Camera does not work - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi,
the camera on my Rom is not working, why?
I always use the same OEM package.
Missing a file?
with friendly greet
starbase64

whats the error message you get if any? which kitchen are you using?
i dont see anything wrong with this OEM package, but ofcourse i am not an expert cook. But I couldnt get the camera work with 19588 build kitchen that is out here....

Hi,
the error message is simple:
Unable to start Camera
Unable to initialize Camera
Rom 19209
PandoraKitchen
wfg
starbase64

My cam does´nt works too.

have you tried a different oem package to ensure that its not a camera fault?

Related

Hermes Camera CAB / OEM?

Hi guys,
Am doing my own ROM and would basically like to completely drop the entire contents of the OEMAPPS folder (I'm using the WM6 Dopod ROM for OEM and Abusalza's WM6.1 kitchen for SYS). This is pretty much because as far as I can tell everything in there could be installed by CAB later and most of it has updated versions available. However, I want the camera, which is in there...
Could anyone direct me to a Hermes camera CAB or OEM package (CAB preferred)? I've located a few camera cabs about for other devices and have tried a few but can't find one that works on the Hermes...
Cheers for the help...
You should be able to use the Camera OEM files from Pandora Kitchen. Or for that matter any other Hermes Camera OEM files.
Ive completely removed the camera from my ROM, added ateksoft coolcam instead...totally rocks.
Remember there aint just the HTC cam app that you can use!
mrvanx said:
Ive completely removed the camera from my ROM, added ateksoft coolcam instead...totally rocks.
Remember there aint just the HTC cam app that you can use!
Click to expand...
Click to collapse
And what of CoolCam version are you using?
I, it did not work: (
I have refused to run the camera.
He writes that it is not enough space in the repository
No FTP or there - not found CAB installing cameras. And in general, FTP why all canceled on hermes .

Problem: Re-cooking personal ROM (saving sounds and volume control)

I've been reading an gathering information for weeks now to build my own personal ROM. Since I'm unable (at the moment) to build one from scratch
Somehow it doesn't seem to work for me and I could not find an answer to my problems. I really hope some ROM Guru is willingly to help me out here.
I've used the Diamond Kitchen to extract the NBH files. And like it should it creates the OEM and SYS folders when you don't use protected ROM's like Dutty's, Swtos or Bepe's.
I've tried multiple ROM's to rebuild for my personal needs. And here are the most common problems I've encountered:
- Diamond (or Raphael) Volume Control does work. Even when it's included correct in the ROM. Reinstalling Volume Control after flasing using a CAB does work strange enough.
- The sound settings panel won't close after changing sounds.
ROM's I've tried to personalize:
- Panosha
- TOR (SubZero)
- SwiftBL
- VIC Lite
- And probably a few other ROM's I managed to extract (using the kitchen).
I've read some threads about the same problems but they seem to be part of a ROM thread instead of a specific "cooking thread". That's why I started it here.
Do you experience the same problems or do you have some good ideas than please let the rest of us know
I have the same problem
Everything seems OK, except the damned sound configuration.
If someone has an answer, we would appreciate it very much.
Thanks in advance...
Thanks for you reaction. Concerning the Volume Control, there is a way to get this to work. Just add a CAB that you call using the config.txt.
It's not ideal but it should work.
Unfortunately this procedure can't be repeated for the sound setting panel
I played with it a lot and even if I do nothing with the ROM, this sound config problem occurs. I extract the ROM and then rebuild it without modifying anything. This looks like a kitchen problem I thought.
I use Surface Kitchen v1.01. You another one, so this is a little confusing
Edit:
Maybe we can do the same without using those settings but direct in the registry?
Someone knows those keys?
Been using Kitchen 1.0.1 for a couple of days now as well. Updated the programs that were out of date. Did not help.
I also get always this error, could it be the cause?
iXiR said:
I also get always this error, could it be the cause?
Click to expand...
Click to collapse
HI iXiR
I also get the same error every time. I can not even cook the packages made with package creator. Some times I succeed but at the end it saye User.hv / custom.hv not found. Any idea?
thanks
tararura said:
HI iXiR
I also get the same error every time. I can not even cook the packages made with package creator. Some times I succeed but at the end it saye User.hv / custom.hv not found. Any idea?
thanks
Click to expand...
Click to collapse
Well, most of the times this fault is there, its a mistake with your new or edited rgu file like \\ or forgotten empty last row.
regards
Anja31
I recommend you guys try cooking the 1.93 official ROM .., i cooked a personal one for me .. no problems at all
iXiR said:
I also get always this error, could it be the cause?
Click to expand...
Click to collapse
this error is because you also have xip directory already listed in ur kitchen, so when the operation reaches that part of extracting the xip it dumps the xip and .dsm a.rgus, so basically a duplicate I dont use this kitchen but you can always press y to overite all
- The sound settings panel won't close after changing sounds.
Click to expand...
Click to collapse
Try adding this one to your registery:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\LSOMACORE]
"Dll"="LsOmaCore.dll"
"Prefix"="DRM"
"Index"=dword:00000001
reset and you will be able to change the ringtone/press ok on your sound settings
To make it work while cooking, just place this in a RGU file so it will be implemented in the ROM
Thanks will try that one as soon as I can.
Had one crazy thought. Since there are some replies from some real cookers here I was wondering about the next thing.
At the moment I always select option "1" in my kitchen. So I don't rebuild it (option "2"). It shouldn't but is it possible to have more success when using option "2"?
I tried all variants....
select 1 (yes) -> Access denied
select 2 (no) -> the message will appear for a lot of files... even when you always select 2 the ringtone panel won´t work
select 3 (all) -> access denied
So IMO it has no impact, which option you take...
I choose "1". I just want to cook the ROM.
Ah.. now I understand what you mean... the question at the beginning...
of course you have to select "1"...
I talked about the overwriting question (screenshots in post before)
First of all: thanks for this thread...I was going crazy with this issue..!
Has anyone tryied the reg.key posted before?
PS: @maccune...did you tryied to recook swiftbl?! How?! Is it not a protected rom??
Might be wrong about SwiftBL. Tried so many that I could be mixing them up
Tried so many because I hoped there would be one that would work just fine.
If it was up to me I'd use TOR v5 since it's basic and still a Diamond build.
Also the cooker told he didn't mind if people would use his ROM as a base ROM for your kitchen
duttythroy said:
this error is because you also have xip directory already listed in ur kitchen, so when the operation reaches that part of extracting the xip it dumps the xip and .dsm a.rgus, so basically a duplicate I dont use this kitchen but you can always press y to overite all
Click to expand...
Click to collapse
Hi dutty, what do you use to cook and protect your rom ? a made home version ?
Sorry, wrong thread...
Caspertje19 said:
Try adding this one to your registery:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\LSOMACORE]
"Dll"="LsOmaCore.dll"
"Prefix"="DRM"
"Index"=dword:00000001
reset and you will be able to change the ringtone/press ok on your sound settings
To make it work while cooking, just place this in a RGU file so it will be implemented in the ROM
Click to expand...
Click to collapse
Wohoooooooo!
It works... really great... perfect...
I also was going crazy to this issue....
now its solved.....
thx a lot.....
BUT: Another question: How can I add this as RGU File to ROM?

ARTEMIS & LOVE WM6.1 ROM V36 (Manila2D) - Build 20757.1.4.0

Google Translation: Vietnamese (automatically detected) » English
ROM 3.15.122.36 CHO ARTEMIS & LOVE = CE OS 5.2.20757 Build 20757.1.4.0 =
ROM version of the V36, WM6.1 integrated Manila2D for HTC Artemis & Love, characteristics:
- Develop and upgrade the V35
- Change the selection with 1 application (OEM) from the ship WM6.1 ROM for HTC ELFin
- Full XIP and SYS Ship WM6.1 ROM from the HTC Touch HD
- Use Manila2D for Skin and skin for WMP, Caculator of colleagues on the WiKi.
To function Manila2D active enough function, after Up ROM to install the CAB features:
- Opera
- YouTube
- GoogleMaps.
Download link has been introduced several times, you can find on the V35 or V34 posted by me
http://rapidshare.com/files/163420536/ARTE_WM6.1__3_15_122_36__B20757_HD.rar
Password: PhamQuang
http://www.sendspace.com/file/i7dnv7
Password: PhamQuang
How is the Build 20757.1.4.0 which is lower than the V35 built as V35's build is 20924.1.5.0. Another question is V35 was not compatible with Windows Vista, has that been fixed in V36. Also what is the .net version included in this version, I am asking this is because I like the advanced config tool.
Kindly answer the same at the earliest.
Regards,
Kailash
can pls give a download link for messenger live?
QuickGPS does not work install SeaSGEE instead
I found one bug on this so far, when you try to open QuickGPS you get the following error "The file QuickGPS cannot be opened. Either it is not signed with a trusted certificate, or one of its components, cannot be found" I tried reinstalling but does not solve this issue hence I am using SeaSGEE
this works better??
MMS install
MMS is not included in the rom. Anyone know which one works?
I tried all of them and were unable to get them working in V34.
Please help
hi everyone
can anyone provide some critical info which is not posted
1. free memory (RAM,ROM)
2. list of additional apps
3. uc compatibility (yes/no)
4. some specific info about the particular rom (if there are any stuff that are characteristic for it)
a lot of people won't try the rom if they don't get the basic info about it
thanks
Enhance compare with V35
1.Program Memory Total : 49.92MB , Free 20MB
2.The Interface of manila 2D now come with colorful and change the icon already.
3.All interface is black color
Worse
1.Quick GPS cannot on.
2.Dunnot can support Windows Vista Active Sync or not.
3.always pop up activesync although you close it.
...
fm radio canot start
if i start s2u2 and igo 2008 my device do not wake up, i have a black screen only
nbc8 said:
Enhance compare with V35
1.Program Memory Total : 49.92MB , Free 20MB
2.The Interface of manila 2D now come with colorful and change the icon already.
3.All interface is black color
Worse
1.Quick GPS cannot on.
2.Dunnot can support Windows Vista Active Sync or not.
3.always pop up activesync although you close it.
Click to expand...
Click to collapse
Hi, thanks, this is an interesting feedback.
Does anyone know if the album is still in landscape mode?
Since the v32, this album change his orientation
And V35 had a bug : When you clicked on a picture in the file explorer, the picture appeared just for one second, then u went back to the file explorer.
Does V36 correct this bug?
no better then v35
Smart Dialer
Smart Dialer on dial pad number is not exist.
I install this rom in my artemis and i like it very much but can someone fix the MMS, i cant receive and send!! thanks!!
shahdave said:
I found one bug on this so far, when you try to open QuickGPS you get the following error "The file QuickGPS cannot be opened. Either it is not signed with a trusted certificate, or one of its components, cannot be found" I tried reinstalling but does not solve this issue hence I am using SeaSGEE
Click to expand...
Click to collapse
Even I am facing the same issue, please let me know the solution if you find.
FM Radio
Can someone fix the FM Radio for this ROM, please!
HeZZZ said:
I install this rom in my artemis and i like it very much but can someone fix the MMS, i cant receive and send!! thanks!!
Click to expand...
Click to collapse
you can install Arcsoft MMS composer and configure for your network, it should work.
i think the guy tried all versions of arcsoft...but cant get it to work
dv8ted said:
i think the guy tried all versions of arcsoft...but cant get it to work
Click to expand...
Click to collapse
its working perfect for me after i installed Arcsoft MMS composer on this ROM
Camera not working
I am using artemis & love wm6.1 manila 2d. Why cant I record video? It says "Unable to start recording video. Unable to create video file." Need help...........plz.

6.5 21159 hangs on welcome screen.

Can anyone give me some insight on this problem. I am porting 21159 to the Treo 700wx, and it keeps stopping on the WM 6.5 startup screen. I can turn off/on the display, but it never progress onto screen calibration or anything else.
I have replaced the gwes.exe file in order to get the rom to boot, as well as wincenls_wwe, but it doesn't seem to make any difference. At the moment, I'm stumped. Any help would be greatly appreciated.
86 views so far, and no replies. That can't be good...
I think I might need a gwes.exe for 240x240 screen on a 211xx build. Does anyone have one?
Any progress?
untarded said:
Any progress?
Click to expand...
Click to collapse
Nope. No responses. I did find a 6.5 rom for the treo 750, but they removed all of the dsm files, so I can't port it. I have to try to manual piece it back together.
This is really a good build, but believe me that stabilniejszy is 21,109, this is fast
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
cruzzmz said:
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
Click to expand...
Click to collapse
not necessarily. i had the same troubles too and i got it working after including HTC's TouchFLO OEM package and ConfettiCore package (which i was deleting before) in SYS.
!Aman! said:
not necessarily. i had the same troubles too and i got it working after including HTC's TouchFLO OEM package and ConfettiCore package (which i was deleting before) in SYS.
Click to expand...
Click to collapse
both of the above is not in the rom? could you share the link of ur successful SYS folder somewhere
cruzzmz said:
both of the above is not in the rom? could you share the link of ur successful SYS folder somewhere
Click to expand...
Click to collapse
i think all of the SYS 21159 floating around have ConfettiCore package inside, so u can try any. i thought it was useless, so deleted it. but it lead to the problem mentioned above. in addition to that, i had to use TOuchFLO OEM package also of my device which i deleted coz i wanted to use M$ default touchflo.
!Aman! said:
i think all of the SYS 21159 floating around have ConfettiCore package inside, so u can try any. i thought it was useless, so deleted it. but it lead to the problem mentioned above. in addition to that, i had to use TOuchFLO OEM package also of my device which i deleted coz i wanted to use M$ default touchflo.
Click to expand...
Click to collapse
sad to say dude of of the rom now have protection on it including urs so i cant use package tool to make it to SYS folder ....
cruzzmz said:
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
Click to expand...
Click to collapse
Already tried this. Both are correct. It's not hangs on the boot screen. It's hanging on the welcome screen. Well it's not exactly hanging. I can still power it on and off. I still get the press the middle button to unlock thing. I can turn the radio on and off. It just never moves on from the welcome screen.
I pieced some of the 750 rom into my SYS. I noticed they had modified some of the .cpr files for 240x240, so I included those as well. Flashing now, we'll see what happens.
Update: Same problem. It stops at the welcome screen.
Tryed using my existing .rom folder, and shell32.dll and shellres.dll. Still no luck.
same problem since 21xxx builds with welcome-center
I'am a german rom-cooker for glofiish m800-device.
i work since over one week on windows mobile 6.5.
I'am not success today.
The Problem is:
- No Calibration (Welcome.lnk) is launched by initflashfiles.dat
but in the file the entry is included
the biggest problem, becouse the device is unusable
- The Startmenu is wrong, only a white screen open. (very small) no solution with gwes.exe from wm61 20924 sys.
- the grey taskbar on the today-screen
i have replaced gwes.exe from working windows mobile 6.1 sys 20924
i have changed shell.exe and shellres32.dll in shell-directory from sys
to change user.hv and default.hv from metadata
to delete user.hv and default.hv from metadata
to replace folder for shell
to replace folder for phone
to replace folder for redist.
to include wince.nls in sys-folder too
The wince.nls is in my xip (rom-directory) (my kitchen need the extracted version of xip.bin)
I don't know what the problem is.
I have ported XIP 21159 from Diamond, from TouchPro, from glofiish m700, from glofiish m500 and much more. I'am sure i use actually an VGA-XIP (from Diamond, 1.post in this Thread)
but i don't know which version this is (21139 or 21159 ???)
all the same problem.
i use my kitchen based on windows mobile 6.1 and included the g'reloc.exe from WM65 Kitchen (forwarder) and the wmreloc.exe.
since my kitchen is ready for wm65. all works great by compiling the new temp.dat (the flash-file for glofiish devices)
I read i must use the same sources for XIP and SYS !!!
But what are the same Sources ???
Can anyone send me an working 21159 XIP for VGA ???
When i try to port "Diamond Payload 21159" from XDA-Developers with Xipport and Xipporterex the xip is ok, but when i insert in my kitchen, the prog "buildos" stop their working, nothing happens in command-window.
So i'am very pleasent when you can send me an working source 21159 SYS for VGA and an working Source 21159 XIP for VGA...
i have big problem with windows mobile 6.5
acutally i try windows mobile 6.1 21114 there are the same problem.
the problem is, after os-logo no calibration screen come.
big problems to call "welcome.lnk"
only whenn i insert in wrong path to welcome.lnk the today-screen display ???
do you know this bug ???
here is the rgu of the welcome-center, i think it's not compatible with m800 ???
is this welcome-center new in the 21xxx-builds ???
over one week and no succed with wm65.
at the moment the same problems with wm61 21115
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:M SWelcomeCenter]
"0"="MSWelcomeCenter" ; class name
"1"="wcsan.exe" ; exe to launch
"2"=dword:1 ; perf hint (RAI_PERF_*)
"3"=dword:0 ; app type (?)
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome\CWelco meCenter]
"Disabled"=dword:0
[HKEY_CLASSES_ROOT\.wcml]
@="wcmlfile"
"Content Type"="text/html"
[HKEY_CLASSES_ROOT\wcmlfile\DefaultIcon]
@="browsres.dll,-6703"
[HKEY_CLASSES_ROOT\wcmlfile\Shell\Open\Command]
@="iexplore.exe file:%1"
[HKEY_CLASSES_ROOT\welcomecenterapp\DefaultIcon]
@="coreres.dll,-20797"
[HKEY_CLASSES_ROOT\welcomecenterapp\SelectIcon]
@="coreres.dll,-20798"
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Redirect"=":MSWELCOMECENTER"
[HKEY_LOCAL_MACHINE\System\WelcomeCenter]
"CmdLine"=""
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Group"=dword:1
hope you can help...
I'am at the end...
I think WM'Reloc is not compatible with my device ???
Thanks
Everal
everal said:
I'am at the end...
I think WM'Reloc is not compatible with my device ???
Click to expand...
Click to collapse
I had issues with it as well. I had to go back to using g'reloc.
hey guys any solution to this problem? I've been facing it on my Samsung i780.. damn this won't move past the Windows mobile logo.. yet it plays the welcome screen sound.. what a shame..
chef raven,
not trying to hijack your thread but can you please answer my PM.
i've been waiting for weeks now.
thanks

HTC Camera For Hermes Cab Files

hello where can i get HTC Camera For Hermes since the deviceupdate down?
i am installing crc roms without camera driver on it
thanks for ur support
kazuya_gonzalez said:
hello where can i get HTC Camera For Hermes since the deviceupdate down?
i am installing crc roms without camera driver on it
thanks for ur support
Click to expand...
Click to collapse
Here you can find most of the cabs, including the HTC Camera Cab in two versions:
http://www.4shared.com/dir/7650924/fd89e574/sharing.html
lynxxx said:
Here you can find most of the cabs, including the HTC Camera Cab in two versions:
http://www.4shared.com/dir/7650924/fd89e574/sharing.html
Click to expand...
Click to collapse
T_T there is no htc camera for hermes,, tried install all cab files but not working on my hermes
after trying installing all camera cab files, there is no htc camera for herme >.<
kazuya_gonzalez said:
T_T there is no htc camera for hermes,, tried install all cab files but not working on my hermes
Click to expand...
Click to collapse
I think, it's better, to look first in the FAQ in this Forum and the xda-Wiki for the basics, to understand what you do?
the cab file is in the "CAB Files"-folder: take for example this one: HTC Camera 5.04.29195.cab. Softreset. Or search here in this subform for the original camera.cab.

Categories

Resources