Develop Bugs

does NE1 have the answer to wifi not connecting to the net

im trying to get an internet connection through my wifi connection. i have done search's and lots of people seem to be asking the same question but nobody has the answer.
at the moment i can access my c: using an application called Resco explorer. but i can not connect to the internet. im not sure what setting i should have on the wifi manger and on my pc. im also using AOL as my isp.
PLS PLS help :lol:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????

looks like a no then

I got mine working but setting my wireless network adapter to connect to "Work".
Under Settings>Connections>Tasks>Manage existing connections>Proxy Settings> check the "This network connects to the internet" box
then
Under Settings>Connections>Advanced>Select Networks> "Programs that automatically connect to the internet should connect using:" to "My Work Network" (and the same with one for private network)
Also in your active sync settings, make sure your connection settings allow network (Ethernet) and RAS connections.
From previous research around this, i'm pretty sure you can only use the internet pass through under "WORK" settings only.
*thought i'd better register and contribute as i've gained a fair bit from this forum.

no good anyother ideas. i have searched through hundreds of threads and still no go
help pls

Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings.

i have done this on both my wifi network and my isp network.
still not working

Have you checked if you're getting an IP address from your Wireless Router's DHCP server? Also DNS settings and Gateway address should be there.
You can check this easily by using vxUtil (free )

these are my settings:
tiacxwln1 - tiacxwln compatible wireless
Ip address 192.168.0.2
subnet mask 255.255.255.0
default gateway 192.168.0.1
primary DNS 192.168.0.1
secondary dns
primary wins
seconfdary wins
DHCPs server 192.168.0.1
under serial usb
IP address 192.168.55.101
subnet mask 255.255.255.0
default gateway 192.168.55.100
primary DNS 127.0.0.1

Getting this error when I tried to allow my broadband connection to share with my wifi connection. If I unplug the wifi connection and try and share with another network I don’t get any errors.
Internet connection sharing (ics) cannot be enabled due to IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1 please ensure that no other client on the network is configured to use 192.168.0.1

hmmm ... ever had the same problem. all devices are able to connect to the same router except mine sx66.
then i change the router's channel to '1' .. tada .. now everyone is connected. it might sounds silly, but it worked for me.
try changing your ap wireless channel.

Re: does NE1 have the answer to wifi not connecting to the n
robboy said:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
Click to expand...
Click to collapse
i found the problem with activesync 3.8 and 4.0 somehow, so i reverted back to 3.7, now wifi can sync.
afaik, connecting to internet has nothing to do with activesync. its a direct connection to wifi router. use work location and check the proxy settings if u hv any? (at home i use connect to internet without proxy, at work i use connect to internet with proxy).
Also, for Activsync with wifi, make sure that the WINS server address is that of yr PC u want to sync with.

BUG? in ActiveSync configuration on WM6?

When configuring Activesync, you would choose which connection for it to use to sync with exchange server and in the WM5 I would pick My ISP but on the WM6 "Internet" is the only options in the drop down menu.
Shouldn't it be listing all avaiable connections you have added in the Connection settings?
Maybe a bug? or is there a setting where I select connection type for "Internet" on WM6?
Thanks
Bill

In the connections dialogue you select what My ISP (or whatever you use, i.e mine is 'O2') connects to, which is usually the internet.
When you set activesync to connect via the internet it will use ANY connection which does just that. So if you are connected via the USB to your pc it will connect to the internet through that. If you are disconnected from your PC it will use your GPRS instead.
I dont think it is a 'bug' really. Does your activesync work as desired?

mrvanx said:
In the connections dialogue you select what My ISP (or whatever you use, i.e mine is 'O2') connects to, which is usually the internet.
When you set activesync to connect via the internet it will use ANY connection which does just that. So if you are connected via the USB to your pc it will connect to the internet through that. If you are disconnected from your PC it will use your GPRS instead.
I dont think it is a 'bug' really. Does your activesync work as desired?
Click to expand...
Click to collapse
Yeah Activesync seem to be working fine but in WM5 it wouldn't work with connections that uses proxy and it would allow me to select a connection in the drop down menu that doesn't have proxy setting ie "My ISP"
Perhaps the new Activesync now works with proxy.
As far I can tell it's working fine.

Mine does not - I have to manually use activesync to get mail from the Exchange Server. Push does not seem to work. There is another thread on this here:http://forum.xda-developers.com/showthread.php?t=297781
It is really annoying me at the moment as I canot find a workaround.
It seems that activesync can find the GPRS when I do a manual Sync, but has a warning that i do not have a cellular internet connection. Odd. I originally used the Orange .cab files to set up the connections, I then deleted them and recreated the connection manually which made no difference.
Any ideas would be welcome!

I have a similar problem. I'm not sure if it's the same or not. Help would be appreciated...
When my Hermes is roaming everything in hunky-dory, GPRS, HSDPA, Push-Email... all is running smooth. BUT...
When I Activesync (I have "Allow wireless connection on device when connected to the desktop" unchecked - as advised in this thread), the hermes initially drops any wireless connections, then, instead of using the PC's broadband (as per WM5 & Activesync 4.2) to sync with Exchange it tries to dial up to GPRS again. Sync ultimately fails with error code 85020006. This webpage says the problem is "The Connection Manager could not find a path to the destination.
- OR -
Unable to connect. Verify your dialup or proxy settings are correct, and try again"
This is annoying as I have SPB Insight installed which I want to use the PC's connection to update all the channels, as well as sync with Exchange.
EDIT: I tried this before among other things and it didn't work but now it seems to be working OK. The only thing I can think that has fixed it is changing "This computer is connected to:" The Internet

well i also have WM 6 installed on my device and when i configured AS to sync with mail2web exchange server it stopped accessing the Internet when connected to the PC via USB/ AS.... whenever i try to access the Internet when the device is cradled the device opens the GPRS connection and connects to the net.... how do i get AS to connect to the net when cradled and not GPRS... and the exchange sync gives an error MSG 85020006...
someone please help me.... its really very frustrating not being able to connect to the net when connected via USB/ AS...
thank u

nahguam said:
I have a similar problem. I'm not sure if it's the same or not. Help would be appreciated...
When my Hermes is roaming everything in hunky-dory, GPRS, HSDPA, Push-Email... all is running smooth. BUT...
When I Activesync (I have "Allow wireless connection on device when connected to the desktop" unchecked - as advised in this thread), the hermes initially drops any wireless connections, then, instead of using the PC's broadband (as per WM5 & Activesync 4.2) to sync with Exchange it tries to dial up to GPRS again. Sync ultimately fails with error code 85020006. This webpage says the problem is "The Connection Manager could not find a path to the destination.
- OR -
Unable to connect. Verify your dialup or proxy settings are correct, and try again"
This is annoying as I have SPB Insight installed which I want to use the PC's connection to update all the channels, as well as sync with Exchange.
EDIT: I tried this before among other things and it didn't work but now it seems to be working OK. The only thing I can think that has fixed it is changing "This computer is connected to:" The Internet
Click to expand...
Click to collapse
This solved my problem....thank you so much!

Remote Desktop Mobile

I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?

digitalfx said:
I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?
Click to expand...
Click to collapse
make sure the connection is active before attempting to connect... so kick up internet explorer or something that initiates the connection...

I have a connection, I can see it go active then I get an error.
I tried as you suggested, the error just comes up immediatly.
ERROR:
Cannot Connect. Likely reasons are:
1. Specific Computer name does not exist
2. A network error occurred while establishing the connection.
Works fine when using WiFi or when connected to PC via USB...wont connect while on 3G

digitalfx said:
I have a connection, I can see it go active then I get an error.
I tried as you suggested, the error just comes up immediatly.
ERROR:
Cannot Connect. Likely reasons are:
1. Specific Computer name does not exist
2. A network error occurred while establishing the connection.
Works fine when using WiFi or when connected to PC via USB...wont connect while on 3G
Click to expand...
Click to collapse
mmm...i think i know your problem...
Click Start > Settings > Connections > Connections > Advanced > Select Networks... now what connection is specified in the 'Programs that automatically connect to a private network should connect using'
that should be your 'GPRS Connection' you are using to connect to your IP WAN

thanks, I had that set wrong...but still cant connect.
my 3G is setup as ISP (Cingular)...I called it "ISP"
The advanced setting had a preset called "My ISP", so I re-setup my connection and called it "My ISP" and selected it in "Programs that automatically connect to a private network should connect using:"
still wont connect.

digitalfx said:
thanks, I had that set wrong...but still cant connect.
my 3G is setup as ISP (Cingular)...I called it "ISP"
The advanced setting had a preset called "My ISP", so I re-setup my connection and called it "My ISP" and selected it in "Programs that automatically connect to a private network should connect using:"
still wont connect.
Click to expand...
Click to collapse
did you use Custel's cabs to install the Cingular Settings??

no, those always caused problems as I am using ISP not MediaNet.
btw- should have mentioned I am now using Black IV Shadow and Radio 1.43.00

Possible reason: your networkprovider has blocked the port used by remote desktop.
We had to change the gprs connection point/address when we wanted to use vpn to connect to our corporate network.
Try to get hold of at telnet application for your device and connect to port 3389 on you remote desktop server.
nadreas

digitalfx said:
no, those always caused problems as I am using ISP not MediaNet.
btw- should have mentioned I am now using Black IV Shadow and Radio 1.43.00
Click to expand...
Click to collapse
ahh well change your signature
ok... umm let me think... i want you to re-create the connections without using the My ISP... create a seperate one for Cingular...

digitalfx said:
I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?
Click to expand...
Click to collapse
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.

GOT IT!!! Thanks

esseff said:
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.
Click to expand...
Click to collapse
esseff, pardon my noobness but when you speak of "VPN server" is that referring to the desktop I am trying to remote connect to?
I have an ATT 8525 w/Black Satin Normal WM6 on the ATT network using MediaNet as my GPRS.
I can remote in from almost any open network via my laptop. Could it be that ATT blocks 3389? If so can I alter the port RDM uses to setup a connection?

are you able to remote connect PC to PC? (from outside of your current LAN)
if not ... its not your phone its your firewall... try disabling your firewall w/in your pc os and router.
would explain why you can connect using wifi if its part of your router and its set up as a "home network".
I'd bet if you googled this you'd find EVERYTHING you need to know.

Yes, I can connect just fine PC to PC outside the LAN. I have my custom listen port opened as required. The issue is definitely with the 8525 connection settings or the ATT service. I have trolled google pretty extensively, but have been unsuccessful in finding some quality info.

AS 4.5 -> Internet passthrough (100s of solutions, but none is working???)

Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.

marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...

First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up

Two more tips:
1. Start/Settings/Connections/USB to PC - untic
2. http://pdaphonehome.com/forums/552203-post22.html

no proxy
walshieau said:
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
Click to expand...
Click to collapse
I don't use any proxy server for connecting to the internet, my PC is directly connected to a NAT Router, as well as my linux box and my girlfriends computer and all work perfect.
As for the activesync partnership, where do I see the type of my partnership or in other words, what is a "guest" partnership? The only thing I see is that my device is named "WM_marc1" and that activesync items sync perfectly but the internet passthrough won't work.
I hope you can give me further advice with this information. Thanks for you help
docles2002 said:
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Click to expand...
Click to collapse
My data synchronizes perfectly through AS 4.5 and I have already checked all items in connection settings. Of course my computer is connected to the internet (see reply to walshieau) and honestly IE and pocket IE have nothing to do with internet passthrough, it's all about TCP/IP subnetting, bridging, tunnelling or whatever method AS 4.5 uses for internet passthrough.

Sorry if i am not explicit...but i hope this helps. For my wizard i remember i had to install a reg on the PC. It did some changes to the Active Sync registry.
The bad is that i don't have that reg

marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help

ctrlaltdel said:
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
Click to expand...
Click to collapse
YES WORKS UNDER VISTA TOO
simply check the 'allow data connections on device when conneted to the pc' under connection settings and then plug the usb cable to pc.

Heres the Fix
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules

ZaJules said:
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
Click to expand...
Click to collapse
That's the one i was talking about, thanks i was going to need it too

Ok followed the procedures. I think anyone of them works. Mine worked by changing on PC activesync to "this computer is connected to: The Internet". Nothing else worked. I had the reg hack from the time of my beloved Wizard!

go to:
start -> settings -> connections -> advanced -> select network
make sure that
"programs that automaticaly connect to the internetshould connect using"
"my work network" and not "my isp"
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.

hsalah72 said:
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
Click to expand...
Click to collapse
on my hp 6828, it doesnt seem to have the usb to pc option/icon.
tried the first part selecting connect to work.
I'm stil haveing a problem. any ideas?

maymaymay said:
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
Click to expand...
Click to collapse
This one works for my TP
Goshh... I love this board !!
Thank you very much, maymaymay

Still not working
Why can't someone come up with an ACTUAL solution to this?
When I connect my Tilt to the PC it automatically passes the internet connection through the PC. I did the registry fix and tried all four settings (0, 1, 10, 11) and still my data connection on the phone is overridden by the active sync desktop pass-through. I turned off the advanced networking option and still it goes through the PC. I even went through all the settings in active sync for "This computer is connected to" even though that doesn't even look like it would affect which connection my phone uses. This seems more like a setting within active sync on the phone more than anything.
I use my phone at work for chatting on yahoo IM (with Palringo) since my company network is filtered. I use a program called MyMobiler to transfer the phone display and controls to the PC so I can use my desktop keyboard for the chat program instead of my phone's keypad. Since the network is filtered the internet connection on my phone is filtered too since it's passed through the desktop when I active sync it to use MyMobiler. Sometimes Palringo will hold the connection even after I've connected to the desktop and sometimes it won't.
Bottom line here is can someone come up with an real working solution to this problem that a LOT of people are having?
HOW TO DISABLE DESKTOP PASSTHROUGH WHEN CONNECTING WITH ACTIVESYNC. Search that on google and here and all you will find are people saying "Yeah I have that problem too" or people telling how to connect WITH desktop passthrough.

I have a similar issue. I have my phone connected to my work PC to charge / sync, but all Internet connections attempted by the phone are being routed through my work network until I unplug the USB.
Naturally, that's very bad since all Internet traffic is logged by my work and many sources are blocked. I have an unlimited data plan on my phone. Why can't I stay connected to it when I'm hooked to ActiveSync?
I read someplace that Windows Mobile has an order of preference where connections are concerned. Probably hard line, then wi-fi, 3G and then EDGE. Surely there must be some way to modify this order of preference.

The thread is missunderstood...
The problem here is give to the PPC internet via usb... providede by a PC...
The solution that REG (that works for me EVER!!!).
And now other one provide internet to my PC via usb on phone account

With apologies, I'm not sure I understood what you said there.
But, some of us are actually trying to stop receiving internet by the USB.
I would like the phone to initiate a wireless 3G connection even when connected to the PC. But, thus far, all settings I've tried still cause my phone to attempt to access my business network here at my company.
Big no-no.

have you finally solved the problem?
If so just like to ask if you have change your homepage in ppc? which is
file://windows/default_0409.htm?
and have not run your network wizard? then maybe I have the solution here
Reg key
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer/AboutURLs/
usually it is ( default value )
A.Blank value is res://webview.dll/blank.htm
B.Home_0409 value isfile://windows/default_0409.htm
C.version_0409value isfile://windows/default_0409.htm
if there is a new reg in that one try to delete that file again using a registry explorer ( depends on what you use to view the file)
turn it off for about 30 secs then soft reset... I hope this helps out

I'm not sure that addresses the issue, or mine at least. My phone disables HSDPA the moment I plug the USB cable into the phone and Active Sync takes over. It's before I even open a browser.
Not only does the phone start looking for Internet over the USB Active Sync connection, it looks for non browser related things like weather updates and sending mail to the gmail server.
Somewhere, it's coded to have an order of preference in what kind of connection it accesses. By default, it seems to look for any available land line connection, possibly wi-fi next, then 3G and then EDGE. I'd like to take the land line connection completely out of the equation.

How to share my pc's internet connection with my MDA Compact III??

Hey Everyone,
I have just upgraded my device to Windows Mobile 6 so I had to install Activesync 4.5 and I would like to access my pc's internet connection (which is adsl) when it is connected via USB. But when I connect my device via USB it doesn't seem to have access to internet at all even though it should be automatic as far as I know. I guess some things should be done in settings but don't know what they exactly are. Would you be so kind as to help me by writing every single step I should take to make it work?
I would also like to access my pc's net via Bluetooth but I think it's going to be more difficult to set. I have a bluetooth adapter with Bluesoleil software and I don't know what I should do to synchronize my device with pc via bluetooth using Activesync 4.5. I guess after making it work, accessing my pc's net via Bluetooth wouldn't be a big problem.
I hope you have ideas what to do.
Thank you for your help in advance!

when in settings->networking->usb to pc->enable advanced network functions is checked
and connetions->advanced->select networks is set to my work network
when ever the pda is connected to activesync using usb or bluetooth
the network which is being used is that of the pc
unless the pc is set to otherwise

Thanks for your short reply. I have done as you wrote, but it still doesn't work.
at settings->connections->connections->My work Network there are 4 things:
-Add a new modem connection
-Edit my VPN servers (I have tried to add a VPN server but didn't know the exact settings)
-Set up my proxy server
-Manage existing connections (I have also added a cellular modem connection and *99# is supposed to be dialled but I didn't do any other settings)
So I guess there are things here that should be changed. For example at VPN, what should be the name of the Server? My computer's name? and there's a part at which it requires a Username and a Password and also a Domain marked with a *. What should I write in these fields? The usernam and password that are set to connecting to the internet on my pc or something else?
I might have to check the settings of my as well, I guess. What settings should be checked on it?
Thanks in advance!!!

I might have to check the settings of my pc as well, I guess.*
Sorry I left out a word.

settings->connections->connections->advanced->select networks
dropdownbox is set to my work network
to spell it more out

It is set that way, but it still doesn't work. This is why I think I should change things either on my pc or in My Work Network settings (the 4 menu points I mentioned). But I did everything the way you wrote in your first reply and despite this fact it still doesn't work. So I'm out of idea