Develop Bugs

Please Help: Problems with charging!!

:?: Hello. I was wondering if anybody has had same problem as i have.
I work on my xdaIIs a fair bit away from home and as a result i need to recharge it every now and then. I have a usb charger cable that i use to charge it using other computers and also via a usb car charger pluggy thingy sorry cant remember name :lol:
The problem i have is that while i am charging my xdaIIs using this method the battery power starts running DOWN as if the power is being drained!!! The device is definately telling me its being recharged.
Please help... I have no idea what is going on???!!!
THANKYOU in advance. 8) :?

Depends what you are using to charge I had the same problem with a mini sync cable I bought sync'd fine but didnt charge but that because it was designed for an XDA not an XDA2 bought a new one from boxwave and its fine.
But certainly if your device is sufficiently drained it will be pulling more power that your PC's USB slot will be willing to give it so you could be running into that.

Novice Gadget Boy said:
The problem i have is that while i am charging my xdaIIs using this method the battery power starts running DOWN as if the power is being drained!!! The device is definately telling me its being recharged.
Click to expand...
Click to collapse
I would guess that the charger doesn't supply sufficient current to actually charge the unit. I say this, because I have seen exactly the same thing (= orange light on and the battery power level decreasing fast) when I built my custom charger for XDAII. XDAII is very "picky" and needs a lot of power to charge and the "USB car charger", as you described it, probably can't supply enough.

Thanks for the reply guys.
It used to work when i first bought it but now doesnt.
Any ideas on what i could purchase that WOULD work??

I have had a similiar problem with a similiar charging setup, but mine charges fine as long as the battery level does not fall too low, if it gets below about 30% then it seems to decharge instead of charge... its really strange.

Cigarrete adaptor charger Draining mine too..
I had a Ipaq 2210 installed in the handle bars of my bike with a Holux BT GPS, recently after breaking 2 of them( IPAQS) I've replaced with a XDA IIs, I had a cigarrete adaptor for the IPAQs and another for powering the speakers... as now i can't use the speakers (due to the horrible 2.5 jack)I've modified the supplied connector for charging without the craddle to fit the connector for the speakers...
I realized from time to time the XDA turned it self off... and last travel it just died with the orange led on and battery 0%....
However first time I've used it was a 700km trip (paris - switzerland) and that time had no pbm (once or twice it turned off but that was all)
I've noticed that the supplied wall power adaptor is a 2Amp one... which looks like enourmous to me... but i tought that cigarrete adaptors were not amperage limited (but for your battery and generator/alternator)
One think I havent tried is to cut the Ipaq's one and fit the connector there... as the Ipaq uses the same wall power thing perhaps the cigarrete adaptor will be the same too....
Please any advice for me ??
I would also like to mod the suppplied connector into a usb stand alone sync cable (pls advise on it too....)
Also i would like to fit an Ipaq IR led onto the XDA to use it as remote for my digital rebel camera.... (advice again?)
Thanks in advance
N

Where can I buy a working car charger for the Exec?

I would like to get a car charger that works with the O2 Exec when I am running navigational programs such as Garmin Que and TomTom. I have tried more than 5 chargers but no luck thus far.
If anyone has any to recommend, do let me know. I am located in Singapore.

i use my car charger from my gps that is the Holux 236, the only think i have to do so that it starts charging is turn it off on the button and the led will change to orange, i have tried one other charger that has a usb plug and it worked fine ! So has long as it has a usb plug you'll be alright and if you do not find one look for the Motorola car plugs that it will probably work on Uni since it has a mini usb plug

The charger from M3000 works fine with my Uni
And the Motorola Mini-USB chargers doesn't work...

Hi, I found that this issue is connected with proper usb cable not with charger itself (usb mini have 5 connector but in some cables only 4 are connected and in some other cables all 5 are connected and so are the difference). I was also trying many chargers and no luck. But I ve tryied charger with other cable and suddenly all chargers start charging my jasjar.
Anyway, the bad thing is it stops whitout any reason so now charging jasjar in my car is a real mystery for me.
regards,
Piotr

Be careful if buying one with a double USB output - I bought a few different models hoping to power both Exec and the Holux GPSlim-236, but all failed. They would power the Exec, but as soon as the Holux was connected, it would always cause the Exec to continually reboot - fortunately "soft". Make sure the supplier will take them back if it doesn't work.
Try a car charger with a USB socket on the end that takes a separate Sync/Charge cable.

The problem is, the exec is very power hungry, especially when the batt is dead !! you need a high current charger at least 1A (1 amp) the charger used with the blackberry (I forget which model) is suitable as is the genuine exec charger obviously.

use O2 Atom car charge
O2 Atom car charge will work with O2 Exec as well as A/C charger from Atom

Exec/SPV car charger...
Got an o2 branded one today for the Exec/Mini - works like a charm (Charges my SPV and runs Tt at the same time) but cost me £14.99 for the privelage!

could you post a link to the website? I would love to purchase one but am currently located in Singapore and so far all the charges don't seem to work for me.

vapor said:
I would like to get a car charger that works with the O2 Exec when I am running navigational programs such as Garmin Que and TomTom. I have tried more than 5 chargers but no luck thus far.
If anyone has any to recommend, do let me know. I am located in Singapore.
Click to expand...
Click to collapse
I have one brand new that Imate sent me for a delayed process when i got my JASJAR repaired.Never used it either.Let me know if you are interested.Regards

southernint3l said:
I have one brand new that Imate sent me for a delayed process when i got my JASJAR repaired.Never used it either.Let me know if you are interested.Regards
Click to expand...
Click to collapse
I would love it but can you confirm that it would charge the phone while running navigational programs?
You can email me at [email protected] to discuss the price and shipping.

vapor said:
I would love it but can you confirm that it would charge the phone while running navigational programs?
You can email me at [email protected] to discuss the price and shipping.
Click to expand...
Click to collapse
Yes it does.I have TOM TOM navigation and IGO that i use.I have a 3800 Li-Ion battery.I plugged it in to see if it worked and it does.Has a green light and all.I will email you tmw.As i have just got done with a long day of data entry for work.FYI
Whatever you are doing with the phone,it charges while its plugged in.

southernint3l said:
Yes it does.I have TOM TOM navigation and IGO that i use.I have a 3800 Li-Ion battery.I plugged it in to see if it worked and it does.Has a green light and all.I will email you tmw.As i have just got done with a long day of data entry for work.FYI
Whatever you are doing with the phone,it charges while its plugged in.
Click to expand...
Click to collapse
sounds great. I have gotten your email and replied. Hope we can come to a decision soon and I can get my hands on the charger.

if anyone else has any for sale, do let me know as well.

Car Charger for UNI - how to make working
Hi All!
I've also tryed 2 diferent car chargers and 1 USB Pluggable Car Charger (some noname chineese 3-rd party) with 3 diferent cables, and one 3-rd party AC Power Charger. They ALL worked strange.
I can confirm that to make them all work I should:
1. Switch off the Universal;
2. Plug in the chgrer in to Universal;
3. Wait until the Red Light on.
Now I may turn the Universal On, and see the "Charging" battery status.
The reason and how to fix:
As you may see I used different adapters. All they have from 0.5 to 1.0A output circuit. But, the USB ports I used with my laptops have only 0.5A output and always start charging the Universal.
So, I dont think the output power is the reason.
The most likely - it is the "5-th pin" issue, which is mentioned above here. Can somebody provide information about power connection for the Universal?
It seems the solution is about to interconnect/short circuit 2 wires in the car adapter' cable to make the Universal charging in a usual way with any of my (your) "non-working" car adapters.
Also, I've noticed, that in a case the battery level around 30% and I plug in the "non working adapter" and no red light and system not is in the "Charging" state -- the battery is charging anyway!
Also, let me remind you about another issue that the Universal have: Active Sync (older versions) would not sync (USB Device not recognized error) if you plug in the Universal if the power is On.
To workaround that you have to switch off the Universal, plug the cable and after that you could successfully sync. The same symptoms? May be the same reason?

I would advice anybody not to mess with interconnections in USB, I mean stop soldering and checking because its shortest road to bricking Your precious jasjar. It can be done with proper cable and you have to find the right one ;-)
Secondly - I found that jasjar Rom is also responsible for charging issues. As I stated earlier I finally found good usb cable but later on I lost an ability to charge Uni. in the car. After upgrading to the Aku3.2 rom it start to charge immidiatelly. Same charger and cable - one time it charge, second time it dont. So additionally to cable theres something with soft with preventing Uni. from charging.

man why is it such a complicated issue to get the universal to charge? and it seems that this charging problem only happens to the universal and not any other device, am i right?

nabuhonodozor said:
I would advice anybody not to mess with interconnections in USB, I mean stop soldering and checking because its shortest road to bricking Your precious jasjar. It can be done with proper cable and you have to find the right one ;-)
Secondly - I found that jasjar Rom is also responsible for charging issues. As I stated earlier I finally found good usb cable but later on I lost an ability to charge Uni. in the car. After upgrading to the Aku3.2 rom it start to charge immidiatelly. Same charger and cable - one time it charge, second time it dont. So additionally to cable theres something with soft with preventing Uni. from charging.
Click to expand...
Click to collapse
YESSS! I Have upgraded to on of that Aku3.2 recently! May be it is the reason! But, my original Power adapter still charges my Uni so does the USB conndction to the laptop...
To ALL: Could you please confirm that you can use third-party adapters with the older ROMs?

hopefully we can get some updates soon.

Are all chargers alike?
Are all chargers the same? I would think that the USB power rating would be the same. So, I should be able to charge the Jasjar using a charger for a Motorola RAZR (if I weren't so afraid of blowing up the Jasjar)

Zenfone wont charge

yesterday i put my phone to charge while slepping and i had some technical problems with electricity in my home so the power kept coming and going so my charger got fried and my zenfone wont charge anymore with any adapter i tried using 4 others charge, tried connecting to pc, tried turning it on but still my zenfone wont turn on. when i press power button it makes 2 vibration it shows like its charging and the led than turns off. I know something in the phone got fried and i send it to service but they said they dont have parts, so im going to buy them online but i dont know what it got fried (usb port, battery or motherboard).
Sorry for my bad english and thnks in advance

Same here. I think i have the same, but my adapter haven't fried and is healthy 3 port wall charger. I have even changed the battery, cause of this problem. Asus shop send me a new one because of this, free of charge!
But even then it doesn't work. There are moments when i can turn it on and charge, but its random. I thought it was Android related, but haven't found out anything..
I can turn and charge it sometimes, don't know yet when..
But the Battery release i think helps (Unplugging Battery connector from battery, no need to take it out).
Have tried many of tips, guides, nothing.. Nothing helps..
I'm starting to think that mobo has been damaged somehow.
I got it one time to charge fully, don't understand how. Once i plugged in and saw that it charged at last, i didn't turn it on and left it there till full. Once charged it, kind of charged when i plugged in (at about 60% battery), and in Ampere there was normal Current (about 1000mA), but it didn't really charge, just drained..
Please guys, would appreciate this!
And a lot of people in youtube too. There has been no answer for this problem.

I'm assuming your already tried with different cables? If you are lucky and just the micro USB port section got fried, a replacement costs 5 bucks on eBay: http://www.ebay.com/itm/Charging-Po...169886?hash=item1a030a819e:g:aowAAOSwDNdVqKyi
When something in my ZF2 fried all of the USB data functionality was gone, but it would still charge at slow rate. I RMA'd it and after ~2 months they sent me a new phone; did not mention what exactly was wrong with the old one.
Then a while later I dropped it on the floor while it was charging - it landed straight on the micro USB cable side and the impact dislodged the USB port ripping some of the lanes off the PCB so I could not solder it back, and of course then it would not charge at all. I bought one of those charging dock replacements I mentioned and with that replaced it started working again.

It might be a damage data flex cable. That data cable with simcad slots and micro sd need to be replaced to be able to charges again and working fast charging.

my zenfone phone is not charging what do i do

[Elephone P8000] Phone won't charge after plugged in car DC charger

Hi everyone,
my elephone P8000 won't charge after plugged it with dc charger on my car (it was a faulty contact) i plugged another phone too witch still works.
My phone shows a message like "interrupted charging" so i buy a new usbcardboard (on aliexpress ) I changed it (but i have no welded the mic)
Since the phone still do nothing (and is not detected by computer)
do you think it could be the "USB Charger Board to MOtherboard FPC" that could be faulty ?
i precise the phone was still working after plugged it on the car ( but the battery was low, 5%) it shutdown and won't charge or boot since ...
any help would be appreciated
Sorry for my bad english (native language is french)

Up
Do you know how can i charge the battery without the motherboard ? I mean what is the type of the plug anyone knows how to charge the battery separatly of the phone ?

The same happened to me
I bought the same model. I'm able to charge batery in the new one and plug it into the broken one. So I am able to make a full backup and save the data. However I'm not able to do that through USB cable and computer.
I also tried to switch the USB Board Charge Plug Charging Port buth with no luck.
Here on the pictures is marked one spot - I thing it's broken / burned. Does it seem the same for you?
well.. as a new member I'm not able to insert a link to them...
Michal

You can buy an usb board on Aliexpress.
Its very cheap (about 6€ to try ) and worth money.
You can search for Elephone P8000 USB.
For example this one
fr.aliexpress.com/item/New-Eelephone-P8000-USB-Board-Replacement-Parts-Board-USB-Plug-Charger-Port-Board-Free-Shipping/32709374220.html
It isn't too hard to replace it then. If you need I can make some advice.

Switching the USB board does not fix the problem.
As I've already write, I did that with no success. As a new member I'm not able to attach an image, but the burned piece seems to be on te main board.
++++++++++++++++++++++++++++++++++++++++
arpax said:
You can buy an usb board on Aliexpress.
Its very cheap (about 6€ to try ) and worth money.
You can search for Elephone P8000 USB.
For example this one
fr.aliexpress.com/item/New-Eelephone-P8000-USB-Board-Replacement-Parts-Board-USB-Plug-Charger-Port-Board-Free-Shipping/32709374220.html
It isn't too hard to replace it then. If you need I can make some advice.
Click to expand...
Click to collapse

Charging Port !

Hello, So for past the month i am having problem with my fire phone. I live in Pakistan, Lahore so i bought it when it was not so famous and i did not get an original charger with it. I got LG Charger. But i was not at my house and i was at my cousin house and i had a small wire so i connected my phone with it to wall charger but my phone was hanging i charged it from there for 10 - 20 minutes (MY BAD). So i left my lg charger at home so at my cousin house there were couple of chargers and i used Lenovo one. Now i have been back and my lg cable was not working. So i started to search for cables and i found one that worked with my phone and it was giving pretty quick charge. Now lately it is not even working. Just flashing the screen with charging / not charging. So i tried wire of samsung and it worked! But i have to force it properly into port. So i am in pakistan and i dont think i will find a charging port easily. I wanted to know if the port is bent only or it is partially working can i just take it to repairing shop and have them remove it and place it again ? Properly ? Will it work or not ?

I think your charging cable doesn't have some pins in his head, you should try to charge the phone in fixed position, don t move the phone, try more position, move the cable's head when is connected, left and right.

I am having the same problem