Hi,
Can anyone help me. My artemis was working fine till some days ago. What is appening is that the phone just shut down with no reason, and hang ups. I have to press the reset boton fo restart. I have already hard reseet it, and reinstall the original room.
What can i do to it, without it im with the hammer
Related
Hello all
My artemis won't turn on anymore. I managed to do an hard reset but when it got to resetting the device, it will not start again. Tried removing the battery for some time, but no results.
Only thing I'm able to do is start the bootloader and use mtty. Is there something I can do from there ?
Regards
Hello,
I had the same problem, ended up with service - took 3 weeks (Norway). In the beginning it happen once or twice a day, managed to turn it on but after a few weeks it didnt start at all.
Best regards
BA
I had the same problem today on my Orbit. I started the GPS (igo 2006) this morning, and it started calculating a route from my present location to somewhere really far (forgot to reset the route). It became unresponsive, so i decided to soft-reset.
However, it wouldn't turn on... I removed the battery, sim, and microsd card for an hour, and tried to start, but no luck. Soft-reseting didn't do anything either. When I got home, I plugged it in to charge, but no go... the charging light stayed off, and a soft-reset wouldn't work.. wouldn't even power on!
Finally, I pressed the voice tag button (top left button on the side, beside the volume slider), and the soft-reset button togther for a couple of seconds... and it booted up like normal.
Not sure if this is a permanent solution, but I'm going to back-up everything daily from now.
Try it... might work for you.
N.
The bluetooth on my hermes suddenly stopped working. In the COMM manager its X'd out and when i press it nothing happens. Stays off.. any ideas?
Any stacks i can flash or things i should try before calling warranty return?
I dont feel like calling ATT... this is my 4th hermes in 3 months. And they all had problems.
Pop the battery out and leave it out about 1 minute. Pop it back and once you are fully booted, turn it on again. This has happened to mine 3 times so far and only started doing it about 2 months ago (had the phone a year so far).
I have no idea why it happens, but that's how I have to fix it.
euth said:
Pop the battery out and leave it out about 1 minute. Pop it back and once you are fully booted, turn it on again. This has happened to mine 3 times so far and only started doing it about 2 months ago (had the phone a year so far).
I have no idea why it happens, but that's how I have to fix it.
Click to expand...
Click to collapse
Yeah.. well i've already hard reset the phone and the problem is still there.. I might try a wm5 rom a little later on. Any other ideas?
Which rom version are you using? With 3.60, the following happens:
After a reset (soft or hard) you can turn on and off bluetooth using comm manager. After a moment (quickly...) when turned off you cannot turn it on again. It stays"crossed". The only way to start it again is to soft reset. The solution? Let it "on" all the time. (I did not notice this problem with 3.57 roms)
Bergerac56 is right.
But you could make turn it off after the device starts up (and it is already on)
just make sure its on again when you hard reset
hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.
no one seen this then I guess.
Bummer (for me!)
Try hard reset
sickboy555 said:
hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.
Click to expand...
Click to collapse
Try hard reset
softreset helps, sometimes i have the problem with windows mobile 5 too
jmermel said:
Try hard reset
Click to expand...
Click to collapse
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.
Hard reset
sickboy555 said:
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.
Click to expand...
Click to collapse
You might have loaded a program that is not liked. Use a backup program. If this does not work then load your backup after the hard reset and you will be back to where you started
P3600 with D810 WM6 ROM; also happens occasionally, recovered with soft reset. Seems to happen most often when I press the On/Off button twice too quickly.
thanks guys.
I'm going to try the hard reset route-I'll report back.
Some time ago this happened to me so often, but said it was due to some application, in my case was Slide2Unlock.
Since I removed by their consumption of memory it didn't happened to me.
(Sorry for my english)
Bugger, this has started to happen to me as well. Only 3 times in the last 3 days but if it keeps is up that will be enough for me to do a hard reset (overdue). Strange cause the only new thing I put on in the last week has been PCM 16 which is only a copy/paste exercise.
The fix in the Hermes forum is to force your device to sleep and not let it go into standby.
I have had some problems recently with DeviceLock 1.2 just ceasing to work and have to uninstall/reinstall to make it work again. I set it to turn the screen off when locked, as this does not put the device on standby, maybe there is the same issue with it going into standby by itself.
I have the same problem..i think that it has to do with the phone hanging..most probably due to some background programs eating too much power and memory and the phone just lacks till it hangs..happens when you have other programs that have hanged as well..my problem is with PocketAlarm..it takes so long to load my phone went to standby and the phone couldnt be called back..in brief the phone just hangs because of a program..i don think it has any problem do to with the hardware or strictly the OS..cant really explain..but the role the OS play in this problem is that it allows the program to make full use of the phone till the phone cant cope with it..its the core of the OS so it cant be avoided with any other versions or anything..sorry it seems rather unclear..hope you guys understand..
same problem for me ... from times to times, when a call hang up, i push a lot of times the red button for going back to the today screen and as it shows up, i click immediately on the Power button for turning off the screen. right after when i forgot to do something (approx 1sec) i push the power button and there it doesn't turn on the screen ... strange ...
what i've installed on it :
TomTom 6
BatteryStatus with today plugin ver 1.04.203 beta4 i put tray icons too.
i've bluezard for sniffing and/or hacking bluetooth devices.
OBDgauge too it's a software that works with a bluetooth dongle i plug into the diag port of my car.
and that's all. ah yes one more thing -> i disable the "HTC Home" because i don't like it.
Same problem here...
Still no solution?
I got this problem from some version of rom by Karmba. But V7.2 is OK so far. It seems happened when I close Egress reader by click X button then turn off screen by power switch. It then would not wakeup again. But if I close Egress and check the running programs from Task Manager to make sure the Egress is not running at the background, then I can turn on or off the screen freely.
So I think this wakeup problem is caused by some running program that was not closed properly by X button then crash the WM.
That was just my personal finding. Hope it help you guys a bit.
Hi,
first this is a great forum even the roms are great.
I am coming to you with a big Problem and i don´t know what to do anymore.
As me was given back my ipaq it was completly empty. When i put it on the cradle it began to start. After 2 seconds booting the orange light flashed one time (sign for loading) and after this the screens shuts off and the hp loo is like burned into the screen.
I had this before when i had an error bei updating my rom.
So i thought to hard reset or clean reset or to put it into preboot mode to update the rom. But nothing works. He is not taking any kind of reset.
So i thought i have to charge the battery. But didn´t help it even did´t get warm after one night charging. But when i am trying a reset, after some tries puting it on the cradle back, he tries to boot but the same happens. I have win 6.0 installed.
Does anybody has an idea? I need it on Friday for my holidays, if not i don´t have any navigation system and i am traveling by caravan over 5000km, it would be hard without.
I am counting on you guys, thnx a lot for helping
As far as I know - there is nothing You can do.
There is a problem with motherboard. And it seems that this problem appears just after a drop. Some inner component become loose.
I do have a one hx2490b motherboard with the same problem - it starts to load and then turns itself off. Trying to do a reset does not work as well there is no bootloader.
Today I realised that the screen of my phone is vibrating this was the first time. I tried to hard reset it but all the time i do it, it is the same problem. Otherwise the network is not working and when i try to do something else the hole screen become white and i can not restart it only if i take the battery out than i replace it. Yestarday it has no problem. I have almost tried everything but nothing worked. Please help! I would like to use my phone but i can't.