Related
Hello All,
Yes I am a newby here and I have tried to search for my answers so please do not flame me too bad.. I have an 8125 on Cingular service that has the origional ROM and I would like to upgrade it. I have reviewed the post and they are really hard to follow as they split off to multiple threads and almost always assume that you know the correct steps to follow.
Has anyone posted a "how to" for those of us that are new here? If not would someone like to talk me through it?
Thanks so much for your help
Mark
I take no credit for this whatsoever. I can only confirm that it works and you are able to return your phone to stock by flashing the stock rom from sprint.
ImCokeMan created the Patched SPL to unlock the Vogue. You can get the needed information from the ppcgeeks forums.
utexascg said:
I take no credit for this whatsoever. I can only confirm that it works and you are able to return your phone to stock by flashing the stock rom from sprint.
ImCokeMan created the Patched SPL to unlock the Vogue. You can get the needed information from the ppcgeeks forums.
Click to expand...
Click to collapse
Please attach file if you are going to introduce it. Thanks.
He mentioned PPCGeeks, it would be bad to place file here because the discussion would get fragmented.
Here's the link to my thread though:
http://forum.ppcgeeks.com/showthread.php?t=12255
Can this be used for Bell's CDMA Touch?
Thanks
510jungleboy said:
Please attach file if you are going to introduce it. Thanks.
Click to expand...
Click to collapse
How about you follow the advice and visit the other forum.... no need to post the files here when there's already a good amount of discussion on the unlocker over at ppcgeeks.
simply put, don't be an ass. You can either take another member's advice or you can choose to ignore it. There's no need for smart ass comments.
utexascg said:
How about you follow the advice and visit the other forum.... no need to post the files here when there's already a good amount of discussion on the unlocker over at ppcgeeks.
simply put, don't be an ass. You can either take another member's advice or you can choose to ignore it. There's no need for smart ass comments.
Click to expand...
Click to collapse
I'm not trying to be an ass, But it sounds like you're trying to be a SMART ass from your message above. You might as well close this thread, make it a sticky and put message titled, " Vogue Unlocker - Please go www.ppcgeeks.com and join their forum to talk about the unlocker, and oh yeah please register also so that you can be able to download and post messages in their thread ".
If you use common sense, you should know why they have DEDICATED forums. The purpose of a FORUM is for user not have to surf or float from place to places. Don't come at me like that..... I'm just trying to make things easier for new users.
Edited: Your first paragraph is fine, but your second one was just tooo fine.
uhm ... i have a HTC Vogue. Bootloader says "NIKI100"
That sounds like the touch dual aka HTC Nike then. this is for a CDMA phone
CRAP the flasher is gone!
no it's not i edited the link in the ppcgeeks thread now. It was just FTP dir change.
I tryed this Unlocker... at first I was having trouble getting the PC to reSync after unplugging an plugging back in. Got it to Sync, but then after it installs the unlock an restarts.. When it restarts it loads sum TELUS file, an goes back to normal. Any help?
Problem unlocking HTC Touch
I am using the vogue unlocker tool and for some reason my active sync discontects from the mobile device as soon as the update starts. What can I do?
link going to ppcgeeks
for those who are looking for a proper link
http://forum.ppcgeeks.com/showthread.php?t=20370
I can write the rapidshare link but you can learn more if you can spend more time reading this thread ( link given above )
sry guys am new at this but any of you know an exact link to go to so i can download an upgrade for my tmobile wing
i need help anyone please show me how to update my wing ty
Read here for more info:
http://forum.xda-developers.com/showthread.php?t=369397
Next time just try to search it in the forum.
Cheers
Try to search next time, or follow the link on my sign.....
wat is the best update for the wing and the link for it
and i also need to kno how to do cu i been lookin but cant find anythin please help
I give up...
sry guys am really new at this
You're the one that have to see the ROMs availlable and choose one that you like. For one people one is the best, but for other is other... Because all ROMs have different softwares, tweaks, etc...
Just follow the link that i gave and see wich ROMs are availlable.
In the same link there is a "How 2to flash" that explains you how to do it...
There is all on this link... PLEASE use it!
http://forum.xda-developers.com/showthread.php?t=369397
Cheers
does anybody have the iphone theme for the wing and instructions on how to do it appreciated thanks
The idea is
1. Read the forum ….a lot first get an idea on what’s what and how it works!
2. Go to the relevant sub section for your phone.
3. Read that forum a lot.
4. Search for the how to update my phone guide via the search function.
5. Follow the guide and then if your not certain or stuck THEN post a help request.
I think you will find that there are many different versions of the rom and you will want try the different ones yourself and see what works for you.
As a rule what one person thinks is the best thing since sliced bread the next will think is a pile of manure you ultimately will need to make a decision and once you have followed a guide (and I do mean follow to the letter) and seen how easy it is to do you will feel less worry about the process.
Have fun
Hey guys,
I was using Unsigned-Hard-SPL-Diamond-OliNex to flash b4 installing the new rom. it is showing 100% done and my phone reset, and all look fine...
however when entering bootloader screen it is showing me the version as 1.34.00 (sth like this), and check from the rom in the setting of the phone..it is still 1.34.xx (the original rom).
I was following the steps from some posts in the forums...but still the same..
Can anyone please help? sorry i am a newbie to pda phone...
Thanks again guys
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
I have a similar problem. When i made HARD SPL everything is ok, but when i try to make a ROM update there is an error massage on the screen. I tried with 2 or 3 ROMs and always the same ****... I downloaded the official one and it's the same... I made printscreen here it is ---> http://img29.picoodle.com/img/img29/4/7/2/f_gggm_0346e0b.jpg any ideas ?
maybe you installed the rom using sspl and hard spl did not install when you tried to install it. Not sure if this is possible.
Let check the Hard-SPL installed:
press volume down and soft reset (small red button) together and keep until comes out the 3 colored band in the screen, read the Hard-SPL version, it must be 1.40.
Let us know, ciao.
that's the windows error message saying it needs to close.. what's the error message the RUU gives.. it should have a number, or description of what happened. sure your download is not simply corrupt?
Well I have downloaded it 3 times already and every time i tried to make ROM update after HARD SPL my device cannot make upgrade and this error massage is on the screen.. I made soft reset after HARD SPL and there was no 3, but 4 colors on my screen...I thought that I ****ed up the phone, but for my luck I'm not hehe. BUT The f***in version is the same:
ROM version: 1.34.831.1 WWE. ROM date: 05/25/08. Radio version: 0.93.25.NS16. Protocol Version: 52.24.25.08H.
Please help, I don't know WTF!?!? That version is just NO COMMENT!
Thanks...
yeah can you please state the exact error message that comes up?
also, can you confirm you have Hard-SPL on your device.. if so, which version? (signed or unsigned)
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Yea after i followed the steps it is working all fine for me. I think my original problem is the way to enter boot loader screen, but then during the flash of the signed rom (1.37.456.2) i found that the version for boot loader is SPL-1.40.OliNex .
Now all is working fine, thx guys!!!
1 more question, if i have the hard spl installed, flashed a new rom. What should i do if i wanna flash another rom? (let say, after RUU-1.37.456.2 i wanna flash 1.37.401.3). Should i sspl and hardspl and install the new rom? Or i just simply install the new rom without hardspl again?
Thanks again!!
no, hard-spl is 'permanent' on your device unless you manually revert to stock SPL or something..
just flash another ROM without flashing Hard-SPL again
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Could you please stop flashing your site all the way here? Here at XDA there is a lot of info how to flash your phone, it is not needed to flash your site all the time here. One time is enough.
i'm not 'flashing' my site.. if one time was enough he would have already gone through the guide. i didn't even MENTION the site, either, simply gave him a link to the guide. if you take time to read the thread you'll find that it actually helped him get hard-spl on his diamond which is why the site was created so we can minimize these kind of questions and threads in the forums.. if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Thankz guys thatz helpful
racerx_ said:
if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Click to expand...
Click to collapse
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
sumitescp said:
maybe you installed the rom using sspl
Click to expand...
Click to collapse
not possible, at all, and don't try either, you could screw the device up if you try to flash a ROM we signed.
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
Is it me, or does his site look like a rip-off of mrvanx.org ?
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
ya, ridiculous cause there is no step by step upgrade guide with pics in the forum, and yeah all the info was there, but obviously some ppl have trouble reading so i gave him the info he needed. You on the other hand have yet to say anything helpful in this thread. So stop being a troll and post something useful. this will definitely be the last reply i waste on you
Olipro said:
Is it me, or does his site look like a rip-off of mrvanx.org ?
Click to expand...
Click to collapse
i think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
racerx_ said:
...I think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
Click to expand...
Click to collapse
I like the site and the content. Update it always like MrVanx did before to his info site. There's no harm done here.
I have been looking through this forum and havent come across exactly how to install a new ROM on my t-mo dash... So I am sorry if these are dumb questions... But I do have a touch pro 2 and they explained to me how to install a new ROM on it. Is it the same concept for the Dash? Do I have to flash it with an SPL? If someone could explain all this to me it would be appreciated, or if you could direct me to a part of the forum that will assist me. I want to change the ROM on my dash for practice before I do my TP2...
I'll explain the forum has a sticky & the top take your time to read........... Does say read before posting so as to stop ?'s that are already answered........
The choice if HSPL is yours most people don't but is available in sticky, the noobs guide to flashing is there too.
Good luck.
stylez said:
I'll explain the forum has a sticky & the top take your time to read........... Does say read before posting so as to stop ?'s that are already answered........
The choice if HSPL is yours most people don't but is available in sticky, the noobs guide to flashing is there too.
Good luck.
Click to expand...
Click to collapse
I couldn't have said it better myself