Hey guys,
I read here that iGo can't be put on DIAMOND because it doesn't have a slot card, but then I saw this site (it's Italian, so I don't understand it, but the video is pretty obvious) http://www.hdblog.it/mobile/?p=88
So is it really possible? If so, then how do I do it?
another nebiew question.. it said that the developers can certify the ROMs, but they don't have the actual HTC diamond.. How can I be sure it won't brick it?
And one last question Where can I find the latest ME ROM?
Thanks!
Installation from Internal Storage (HTC Diamond users):
1. Unrar the content of the archive into your Internal Storage
2. Rename application.dat to iGO8.exe
3. Open SYS.TXT file located in your IGO8 directory and add the following section to it:
[folders]
app="Internal Storage/iGO8"
PS: Be sure that you have the latest version IGO8: v8.0.0.41506 (June 3 release)
I tested it on my Diamond and works flawlessly
tomchook said:
Where can I find the latest ME ROM?
Thanks!
Click to expand...
Click to collapse
Latest ME rom is 1.37.456.2 and can be find here in rom development, use search this forum function
Related
Hello,
Is it possible backup the rom before apply the rom with touchflo:
http://forum.xda-developers.com/showthread.php?t=388523
I've jasjam/tytn model.
Thanks,
Rom
Hi,
look here.
wfg
starbase64
starbase64 said:
Hi,
look here.
wfg
starbase64
Click to expand...
Click to collapse
tried download. its only 5KB and it says "invalide win32 applications"
rommark said:
tried download. its only 5KB and it says "invalide win32 applications"
Click to expand...
Click to collapse
Open your eyes!!!
You have to read everything, not only the title.
Setup
- rename 'grab_it_xx.exe' to 'autorun.exe'
- create folder '2577' on your (empty) SD/MMC/Mini-SD card
- copy 'autorun.exe' to this folder
grab_it_xx.exe / autorun.exe is for windows mobile!!!!
wfg
starbase64
ok I've backedup. and it created the file on my SD card.
now after i installed the new ROM for hermes with the touchflo and wm6...
once i want my rom back. how i restore it?
2) http://forum.xda-developers.com/showthread.php?t=388523 asking for SPL 1.11 installed. how i know if i have it installed?
the built in check tool in this firmware installation cannot recognize the model...
3) how i check if i've also the HARD SPL 1.11?
thanks!
ok, i've installed this new Rom
few more questions:
1) i've made backup of my original one with lang license.. it created dump.bin if i will would like to restore it..how i do it?
2) I've installed this rom. but i cant see too much animiations like cube,slides... as you can see on youtube touchflo's and on diamond/touch series. how i can enable those effects?
3) which is best touchflo rom for JASJAM so far which i must try as new jasjam user who looking for excitements hehe
Thanks a lot!!!
First of all I'm sorry for my english, hope you can understand me...
I'm going to cook my first ROM...
The idea is to make 2 versions (with/without manila) of a clean "uc capable" rom; what I want to do is take a 1.93 official base and update some oem app and sys (i.e. htc camera and netcf) and remove some others to replace theese with 3t part usefully app (i.e. putting in wktask manager instead htc task).
Now my doubts:
(I've readed a lot of wikies and thread but didn't find a CLEAR answer to all my questions)
1- If I use an official .exe rom as base I obiouvsly find inside it the radio part...have to remove this befor but in base folder due i don't need it for my work? How?
2- I'm able to remove oem pack from my rom base and I'm also able to repack new ones starting from a cab file...but I don't know if it's possible to take (exactly as they are) some oem pack from a stock/custom(when not protected) rom to use in mine...I saw that a lot of cookers use oem pack taken from raphael official roms to update thair roms and I would know if the process to do this is just open the rom, copy the oem and past it in mine... In this case...where can I find a good very update raphael rom?!
3- Opposite than this, for manila I would use the "animated switches" version. I want to downgrade it to the version with theese animations but I don't know if there's a particular process to replace this oem...can you tell me? PS: what is the exact manila version I need to do it?
4- TO UPDATE NETCF TO THE 3.5 VERSION WHAT HAVE I EXACTLY DO? And is the Alexandre's oem pack good for my pourpose?
Thank you a lot and sorry if (maybe) some questions were answered in other threads...I searched and readed a lot but there are too many informations in this forum for a noob/bad english speaker/... like me so I decided to ask!
GriFolle said:
First of all I'm sorry for my english, hope you can understand me...
I'm going to cook my first ROM...
The idea is to make 2 versions (with/without manila) of a clean "uc capable" rom; what I want to do is take a 1.93 official base and update some oem app and sys (i.e. htc camera and netcf) and remove some others to replace theese with 3t part usefully app (i.e. putting in wktask manager instead htc task).
Now my doubts:
(I've readed a lot of wikies and thread but didn't find a CLEAR answer to all my questions)
1- If I use an official .exe rom as base I obiouvsly find inside it the radio part...have to remove this befor but in base folder due i don't need it for my work? How?
2- I'm able to remove oem pack from my rom base and I'm also able to repack new ones starting from a cab file...but I don't know if it's possible to take (exactly as they are) some oem pack from a stock/custom(when not protected) rom to use in mine...I saw that a lot of cookers use oem pack taken from raphael official roms to update thair roms and I would know if the process to do this is just open the rom, copy the oem and past it in mine... In this case...where can I find a good very update raphael rom?!
3- Opposite than this, for manila I would use the "animated switches" version. I want to downgrade it to the version with theese animations but I don't know if there's a particular process to replace this oem...can you tell me? PS: what is the exact manila version I need to do it?
4- TO UPDATE NETCF TO THE 3.5 VERSION WHAT HAVE I EXACTLY DO? And is the Alexandre's oem pack good for my pourpose?
Thank you a lot and sorry if (maybe) some questions were answered in other threads...I searched and readed a lot but there are too many informations in this forum for a noob/bad english speaker/... like me so I decided to ask!
Click to expand...
Click to collapse
1. When dumping a ROM, it will dump separately the splashes, radio, os and extrom (if any.) Extract the exe with WinRAR and dump the nbh.
2. When dumping a ROM, it will create packages if ROM is unprotected. A good place of finding a Raph ROM would be the Raphael forums.
3. Delete the old package from kitchen and replace with new one (in your case, the old one, animated).
4. You can find ready made NetCF 3.5 packages. You should delete the old NetCF 2 from SYS folder and replace it with the 3.5
tnyynt said:
1. When dumping a ROM, it will dump separately the splashes, radio, os and extrom (if any.) Extract the exe with WinRAR and dump the nbh.
2. When dumping a ROM, it will create packages if ROM is unprotected. A good place of finding a Raph ROM would be the Raphael forums.
3. Delete the old package from kitchen and replace with new one (in your case, the old one, animated).
4. You can find ready made NetCF 3.5 packages. You should delete the old NetCF 2 from SYS folder and replace it with the 3.5
Click to expand...
Click to collapse
Thanks a lot!
So, to replace OEM, just put out (from a rom) and put in (in mine)...so simple?!
Ahahah...
Please, excuse me for my stupidity...BUT I REALLY NEED AN HELP!!!
(I'm following this guide: http://forum.xda-developers.com/showthread.php?t=413782&highlight=kitchen)
Here's what I do:
1) I've downloaded from htc site the last official stock rom (localized for my country) \HTC Touch Diamond\QMR\RUU_Diamond_HTC_ITA_1.93.408.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
2) I've extracted all files and putted them into Base ROM folder of surface kitchen.
3) clicked on begin and obtained some folders in the kitchwen one
Now if I go into one package folders in OEM (htc gesture in example) i can't see dsm or rgu files, but just dll and .provxml ones...WHY?! I don't think it's good, right? Where is my fault?!
SO SAD...
PS: I've searched a lot but I've not found a netcf prepared package to cook...
Thanks a lot!
GriFolle said:
Please, excuse me for my stupidity...BUT I REALLY NEED AN HELP!!!
(I'm following this guide: http://forum.xda-developers.com/showthread.php?t=413782&highlight=kitchen)
Here's what I do:
1) I've downloaded from htc site the last official stock rom (localized for my country) \HTC Touch Diamond\QMR\RUU_Diamond_HTC_ITA_1.93.408.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
2) I've extracted all files and putted them into Base ROM folder of surface kitchen.
3) clicked on begin and obtained some folders in the kitchwen one
Now if I go into one package folders in OEM (htc gesture in example) i can't see dsm or rgu files, but just dll and .provxml ones...WHY?! I don't think it's good, right? Where is my fault?!
SO SAD...
PS: I've searched a lot but I've not found a netcf prepared package to cook...
Thanks a lot!
Click to expand...
Click to collapse
You have to create the packages!
Don't know the kitchen but it should be like this in every kitchen.
Also, you can check inside provxml file (notepad will do), maybe the rgu (registry entries) are set through provisioning.
tnyynt said:
You have to create the packages!
Don't know the kitchen but it should be like this in every kitchen.
Also, you can check inside provxml file (notepad will do), maybe the rgu (registry entries) are set through provisioning.
Click to expand...
Click to collapse
confused...
I think I have to create just the packages of apps I would to add...not even all the apps contained in the stock rom!
Looking and reading tutorials in this forum I understood that If I would (i.e.) add/rmv apps to my rom I've just to put its files in base rom and then (after extract all) add/remove what I want. Then rebuild.
But for all others teorically I don't do anything...Is this wrong?
PS: thank you for the previous reply
Thanks to Pawaj & pdamobiz:
ROM: :: hTc Arte and Love WM6.5.1 OS 23506 Build 23506.5.5.0 Lite
http://www.pdamobiz.com/forum/forum_posts.asp?TID=260048&PN=1
Download link:
http://files.pdamobiz.com/romcooker/pub/Pawaj/Arte_23506.rar
Go to Regional setting: and select English, originally set in Thai
I hope this is useful to everyone, a very big Thanks to Pawaj & his team
Perfbox added, I have no clue what this is and how it works, all I understand is it shows the ROM's performance
One more screen shot
One more screen shot
I will test this new ROM....
The last 23504 was good but not so fast than rom from dheewatara-s
Speed is perfect indeed,an issue occured during open SMS(can not open/read SMS) when I installed chinese package,any solution or sugestion??
Can't find the file .exe
Hi guys,
Sorry for that question, but i download from the both links and i open the rar file, i just find one file on it: ruu_signed.nbh
No other files contain the .exe file to be excuted
please check it and let me know if i have a problem here, or there is a missing file in the link....
Thanks
egitto3000 said:
Hi guys,
Sorry for that question, but i download from the both links and i open the rar file, i just find one file on it: ruu_signed.nbh
No other files contain the .exe file to be excuted
please check it and let me know if i have a problem here, or there is a missing file in the link....
Thanks
Click to expand...
Click to collapse
Just Download Romupdate utility for artemis and place this nbh file there and falsh it
hi, flashed with this rom. feels better. any chance for different startup photo.... any cab files to change it...? tq
fxdadbrowser said:
hi, flashed with this rom. feels better. any chance for different startup photo.... any cab files to change it...? tq
Click to expand...
Click to collapse
You can install : Advanced_Configuration_Tool_v3.3.cab
or
You can use : SplashScreen.exe from you PC.
bbk said:
You can install : Advanced_Configuration_Tool_v3.3.cab
or
You can use : SplashScreen.exe from you PC.
Click to expand...
Click to collapse
thanx. are those files applicable in wm 6.5.1 ? Where can I get them? (links pl)
Testing this rom now....... so far all perfect. fast, longer battery life.......stable.
Only issue with me....how to add programs for the short cuts already in today screen???
need to install every app??? any other tweek????? tnq
anyone tested this ROM? any more comments pl??
I am using it now... look @ my home!!!
Looks like a very good ROM.
@fxdadbrowser,
Can you post a memory page screenshot, please?
Is this ROM fast?
Anyone knows how to get reid of Fornando Torres form the start screen.
rao1234 said:
Anyone knows how to get reid of Fornando Torres form the start screen.
Click to expand...
Click to collapse
Exactly !!! otherwise its a good ROM.....
@GSJCDX: SC of memory page @ current stage ( after installing numerous apps and themes ++)
Mmmm... looks like it takes a lot of Program memory.
Is it because you installed new apps and themes?
GSJCDX said:
Mmmm... looks like it takes a lot of Program memory.
Is it because you installed new apps and themes?
Click to expand...
Click to collapse
Thats right. I remember it was 47+ free storage and around 24 mb free program memory after flasing and resetting.
Hi all.
I have a Touch Diamond (bought in Denmark).
I have tried many cooked roms now and the best I have found than runs blazing fast is this one: httpREMOVE://forum.xda-developers.com/showthread.php?t=483539 - with danish language (hurray).. (cannot post links yet)
But, I find the apps that are preinstalled quite old and I would really like to update them (and maybe completely remove some apps).
Is this possible? I don't know anything about cooking roms. I downloaded Gen.Y's kitchen but with this I can't open a .nbh fil - only .erv can be opened.
I hope someone can help me. I have finally found a rom that suit my needs (well almost), but it is just a bit outdated..
Best regards from Denmark.
Use this to open the .NBH file
cdynu said:
Use this to open the .NBH file
Click to expand...
Click to collapse
Thank you very much for your reply.
I can open the nbh file with htcRIE.
I have found some programs in OS>IMGFS>SYS> and in OS>IMGFS>OEM that I would like to remove/update.
But that doesn't seem possible in htcRIE? I cannot delete any files..
Maybe this is harder to do than I thought?
Best regards from Denmark
Some .nbh files (roms ) are protected for delete ,change some files ; others no .
I am so close (I guess)..
I downloaded "Surface Kitchen" and got the rom file extracted.
I removed som apps.
I build a new rom - but here it goes wrong. Under the process it reports missing "boot.rgu" and something with XIP?
It builds the rom but it doesn't boot up on my phone, guess the boot.rgu file is some crucial
How can I extract the boot.rgu from the rom? Or can I use a boot.rgu from another rom??
Best regards from Denmark
Hi ,
Please I want the faster Android 1.6 for HTC Diamond
and thank
http://www.neopeek.com/de/forum/Android-ROMs/1733-ROMDonutNeopeek-Team-Donut-by-KeniaSuperFast!!
Halvarez, excuse me for stupid question but can u give me step by step tutorial how to install this on my htc td
Thanx
but can u upload the file form anther server like MediaFire
and thank you
1.6 or 2.2 Android camera and fmradio not works and charging prob.
you never use android in diamond corectly
I am don't use camera any way
because that I don't care
I want android for it have strong backup
A simple way to install this rom
1. download both files from original link provided up there.
2. unzip version 1 zip file for the whole folder with all the files you need.
3. unzip version 2 zip file and replace the original system.ex2 file with this new one.
4. copy all folders and files from unzipped folder (named Donut) to the root of your internal storage (for touch diamond).
5. delete ts-calibration file and copy-paste startup.txt from Diamond100 folder located in Startup Config folder.
6. simply run haret.exe to access android
enjoy
johnczhang said:
1. download both files from original link provided up there.
2. unzip version 1 zip file for the whole folder with all the files you need.
3. unzip version 2 zip file and replace the original system.ex2 file with this new one.
4. copy all folders and files from unzipped folder (named Donut) to the root of your internal storage (for touch diamond).
5. delete ts-calibration file and copy-paste startup.txt from Diamond100 folder located in Startup Config folder.
6. simply run haret.exe to access android
enjoy
Click to expand...
Click to collapse
Wow,you made it really simple
Can i use your answer when someone asks me how to install?(i'm not the best when i have to teach something)
Sure, go ahead.
where do i get the 2 filles from please?>
iDiamond said:
I am don't use camera any way
because that I don't care
I want android for it have strong backup
Click to expand...
Click to collapse
and charging prob ?
Android not works in diamond corectly man jus usable for tray
And android not good for other Android modele camera, fm radio not works
mancukya said:
and charging prob ?
Android not works in diamond corectly man jus usable for tray
And android not good for other Android modele camera, fm radio not works
Click to expand...
Click to collapse
oh guy ,
rally i don't use any thing you say
and any program I test on Diamond Android it's ruing
and I use Android 2.2 Froyo .
Android on Diamond is a Go
Its high time I feel a seperate section is opened for Android here. As this the most happening place for our little Diam. Also Android on Diam is closing to as stable as possible. With more users testing will encrouge more to develop.
Afterall you guys here made WM6.5 and Sense 2.5 work more stable for the Diamonds and hope they will continue to do so in android also.
What is the MENU key ? i've pressed them all, and nothing...
upd:
NEVERMIND... was using updated kernel... not the package one.
Sorry to HiJack the thread ! If you had to point at the most stable and fast 2.2 rom, what would it be ?