Develop Bugs

xda zinc rom upgrade

can somebody please help me , i need the new rom upgrade from www.see02.com
i cannot download this for my device is not recognised, by there system,
please help if you have the possibilty
kind regards
peter

I am having the same problem.

Same here...
Any helper please.....

pcsw said:
can somebody please help me , i need the new rom upgrade from www.see02.com
i cannot download this for my device is not recognised, by there system,
please help if you have the possibilty
kind regards
peter
Click to expand...
Click to collapse
well i would have told you how to get the rom if you wouldnt have provided a llink to a very dubious site

ROM for O2 Xda ZINC is it available and where ?
The link supplied is incorreect, below is the correct link for O2.
I have also tried to get the Rom to change my chinese version of Zinc to English version, and the message is I don't need the upgrade.
Any help anyone can offer on where to get the english rom would be much appreciated.
Here is the correct link for O2, http://www.seeo2.com/
www.seeo2.com
Thanks guys.

ralphyzinc said:
The link supplied is incorreect, below is the correct link for O2.
I have also tried to get the Rom to change my chinese version of Zinc to English version, and the message is I don't need the upgrade.
Any help anyone can offer on where to get the english rom would be much appreciated.
Here is the correct link for O2, http://www.seeo2.com/
www.seeo2.com
Thanks guys.
Click to expand...
Click to collapse
http://www.seeo2.com/user/template/UserDeviceRegistration_Prepare.vm?from=XdaZinc_RUU_Mar2007_WWE.vm
register with imei and download

I realy havedificulty to register.
is there any just link like the usual download link.(No need to do registration).

fallenczar said:
http://www.seeo2.com/user/template/UserDeviceRegistration_Prepare.vm?from=XdaZinc_RUU_Mar2007_WWE.vm
register with imei and download
Click to expand...
Click to collapse
Thanks for the advice.
Tried that already, the problem is that I need english on my phone, and living in Taiwan, the default is chinese. So anyway, after contacting the service dept, they told me that they regulate the IME numbers to the O/S therefore, you can not download a ROM that was not originaly shipped with the device.
Which really makes things difficult for me. Currently I am trying to negotiate with them to update the O/S themselves at the service centre, and would you believe, they have to get Authority from Head Office to make the change.
I really dont understand, its only a firmware image, and since I already bought the phone why are they worrying about what IME number runs what O/S.
Its beyond me.
So anyway, to anyone who is looking to CHANGE the O/S between languages it seems not that easy to do. Just buy the phone with the right language from the start and things will be much easier.

Please....
Please.....
Any holy hand........
is it that dificult????
or is it so new that none of the master herewent through this?

Well, after spending a total of 2 hours on the phone with O2 Asia, 3 different people the outcome is : "THEY SUCK!"
They have tried to tell me that it is NOT possible to upgrade the ROM image, and if I did change teh ROM image, it would VOID the warranty, what these things have in common is beyond me.
They are full of crap. I will NEVER buy a phone from them again and I strongly suggest to anyone thinking about it that there are many other alternatives out there, forget O2.
They are very polite but very very useless.
Their recommendation was "Return the phone" , and get another make.
So people keep away from these guys! That's my advice.

If I am in you posisition I would not think about the waranty right now.
The most important is to get the rom first then until you encounter a prob. you flash the rom to the original one that come in sales pack.
Thats it.
Don't forget to post here If you have got the rom.
Same with me either if I get it first I will post it here.

ralphyzinc said:
Thanks for the advice.
Tried that already, the problem is that I need english on my phone, and living in Taiwan, the default is chinese. So anyway, after contacting the service dept, they told me that they regulate the IME numbers to the O/S therefore, you can not download a ROM that was not originaly shipped with the device.
Which really makes things difficult for me. Currently I am trying to negotiate with them to update the O/S themselves at the service centre, and would you believe, they have to get Authority from Head Office to make the change.
I really dont understand, its only a firmware image, and since I already bought the phone why are they worrying about what IME number runs what O/S.
Its beyond me.
So anyway, to anyone who is looking to CHANGE the O/S between languages it seems not that easy to do. Just buy the phone with the right language from the start and things will be much easier.
Click to expand...
Click to collapse
have you tried registering on the site????
you should be able to register no matter what language your rom is....
it says within 7 days of purchasing your phone your imei no becomes available for registering

How come some some imei will be imidiately accepted, and some have to wait for 7 days?
Because I use my own imei and they say must wait 7 days, and I use my friend's imei they accept it imidiately and say no upgrade needed.
or maybe you're entering the wrong imei, like me tried more than 10 times. it say enter the right imei or wait for 7 days after purchase.

the IMEI will be accepted once you register it at the website but do keep in mind that the IMEI can be register on the country site only (i think) also as for the new ROM i think they have removed it since i couldn't find it anymore .... well i have uploaded the rom to esnips ... link down
http://www.esnips.com/doc/5a03b941-868e-45f8-a125-bcca46523b47/Zinc_WWE_RC4070131_3
but do keep in mind doing the upgrade might void the warranty

how to get bootloader for xda zinc
i just get newest rom for xda zinc for seeo2.com but when upom the creen said " cross-language not alowed" . now i wan to get in bootloader but i don know how can i get in
pls anyone can dot it and give advice\
brgds/meohp

meohp said:
i just get newest rom for xda zinc for seeo2.com but when upom the creen said " cross-language not alowed" . now i wan to get in bootloader but i don know how can i get in
pls anyone can dot it and give advice\
brgds/meohp
Click to expand...
Click to collapse
Hi, meohp. Can you also give me the eng WM6 rom?

Big Big Big problem new rom

Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!

You might have better luck asking for assistance on this subject in the Artemis upgrading forum:
http://forum.xda-developers.com/forumdisplay.php?f=318

andreazzo said:
Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
Click to expand...
Click to collapse
Hard Spl??? For the Artmes?? Mate are you trying to brick your device cause it seems you are doing a pretty good job of it too,Hard Spl is NOT for the p3300 it is for the Hermes and Trinity which are two very very different models of HTC. Please make an effort to read the Wiki before you start messing with the phone.Try flashing the t-mobile stock rom FOR THE ARTEMIS(WITHOUT THE HARD SPL) and hopefully it may work also find out from your buyer if it is CID unlocked though i doubt wether they would know.

Check in Settings - Connections - USB to PC that the USB advanced network functionality is not ticked. That's caught me out in the past after making changes.
This is assuming that others in this forum are correct and you've not yet made a brick using the wrong model. Good luck!

One problem more on rom
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye

andreazzo said:
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
Click to expand...
Click to collapse
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.

arvind09 said:
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
Click to expand...
Click to collapse
T-Mobile Here

Did you buy it in China?
If you bought the phone in China, there will be 2 versions. 1 for the chinese market (han huo) and the others are for other markets (usually europe) then flashed with the chinese rom (shui huo). As far as I know the chinese versions aren't locked and the foreign market versions musn't be locked either due to the fact that they have to put on the chinese rom

Offical Rom SSPL loadermethod for p3600 d810 m700 with noSPL noIPL noRadio

For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...

hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??

doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
LOL, sorry mate but that really IS a noob question

works perfect !
Thanks man

doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!

Thank's a lot Shadowmite,
Just one last question before I try :
You're refering to the "Hard-SPL_ZakMcRofl.zip" in your first post. On the other hand, I saw you opening a thread regarding the new "Hard-SPL 1.30 MFG - Oli.zip".
Which one should I/we use, or doesn't it make any difference.
Having a SFR/Vodafone s300+ I'm a bit scared as there's no genuine rom to downgrade back to in case I get blocked.
Bye

because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.

Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thank you so much!
I want to try this ROM right now, but I don´t have access to rapidshare-like sites here in my office.
Can someone upload this ROM to a public server ZIPped and RARed with password (to avoid proxy to sneak into the file... it's blocking some downloads...)
I can setup a FTP account. If someone can upload the ROM to my server, I can share the ROM with people who has the same problem with rapidshare-and-stuff sites.
Thanks!!!

installed the rom.
but....
now i want to return to the original rom and downgrading i obtain a vendor id error.
I tried to cid unlock the device also and the error i the same. any ideas that can help me?
thanks

junwei83 said:
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Click to expand...
Click to collapse
wow man ! thanks a LOT ! i really appreciate it
only a few ppl would stop and help
thanks again

racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
Tried with the Olipro and everything works fine.
Big thanks to all the people on this forum always ready to help.

Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thanx, process working...

Version of this rom?
SEA or ANZ?
Thanks

I've just updated the SPL with the one provided on this post...
It seem to be the Des’ Crash-Proof SPL...
I have this informations on the screen when starting in boot loader mode:
------------------------
TRIN100
IPL-0.50
TRIN100
SPL-9.99.CP
------------------------
which versions we have to use ??
I think that you previously talking about olipro ?
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse

ROM working but...
Hi there!
First of all thanks for the trouble of getting the nasty bits out of the bundle and giving us just the OS
But... (there seems to be always a "but" with WM6) I've been having some problems with this:
- VOIP is nowhere to be found, no SIP settings anywhere.
- Memory Stick corruption. From time to time my SDHC stick goes crazy, showing up strange characters for the filenames and only a soft-reset gets it back to normal.
- Did any of you guys manage to get Video Calling working?
Well... the major deal for me is the Memory Card issue... Anyone having the same problems? Any ideas?
Best,
M Addario
--
HTC P3600

any hard-spl will work for this repackaging of the release.. you're fine to proceed
yes, you have Des' crash-proof SPL
addario, there's really no need to post the same question in multiple threads..

This rom seem to not contain any ext_rom ...
The "Device Information" module dont report any EXT_ROM version ...
it's "normal" ?

The attached screen capture show the "Device information" tab.
There is no informations about the ext_rom.
I also cannot access to it thru Total Commander.
So... it seem that something is corrupted on this rom update...

Some Info....
@ Shadowmite
Dear could you please tell me from which version did you re-make this ROM & why is there no detail showing of ExtROM in Device Information.

Hi,
I'm completely new to all this but have done my best to try and figure it out for myself but I'd still like to make sure I've understood a few things correctly...
I have an SFR s300+ bought here in France. The OS is WM5 and I'd like WM6.
I have allready tried out the "off"+"camera button"= soft reset to see if I needed to install a hard SPL : I do. I've downloaded Des' Crashproof (due to the reassuring name).
I can now install that by following the guide without backing anything up yet...
Once done I will have to copy all my important info and then I will be able to flash any ROM of my choice (English, French, official or not) is that right? If I'm not mistaken and I can install any ROM, which English ROM is the best (this one looks good...)?
I'd also like to know if I have to install a radio after this or will the one I have at the moment (that works fine) be preserved?
If I do have to install a radio which do you recommend for SFR in France considering I sometimes go to Spain.
Thanks for your help

HTC.com WM6 update P3300

Just looking at the site www.htc.com and there is an update for P3300. Finaly.
Is there someone who update his/her phone with this update ????
(I will try it tonight )

Why nobody makes research before posting....

sorry,
i thought i was the first but you were right
(i was to excited )

Updated my HTC P3300
Fingers crossed while flashing my device, but it worked.
Updated my device with dutch rom from htc.com.
My device is quicker and is stable.
Tomtom is not updated in the ROM still version 6030
If you got questions ask me

i registered - but couldnt get the update as my serial number was registered as a HTC branded device but a T-Mobile UK. How else can i get this update?

snoop85 said:
i registered - but couldnt get the update as my serial number was registered as a HTC branded device but a T-Mobile UK. How else can i get this update?
Click to expand...
Click to collapse
check it out:
http://forum.xda-developers.com/showthread.php?t=333803
so far..

You can download it here http://rapidshare.com/files/61576956/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
I hope the nice cooks will modify it the best way

akismal said:
You can download it here http://rapidshare.com/files/61576956/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
I hope the nice cooks will modify it the best way
Click to expand...
Click to collapse
Forgive me guyz. Its been a while since followed WM6 for this device. I have just downloaded the english quoted above.
Can anyone please provide simple to follow steps to install this please. Much appreciated.
Snoop
//EDIT
Please ignore this post - Had i bothered to look, it was the very next post that did all the explaining *drops head in shame*. Thanks for the links guyz

Is anybody intrested in german ROM?

Hi folks,
if there's anybody intrested in german ROM, please let me know how to extract it from my HTC Dimond Touch.
Ciao, Buildex101

yeah, well done for posting this thread twice....

I am definetely interested! Unfortunately I don´t know how to extract the ROM, maybe one ofthe more experianced people can help.
ps: do you have the O2 ROM or the generic german ROM?

YESSSSS.. i am interested too, but i can not help u!
is it the XDA Diamond or the HTC Diamond? and which version?
Thanx in advance
WBR
Siemens Lover

Great Idea . I am also very ineressted.
Regards,
Tika

JanDaMan said:
yeah, well done for posting this thread twice....
Click to expand...
Click to collapse
I hate such since less comments. Yeah, now we know, that you are mr. perfect !

+1
HTC ROM prefered

Cendaryn said:
+1
HTC ROM prefered
Click to expand...
Click to collapse
same here!

Read the Kaiser Wiki or the dutch ROM dump thread here in diamond forum for dumping instructions.

I could also extract my original (german) htc rom - but i do not know how. if someone can put me in the right direction, i will do this.

No one uploads his ROM
OK let's start with some hints
first read this:
push me
post #18 shows you the way, but read from the beginning to understand the dump procedure.
The tool don't work ?
read this (point 6)

Come on guys, lasst es uns wagen..

i could give it a try - but is it worth trying since i only have the rom version 1.37.00.00? i think there's a newer rom out there, isn't there?

der_olli said:
i could give it a try - but is it worth trying since i only have the rom version 1.37.00.00? i think there's a newer rom out there, isn't there?
Click to expand...
Click to collapse
Yepp, mine is 1.37.407.2 GER.

JanDaMan said:
yeah, well done for posting this thread twice....
Click to expand...
Click to collapse
I didn't post it twice. The Website had problems I think. Because I did lose connection to it while posting. After that it was down. Ok, ok, it was my fault, that it was down, because I posted it twice, right?

buildex101 said:
Yepp, mine is 1.37.407.2 GER.
Click to expand...
Click to collapse
So it seems that YOU have to dump your rom However I did read that a higher number (1.37.407.2 > 1.37.00.00) does not inevitable imply a newer rom. Does someone know something about that?
Anyway I ask myself how it could be that the phone is out just a few days in germany and there are almost so much different rom versions?
Btw: Do you have an original HTC device or a branded one?

der_olli said:
So it seems that YOU have to dump your rom However I did read that a higher number (1.37.407.2 > 1.37.00.00) does not inevitable imply a newer rom. Does someone know something about that?
Anyway I ask myself how it could be that the phone is out just a few days in germany and there are almost so much different rom versions?
Btw: Do you have an original HTC device or a branded one?
Click to expand...
Click to collapse
It's HTC Touch Diamond (original and unbranded) - I'll try to extract the ROM.

Thanks... Can't wait to have the black TouchFlo

Ok, now I have 4 RAW-Files. Can anybody please explain me the next steps to do?

buildex101 said:
Ok, now I have 4 RAW-Files. Can anybody please explain me the next steps to do?
Click to expand...
Click to collapse
PLEASE, help this man. PLEASE Help us .