Hey folks! I have an HTC Hermes running WM6 with wap connection (behind Proxy). I've been facing two problems with my connection every since I started using HTC products:
1) I cannot setup my Gmail account on outlook. I have tried every possible way, and I read so many threads but nothing seems to work.
2) Weather on HTC Homeplug doesn't work, even on the N2A patched one.
I hope those problems are solvable. I think it has something to do with my wap connection( I live in lebanon, using ALFA service, if any lebanese guys are reading this and have made those two things work, please post the settings/work around)
I appreciate any help and thanks in advance....
I'm not living in Lebanon but I have a Hermes device and I had no trouble at all setting up my gmail account, it even grabs the settings automatically. I don't know where your problem is stuck but it could be in the proxy settings.
sure everything can be solved. which ROM are you using and which Radio version?
I'm using Schap's 4.31 and radio 1.16.00.00
however i dont think it has anything to do with those things, i'm positive it's a matter of proxy settings
Are you sure the PROXY you defined is used for INTERNET?
most service providers use the PROXY for WAP only.
Call your service provider and ask them
I think you`ll get the answer from them.
I know it's for wap only, isn't there a way to make those things work over wap though?
xbiggyl said:
I know it's for wap only, isn't there a way to make those things work over wap though?
Click to expand...
Click to collapse
It depends if your service provider allows it.
here in Israel we have one provider that allows access to the WWW using the WAP protocol and another Provider that blocks all DATA other then their own WAP site.
I checked the connection setup app on my device and found that it has the settings for <Lebanon/Alfa>. I think if you use this application, you might not be in need to setup any proxy.
if nothing works for you, then -as elivne said- calling your customer service would be a good solution
PS be careful with your mobile bill!
EDIT: visiting the ALFA website takes ages for the page to load, but I found this one on their website http://www.alfa.com.lb/mobconf/EMAIL/SettingsDisplay.asp?m=4&code=4&mobile=PocketPC&model=IMateJAM
Click on Start, Programs, Inbox
Click on Accounts, New Account...
Enter e-mail address:
Click Next
Auto Configuration Click Skip
In User Information Enter:
Your name:
User Name:
Password:
Click on Save Password
Click on Next
Account Type: POP3
Name:
Click Next
In Server Information Enter:
E-mail account type: POP3
Incoming e-mail server: The client should obtain his incoming server address from his ISP. (For Example: pop.idm.net.lb)
Outgoing e-mail server: smtp.alfa.com.lb (if via Alfa GPRS)
farres said:
I checked the connection setup app on my device and found that it has the settings for <Lebanon/Alfa>. I think if you use this application, you might not be in need to setup any proxy.
if nothing works for you, then -as elivne said- calling your customer service would be a good solution
PS be careful with your mobile bill!
EDIT: visiting the ALFA website takes ages for the page to load, but I found this one on their website http://www.alfa.com.lb/mobconf/EMAIL/SettingsDisplay.asp?m=4&code=4&mobile=PocketPC&model=IMateJAM
Click on Start, Programs, Inbox
Click on Accounts, New Account...
Enter e-mail address:
Click Next
Auto Configuration Click Skip
In User Information Enter:
Your name:
User Name:
Password:
Click on Save Password
Click on Next
Account Type: POP3
Name:
Click Next
In Server Information Enter:
E-mail account type: POP3
Incoming e-mail server: The client should obtain his incoming server address from his ISP. (For Example: pop.idm.net.lb)
Outgoing e-mail server: smtp.alfa.com.lb (if via Alfa GPRS)
Click to expand...
Click to collapse
I'm sorry to say that it didn't work..By the way I've tried it before and I did try it today,unfortunately it didn't work!
Related
Rogers Canada MMS/SMS/GPRS Settings?
Hi sorry if I sound like a real newbie but I am. I have only used a Blackberry for the last 5 years and nothing else.
I currently have a Blackberry on Rogers in Canada, and will be getting my Dash tomorrow, I will unlock it with imei-check, what else do I need to do in order to have it work like my blackberry, I get my email from a couple pop accounts and my work outlook which does support owa web mail. right now I sync my calendar and contacts with desktop manager.
Is it worth installing BB Connect and just get my emails like on my blackberry or is it better it use the Dash email tools? when using the Dash can I change my reply to address depending on the email account I recieved the email in?
How do I find my rogers settings for MMS/SMS/GPRS??
Thanks for any help! This forum is awesome!
G
Rogers
You should be able to point your ActiveSync server to your OWA server at work. Generally that works just like your BBerry if you enable Push Email (under the comm manager on your dash).
Thanks I tried that, but it won't let me sync to the owa server for some reason, most likely my it guys have blocked it.
I installed BB Connect and it wirks for receiving but I can not send it is greyed out.
here are the settings:
Click Start/Settings/Connections/GPRS
click Menu, choose Add
Description: Rogers WAP
Connect to: wap network
Access point: goam.com
User name: wapuser1
Password: wap
Primary/Secondary DNS: 0.0.0.0 (leave unchanged)
Ip address: 172.025.015.041
When you finish click Done.
Then make another new connection:
Description: Rogers Internet
Connects to: the internet
Access point: internet.com (vpn.com - for those like me who pay extra $10/mth. for real IP address)
User name: wapuser1
Password: wap
Everything under leave blank
After you click Done create one more new connection:
Description: Rogers MMS
Connects to: WAP Network
Access point: media.com
username: media
password: mda01
Pri-dns: leave blank
sec-dns: leave blank
ip address: leave blank
When you finish click Done.
From the connections menu select "Proxy"
Menu/Add
Description: Rogers WAP Proxy
Connects from: The Internet
Connects to: WAP Network
Proxy (name: port): 208.200.067.150:9203
Type: WAP
User name/password leave empty
Click Done.
(Proxy connection is not mandatory - things will work without it too)
Then go to home screen, click Start/Settings/Connections click on Menu select Advanced
Internet connection:
Automatic
Work connection:
Automatic
Wap connection:
Automatic
Secure wap connection:
Automatic
(it may be already like this)
Then launch Messaging (press on that button with the letter)
Select any of the listed accounts, click Menu, choose Options, then select Account Options/MMS.
Put the checkmark on these items:
Retreive Immediately;
Save sent messages (your choice actually);
Allow delivery reports;
Allow read reports.
Set Number of attempts to 2
Put Photo resolution to: QVGA (320*240)
Then click right softbuton "menu" and select MMSC SETTINGS
Again right soft buton - Menu/New
Name: Rogers MMS
MMSC URL: http://mms.gprs.rogers.com/
WAP Gateway: 172.25.0.107
Port: 8080 (or 80 - both worked for me)
Connects via: WAP Network
Max. Sending Size: 250K
WAP Version 2.0
I got this from www.howardforums.com
Thanks very much!!
I've entered all the settings you've listed and have been able to send an MMS, but cannot receive. Any thoughts as to why? It appears that the device won't connect to retrieve any messages.
Cruisin1966 said:
I've entered all the settings you've listed and have been able to send an MMS, but cannot receive. Any thoughts as to why? It appears that the device won't connect to retrieve any messages.
Click to expand...
Click to collapse
It appears the problem was with my SIM card the whole time. I can't receive MMS on any phone, Rogers branded or not. Once I put my wife's SIM int he phone, the normal settings I've been trying worked perfectly the first time.
GPRS usage monitor that works?
Can someone tell of any GPRS usage monitor programs that work on the Excalibur?
Never mind.
I found out that Efficasoft makes a special version for the DASh and some other phones here:
http://www.efficasoft.com/gprsmonitor_w.html
efficasoft
smartphone gprs traffic monitor
ver. 3.51w
I'vwe noticed that even when not having anything coming in, the counter slowly creeps up.
Never mind.
I was reading it wrong. I've only used 1.74Kb.
The other figure was the projected month usage at the current rate.
did anyone managed to get the today plugin working in other homescreens?
when I put it in my homescreen it is always on the very left position on the screen.
Well these are the settings provided by my service provider .. but i dont knw whr to appy this.....????
on my excalibur with wm5
Manual GPRS settings
Settings name Hutch_gprs
Home page http://www.hutchworld.co.in
Session Mode Permanent
Connection security Off
Data bearer GPRS
GPRS access point portalnmms
IP address 10.10.1.100
Authentification type Normal
Login type Automatic
User name <blank>
Password <blank>
just go to setting, connections, and there gprs, select new and follow instructions?
evow said:
just go to setting, connections, and there gprs, select new and follow instructions?
Click to expand...
Click to collapse
after doin this also the gprs is not workin.. is there anythin else i have to do ... to make it work.....
uncheck autodetect setting in ie?
is there an E or so mentioned above in the screen....?
evow said:
uncheck autodetect setting in ie?
is there an E or so mentioned above in the screen....?
Click to expand...
Click to collapse
Sometime it appears n sometime it disappears....
wht should i select wap/work/securewap/internet????
i have the same thing that it appears, and leaves again,
bo worry
Normally you should check internet connection?
my settings with connections:
name : TELENET
connect to : INTERNET
accesoint : internet.be
all the other fields are blank.
settings ie:
uncheck autodetect settings
slect network: the internet
save ; and im connected
i guess that ther must be something wrong with : portalnmms
maybe it is portalnmms.com/or other...
yea a E is on my screen.....
Manual GPRS settings
Settings name Hutch_gprs
Home page http://www.hutchworld.co.in
Session Mode Permanent
Connection security Off
Data bearer GPRS
GPRS access point portalnmms
IP address 10.10.1.100
Authentification type Normal
Login type Automatic
User name <blank>
Password <blank>
and they have mentioned the access point.. also...and selected the internet as my option but still its not workin .... doin a master reset will help in this case...........
I have TYTN with Schaps WM6 ver 3.57a
Has anyone know how to configure the VOIP to support Gizmo project?
i second that
When I had Schapps I never set up VOIP, but with Black Dymond way back when I downloaded and installed the SipConfigTool and set username at my Gizmo number 1747XXXXXXX, password as your own password, and the gateways as proxy01.sipphone.com (same for sip server, domain and realm if asked). If you use another tool and can set a stun server, set it to stun01.sipphone.com. Schapps probably has his own voip settings tool, but if you run a search on the SipConfigTool I'm sure it will still do the trick.
I was never very happy with the WM6 voip on any provider, and have since relied on fring, which I felt worked better especially for receiving calls reliably. See www.fring.com for more info. I've got multiple call in numbers in several countries through both Gizmo and Skype all of which I route through fring which I use with a 3G connection. Depending on the connection there's some mild latency, but I never miss a call and the Gizmo connections are far superior to anything I was able to get with just the WM6 client or Skype.
Quist you right also with Schap's Gizmoproject SIP account is working well for me with Shap's 3.54c
Shap's have the built-in SIP confiuration tools under "system tools"
please note that you can replace your number with your account name.
Was glad to find this thread, but a bit disappointed on how old it is and without resolution. I have an 8525, with Schap's on it. I would like to set up the Internet Calling built in to this ROM with my Gizmo Project information as if it were an ATA.
I also have an ATA at home, a Innomedia left over from Sunrocket days, configured and working with Gizmo.
I am particularly interested in using this with WiFi, and not over 3G.
Using the information on GP website:
http://support.gizmoproject.com/index.php?_a=knowledgebase&_j=questiondetails&_i=88
I have gone into Schap's Settings/Connections/VoIP to get the config screen.
Provider name is irrelevant, and I put in "gizmo"
for user account, I put in my area 747 number, both with a leading 1 and without. I have put in my correct PW.
For registrar address, I was unsure what to put in, and I ended up filling in the STUN information from the GP website: stun01.sipphone.com port 3478 / UDP.
Proxy is set up as proxy01.sipphone.com:5060 / UDP. <- sure that one is right.
The URI automatically fills in with the information from above.
However, I still can't make things work. I'm not sure if it is the registrar/STUN stuff that is messing me up, or if my userID should be some other variation?
Has anyone made this work, and if so, how? I have a feeling it is some silly setting I've just messed up here.
Thanks.
I'm pretty sure your username needs to include the domain. These settings are for a different phone, but should apply the same.
Profile Name: sipphone
Service Profile: IETF
Default Access point: [your WLAN AP name]
Public user name: sip:[email protected]
Use Compression: No
Registration: "Always on"
Use Security: No
--
Proxy Server: siproxy01.sipphone.com
Realm: proxy01.sipphone.com
User Name: 1747xxxxxxx
Password: [You SIPPhone password]
Allow loose routing: Yes
Transport Type: Auto
Port: 5060
--
Registrar Server: siproxy01.sipphone.com
Realm: proxy01.sipphone.com
User Name: 1747xxxxxxx
Password: [Your SIPPhone password]
Transport Type: Auto
Port: 5060
My q
vdub144 said:
Was glad to find this thread, but a bit disappointed on how old it is and without resolution. I have an 8525, with Schap's on it. I would like to set up the Internet Calling built in to this ROM with my Gizmo Project information as if it were an ATA.
I also have an ATA at home, a Innomedia left over from Sunrocket days, configured and working with Gizmo.
I am particularly interested in using this with WiFi, and not over 3G.
Using the information on GP website:
http://support.gizmoproject.com/index.php?_a=knowledgebase&_j=questiondetails&_i=88
I have gone into Schap's Settings/Connections/VoIP to get the config screen.
Provider name is irrelevant, and I put in "gizmo"
for user account, I put in my area 747 number, both with a leading 1 and without. I have put in my correct PW.
For registrar address, I was unsure what to put in, and I ended up filling in the STUN information from the GP website: stun01.sipphone.com port 3478 / UDP.
Proxy is set up as proxy01.sipphone.com:5060 / UDP. <- sure that one is right.
The URI automatically fills in with the information from above.
However, I still can't make things work. I'm not sure if it is the registrar/STUN stuff that is messing me up, or if my userID should be some other variation?
Has anyone made this work, and if so, how? I have a feeling it is some silly setting I've just messed up here.
Thanks.
Click to expand...
Click to collapse
put the registrar and the proxy the value - proxy01.sipphone.com:5060 / UDP
edward
edward: Have you actually gotten this working? Can you show us exactly what settings you are using?
In my setup VoIP program I have these options, and this is how they are set:
user account: [gizmo username]
password: [passwod]
registrar address: proxy01.sipphone.com
Port: 5060 UDP
proxy address: proxy01.sipphone.com
Port 5060 UDP
URI address: 1747[my sip number]@proxy01.sipphone.com
I am getting "no service" on the home screen. What have I missed?
gthing said:
edward: Have you actually gotten this working? Can you show us exactly what settings you are using?
In my setup VoIP program I have these options, and this is how they are set:
user account: [gizmo username]
password: [passwod]
registrar address: proxy01.sipphone.com
Port: 5060 UDP
proxy address: proxy01.sipphone.com
Port 5060 UDP
URI address: 1747[my sip number]@proxy01.sipphone.com
I am getting "no service" on the home screen. What have I missed?
Click to expand...
Click to collapse
user account: 1747[my sip number]
password: [passwod]
registrar address: proxy01.sipphone.com
Port: 5060 UDP
proxy address: proxy01.sipphone.com
Port 5060 UDP
URI address: 1747[my sip number]@proxy01.sipphone.com
also enable the option in Schaps VoIP Settings
in options Enable VoIP over 3G
or if you use only wifi connect first to the network
i am using schaps 4 RC with this configuration and it work ok
edward
Nice, I reset and tried again - seems to work now.
A few problems though:
1. The settings seem to be reset when you reset your phone. How do you solve this?
2. After completing two test calls successfully, I let my phone "go to sleep" and when I turned it back on I had lost connectivity for VoIP (no service). Do I have to keep it awake to be able to receive calls using this method?
gthing said:
Nice, I reset and tried again - seems to work now.
A few problems though:
1. The settings seem to be reset when you reset your phone. How do you solve this?
2. After completing two test calls successfully, I let my phone "go to sleep" and when I turned it back on I had lost connectivity for VoIP (no service). Do I have to keep it awake to be able to receive calls using this method?
Click to expand...
Click to collapse
1.The settings are not reseting when i reset my phone
2.dont have this problem
Gizmo5
Gizmo just launched a midlet for it's service.... I have it but haven't check to see if it works yet... this could be a good solution for some.
http://www.gizmo5.com
I think it what it does is call your phone first and when you pick up it calls the other phone... not 100% on that though.
Mark
Where do I put stun settings?
okay got it to work, however
, I need to use g.729 codec, is there anyway to do so?
how to open .jad
i got Schap's 4.0 there is no midlet service. so could i install the gizmo execution program such as .jad. by the way, anyone can tell me how to open the .jad on tytn.
thank you very much.
Have a T-Mobile (UK) MDA Compact III which I've just upgrade to B&B v.4.1. I also updated the radio to version 02.97.90.
My GPRS connection now no longer works. It'll just say "Connecting to GPRS..." for a while and then ends with a message "The remote party has ended this".
Using the following-
APN address: general.t-mobile.uk
Username : user
Password: wap
No domain
No proxy
I've also made sure the GPRS setting is set to PAP authentication.
I tried reverting back to previous radio versions with no luck either...
Do not crosspost!
what about running the network wizard again ?
mojo_333 said:
Have a T-Mobile (UK) MDA Compact III which I've just upgrade to B&B v.4.1. I also updated the radio to version 02.97.90.
My GPRS connection now no longer works. It'll just say "Connecting to GPRS..." for a while and then ends with a message "The remote party has ended this".
Using the following-
APN address: general.t-mobile.uk
Username : user
Password: wap
No domain
No proxy
I've also made sure the GPRS setting is set to PAP authentication.
I tried reverting back to previous radio versions with no luck either...
Click to expand...
Click to collapse
Hmmm username and password should be blank for a start.
Check the T-Mobile website under "phone support", setting up MMS, it details the GPRS connection settings. You have to go through a java applet, so I can't direct link I think.
Gajet said:
Hmmm username and password should be blank for a start.
Check the T-Mobile website under "phone support", setting up MMS, it details the GPRS connection settings. You have to go through a java applet, so I can't direct link I think.
Click to expand...
Click to collapse
You dont need to add a username or a password on the account, the reason you are getting the message is because of the username and password, just remove it and try again.
Solved...
I ended up phoning T-Mobile and it seems there was a GPRS issue in the Croyden area - their response was wait until tomorrow which I did and now it is working.
Thanks for all the helpful responses.
Has anyone got their s620 setup for O2 MMS on windows mobile61?
I have requested to have the settings sent to my phone via the website but it fails every time.
Can anyone tell me their O2 Pay As You Go settings so I can do it manually?
I know about this
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
Port number: 8080 or 9201
URL address: http://mmsc.mms.o2.co.uk:8002
Click to expand...
Click to collapse
But im still having problems
Thanks in advance
first!
no no seriously now...what are you on about mate?
l0lcats said:
first!
no no seriously now...what are you on about mate?
Click to expand...
Click to collapse
The settings your phone needs in order to send multi media messages.
Picture messages in other words.
If you goto
MMS > Menu > Tools > Options > Account Settings > Menu > MMSC Settings
the setting information I am after will be found there providing you are on O2.
Start>Accessories>Connection Setup?
hahaha
i gotta get some popcorn.
l0lcats said:
Start>Accessories>Connection Setup?
Click to expand...
Click to collapse
You obviously don't have a clue. So try not to bother.
MoneyFist said:
You obviously don't have a clue. So try not to bother.
Click to expand...
Click to collapse
lol! I posted that because you are the one that sounds like they haven't a clue!
oh the irony
Oh. Um....EW. A UK version of Shutterfly...for your "moe-by-el." http://www.filesaveas.com/mms.html
Yeah, no need. Take photos with your phone, transfer to your pc, upload to photobucket. WIN. 100% free too! Now that I know exactly what that is I kind of feel sorry for you...
ANYWHO. On a serious note, joking aside, this isn't the O2 support site/forum. You're better off checking with them/it or your carrier.
Here's this too: http://forums.somethingawful.com/showthread.php?threadid=2906323
gixxum said:
hahaha
i gotta get some popcorn.
Click to expand...
Click to collapse
No butter, lightly salted! Don't forget the MEGA Gulp! MMMMM Cherry Coke!
Hi
I flashed my 620 with the original BT rom and found these settings for GPRS and GPRS MMS, then put the “RUU_Excalibur_WM61_Kavana_080408_WWE” rom back in.
Go to Settings, Connections, GPRS and add the 2 following settings they seem to work, (will let you know when I get my next bill in )
NAME BT GPRS
CONNECT TO THE INTERNET
ACCESS POINT btmobile.bt.com
USER NAME bt
PASSWORD bt
AUTHENTICATION TYPE NONE
PRIMARY DNS 0.0.0.0.
SECONDDRY DNS 0.0.0.0.
IP ADDRESS (leave blank)
NAME BT GPRS MMS
CONNECT TO WAP Network
ACCESS POINT btmobile.bt.com
USER NAME bt
PASSWORD bt
AUTHENTICATION TYPE NONE
PRIMARY DNS 0.0.0.0.
SECONDDRY DNS 0.0.0.0.
IP ADDRESS (leave blank)
Oh. Um....EW. A UK version of Shutterfly...for your "moe-by-el." http://www.filesaveas.com/mms.html
Click to expand...
Click to collapse
Noo, the info I quoted in my first post was from that site
ANYWHO. On a serious note, joking aside, this isn't the O2 support site/forum. You're better off checking with them/it or your carrier.
Click to expand...
Click to collapse
No again, because I have tried and it seems there aren't many people with smart phones that are keen on answering there.
Thanks Si86. I will try cross over the BT settings for the O2 ones using that info.
i think i got the same. i want to use the o2 gprs that i get free on pay and go,
tried and tried even contacted them.
i have the s620 bt rebrand
in the settings i have put
NAME my o2 setting
CONNECT TO THE INTERNET
ACCESS POINT payandgo.co.uk
USER NAME payandgo
PASSWORD password
AUTHENTICATION TYPE NONE
PRIMARY DNS 0.0.0.0.
SECONDDRY DNS 0.0.0.0.
IP ADDRESS (leave blank)
what else do i do
and these connections settings aka internet, wap , secure wap and network how do you add or change them, keep in mind there isnt a accessories
thanks
ive been looking for the gprs settings for my phone
i got the settings once off a guy working at a local o2 shop but my phone had to have a hard reset and i lost the settings
ive been searching on google for lyk a week now im going to kill somebody if i cant find working settings
i know this part of the forum is specifically for dash's so i hope i wont get the same retard answers lyk "use the text service"
if anyone cud help i would be eternally eternally grateful
______________________________________________________
lol. i cant believe i didnt write the ROM and stuff
windows mobile 6.1 and pay as you go
What ROM you using? Are you on contract or pay as go, just that connection setup has contract, but the pay as you go is different and they block ports so no pop3 or imap4
I had to use a .cab on Tilt to set up pay as you go, the connection settings are available though.
http://www.google.com/cse?cx=000825...tings&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
Not sure if this .cab will work as only used on Tilt if not manual input it is. o2 are well cheaky with the 200MB package blocking email but i just use gmail in mini.
SMTP and IMAP4 works fine on PAYG O2 Internet for me, have the £7.50 Web bolt on and working through ProfiMail no problem - even SSL IMAP4 on port 993 works fine.
I think that O2 unblocked that restriction some time ago as it has been fine for me for almost a year. I'm using the standard PAYG access point details.
If the CAB doesn't work, the settings are:
Connects to: The Internet
APN: payandgo.o2.co.uk
Username: vertigo
Password: password
Should be all you need.
jeonatl3 said:
SMTP and IMAP4 works fine on PAYG O2 Internet for me, have the £7.50 Web bolt on and working through ProfiMail no problem - even SSL IMAP4 on port 993 works fine.
I think that O2 unblocked that restriction some time ago as it has been fine for me for almost a year. I'm using the standard PAYG access point details.
If the CAB doesn't work, the settings are:
Connects to: The Internet
APN: payandgo.o2.co.uk
Username: vertigo
Password: password
Should be all you need.
Click to expand...
Click to collapse
Thanks for info, i'll give that a shot but know that even recent posts people had same problem with o2 and u using diffeent port than the ones that blocked.
Well IMAP on the standard port 143 and POP3 also work fine, so suggest it may be a problem with their account?
good luck
if somebody could give me a step by step guide please.
Start > Settings > Connections > GPRS
Menu > Delete any connections that are there already, but if you have one that says "Auto configure connection", ignore it.
Menu > Add
Description: O2
Connects to: The Internet
Access Point: payandgo.o2.co.uk
Username: vertigo
Password: password
Leave everything else and press Done, and keep going Done until you are back at the home screen.
Make sure WiFi is switched off and try and use an Internet application. It should work fine.
Good luck!
Claro PR
I entered the wap settings in to my s620, Claro PR prepay unlimited w internet, and connected for about 30 seconds, i made a soft restart, then show me an error says: "the remote party has ended this connection" please any body help?? thanks....
Claro PR
I need the Claro PR WAP settings for my dash s620 unlocked, WM 6.1, thanks....