Develop Bugs

MS Voice command any1 got it 2 work??

Have had MS VCommand running perfect in the past on my mini S & then Exec ,
Have now just changed to XDA orbit & my fav program will not run,
any 1 have a solution yet??
Ian

about to try.....

seems fine, not keen on it myself but hey, seems memory hungry too
plus its a yank

I mean this 1 http://www.microsoft.com/windowsmobile/voicecommand/default.mspx
The 1.6v is US only any 1 tried it yet?
NOT the crummy speech voice dial (comes on orbit) that repeats what u say,

I'm using v1.6 of MS Voice Command, German version. I think only v1.6 runs on the Orbit (WM5), I've read in another forum that v1.5 won't run or only with some registry hacks.
Version 1.6 runs fine on my device, no problems at all.

Tried MS Voice Command 1.6 US on the Orbit, runs perfectly.

Hey .. its seems no problem for my MDAC III with VC 1.6 too ... Try that one ... its shoud be fine

Hi all,
thanks 4 replys, got the 1.6 US version, & it works OK
Strange no UK version but how differant could it be??
Ian

ian57 said:
I mean this 1 http://www.microsoft.com/windowsmobile/voicecommand/default.mspx
The 1.6v is US only any 1 tried it yet?
NOT the crummy speech voice dial (comes on orbit) that repeats what u say,
Click to expand...
Click to collapse
and? I have installed MS VC v1.6 US and its fine, what problems you having?
Jez

Voice command activation
Hi,
Has anyone using Voice Command got it to activate using the button on the headset. If so, how is the button setup mapped?
Wilf

wilf said:
Hi,
Has anyone using Voice Command got it to activate using the button on the headset. If so, how is the button setup mapped?
Wilf
Click to expand...
Click to collapse
Did you ever get it to work? I couldn't get mine to work either!

Someone got VOIP working on his Artemis?

I flashed my phone with the WM6 PDAMobiz rom.
I installed the apps I need, and right now I'm pretty satisfy with this rom and my Orbit.
But one of the main reasons why I flash the phone to WM6, was cause on WM6 it should be able to get VOIP working on the phone.
I tried several things, but I just can't get VOIP working on the Orbit.
Whatever I do or try it always says "VoipBuster" searching
Any ideas?
Thanks

What data plan do you have on your account?

Gajet said:
What data plan do you have on your account?
Click to expand...
Click to collapse
Ok, I finally manage to get this working ;-)
Now my Orbit looks more and more the perfect device to me.
My next thing on the whishlist for the Orbit is SDHC support, so I can put a 4 gig card in my Orbit
@Gajet, euh what dataplan? I'm using VoipBusterPro for a several months now, in the beginning I was using it with my Nokia N80 and now finally with my Orbit.
The countries I need to call to is free (not really free, cause they charge you a connection fee of 3.9 eurocents for every call you make!)

Skype works just fine!
CoolGadget said:
Ok, I finally manage to get this working ;-)
Now my Orbit looks more and more the perfect device to me.
My next thing on the whishlist for the Orbit is SDHC support, so I can put a 4 gig card in my Orbit
@Gajet, euh what dataplan? I'm using VoipBusterPro for a several months now, in the beginning I was using it with my Nokia N80 and now finally with my Orbit.
The countries I need to call to is free (not really free, cause they charge you a connection fee of 3.9 eurocents for every call you make!)
Click to expand...
Click to collapse
Hey guys!
Skype works just fine on my newly upgraded HTC P3300 but I must say that "Battery Status" (overclocked at 247 Mhz) does the trick!
While talking with Skype my battery reaches up to 42 Celsius... Hope I will not FRY my device... A couple of minutes after then talk it drops down to the average 34 Celsius.
On an other account I must say that on the WM6 rom I just flashed, WMP does not play MP4 (very strange!) and in the Start/Settings I am missing some items (Voice Commands for example!)... Any idea how to fix that?
Thanx,
SiperX

SiperX said:
Hey guys!
Skype works just fine on my newly upgraded HTC P3300 but I must say that "Battery Status" (overclocked at 247 Mhz) does the trick!
While talking with Skype my battery reaches up to 42 Celsius... Hope I will not FRY my device... A couple of minutes after then talk it drops down to the average 34 Celsius.
On an other account I must say that on the WM6 rom I just flashed, WMP does not play MP4 (very strange!) and in the Start/Settings I am missing some items (Voice Commands for example!)... Any idea how to fix that?
Thanx,
SiperX
Click to expand...
Click to collapse
SiperX
I have Voice Speed Dial under programs. Is that what you looking for?
What else are you missing?
cheers
CoolGadget

Missing in Settings
CoolGadget said:
SiperX
I have Voice Speed Dial under programs. Is that what you looking for?
What else are you missing?
cheers
CoolGadget
Click to expand...
Click to collapse
Hi CG,
Normally Voice Speed Dial should be in Settings and not in Programs.
I have used Voice Speed Dial quite a lot in WM5 as I controlled almost totally by voice commands (calls to contacts, applications/utilities) my device.
With this rom (not having it in Settings) you open it in Programs (so you can access its function but not the configuration/options), you save some voice tags and once you have closed it you cannot open it any more to add/remove/edit voce tags....
I hope I made myself understood... Try it on your device and you will see what I mean...
Any suggestion is welcome.
Thanks in advance,
SiperX

SiperX said:
Hi CG,
Normally Voice Speed Dial should be in Settings and not in Programs.
I have used Voice Speed Dial quite a lot in WM5 as I controlled almost totally by voice commands (calls to contacts, applications/utilities) my device.
With this rom (not having it in Settings) you open it in Programs (so you can access its function but not the configuration/options), you save some voice tags and once you have closed it you cannot open it any more to add/remove/edit voce tags....
I hope I made myself understood... Try it on your device and you will see what I mean...
Any suggestion is welcome.
Thanks in advance,
SiperX
Click to expand...
Click to collapse
Totally clear mate ;-)
Never realisez this "bug" till you mentioned it...
I'm wondering if they can solve this... :s

WM 6.1 and MS Voice Command 1.6

Anybody get this working? If so, what hacks did you have to use? Would be really interested to know this. Thanks.
Jim

I am running RanDomIze WM6.1 and it works fine, even with Bluetooth headset. No hacks needed

f you need to hack, as Pays 6.1 I needed them and Schaps 6.1 I didn't, Here is one of them, the other is too big to upload but here is the name..MSVC_1.60_WM6_8525

I'm using Schaps and I think I need to try the hack. I'm getting the notifications and rings through the handset not my BT. I'm using a Plantronics Voyager. Will try the hack. Oh, and I am using the new VC that was published in October.
Thanks,
Jim

OK I got it working...sort of.
Using the MSVC_1.60_WM6_8525 file, I got notifications through BT. BUT it only gives me one notification then it stops. But the caller still hears ringing. Not sure if this is a nuance or an issue with my BT.
Thanks,
Jim

Newb-Tech-Realtor said:
OK I got it working...sort of.
Using the MSVC_1.60_WM6_8525 file, I got notifications through BT. BUT it only gives me one notification then it stops. But the caller still hears ringing. Not sure if this is a nuance or an issue with my BT.
Thanks,
Jim
Click to expand...
Click to collapse
I use one titled msvc 1.60 all working, or something real close to that.

I am using both and mine works fine

Callers can't hear me

So recently I've been having this weird issue where callers call and I'll answer but they can't hear me. It happens when I call out too. I'm not using any headsets or anything, but it seemed like it started happening when I started turning on bluetooth and leaving it on. But if I have my headset on, that part works fine, they can hear me. I had a custom rom that I cooked myself that seemed to work fine until then.
So I figure I'd ditch my own rom thinking maybe I screwed something up while cooking it, so now I'm using PDAVIET DV's most recent rom. I tested it all yesterday and it seemed fine, but then that night I got a few calls that couldn't hear me again.
This morning things were fine again, after I shut it off then back on. I made a lot of calls out and in from another cell phone, and it worked fine. Then while I was waiting for a phone interview, it didn't work again. Is anyone else having this issue? Or does anyone know why it's happening?
I'm starting to think may it's a sleep issue, because the only thing my phone did in the time between my this morning's testing and the phone interview, was it sat idle in standby mode.
Any Ideas?

Which radio are you using and who is your carrier?

What OS are you using? Does a soft reset fix it?

Zzan said:
Which radio are you using and who is your carrier?
Click to expand...
Click to collapse
1.54.30.10 AT&T
ai6908 said:
What OS are you using? Does a soft reset fix it?
Click to expand...
Click to collapse
My own custom WM6.1 19209 rom, but also happens on DVH 19701 also. Soft reset doesnt seem to help, but power off, and back on does help until phone goes back to standby.

bjevers said:
I just realized I have a sound issue also. I almost always use my bluetooth headset, but yesterday I tried just talking on the phone and the other person could not hear me. I reset the phone and it worked again, but only for a while. I noticed though that when it stops sending my voice to the other person, I can still hear myself in my earpiece. I even loaded Voice Recorder after it quit sending my voice over the phone and it recorded my voice just fine, so I know this is not a hardware issue. Has anyone else experienced this?
EDIT - I did a soft reset, and it didn't fix the problem. I disabled 3G, soft reset, and it worked again for now. Could this be radio related?
EDIT 2 - Disabling 3G wasn't the answer. I did that again and it didn't work this time. Might try a different ROM and see if the issue persists.
Click to expand...
Click to collapse
sniveri said:
This sound issue appeared to me after I installed google maps or new dialpad. I can call to people but after I while talking sound is fading and in the end others can not hear me but I can hear them. Soft reset helps for a while but this issue appears again in next call after few minutes.
Click to expand...
Click to collapse
bjevers said:
Here's what I have installed:
Arcsoft MMS 5.0.31.11
Total Commander
Hexic
Touchpal
Coreplayer
Memmaid
Garmin Mobile XT
SiriusWM5
moBlue
HTC Album
HTC ConnectionSetup
HTC Voice Recorder (installed to test that mic was still working)
Listpro
Kyphur Comm Button Toggle Fix
Live Search
Mortscript
Newsgator Go
Resco Radio
Schaps Advanced Config
SKTools
SPB Suite (Diary, Mobile Shell, Phone Suite, Wallet, Weather) All newest versions
Sprite Backup
Vito FunContact
Windows Live 10.6.0034.0800
I removed Google Maps and SRS WOW after reading others posting in the thread that caused them problems. I have not been able to test if it is fixed yet.
Click to expand...
Click to collapse
Ok just consolidating our issue into my original thread from last week.
I've resorted to not installing all my usual software, and only have this installed so far:
Schap's 2G Dialer
Schap's Advanced Configuration Tool
6 Button Comm Manager
HTC Home Plugin
ELF Calculator skin
Arcsoft MMS 5.0.31.11
HTC Connection Setup
no2chem nueLED
And so far (for two days) I haven't had any issues... here's the software I have yet to install that I usually install:
ATIFix
Cyberon VoiceCommander or MS Voice Command (thought it was one of these but it turned out not)
GoogleMaps
MS Office 2007
WindowsLive10.6.0034.0800
SRS_WOWHD_bt_fixed
TCMPv0.81
FlashVideoBundle
I was thinking maybe it was because of bluetooth being on or something too.

SRS WowHD do that issue. Download another version of that program and phone will be all right.

Mine has gone all day and it seems to be working. I think it's the SRS_WOWHD_bt_fixed cab like wikiri mentioned.

I have flashed official AT&T-ROM, then hardSPLv7, then PDAViet 19900-rom and after that radio rom 1.47.30.10. Mic works sometimes but most of the time it does not. I do not have any issues with roms no hard-reset or anything else wierd but this mic thing.
My PDA is just repaired and switchboard has been replaced and some other components. They said everything should be working and it is tested.
I have installed only ConnectionSettings.cab and latest live-messenger. Mic does not work on phone calls or when recording something.
So could this still be hardware issue?

bjevers said:
Mine has gone all day and it seems to be working. I think it's the SRS_WOWHD_bt_fixed cab like wikiri mentioned.
Click to expand...
Click to collapse
My phone is doing the same thing.
How do you fix the SRS_WOWHD_bt_fixed cab?
Is it a patch or a setting you can manually change in the Phone.

Cooked Rom with GM/Chevy OEM Bluetooth

Hi guys.
Have kind of an odd one. I am trying to get my Tilt2 to work with Silverado OEM Bluetooth. Really strange in that with a cooked ROM loaded (tried probably 5-6 now) it will not work properly. It will connect/pair alright. I can make and receive calls with CallerID working fine but when I actually connect, no sound goes through on either end.
But if I flash the official At&t ROM, it works fine. For giggles, I tried paring with my old Tilt1 which has a cooked rom running WM6.5 and it works fine.
I know it is kind of a long shot but I figured I would ask if anyone had any ideas.
Thanks
Ernie

Search the Rhodium forums for bluetooth + car, there are some solutions which involve registry tweaking that should work.

muzgus said:
Search the Rhodium forums for bluetooth + car, there are some solutions which involve registry tweaking that should work.
Click to expand...
Click to collapse
Thanks muzgus! That was the combo search I needed. You da man.
For any one else that comes across this post, you are looking for this:
forum.xda-developers.com/showpost.php?p=5111308&postcount=667
Ernie