# assistance data to client #
# Range: 1 to 168 (168 = hr in a week) #
# Default: 24 hr #
###########################################
[COLOR="red"]GPS1_XTRA_DOWNLOAD_INTERVAL=24[/COLOR]
###########################################
# Enable/disable to shutdown the gpsOne #
# engine properly on GPS off #
# Range: 0 to 1 #
# Default: 1 (Enabled) #
###########################################
[COLOR="red"]GPS1_CLEANUP_ENABLED=1[/COLOR]
###########################################
# Time (in seconds) between invoking #
# pdsm_get_position() #
# Range: 2 to 120 #
# Default: 2 seconds #
###########################################
[COLOR="red"]GPS1_SESSION_TIMEOUT=2[/COLOR]
Click to expand...
Click to collapse
AGPS works in v1.7. The following workaround is for v1.6 and below versions only.
Instructions for the AGPS data Injection.
There're at least three methods (I recommend free apps here.) to be able to inject AGPS data.
GScript method.
Script Manager method.
LeoAGpsSwitcher_0.1.apk method.
GScript method is the base, so I describe it as follows.
Please download libgps_Switcher_v1.6.zip, decompress it to your SD card, and follow the steps below if you want AGPS support.
You need to repeat steps 4 and 5 every time when you need AGPS.
Put the following files in the SD card.
/sdcard/ClockworkMod/GPS_Libraries_v1.6_for_HD2_Gingerbread_update.zip (Remember to download it.)
/sdcard/ClockworkMod/libgps_with_AGPS_update.zip (Remember to download it.)
/sdcard/GScript/1_install_Magic_AGPS.sh
/sdcard/GScript/2_install_libgps_v1.6.sh
Install GScript or GScript Lite.
Add 1_install_Magic_AGPS.sh and 2_install_libgps_v1.6.sh to GScript.
Run 1_install_Magic_AGPS.sh, and the phone will hot reboot itself.
After reboot, make sure you have network connection, and wait at lease 1 min to let Android download and inject AGPS data.
Run 2_install_libgps_v1.6.sh, and the phone will hot reboot itself.
After reboot, you can enjoy the quicker GPS cold lock.
Click to expand...
Click to collapse
Changelog:
Version 2.1 NMEA|RPC - (Aug. 26)
Both: Remove or reduce some debugging info output to logcat. (Cleanup and optimization stage.)
Both: Output NMEA or RPC version and parsed settings of gps.conf to logcat.
Version 2.0 NMEA|RPC - (Aug. 6)
Both: Add GPS1_SESSION_TIMEOUT in gps.conf to set time between invoking pdsm_get_position(). (Default is 2 seconds. Range is 2~120 seconds.)
RPC: Hide Fix/Sats info and make the GPS symbol in the status bar flashing when you go to basement or tunnel. (NMEA already has this feature. This is for RPC version.)
Version 1.9 NMEA|RPC - (Jul. 29)
Both: Include v1.7's latest gps.htcleo.so, gps.leo.so, and gps.bravo.so again.
Both: Add a new thread for getting GPS location locks: (Credits to qwerty_7564)
gps_get_position() is called in its own thread using callbacks to request the next position.
remove unnecessary sleep and the can_send flag in pdsm_get_position().
Both: Remove unnecessary mallocs since there is a performance cost for use. (Credits to qwerty_7564)
Both: Shutdown the gpsOne engine properly on GPS off. (i.e. turning off GPS from settings) (Credits to qwerty_7564)
Both: Support loading the GPS1_CLEANUP_ENABLED flag from gps.conf. (Set it to 0 if you use a ROM that has "GPS off-and-on bug".)
Both: Parse gps.conf and invoke pdsm_xtra_set_auto_download_params() only once until reboot.
Both: Support the customized fix update frequency, which is set by a GPS tracking app, via gps_get_position(int timeout).
NMEA: Add a timer thread for supporting the customized fix update frequency which is set by a GPS tracking app.
(As a result, we won't see the fast-forwarding effect in time field in GPS Status, and the random hot reboot issue in NMEA version may be fixed too.)
Version 1.8 NMEA|RPC - (Jul. 19)
Both: Support automatic (periodic) download requests of gpsOneXTRA assistance data to client. (Default is disabled.) (Credits to qwerty_7564.)
Both: Support enabling xtra.bin download requests and setting download interval from gps.conf.
Both: Include v1.6's old gps.htcleo.so, gps.leo.so, and gps.bravo.so. (It seems that v1.7's new gps.xxx.so causes the battery drain in some ROMs, but not all ROMs.)
NMEA: Disable $GPGSV report to make NMEA version more stable. (It seems that random hot reboot issue is reduced.)
RPC: Support the negative altitude. (Credits to arne182.)
RPC: Fix the incorrect HDOP value.
Version 1.7 NMEA|RPC - (Jul. 10)
Both: Activate the AGPS data injection. (You can get a cold lock very quickly due to the working AGPS.) (Thanks to qwerty_7564.)
Both: Include updated gps.htcleo.so, gps.leo.so, and gps.bravo.so. (Fix suspension issues.) (Thanks to rmcc.)
RPC: Disable NMEA sentences output and enable RPC Callback function output.
Version 1.6 - (Jul. 05)
Set Measurement Precision to 10.0 meters.
Version 1.5 - (Jun. 26)
Support daylight saving time (DST).
Version 1.4 - (Jun. 24)
A whole new version using NMEA sentences.
Hide Fix/Sats info when you go to basement or tunnel.
Show DOP/HDOP/VDOP values in GPS Status.
Show Altitude above Geoid (i.e. mean sea level) and Geoid height. (You will see both of them in GPS Status. The value within parentheses is Geoid height.)
Show correct SNR (Signal to noise ratio) value.
Disable AGPS Ephemeris data (xtra.bin) injection.
Assume Measurement Precision to 5.0 meters.
Include updated gps.htcleo.so, gps.leo.so, and gps.bravo.so. (Only one file will be used by your ROM. I suggest to delete the other two files in this zip file, and then flash it.)
Version 1.3 - (Jun. 15)
Fix the reboot issue. (In v1.2, reboot your phone when the GPS setting is off, you will enter the boot loop.)
Inject the correct time to the gpsOne engine.
Comment out some debugging data.
Version 1.2 - (Jun. 12)
Support injecting AGPS Ephemeris data (xtra.bin) into the gpsOne engine by implementing pdsm_xtra_set_data().
Support injecting time into the gpsOne engine by implementing pdsm_xtra_inject_time_info().
Assume Measurement Precision to 2.5 meters.
Version 1.1 - (Jun. 02)
Assume Measurement Precision to 2.0 meters.
Version 1.0 - (May 28)
Show the number of satellites before getting a location fix.
Show or hide the GPS icon in the status bar instantly when you start or stop a GPS app.
Support the leap seconds. (Thanks to arne182 for figuring it out.)
Modify the Accuracy to be more reasonable. (Assume Measurement Precision to 10 meters)
Add AGPS interface. (Won't see "no AGPS interface in agps_data_conn_open" in logcat now.)
Add the missing functions to receive the NTP, XTRA, and SUPL settings from gps.conf.
Click to expand...
Click to collapse
Credits: the XDAndroid Project, dan1j3l, rmcc, tytung, arne182, clyder, ozkaya, qwerty_7564, and everyone who participated in the related discussion or helped test the libs.
AGPS Development is finished.
My modified source code of libgps.so has been uploaded to Github. https://github.com/tytung/android_hardware_leo_libgps
Notice:
The source code is released under the GNU General Public License version 3 (GPLv3).
So you must release your modified source code if you would like to release a modified libgps.so.
Development info:
Extracted files from WinMo related to GPS.
AMSS PDAPI functions for injecting xtra data and time: 80-VE814-1_D_gpsOneXTRA_Assistance_API_and_Client.pdf (I found it from Google)
pdsm_xtra_set_data(...) on page 24.
pdsm_xtra_inject_time_info(...) on page 17.
AMSS PDAPI for other pdsm_* functions: 80_V1960_2_M_gpsOne_ISOD.pdf (I found it from Google)
E.g., pdsm_client_init(...) on page 26.
E.g., pdsm_client_pd_reg(...) on page 29.
RPC calls for Leo
RPC calls examples of remote_apis_clnt.dll
Leo RPC list
MSM RPC list
Working AGPS data injection
Click to expand...
Click to collapse
Credits: tytung, clyder, ozkaya, qwerty_7564, and everyone who participated in the related discussion or helped test the libs.
wow, trying for sure
Edit: Deleted by myself...
Anyway thx for the answer
Nice work~testing
After I mod the gps.conf, the google map works well
but the GPS Test Plus can't find any satellites
Wow! Awesome to have developers like you ! Keep up the good work
Sent from my HTC HD2 using XDA Premium App
Thanks a lot tytung, just what i was waiting for. Thanks a lot for everything you have done for hd2. I will try and report soon.
What about standby settings? Can i set my gps to work while phone is in standby? (e.g. log my track when jogging)
With Run.GPS it doesn´t work.
Sorry, why this app need?
xaoc747 said:
Sorry, why this app need?
Click to expand...
Click to collapse
i've just tried with typhoon 3.3.3 and before flash the new library more than 3 minutes and i'ven't got fix, after flash the new library istant fix.
Great job Tytung
deleted...
Bib_x said:
What about standby settings? Can i set my gps to work while phone is in standby? (e.g. log my track when jogging)
With Run.GPS it doesn´t work.
Click to expand...
Click to collapse
Change your app.
I think it's the app issue.
The app you used doesn't process the WakeLock properly.
Thanks.
Thank you tytung for all your hard work.
It can make the gps work better ,the old one can't work with gps.conf,the lastest one improve this
can't work with GPS Test Plus , sorry
pecora said:
i've just tried with typhoon 3.3.3 and before flash the new library more than 3 minutes and i'ven't got fix, after flash the new library istant fix.
Great job Tytung
Click to expand...
Click to collapse
I reduce fix_frequency and timeout value of gps_get_position(), so it may improve the time you get a location fix.
However, there're too many environmental factors to affect getting the location fix time.
So it still needs more people to test and confirm it.
shendan said:
can't work with GPS Test Plus , sorry
Click to expand...
Click to collapse
Interesting.
It works with GPS Test.
I don't have a Plus version.
Thank you tytung!
Can we use it in Sense Gingerbread ROMS? Or only in AOSP ones?
Hi and thanks a lot for taking care of this for us, who are too dummy to make any coding
I want to publish some additional info I have found.
I was playing with libs from MIUI as there gps works better.
The point I want to pick up is this: there is line in build.prop
"ro.ril.def.agps.mode=2"
When I switched the HW lib and added this line to build prop, the cold start shortened from 3-5 min into 30-50 sec.
Maybe it's not anything to help you, as you can go other way. But ... for any case I wanted to share
edit: PS. I'm with customized GBX12
WOW!
Wow Tytung!! I got gps signal in 2 seconds!!
the only negative thing I can say is that the gps signal was low. Used gps test plus, and the gps signal was at 30, usally it's 50- 70.