Related
Hi
I have just tried to update the rom on my xda exec (downloaded from the o2 microsite) it seems to load fine, but when i do a reboot I just get a wierd green & red speckled screen.
I have tried to update the rom twice now, once when the xda was on, & once from the bootloader screen.
Both times it seems to install correctly, but i get the strange screen.
HELP!!!
Add. My battery seemed to go to about 30% whilst i was updating. Could it be the battery? Can't charge it now to test. Can still get in bootloader screen.
PLEASE HELP!! Thanks
Same Here
I have exactually the same problem!
I downloaded the latest ROM from the My-XDA webiste (O2 Ireland) and it supports the XDA Exec as sold in UK and Ireland.
The upgrade goes fine but when I hard reset it just get a fuzzy screen full of red/green spots (lise interferance on a TV).
Have reinstalled the ROM from another PC and the same thing.
Can access the bootloader (v2.01) with no problem.
Have downloaded the ROM from another PC and tried from there and same thing?
Can anyone help?
Is there a known good ROM file that someone has used to rule out the file, as the XDA was fine until I ran the update.
Please help,
IrishLad
search be4 post
Update
I have tried 2 other ROM's on my XDA Exec and its exactually the same issue.
Once it gets flashed successfully and reboots i get the hazed screen which i cannot use. So its not the ROM file.
Has anyone got help with this, I have searched the posts already and found no solution that it why I have posted this thread.
Please Help,
Thanks,
IrishLad
So its not just me then! Thought I had cocked it up.
If this has already come up in these forums, I cant find it. Please at least send link to the previous problem if it is in here somewhere.
My XDA is dead!
Many thanks for your time & knowledge
Mark
try this one
try this configuration :
O2 XDA EXEC WM6 crossbow
Rom version : 2.02.00 WWE
ROM date : 03/10/07
Radio ROM : 1.15.00
Protocol version : 42.51.P8
ExtROM :UNLOCKED
have fun
the screen is funky but the xda is dead
I too am having this problem and am getting very frustrated.
I have searched the forum for hours and am not getting any closer to a sollution.
If anyone has resolved this problem in the past please send me a private message. I will love you forever if you do.
I had the same problem i think its a dodgy rom on the O2 website
I went into boot mode and used this ROM
http://forum.xda-developers.com/showthread.php?t=297256
Works a treat and is loads better than the normal o2 Rom
Thanks for the feedback
I have tried a few ROM's already with no success.
I will however try the ROM you posted and let you know if it works...
Thanks,
IrishLad
IT WORKED!
Not sure how, or why this worked.
But i installed the Crossbow ROM as listed previous and its working.
And can I just say the Exec is brillant now, its much faster, more responsize and works perfectly.
Thanks for the info, but I had tried 2 different ROM's previously and they never worked let I used one previously with no problems.
Either way I am now staying with Mobile 2006.
Thanks,
IrishLad
ukron is a god
YIPEEEEE!
IT WORKED
Thank you so much
I am very happy. Could you tell?
help
i have the same problem as you guys.
and more i can get my xda exec in to bootloader usb at the top and v2.01 at the bottom
but when i got to update it with the wm6 upgerade mentioned earlier
i get a connection error, please con somee one help
im using vista could this be the problem i have a hdd around some where that has xp on should i try that.
also i dont know is any of you knew but when ur in that messed up screen
if you press the lightbuld button a sort of i guess diagnostics or somthing screen pops up
Enable KITL NO
Clean Registry Hive NO
Formate Storage NO
you can change the no/yes's iv only got the enable kitl to do anything though. change it to yes buy using the buttons by the screen and then the center button it take you to the screen below
Select KITL Transport:
USB KITL
SERIAL KITL
ETHERNET KITL
Select KITL Mode:
ACTIVE
PASSIVE
any help with this will be appreciate
where can we find that crossbow wm6?????is that the one thats needed???
Someone please post a link 4 crossbow wm6 latest
would really b greatful...im it to me, email, or post it either way is good 4 me
THANKS,
Randy
no need problem solved....wm6 crossbow was def. needed
Hello everyone.
I have just bought my Hermes (AT&T 8525) after one year of planing so. It came with WM5. I downloaded some of the ROMSs, radio and bootloaders commented here. I tried reading all the vast infromation in this forum and the wiki, but still having a problem.
THE PROBLEM IS AS FOLLOW:
When I start the flashing process, using HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108.exe or RUU_Hermes_CINGULAR_WWE_3.1.57.502.1_6275_1.48.00.00_108
... everything goes well, until the progress bar appears in my PC. When it appears, ActiveSync in my PC closes and my Hermes goes to stand by (the lcd goes off) so I cannot complete the installation process.
The phone works pretty well and I'm really amazed for all its capabilities. But still, I'm stucked with wm5.
Why do you think this happened?
PS: I flashed the radio (1.51.00.10) and bootloader (HARD SPL v7). My ROM version is 2.15.502.3. I use "ActiveStink" to sync my files without problems.
Any advice will be more than welcome!!
I'm no expert but that appears to be normal behaviour!
ActiveSync is only used at the start of the process. After a few files have been transfered, Activesync is closed and a different link is established. If you just leave it for a short while longer, a progress bar should appear on the Hermes too.
Yes, ActiveSync will disconnect. The RUU takes over the connection. Have you let it sit - sometimes it takes a minute for the progress bar to move.
Have you consulted www.mrvanx.org for help on the flashing?
todd_jg said:
Yes, ActiveSync will disconnect. The RUU takes over the connection. Have you let it sit - sometimes it takes a minute for the progress bar to move.
Have you consulted www.mrvanx.org for help on the flashing?
Click to expand...
Click to collapse
I'm having the same problem - always have. The message tells me that I'm disconnected and that I should check my USB connect etc. I left that box up there for about 15 minutes. Now I've closed the box and have waited several minutes with no activity. This is pretty aggravating. Thanks for any help.
try turning off your antivirus aplication. thats work for me flashing my tytn to wm6.
I've done everything.... I guess
Hi...
Yes, I consulted the www.mrvanx.org, excellent tutorials.
I flashed without problem the radio and bootloader. The progress bar started to "progress" and everything was fine. The only problem I have is flashing the WM6.
I don't remember where, but I readed that flashing the bootloader "Hard SLP v7" causes my HTC not to accept any Oficial WM6 ROM. The article said that I only had the chance to flash a coocked or modified ROMs. Is this true?
If not... what else can it be? I also closed all my applicacations including the antivirus, goback, disabled the internet connection, the logictec mouse center, etc. and nothing, the same as Chicoh happens to me.
"Error 260: Connection... check the USB cable bla bla bla."
Should I restart in safe mode to do the flashing?
Should I try to install a modified ROM?
Have in mind I've tried three different official ROMs: WWE, Cingular and spanish.
Thanks to all the comunity!!!
Saludos desde México!!
Greetings -
I had a similar problem and couldn't get the thing get going. My solution was to load it from the SD card. This worked flawlessly.
liquidsilver said:
Greetings -
I had a similar problem and couldn't get the thing get going. My solution was to load it from the SD card. This worked flawlessly.
Click to expand...
Click to collapse
I'm trying that as we speak. I have a good feeling about this. I'm a little concerned that I didn't think of it though. Makes perfect sense - Skip the middle man.
UPDATE: Crap. No luck. Thanks all the same though. I'm not giving up.
What OS are you using, xp or vista? My vista 'top had the same problem wouldnt flash for the longest time and i had to use my xp.
However, it does work now. Not entirely sure why.
Now I had success!!!
Hello my friends.
It seems that the article I readed days ago detailing that after flashing the Hard SPL v7, I could only install a modified ROM, not an official one from HTC or Cingular.
I downloaded Black Satin and installed it without any troubles. The entire process lasted only 3 minutes!!!
I wanted to have an official ROM, don't ask me why, and never tried the "other" ROMs that are actually excellent!!! some apps that were on WM5 are not in WM6, which is kind of sad, but if there's something that I love of WM Smartphones is that I can download and install whatever I want or develop it if it doesn't exist!!!
By the way, I use Windows XP Pro.
Thanks for all the support!!!
PS: Before flashing the Hard SPL v7, I tried installing the cingular WM6, but didn't make it. That's why I readed almost all the pages and threads here in xda-developers and found that flashing a new bootloader was a very good idea. The rest of the story is known by you.
After many flashings of roms, I finally flashed back to the official AT&T WM6 rom located at the link below:
http://forum.xda-developers.com/showthread.php?t=334771
My phone, even with my new sim card doesn't pick up any reception at all. All I get is the two arrows with the "x" and that other weird symbol with the exclamation point next to it.
I have a tilt and when I pop my sim inside, it works perfectly, no hiccups what so ever.
I live here in Hawaii and we just recently turned on the 3G network and I'm not sure if it affects my 8525.
Any ideas on what may be wrong? I had used Black Majiks WM6 on my 8525 previously but this past Monday I had issues with it so I tried flashing a bunch of times and still no fix.
I've searched through the threads for the last 2 days and everything I've tried so far hasn't work and I'm really desperate and need input from more professional users. PLEASE!!!
More information regarding phone problem.
When I try hit the green phone button, it doesn't do anything. Also going to phone settings under the settings menu, and it doesn't go there! Don't know why, I try to click it and nothing. Other icons work, not that one though.
This is getting ever more frustrating and I'm still searching through the thread for possible solutions, but nothing. Someone out there has to have some clue as to what may be wrong!
Found out another thing that might be of importance.
When I reset my device, soft or just turning it off and on, I get a "No GSM" on the AT&T screen.
Man, I've even gone as far as visiting Mr. Vanx's site to downgrade everything back to WM5. I still get the "No GSM" on my startup screen and no connection!
WTF?????????????
Well if you can get to the boot loader try flashing the official rom from HTC's Site for your phone. I'm not saying the one you DLe'd from here was bad but maybe it's just not the right one for your phone for some reason.
http://www.america.htc.com/
Well not to say the ROM you DL'ed from here was bad or anything but if you can get to the bootloader flash the officially released ROM from http://www.america.htc.com/ for your phone and see if that fixes your problem. Maybe the ROM you got from here is just not the right one for your phone or something. Worh a try anyway as you can't really use it as is.
Scrambler001 said:
Well not to say the ROM you DL'ed from here was bad or anything but if you can get to the bootloader flash the officially released ROM from http://www.america.htc.com/ for your phone and see if that fixes your problem. Maybe the ROM you got from here is just not the right one for your phone or something. Worh a try anyway as you can't really use it as is.
Click to expand...
Click to collapse
You know, the weird thing is that I tried to download stuff from the American HTC site, and I can only max out at 10.0kbps and I can NEVER get the whole file, only 15% maybe.
Talk about running into one problem after the other.
Is there a mirror out there somewhere?
Xyberz
Check your PM's
Xyberz said:
You know, the weird thing is that I tried to download stuff from the American HTC site, and I can only max out at 10.0kbps and I can NEVER get the whole file, only 15% maybe.
Talk about running into one problem after the other.
Is there a mirror out there somewhere?
Click to expand...
Click to collapse
I agree, anyone have it I can download? I keep getting lockups on my 8525 with the Schapps build and I want to try the offical build to see if it's the device or the build........but it downloads SOOOO slow......
Just finnninshed uploading RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe the Official ATT/HTC America file to Media Share. Here is the link for you. Hope it helps, let me know.
http://www.mediafire.com/?e0wkzvgm6ym
or
http://www.mediafire.com/?sharekey=ab1a9d4d5155409591b20cc0d07ba4d2067ccab3e6e21d05
Ok thanks for the uploads. Got the file. I just want to make sure if I should upgrade to Hard-SPL V7 before I use the update the rom?
I went all the way back to Herm SPL 1.06 and Cingular WM5. Don't want to brick the phone so wanted confirmation before I do anything else. Can't afford for things to get more messed up.
Xyberz said:
Ok thanks for the uploads. Got the file. I just want to make sure if I should upgrade to Hard-SPL V7 before I use the update the rom?
I went all the way back to Herm SPL 1.06 and Cingular WM5. Don't want to brick the phone so wanted confirmation before I do anything else. Can't afford for things to get more messed up.
Click to expand...
Click to collapse
Well I like using Hard-SPL V7 especially for the cooked roms as it gives you a bit of safety, but the rom I uploaded here is the Official HTC America / ATT Rom so you can follow their flash instructions for it. I even successfully flashed this ROM from VISTA 64 bit with no problem to my Herm 100.
As with any Flashing their is always a risk if something should go wrong that you will have a brick but your already near that point as you can't do anything with the phone at this point anyway.
GL & let us know how you make out.
Hi guys, I've read and used the forum for years and upgraded my Cingular 8525 a ton without troubles (followed Vanx's method for vista and for upgrading), but this is the first time I'm really stuck without a clue.
I had Schaps latest OS on my phone working fine for about three days. It was charging with the USB hook up to my Computer. I pulled the USB out and the phone entered bootloader. I couldn't get it out. I tried using mtty to no avail, hard reset ect., but finally used the SD loading method to put TNT's latest on it (don't know why this worked). Here's the thing though, the phone will load fine on first load after I flash, but if I soft reset or turn the phone off and on it goes right into bootloader mode. The only way I can get it to load up again is to connect it to the computer's USB, take out the battery and then put it back in. the OS then boots up without fail.
I have read a ton and searched on the forum, and if any of you can help me understand what the hell I can do to fix my phone I would really appreciate it. I will post anymore info you guys would like, I really need your help on this one.
Thank you so much!
Hi,
I posted exactly the same problem today ! here:
http://forum.xda-developers.com/showthread.php?t=381284
It's really strange !
Dave
I've been reading everything and it appears that Schaps's new version seems to have this problem sometimes....I have the exact same problem as everyone else (mtty gives me the same results), and flashing a new rom doesn't get rid of it....I hope there is some way to fix this!
maybe I'll try flashing a new radio and see if that helps things....
I did notice that flashing Schaps 4.31 seems to include radio 1.50 and I had changed my anyway to 1.43 as I thought that was better for my area.
Not sure a radio will help. Maybe a different ROM version will ? Maybe 3.54 ?
I have flashed TNT's rom as well and it still has the problem now....I'm flashing a new radio as I type, I'm going to have to reflash the OS too, it just got stuck again as it was restarting.
Just a quick thing, I think I have solved my problem (not sure if it is permanent) by powering the phone off and on. Not resetting, just a simple power off. I spoke to a colleague who said the way it shuts down is different to soft reset (makes sense) and I haven't powered my phone off properly for a long time.
I have tried soft reset a couple of times since doing this and it hasn't gone to the bootloader screen once.
Maybe this is the simple fix.
I will keep you posted.
try to flash OFFICIAL ROM first , maybe there are few bug / missing file when error appear while flashing other ROM.
I hope it will help you both.
rgds,
ermen
Use mtty to see if yo have any bad blocks... I've had a few problems the same as yours and found I had 1 or 2 extra bad blocks, after the 2 "factory standard" bad blocks I got on my jasjam of course. hope this helps...
My fix didn't work.
Not sure what I am suppossed to see when I run "task 2a".
Has anyone had any luck fixing this ?
Hello everyone, I am really new to this forum having received the Dash 2 days ago. Looking to get it up to speed I flashed the 6.5 Energy Rom according to instructions. I think that was a very bad move, because now the cellphone is stuck on the Loading Energy Rom screen. I have searched the forum for answer and have already tried the following:
1- Entering bootloader and flashing original ROM. No luck because EVERY rom I have gotten, be it from here and T-Mobile, it says invalid vendor ID.
2-Tried to perform a hard reset. Did not work.
3-Flash the original ROM through the memory card. No avail.
The phone cannot connect to active sync, so I can't install any cooked ROMS. I think the solution is installing the original ROM by the bootloader, but I cant seem to find a compatible one. My cell information is the following:
Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU
EXCA 100 S/N SZ713FE05873.
Is there any way with that information someone can tell me which ROM to use? Or any other tip/hint/suggestion? Any help will be greatly appreciated!
I have the same Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU value and i was able to restore my phone to working status with the following ROM
http://www.megaupload.com/?d=IJIVTIMF
Hope this help
10507
Thank you very much 10507! I'll download it now and see if it works.
Thanks for the file but it appears that it is for the SDA. It dit not work
luisro said:
Thanks for the file but it appears that it is for the SDA. It dit not work
Click to expand...
Click to collapse
That's odd, I was able to restore my Excalibur/Dash after flashing the corrupted EnergyRom.
Hope you will find a way to resolve your problem.
10507
But how did you do it? Flashing it through USB or through the memory card? The weird thing is that when I run the EXE the cellphone that appears in the picture of the program is an SDA. But well I will try it again and thank you for the help!
I used bootloader method and connected my phone through USB for flashing. Remember to remove your memory card when flashing.
well, I've been in your situation for almost 3 days now, and still no solution for it, maybe it's time to put it in the box and purchase a new one , all thanks to the broken EnergyROM ...
Ok guys. Don't give up. Believe it or not, a Dash is NOT easy to brick like some other devices. the steps are fairly clear but let me refresh:
- Go into bootloader by holding the camera button and powering on the phone
- Connect the USB cable, you will hear the ba-bing USB connect sound on your PC (if u don't thats why you're having issues flashing)
- Download and unpack a "factory sealed" signed ROM. I use this one: http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
- With USB connected and the phone in the multicolor bootloader, run RomUpdateUtility.exe, check the boxes, it next, bla bla bla.
- It will look for your device for 20 seconds. then hit "update" and next.
- It should then start flashing the Excalibur Brightpoint Factory ROM back onto your phone
- If you can't get this far or it fails, try a different PC or Flash from the SDcard
** NOTE: If flashing from USB, REMOVE the SD CARD! This is the biggest mistake of most people trying to flash from USB.
Good luck.
ookba said:
Ok guys. Don't give up. Believe it or not, a Dash is NOT easy to brick like some other devices. the steps are fairly clear but let me refresh:
- Go into bootloader by holding the camera button and powering on the phone
- Connect the USB cable, you will hear the ba-bing USB connect sound on your PC (if u don't thats why you're having issues flashing)
- Download and unpack a "factory sealed" signed ROM. I use this one: http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
- With USB connected and the phone in the multicolor bootloader, run RomUpdateUtility.exe, check the boxes, it next, bla bla bla.
- It will look for your device for 20 seconds. then hit "update" and next.
- It should then start flashing the Excalibur Brightpoint Factory ROM back onto your phone
- If you can't get this far or it fails, try a different PC or Flash from the SDcard
** NOTE: If flashing from USB, REMOVE the SD CARD! This is the biggest mistake of most people trying to flash from USB.
Good luck.
Click to expand...
Click to collapse
Thanks ookba for cheering us up. I'm having the same problem like many, many people in this forum hopeless seeing our dash not responding to every solution proposed in this forum and the only thing that we have right now is keep trying to flash and see if it works. I will try again in different PC and see what happens. I'll let all of you know if I finally resurrect my s621.
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
luisro said:
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
Click to expand...
Click to collapse
This problem is ridiculously weird to why some members are able to restore their phone to original factory condition, and others are not able. Therefore, I have search from trustworthy sites and from friends for difference made ROM. Hopefully, one of these ROMs with help out anyone...........
1.33.422.1 (Worldwide English, WM6)
http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
1.27.405.1 (Worldwide English, WM6)
http://rapidshare.com/files/100235639/HTC_S620_WWE_1.27.405.1.exe
1.22.531.6 (T-Mobile USA, WM6)
http://www.mediafire.com/download.php?z4vjgzxisrz
1.22.531.4 (T-Mobile USA, WM6)
http://www.mediafire.com/download.php?yygkw1d5xmc
1.11.531.1 (T-Mobile USA, WM5)
http://rapidshare.com/files/104641948/T-Mobile_DASH_WM5_V_1.11.531.1.exe.html
Excalibur_BRIGHTSTAR_PTB_1.30.514.2_4.1.13.47_ 02.98.90_Ship
http://www.mediafire.com/?9gbwdzd2omg
Thanks 105507 but no success at all, I even found 2 more factory roms in the web and also they don't work. I own an unbranded international version s621 manufactured by Brightstar corporation (I tried to flash Brightstar's stock rom but it didn't work) and I noticed this because in the warranty docs it says brigthstar corporation and originally the phone came with WM5.
not that this will help. but this is one of the reasons why people should be really installing the hardspl so if you have a bad flash, you dont have to install a stock rom. any rom whether be it cooked or not will work. but this hardspl must be done prior to installing ANY rom. the hard spl is done by jockyw2001. send him a pm to see if theres anyway to get that on the phone, even in its current state.
edit: here's the link to the hardspl: http://forum.xda-developers.com/showthread.php?t=329605
luisro said:
Hello everyone, I am really new to this forum having received the Dash 2 days ago. Looking to get it up to speed I flashed the 6.5 Energy Rom according to instructions. I think that was a very bad move, because now the cellphone is stuck on the Loading Energy Rom screen. I have searched the forum for answer and have already tried the following:
1- Entering bootloader and flashing original ROM. No luck because EVERY rom I have gotten, be it from here and T-Mobile, it says invalid vendor ID.
2-Tried to perform a hard reset. Did not work.
3-Flash the original ROM through the memory card. No avail.
The phone cannot connect to active sync, so I can't install any cooked ROMS. I think the solution is installing the original ROM by the bootloader, but I cant seem to find a compatible one. My cell information is the following:
Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU
EXCA 100 S/N SZ713FE05873.
Is there any way with that information someone can tell me which ROM to use? Or any other tip/hint/suggestion? Any help will be greatly appreciated!
Click to expand...
Click to collapse
My phone is the same your phone but ONBL 1.33.0000 and SPL 1.33.0000
I'm trying to find the original rom of this line but not found. Please help me!
Have you done a reset? My friend fixed his by trying reset a few times. He reset it, walked away...., it took long time to see whether it booted over; if not, do it again...
By the way, he leave the sim card in; and, you need to remove your micro sd card.
On an official site it is possible download ROM for your phone. It is flashing from bootloder mode. It some times helped me, while I have not flashed hard SPL.
luisro said:
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
Click to expand...
Click to collapse
Hi my friend, I wish you lucky!!!
by the way, where country you're from, I have some Shipped Roms here for brazilian Excalibur (S621), maybe it could help, if the answer is yes, let me know to made this one come to you
http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
Furious Girlfriend (oh My beloved Helloween died with my ROM's)
Boy oh Boy...
My ROM's are now in heaven
Girlfriend deleted they (I'm so sorry...)
But, pay attention in this thread
http://forum.xda-developers.com/showthread.php?t=381726
In there have a sort of shipped ROM's and maybe coud help you
Good luck my friends
A friend from XDA have some Shipped Rom's and will upload it for you, shortly he'll post something here