Related
last Rom: 3.07 with last OS 5.2.19209 build 19209 aku 1.0.2
a BIG thanks to: bepe: for all!!!...
and...
cmonex: for guide about have no more signed file check (you can cange system files into \windows on the fly in your ppc!!!)
and...
ausdin: for xip part to solve mail iusses (only for some devices...)
and...
eliasweb: for fixes like: autohibernate, processkiller, actsynckiller and other...
and...
adewidt: for dll replacing to solve A2DP iusses caused by previous xip part replacement...
what inside:
some screenshots...
download here:
http://rapidshare.com/files/105803486/ervius_3_07_WM6_1_ITA_essential__build_19209_.zip
if you want is better first of all (but not necessary!) install DES Hard SPL:
http://rapidshare.com/files/97120933/DES_Hard-SPL.TRIN_2.zip
SERIAL NEED???
here the licenser, so you can use it like you want and disable the nag screen...
(you have to install this cab on the Device and execute it... )
http://rapidshare.com/files/102451818/Rom_Licenser.cab
P.S.:
for Hard spl, sip selector and sdconfig tool here:
http://forum.xda-developers.com/showthread.php?t=379704
bye!
Great ervius!
I'm waiting for the link...
Thanks again and again and again...
Bye
ivansc said:
Great ervius!
I'm waiting for the link...
Thanks again and again and again...
Bye
Click to expand...
Click to collapse
1 second of bad connectivity, costs another half an hour to upload it....
damn....
Great Ervius
In the screenshot the build is 19202 and not 19209...
tank's ervius .... without the cube it could be great
zooster said:
In the screenshot the build is 19202 and not 19209...
Click to expand...
Click to collapse
yes, I used the previous, but is 19209, shure....
great work ervius!!!
tnx
marcosorano said:
tank's ervius .... without the cube it could be great
Click to expand...
Click to collapse
the cube is sleeping into it....
if you don't enable, it doesn't works, and can delete also lnk into "esecuzione automatica" folder...
I tell you witch .lnk files have to delete, then!
ADDED Download link!!
bye!
yas but it take 10 mb of memory
Ervius,
it's time to make it clear: why don't you just remove all the previous versions and say "ok, flash this one", there are too many ROMs by you around, it's very difficult to choose between all of them
ervius...thanks for all!!! you are great and your work is OUTSTANDING!!!
only a little help for your future works...why don't you try to open a single post of new relases where you put the link of various version (essential plus, essential minus, etc.etc)?
in this way...i think your works would be more appreciated due to more visibility of thread!!
and last but not least...can u try to relase this ROM version with essential minus as previous one???
thanks again
3.07
on htc home it doesn't show the music player tab
Great Ervius, you are number one!! I test it immediatly...
marcosorano said:
on htc home it doesn't show the music player tab
Click to expand...
Click to collapse
the version 2.1 don't have it.
vysus said:
Ervius,
it's time to make it clear: why don't you just remove all the previous versions and say "ok, flash this one", there are too many ROMs by you around, it's very difficult to choose between all of them
Click to expand...
Click to collapse
I think if you read the 1st post of any 3d, you understand what kind of rom you want or need.
marcosorano said:
yas but it take 10 mb of memory
Click to expand...
Click to collapse
if you want you can remove it from rom....
open a frouchflo.cab that have all inside (or see the ones present in my 19202 kitchen)
dump the rom, delete all files, delete all occurrences into initflashfiles.dat
and rebuild rom without it.
this could be a good solution.
ervius said:
if you want you can remove it from rom....
open a frouchflo.cab that have all inside (or see the ones present in my 19202 kitchen)
dump the rom, delete all files, delete all occurrences into initflashfiles.dat
and rebuild rom without it.
this could be a good solution.
Click to expand...
Click to collapse
::k not possible for me to do that... one more question, in htc home
doesn't appear music player tab what can i do for that without dump and recompile your fantastic rom?
marcosorano said:
::k not possible for me to do that... one more question, in htc home
doesn't appear music player tab what can i do for that without dump and recompile your fantastic rom?
Click to expand...
Click to collapse
I don't know, maybe an unknonw (for me) registry trick, I analyzed more that one time the registry entries, and all seems to be ok, but cannot show it, for now.
Hi,
I would like to share the kitchen that I use to build my personal ROM. It's SYS and XIP were ported from the stock Diamond 1.93.456.2 WWE ROM that Tom made available and the kitchen is Bepe's kitchen.
Here it is (Build 19965.1.2.3):
http://rapidshare.com/files/130210385/Artemis_Diamondish_6.1_Build_19965.1.2.3.zip
UPDATE1: I have made a few changes in the OEM folder, I have added Advanced Config, added a patched htc home for the weather and made some changes to the registry. The changed files are in the attached zip.
Pre-Built ROM (NBH) can be downloaded from here:
http://rapidshare.com/files/130466202/Artemis_Diamondish_6.1_Build_19965.1.2.3_NBH_ROM.zip
(Usual rules for cooked roms, i.e. USPL etc.. - http://forum.xda-developers.com/showthread.php?t=331845)
UPDATE2: I have uppdated the XIP and SYS to use build 20273.1.3.3 and use .NET CF 3.5 as suggested, thanks xvx45
Pre-Built ROM (NBH) can be downloaded from here:
http://rapidshare.com/files/133908594/Artemis_Diamondish_6.1_Build_20273.1.3.3_NBH_ROM.zip
Kitchen:
http://rapidshare.com/files/133917390/Artemis_Diamondish_6.1_Build_20273.1.3.3.zip
UPDATE3: I have uppdated the XIP and SYS to use build 20721.1.4.0
Pre-Built ROM (NBH) can be downloaded from here:
http://rapidshare.com/files/142121757/Artemis_Diamondish_6.1_Build_20721.1.4.0_NBH_ROM.zip
Kitchen:
http://rapidshare.com/files/142132785/Artemis_Diamondish_6.1_Build_20721.1.4.0.zip
Fix for the SMS inbox issue can be found in post #99 http://forum.xda-developers.com/showpost.php?p=2616507&postcount=99
Here are some screen shots (of build 19965, mainly the same as build 20273 and 20721 but version numbers changed):
Nice work bro, nice to see new "faces" on Artemis forum.
Cheers.
Thanks, been here a while, just learning as I go. I thought it was a bit quiet on the new ROM front.
Thank you very much for you sharing!
Maybe this was the push i needed to start also cooking.
Who knows...
Cheers
Thanks for share man!
Do you have some screenshots of this ROM?
INFO
Hi,
Just extracted, saw all the separate files, did i miss the full .nb rom image or is this post to cook yourself with the htc romtool?
I know there are a look of cooking-guides, but can anyone explain simple which files tot select from the extraction when running the htc rom tool you have to fill in :
G3 IPL
G4 IPL
SPL
Splash
Radio Ext.Rom
OS
Can i add also .cab files for example somewhere to add to this rom?
Would like to cook first rom.
Thanks,
Innovator
Hi, just run the batch file "BuildNB.bat" and that will generate the .nb and .nbh files, they were removed to reduce the size of the archive.
You may also need to install the VC8 Runtime first, that can be found in the archive:
"tools\vcredist_x86.exe"
There is a tool from Ervius (I think that it is called "packages creator") that will convert cabs to OEMs suitable for cooking with.
Thank you mate, I'll try to make it compatible with Orange France SPV M650 AGPS
Maybe my starting element to come with Artemis community more often (actually my phone but Icook on my old Prophet at this time).
Good job
Hey guys,
This seems promising. I've just installed Tom's latest but have been troubled by bugs (it happens) since he's no longer responding to queries I decided I needed to learn to cook one myself (should be fairly straightforward).
Perhaps we should pool experience & resources and work together, I mean if you look at the activity in the Kaiser forum, you'd be forgiven for feeling a bit left out.
One person could design gfx the other sounds etc. Otherwise I might swap my Artemis for a Kaiser (yes I've been begged!!)
Forgive me if this seems like a pipe dream...
More screen shots....
Here are some more screen shots:
daniel.bigred said:
Hey guys,
This seems promising. I've just installed Tom's latest but have been troubled by bugs (it happens) since he's no longer responding to queries I decided I needed to learn to cook one myself (should be fairly straightforward).
Perhaps we should pool experience & resources and work together, I mean if you look at the activity in the Kaiser forum, you'd be forgiven for feeling a bit left out.
One person could design gfx the other sounds etc. Otherwise I might swap my Artemis for a Kaiser (yes I've been begged!!)
Forgive me if this seems like a pipe dream...
Click to expand...
Click to collapse
I agree, it would be nice to have an "open" ROM that the community contributes to, I hope that this would keep the Artemis platform alive for future releases of Windows Mobile.
P3350
Hi all... i am very new to cooking and still thinking of getting my feet wet... have a couple of questions...
1. I have a P3350 (Artemis with out GPS) and when i install all these roms they are sluggish when compared to P3300s. My friend has a P3300 and the same ROM is fater ... I tested it immediately after flashing by opening the windows folder and other apps... should i be doing any thing different to get my device up to speed?
2. The ROM on the rapid share (http://rapidshare.com/files/13046620....3_NBH_ROM.zip) is this a directly installable ROM?
3. What should i be doing with the 'changed files'.
Sorry if i am sounding noob...
veereshpm said:
1. I have a P3350 (Artemis with out GPS) and when i install all these roms they are sluggish when compared to P3300s. My friend has a P3300 and the same ROM is fater ... I tested it immediately after flashing by opening the windows folder and other apps... should i be doing any thing different to get my device up to speed?
Click to expand...
Click to collapse
I don't know of any, but I am looking into a similar issue that I see with my orbit, I think that I am going to look at the XIP region of the ROM to see if there is something device specific there, sorry for not being much help.
veereshpm said:
2. The ROM on the rapid share (http://rapidshare.com/files/13046620....3_NBH_ROM.zip) is this a directly installable ROM?
Click to expand...
Click to collapse
Yes, this contains everything but assumes that your device is already running the SPL and only contains the OS portion and not the radio. Look at the link in the first post for help on flashing cooked roms.
veereshpm said:
3. What should i be doing with the 'changed files'.
Click to expand...
Click to collapse
These files in the zip should replace the existing ones in the kitchen on rapidsahre.
veereshpm said:
Sorry if i am sounding noob...
Click to expand...
Click to collapse
No problem, we were all like that, I am still learning as I go.
please inform - this pre-built rom, what is it contains of?
set of programms, etc...
And what about memory leaks?
Thank you
Freshup Roms...
Good try for this new rom, but i find the home-skin not stylish enough (dated too soon).
Why not create a rom with Greatball's today screen, see http://forum.xda-developers.com/showthread.php?t=402021
This is the most stylish skin (with SPBMobile 2.1) i have ever seen (last one with analog clock).
Together with Greatball's Samurai Diamond Weather + Night
http://forum.xda-developers.com/showthread.php?t=402124
Would be the most fresh looking rom ever
In combination with latest msn, SPB-backup,PPCBackupcontacts,...
Who can do this & freshup our Artemis for a long time ?
Thanks,
Cheers!
Innovator
mpattman said:
Hi,
I would like to share the kitchen that I use to build my personal ROM. It's SYS and XIP were ported from the stock Diamond 1.93.456.2 WWE ROM that Tom made available and the kitchen is Bepe's kitchen.
Here it is:
http://rapidshare.com/files/130210385/Artemis_Diamondish_6.1_Build_19965.1.2.3.zip
I hope that it will be useful to some of you.
Matt.
UPDATE: I have made a few changes in the OEM folder, I have added Advanced Config, added a patched htc home for the weather and made some changes to the registry. The changed files are in the attached zip.
Pre-Built ROM (NBH) can be downloaded from here:
http://rapidshare.com/files/130466202/Artemis_Diamondish_6.1_Build_19965.1.2.3_NBH_ROM.zip
(Usual rules for cooked roms, i.e. USPL etc.. - http://forum.xda-developers.com/showthread.php?t=331845)
Here are some screen shots:
Click to expand...
Click to collapse
When an Italian version?
I have no plans to produce any other languages, but the source to the kitchen is all there for someone to translate to suit thier needs.
Ok, I've tested and make my first Artemis ROM (for test use for the moment).
I've been implemented Orange AGPS drivers but no luck no automatic connexion at the moment when GPS is activated so, I'll make more try. So I've removed some components (Adobe flash & reader, Diamond Keyboard and some little thing) that I don't want and this ROM is stable and fast...very fast coocked with NETCF3.5 Now I'll translate it to French if I've time to that more than my future release
Just one thing mpattman : why to release this kitchen with NETCF 2.0 and not directly 3.5 ?
And the last Word : Thank you mpattman !!!
I can not down your ROM and MYkitchen,please get it to FTP,thank you.
Thanks a ton...
Thanks MPattMan...
I am downloading the kitchen, and will try understanding stuff... will post if i have any doubts... do u have any guide on how to do stuff like adding the programs that i want ? ... i will be more than willing to help, test and learn.
being tired of seeing too many protected roms floating around, i decided to make japanese wm6.1 cooking base files myself. it took me awhile, but i finally figured it out. i would like to share my experience of making a japanese wm6.1 rom for hermes here.
actually, it is not that difficult, and all i did was just assembling pieces from different official roms. so, i would NEVER call it my OWN rom or anything because every part of the original roms was developed by MS and HTC. (sorry, but i really think it's too funny many people, who know slightly better than others, put their names in the ver info, apply procection or whatever to their roms, and say "this is my own rom!" for something made out of other roms originally built by MS and HTC.... is this place for dev info sharing for similar-minded guys? donations?? c'mon!)
i will explain about the details step by step later. here's a rough tutorial.
things you need:
[tools]
Pandora Kitchen (thanks to mattk_r) for cooking and burning
http://forum.xda-developers.com/showpost.php?p=1364931&postcount=1
or
i prefer bepe's Extended Hermes Kitchen for WM6.1
http://rapidshare.com/files/88850555/HERMES_DEV_v2.1_Build_19199.rar
G'Reloc.exe as usual
http://forum.xda-developers.com/showpost.php?p=1524413&postcount=1
[roms]
bepe's kitchen (thanks to him!) for simple and working oem folder and xip (OEMXIPKernel only)
http://forum.xda-developers.com/showpost.php?p=1177762&postcount=1
x04ht (japanese softbank diamond) rom for most of the sys part
http://forum.xda-developers.com/showpost.php?p=2998164&postcount=1
htc hermes official wm6.0 rom simply for os.nb as a template
http://rapidshare.com/files/46467733/HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe
htc kaiser (or opal) official wm6.1 rom for dpi_96 files
http://rapidshare.com/files/157469239/Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.rar
http://forum.xda-developers.com/showthread.php?t=441689
s11ht (japanese emobile kaiser) official rom for 0411_dpi_96
ftp://htc-jp.com/EM/S11HT_firm_V2_6_881_0_JPN.exe
[basic strategy]
[oem]
1) bepe's oem folder is very simple and clean for cooking (some modifications are necessary in *.rgu files, tho)
2) replace OEM.cer by the one from x04ht rom
[rom]
1) basically, you can take OEMXIPKernel from bepe's xip or from htc hermes official wm6.0 rom
2) MSXIPKernel and MSXIPKernelLTK are from x04ht rom or whatever you want
3) use os.nb from htc hermes official wm6.0 rom just as a template
[sys] (tricky)
1) the base is opal sys. but remove all the language specific (0409) folders.
2) take the language specific but non-vga folders from x04ht, x05ht or whatever wm6.1 japanese rom (0411 folders not including dpi_192)
3) take language specific qvga folders (the 0411_DPI_96 folders) from s11ht
4) take .vm folder, packages.* in metadata folder, and service.exe in os folder, shell32.exe and shellres.dll in shell folder from hermes official or bepe's sys. (irda is not included in opal rom. take them from bepe's rom if you wanna use irda.)
[points]
1) don't forget to copy WinCENLS_Lang_0411 into your sys. otherwise, the device does not boot since WinCENLS_Lang_0411 is not included in xip.
2) if you take sys from any newer versions, taskmgr does not work since it is not signed by softbank. remove mxipupdate_taskmgr_shell_1.provxml in base_lang_0411. it's useless, anyway.
3) this method does not create shotcuts in windows\appbuttons. you need create those shortcuts with japanese names yourself to make the buttons work properly. (does anyone know how these shortcuts are automatically created?)
4) os ver info is stored in the original files. (read here for details: http://forum.xda-developers.com/showpost.php?p=1172925&postcount=1) you can change the ver info as you want, but i REALLY hate to see ver info with someone's name or some personally customized splash screeens. so, the ver info does not reflect the actual ver you take all the files from.
5) i don't think this works only with hermes but with any other qvga devices (you have to change xip part.) hope many other qvga device users can make (assemple?) their own japanese wm6.1 roms freely.
question:
i made a shortcut file with 14 japanese (2 byte) letters and put it in the windows directory, but the hermes did not boot. i changed the name to 13 japanese letters, and then it booted... are there any filename restrictions for east asian language files??
reserved for step-by-step guide
here is the japanese wm6.1 cooking base files for hermes
sys: 21014
xip: 21014
oem: basically based on htc oem
http://www.mediafire.com/?3almqggzvgy (OS.NB.payload is not included. place one in rom folder.)
sys: 20931
xip: 20931
oem: basically based on bepe's oem
others: commmanager and calc replaced for the touch looks
note: i did not modified the ver info in shellres.dll.0411.mui, and the ver info shown in control panel does not reflect the real os ver.
note2: this file is just for cookers. i will not provide the rom tuned up for my own use. i will not response to "please send me your rom" requests. (sorry)
link
http://www.mediafire.com/?2gfymtframj
you can use these files FREELY since i simply assembled them from the other roms. they don't belong to be from the beginning. (.VM is not included. take it from another hermes rom to cook it!!)
happy new year, and happy cooking!
Congrats and welcome to hermes cooking sir. if you need a copy of a unprotected rom of mine, just let me know, PM or post
Peace sir,
Joshua
Very big thank for you...
qtotter said:
sys: 20931
xip: 20931
oem: basically based on bepe's oem
others: commmanager and calc replaced for the touch looks
note: i did not modified the ver info in shellres.dll.0411.mui, and the ver info shown in control panel does not reflect the real os ver.
note2: this file is just for cookers. i will not provide the rom tuned up for my own use. i will not response to "please send me your rom" requests. (sorry)
link
http://www.mediafire.com/?2gfymtframj
you can use these files FREELY since i simply assembled them from the other roms. they don't belong to be from the beginning.
happy new year, and happy cooking!
Click to expand...
Click to collapse
I'm Andy. Thank you very much, qtotter-san.
Lately I've been thinkin about changing my handheld (I'm using BA and MPx200 at this moment). But, despite my condition as a Japanese language student, I would love to have a Handheld powered by Japanese Windows OS. To buy Japan's handheld seems to expensive for me, so I decided to search for Japanese ROM first, then decide which one shall I buy.
I've been searching all the time for Japanese ROM (not 日本語化 ROM but 日本語版 ROM FILES), n finally, look what I found here, not only Japanese ROM, but Hermes WM6.1 Japanese cooking base (very big thanks ^o^). I've tried to search in xda-developers, and some other forum, but still unable to find Japanese ROM. I'd also sent private messages to Japanese developers here, but still I have no idea where to find Japanese ROM.
And now, I found this thread. This really helps me.
心から感謝を申し上げます。(kokoro kara kansha wo moushiagemasu)
Once again thank You very much, qtotter-san. I really appreciate your hardwork.
qtotter said:
sys: 20931
xip: 20931
oem: basically based on bepe's oem
others: commmanager and calc replaced for the touch looks
note: i did not modified the ver info in shellres.dll.0411.mui, and the ver info shown in control panel does not reflect the real os ver.
note2: this file is just for cookers. i will not provide the rom tuned up for my own use. i will not response to "please send me your rom" requests. (sorry)
link
http://rapidshare.com/files/178421014/hermes_jpn_wm6.1_cooking_base.zip.html
you can use these files FREELY since i simply assembled them from the other roms. they don't belong to be from the beginning.
happy new year, and happy cooking!
Click to expand...
Click to collapse
can't download not....can you release again? I want to cook JP 6.1 too...thanks a lot!!
could anyone tell me how to build OEM MMSLite?
antony34 said:
can't download not....can you release again? I want to cook JP 6.1 too...thanks a lot!!
Click to expand...
Click to collapse
it seems like it's been downloaded 10 times, already... the link has been updated.
qt
qtotter said:
it seems like it's been downloaded 10 times, already... the link has been updated.
qt
Click to expand...
Click to collapse
Thanks a lot!!!
I hope the explanation of WM6.5,please!
Opal/Diamond Dialpad
if you use opal dialpad with japanese wm6.1 rom, smart dialing stops working. i happened to find a solution while playing with my diamond. just delete the following reg key to make smart dialing work.
[HKEY_LOCAL_MACHINE\Security\Phone\PhoneKeyMatch]
"SmartFilterFlags"=dword:00000002
This entry is in the *.rgu of Base_Lang_0411.
Download won't start
Is anything wrong with the server?
Woops!
Problem solved by deleting temporary internet files
updated japanese wm6.1 base to 21014
i will update msg #3 shortly.
Thanks qtotter sann!
but BT seem have problem, once flash it. it show have not BT device...
antony34 said:
Thanks qtotter sann!
but BT seem have problem, once flash it. it show have not BT device...
Click to expand...
Click to collapse
no bt applications are included. (drivers are included.) please use any bt apps from your favorite roms.
qtotter said:
no bt applications are included. (drivers are included.) please use any bt apps from your favorite roms.
Click to expand...
Click to collapse
But I can't avaliable BT at comm manager...
antony34 said:
But I can't avaliable BT at comm manager...
Click to expand...
Click to collapse
confirmed. i will check what causes this later.
May I ask some one to upload a COOKED Japanese rom?
I am far from to play with Hermes, have switched to Raphael.
qtotter said:
confirmed. i will check what causes this later.
Click to expand...
Click to collapse
qtotter sann,
Wifi & Camera seem also have problem.
Wifi & Camera sometime got error when avaliable.
I will keep report if still have problem or bug.
Thanks!
Hello
23-05-2009
New Release 21231 Lite
16-05-2009
New release 21231 with Titanium Wm7 theme and voice command
link asus.forumpro.eu
29-04-2009 - New relase M2D 21501 lite version
http://rapidshare.com/files/226826384/FLASH.rar
I hope, you all had been waiting for it.
I took this M2D from Pdamobiz as adviced to me.
All tabs and options now work.
Enjoy and give me the feedback
21.04.2009 - New Release 21501.5.0.70 Full Version
http://rapidshare.com/files/223868105/21501_Full.7z
Instructions :
Extract the 7z archive
Flash using FLASH.BIN
Extract files from the start menu archive
async yr phone and just copy-paste these files in /Windows of your P320
Reboot.
I recommend to use asus themes and disable the asus phone skin as per the reg settings mentioned below.
Then the phone works fantastic.So far no issues with call, SMS, Internet
Highlights
-Microsoft My phone
-Microsoft Widgets
-Honeycomb with sharp icons
-Outlook Live
-Microsoft App store
-SPK skin for calculator
-Net framework 3.5
-New Version of IE
Pls post feedback.
18.04.2009 - New release 21501.5.0.71 (sorry posted wrong link earlier, fixed now)
http://rapidshare.com/files/222861886/FLASH.7z ( bug fixed)
Lite version with GPS catcher and office mobile.Free RAM on reboot is 25 MB.(Y)
I reconstructed XIP using the oldest and first ROM for p320.
Special thanks to xplode
Phone canvas improved.In case of problems, change the following registry :
HKLM>Security>Phone>Skin>Enabled>
change 1 to 0
Earlier Versions Below
Here is the link Lite version
http://rapidshare.com/files/220713234/FLASH.7z
Office
No java
Net CF 3.5
XIP changed for better kernel
New OEM pack
Pls give feedback
Will upload the ROM file soon..all I can say it is a full version with Office, WMLive, Net cf 3.5 and Core plyer.Look at the free memory after a fresh reboot
Here is the link.Pls feel free to give feedback.
http://rapidshare.com/files/219540576/FLASH.7z
Here are some pics build is 21198 AKU 5.0.0
Will b released soon.I am facing one small bug, that whenever I select to write a new SMS, the option doesn't get execute.Any one pls help solve this bug
As promised here is the release.
http://rapidshare.com/files/216487089/SMS_fix.rar.html
http://rapidshare.com/files/216486650/flash.rar.html
Procedure :
Unrar flash.rar
copy flash.bin to sd card(1 gb preferred)
volume down + reset.Keep pressing volume down till u see instructions on the screen of p320
Wait for reboot.
After flash, unrar SMS fix and copy all the files in Windows folder of p320,reboot.
Am not a great cooker, so not much decorations in this ROM, but I found it stable and very fast.
I once again thanks all who have helped/guided me.
I will post kitchen tomorrow.
YOutube link : http://www.youtube.com/watch?v=GYysNia0Tww
Video is shot from Asus p565
New SMS fix files:
Instructions :
Unrar, transfer on SD card
Install resco explorer
In resco explorer, go to file>options>browse>SHow hidden files
Then copy all files and send them to Windows Folder of P320.
If asked to overwrte?, select YES
Reboot
Ok guys,
Here is the link with SMS fixed version.I found that my build OStool was a bit old and SYS was not correct or proper.I requested xplode to share his BA SYS for 21198 and he was very kind and shared, bcos of which this version was possible Pls flash and let me know if all works OK.I have tested and the things are working fine.
http://rapidshare.com/files/217352875/flash.rar.html
Waiting....
was expecting it..
i have two chinese rom kitchen for asus p527, wm6.5 21189 nd 21193.. to make it english, i replaced the language folders 0804 to 0409 from wm6.5 wwe sys folders.. nd it worked but had the same small bug of creating or viewing any messages... i cant solve tht for my p527...
need help here too..
Wow! Way to go!
I'm waiting to get my hands on this
I have managed to work all, SMS still a problem but One can use O2 SMS plus..office removed, lots of OEM aaps removed, ROM is working fine so far, battery is excellent.If someone wants I can upload to rapidshare
PS I used my Own kitchen.If some one needs I can upload that too.I thank Juggler ,Mun,cmoex, startkwong for their excellent guidance.
Please upload the ROM. I'd love to try WM 6.5 on my P320.
Btw, what is the free memory available after boot when using this rom?
25 mb free memory when titanium is enabled..I am just amazed the power of this tiny device..we shd congratulate asus for making such a device
Pleaseeeee share
Can you please upload to 4shared.com? Its more friendly than rapidshare.
As far as kitchen is concerned, If you share it will be bonus for me. Currently i am trying with vivi kitchen. Still no success...
pls upload it.. even the kitchen.
thnx for making them!!
hdubli said:
25 mb free memory when titanium is enabled..I am just amazed the power of this tiny device..we shd congratulate asus for making such a device
Click to expand...
Click to collapse
Wow! Thats close to the stock asus rom, and it uses 6.1!
You sir, must've done some good optimization to get 6.5 working so nicely on the P320!
Please upload the rom!, I cant wait!
hdubli, according to screenshots, your mxipinit_startmenu_001.provxml does not work, or corrupted, or you had deleted it on purpose. Or you are missing png resources from Base_DPI_96.
No new pretty icons - only old default stuff from shellres.... Looks not good.
I will think about your SMS problem and will give some tips later.
AndrewSh said:
hdubli, according to screenshots, your mxipinit_startmenu_001.provxml does not work, or corrupted, or you had deleted it on purpose. Or you are missing png resources from Base_DPI_96.
No new pretty icons - only old default stuff from shellres.... Looks not good.
I will think about your SMS problem and will give some tips later.
Click to expand...
Click to collapse
I like the ROM clean and with basic stuff.Phones to b used as a Phone first, later as an entertainment stuff.This is my personal opinion.
Am not a very great cooker, just PPC lover so trying to do best I can.Let's hope, may be you can make it better on behalf of this community
Hi hdubli,
Thank you for posting the rom files!
I'll try to flash this on my P320.
As for the high-res icons, can one of you create a patch to enable them?
I'd love a change from the icons of 6.1
Anyways, Thank you so much for the work you put into this!
I only hope you keep making rom's for P320
rayraven said:
Hi hdubli,
Thank you for posting the rom files!
I'll try to flash this on my P320.
As for the high-res icons, can one of you create a patch to enable them?
I'd love a change from the icons of 6.1
Anyways, Thank you so much for the work you put into this!
I only hope you keep making rom's for P320
Click to expand...
Click to collapse
Thanks..I will try my best
cant write, read sms.. pls help!! i extracted 17 files from smsfix.rar to windows by resco explorer. had to overwrite all as asked by the app. rebooted it. BUT cant write or view any message. pls help..
apart from sms bug, the rom's simply awesome!!!
hi I checked its working in my device..have a look at video on u tube
is this rom worked in imate jama with windows mobile 5.
please tell me
thanking you
hatss off to ur post and ur work
Thanks hdubli it is great creation that you put forward. Congratulations!!!
All credit to you. Flashed it y'day. Quite fast and sleek.
On SMS front looks like I am also doing the same mistake. Not able to any functionality related to SMS/Text Msgs except listing them.
Still trying to figure out the way out. I may need kitchen now. Is it shared hdubli?
Thanks again.
sorry , links are died. I can't download them
i will reupload
First thx for helping me
I was trying to port a XIP from Touch Cruise
Yet it cant even boot in the system [only suck at the screen with the red words at the bottom]
Any clear tutorial for me. Thank you
You cannot just use the XIP from another phone.
You must get the XIP split into OEMXIPKernel and MSXIPKernel so that you can combine the new MSXIP with your existing Trinity OEMXIP.
And most of the time you would need to use the new build's SYS packages that go along with that new MSXIP.
What kitchen are using? Ervius Visual Kitchen?
the.decoy said:
You cannot just use the XIP from another phone.
You must get the XIP split into OEMXIPKernel and MSXIPKernel so that you can combine the new MSXIP with your existing Trinity OEMXIP.
And most of the time you would need to use the new build's SYS packages that go along with that new MSXIP.
What kitchen are using? Ervius Visual Kitchen?
Click to expand...
Click to collapse
Yes i am using Ervius Visual Kitchen
What i do is using the xipporterex to port the xip.
I even tried to follow the bepe tutorial from darkforceteam with bepe kitchen.
Yet same error occured.
Would u mind giving me a clear step for making it workable?
thx
Sorry but I have always used pre-extracted XIP/SYS bundles from people like Da_G that I then put into my kitchen. So I am not sure I can give you a full step through for porting the TC xip/sys from scratch.
One thing about the OEMXIP though, whenever I have used xipporterex I usually discard the generated ROM\Trinity\NEWBUILD# and replace it with a copy of my existing ROM\Trinity\OLDBUILD# (I just rename the folder to the new build number). It is just the ported ROM\Shared\NEWBUILD# folder that you want.
Again, you are also using the SYS\NEWBUILD# folder aren't you?
the.decoy said:
Sorry but I have always used pre-extracted XIP/SYS bundles from people like Da_G that I then put into my kitchen. So I am not sure I can give you a full step through for porting the TC xip/sys from scratch.
One thing about the OEMXIP though, whenever I have used xipporterex I usually discard the generated ROM\Trinity\NEWBUILD# and replace it with a copy of my existing ROM\Trinity\OLDBUILD# (I just rename the folder to the new build number). It is just the ported ROM\Shared\NEWBUILD# folder that you want.
Again, you are also using the SYS\NEWBUILD# folder aren't you?
Click to expand...
Click to collapse
Oh man! You are genius!!!
My rom comes bootable after renaming the folder!
That's so fantastic
Yet the xip of the system seems hasn't update [still the old build ]
Update
I used the old Build.. therefore, my device is bootable....
Yet when i choose back the new build, ext xip and sys as the neew version,
it suck again at the screen...
Thx man i know u have tried a lot to figure out my problem.
Is it possible or better, if i upload my kitchen for u to check?
OPzero said:
Oh man! You are genius!!!
My rom comes bootable after renaming the folder!
That's so fantastic
Yet the xip of the system seems hasn't update [still the old build ]
Click to expand...
Click to collapse
Oh thats easy. The "Rom Version" (that shows on boot) just needs to be patched (it is reading it from the copied OEMXIP).
Just go back into the Porting window then click the button "Find Date/Version on \ROM\Xip\"
That will populate the Rom Date and Rom Version fields.
You can then edit those fields and click each of the "Change" buttons to patch the newer Date/Version into the OEMXIP
You can also set the PagePool value using the "Change PP to Mb" function (it is not possible to query the current PP value however it does tell you what it previously was when you change it). You could always set it to something sensible like 4 or 6 and see what it was before that.
EDIT: If you were actually talking about the CE OS build number that shows in "About Device" then that is much harder to change. It is embedded somewhere within the MSXIP (requires hex editing I am not familiar with - and that is effectively make a "fake" build anyway).
OPzero said:
Update
I used the old Build.. therefore, my device is bootable....
Yet when i choose back the new build, ext xip and sys as the neew version,
it suck again at the screen...
Thx man i know u have tried a lot to figure out my problem.
Is it possible or better, if i upload my kitchen for u to check?
Click to expand...
Click to collapse
Oh, sorry just saw this ... yeah probably better to just do that.
Just curious but why on earth do you want to port some old TC 6.1 rom anyway?
There a plenty of functional WM6.5 xip/sys bundles that we can/have ported to Trinity. Even if it has be WM6.1 there are surely newer releases of 6.1 xip/sys to choose from?
EDIT: Just a heads up but I am about to go offline for the night (end of the work day in my timezone) so if you do upload I will not reply until tomorrow.
the.decoy said:
Oh, sorry just saw this ... yeah probably better to just do that.
Just curious but why on earth do you want to port some old TC 6.1 rom anyway?
There a plenty of functional WM6.5 xip/sys bundles that we can/have ported to Trinity. Even if it has be WM6.1 there are surely newer releases of 6.1 xip/sys to choose from?
EDIT: Just a heads up but I am about to go offline for the night (end of the work day in my timezone) so if you do upload I will not reply until tomorrow.
Click to expand...
Click to collapse
It's ok, would u mind pm or post some link which release those stuff?
Thank you very much!
I will still upload my rom and pm to u~
Check it when u hav time
really really thx
You could extract the 23102 wm6.5 build from my last kitchen release:
http://forum.xda-developers.com/showthread.php?p=5547181#post5547181
I have modified EVK slightly to allow it to build either p3600i or Trinity ROMs from the same kitchen but still there is a full QVGA xip/sys bundle there for 23102 (give or take a few sys packages).
Got to go, will try and be more helpful tomorrow
the.decoy said:
You could extract the 23102 wm6.5 build from my last kitchen release:
http://forum.xda-developers.com/showthread.php?p=5547181#post5547181
I have modified EVK slightly to allow it to build either p3600i or Trinity ROMs from the same kitchen but still there is a full QVGA xip/sys bundle there for 23102 (give or take a few sys packages).
Got to go, will try and be more helpful tomorrow
Click to expand...
Click to collapse
Yes I got it~ Thx
it is great
OK and now i am going to mod it~~
Yet just before i start, would u like suggesting me some post that is most updated and clear enough for me such a newbie to work around it?
Thx
OPzero said:
Yes I got it~ Thx
it is great
OK and now i am going to mod it~~
Yet just before i start, would u like suggesting me some post that is most updated and clear enough for me such a newbie to work around it?
Thx
Click to expand...
Click to collapse
Go and find SuperSport's Tutorial Video for using Ervius Kitchen.
I have broken up the EXT packages into categories to make it simpler for new chefs but the basic concept is the same.
I have included pre-built ROM profiles to make it very simple to build ROMs out-of-the-box.
Just got to "Load ROM", choose one for your phone (P3600i or Trinity) and the click "Create ROM" to build it.
Load a few different profiles and look at what changes in the settings. That should help you see what is going on.
Check out this thread for more tutorials and guides:
http://forum.xda-developers.com/showthread.php?t=669414
the.decoy said:
Go and find SuperSport's Tutorial Video for using Ervius Kitchen.
I have broken up the EXT packages into categories to make it simpler for new chefs but the basic concept is the same.
I have included pre-built ROM profiles to make it very simple to build ROMs out-of-the-box.
Just got to "Load ROM", choose one for your phone (P3600i or Trinity) and the click "Create ROM" to build it.
Load a few different profiles and look at what changes in the settings. That should help you see what is going on.
Check out this thread for more tutorials and guides:
http://forum.xda-developers.com/showthread.php?t=669414
Click to expand...
Click to collapse
1 more question
I downloaded a XIP SYS Pack from
http://forum.xda-developers.com/showthread.php?t=650783
However there are 5 Folders
How can i port them into the kitchen?
Thx for that
OK, this technically requires more time than I can spare to explain thoroughly ... but maybe if I just outline the steps you can do some google searching to work out exactly how to do it:
- First you need to clean up the SYS for you needs. For Trinity you need to have QVGA sys structure so that means only 96DPI and 320x240
- That means sorting the SYS package folders into an EVK SYS structure and removing the other DPI and resolution folder structures.
- Go get XIPDumpSoter (or whatever it is called now) by teh penguin so that you can use it to automatically sort the folders. Then delete any that are for other DPI or RES (eg: 192DPI or 640x480, etc). You _only_ want 96DPI and 320x240 (and of course any that are non-res specific)
- That should give you the folder structure to put into \SYS\NEWBUILD#\
- You will need to copy over the WINCENLS sys package from your existing SYS as that will not be in the new SYS (there are other replacement folders like SQM_DUMMY, and also some that we often just delete but you can learn that stuff later)
- We have already discussed what you need to do with the MSXIP
- Lastly, (and this is really very much the "art vs sicence" part), you will need to go through and "recmod" a certain number of "modules" within certain sys packages.
I simply don't have the time right now to get into recmod but if you google you will find plenty of helpful posts explaining it. I think there is even a basic recipe of what to recmod for 64M users done by JooJooBee ... that would get you going.
Put simply, at this stage you need to read read read read read lots of chef threads to pick up the finer details. Sorry I am too busy at work to be any more help than this.
Good luck.
Thank you for spending time on me
I know it is rather annoying to explain a few things
Really Really Thank you for helping me
I hope that my post could be a guide for others
Update:
The rom is still unbootable after a day of trying.
Does the OEM section be edit before updating the build?
Such as initflashfiles.dat [I read the in the tutorial that it should change to the native 6.5]
May be i started from the wrong step?
What i concern is that wm6 may not suitable to update directly to wm6.1 or wm6.5
Thank you for spending much time on helping me
If it can be google, simply give me the keyword,
I will finish the entiry
And finally, thank you!!
OPzero said:
Thank you for spending time on me
I know it is rather annoying to explain a few things
Really Really Thank you for helping me
I hope that my post could be a guide for others
Update:
The rom is still unbootable after a day of trying.
Does the OEM section be edit before updating the build?
Such as initflashfiles.dat [I read the in the tutorial that it should change to the native 6.5]
May be i started from the wrong step?
What i concern is that wm6 may not suitable to update directly to wm6.1 or wm6.5
Thank you for spending much time on helping me
If it can be google, simply give me the keyword,
I will finish the entiry
And finally, thank you!!
Click to expand...
Click to collapse
I'm actually going to bed before 3am tonight, so I will not be long here, but I just had a thought. When you cook the ROM, are you checking "Real WM 6.5 AKU" in the Kitchen? Don't do that. You cannot actually use a Native 6.5 Kernel on the Trinity as one does not exist. Also, as mentioned by the.Decoy before, you MUST have 'wince.nls' in your Kitchen somewhere or it will not boot. Thirdly, try cooking a version without ANY Extended packages. Only the original XIP and SYS and see if that boots. When you get that going smoothly, start adding EXT packages. Good Luck!
I'll check back in a couple days to see if you've made any progress. If you'd like to send your kitchen to me also, I'd be happy to look it over and see if I can find anything wrong in there.
Again and Again
I keep remind myself that Native 6.5 Kernel should be checked
OMG The Bug is here
And Thanks Decoy
Thank You
Thank You!!!!!!!!!!!!
================================
Update:
I saw a folder called 0_ROM_Version in EXT Shared
What is it and what function does it have?
Thx
OPzero said:
Does the OEM section be edit before updating the build?
Such as initflashfiles.dat [I read the in the tutorial that it should change to the native 6.5]
Click to expand...
Click to collapse
Ummm are you trying to use a freshly extracted OEM from an official ROM?
If so then yes, there is a massive amount of conversion that must be done to it before you an cook it into a rom. Even before you break it up in to components and edit all the reg and dat files ... you first need re-sign everything with an SDK cert because you won't have the official cert that HTC built them with.
Seriously. If you are just starting out then use an existing chef's OEM (use mine or anyone else who has posted a kitchen).
Even I have not yet ever had the time to complete build an OEM from scratch (not that I don't want to one day). I was always just adapting the OEM that Chanvi had provided us in his kitchen, primarily because he had already done all the work to make it mesh with WM6.5
OPzero said:
Again and Again
I keep remind myself that Native 6.5 Kernel should be checked
OMG The Bug is here
And Thanks Decoy
Thank You
Thank You!!!!!!!!!!!!
================================
Click to expand...
Click to collapse
I am bit confused by what you said there
As Supersport explained, we do not have a Native 6.5 kernel for Trinity.
So that option should not be checked.
OPzero said:
I saw a folder called 0_ROM_Version in EXT Shared
What is it and what function does it have?
Thx
Click to expand...
Click to collapse
Again, this is why I said to try "Load ROM" and see what happened
Those are just simply EXT packages which contain 1 single provxml. Each one sets the registry value for "ROM Version" (the info that comes up in "About Device" in Settings). There is one for every type of "Saved ROM" you can build from that kitchen.
I created them so that people could build each of the several types of rom from my kitchen but never need to edit the provxml files to change what the version info was.
If you are going to try cooking your own roms, the best advice I can give you is find a text editor you like and just start opening up ALL of the REG DAT RGU and PROVXML files you can find and see what they are doing.
You can even do it from within EVK. Select the type of file on the left panel called "Editors" (or just select "All") then click "Show Editor". You can open the files it finds by double clicking them in the panel on the right.
Anything custom that ever happens in the setup of a rom is controlled by these files.
If you want to see how something works (or what it does), just open up the files and read them
Sorry, wt i mean is that my rom become bootable after unchecking it
~~ That is so amazing ~~
Now i am Reading the horrible, endless.....etc tutorial, [I can finally have my own rom ]
1 Question, I am trying to put a new wince.nls which content much more countries in the rom. Yet it comes unbootable after i have repalced it.
I googled around and found several solutions.
1 is that i should put it in OEM rather than SYS [I havn't ried it yet i think it won't work]
2 is that i should mod the size of the xip.bin
Therefore it is big enough to store it.
3 Adding in some registry with my selected country code
Thanks for helping me ~~
Sorry can't help you there.
I have never ventured beyond WWE lang for my kitchens.
OPzero said:
1 Question, I am trying to put a new wince.nls which content much more countries in the rom. Yet it comes unbootable after i have repalced it.
I googled around and found several solutions.
1 is that i should put it in OEM rather than SYS [I havn't ried it yet i think it won't work]
2 is that i should mod the size of the xip.bin
Therefore it is big enough to store it.
3 Adding in some registry with my selected country code
Thanks for helping me ~~
Click to expand...
Click to collapse