can someone please point me to where i can get ROMs for the new iPAQ 211.
i would like to upgrade to 6.1 if possible. (HP isn't gonna do it....)
thanks
hx2000???
http://forum.xda-developers.com/showthread.php?t=383173
no, like the 210, 211, 212, 213 or 214...
No such beast exists. You are stuck with 6.0 until someone hacks it. But what is wrong with the version you have?
Alan
alan sh said:
No such beast exists. You are stuck with 6.0 until someone hacks it. But what is wrong with the version you have?
Alan
Click to expand...
Click to collapse
Not exactly wrong. But the existing ROM is simply very BUGGY. It can´t compare to the cooked one I´d installed on my past Loox C550 device. There´d be no end to whatever goes wrong with Wi-fi and Bluetooth, CF card support, power management , general instability of the system, various software incommatiblity issues etc. But so far we have to live with it.
Hikoki said:
Not exactly wrong. But the existing ROM is simply very BUGGY. It can´t compare to the cooked one I´d installed on my past Loox C550 device. There´d be no end to whatever goes wrong with Wi-fi and Bluetooth, CF card support, power management , general instability of the system, various software incommatiblity issues etc. But so far we have to live with it.
Click to expand...
Click to collapse
Yup, my 211 is now on the shelf and waiting for an update. My hx4705 is now back in service with Kozura's WM6.1 v5 ROM. I have lost more data with the 211 than ALL the IPAQ's I have used over the years...combined. It is a sad day when the 'development ROM's - not to be used for daily operation' are more stable than the ROM in this new device!
So, I hear that the 21x series bootloader is difficult. Does anyone have details of what the roadblocks are?
dceggert said:
Yup, my 211 is now on the shelf and waiting for an update. My hx4705 is now back in service with Kozura's WM6.1 v5 ROM. I have lost more data with the 211 than ALL the IPAQ's I have used over the years...combined. It is a sad day when the 'development ROM's - not to be used for daily operation' are more stable than the ROM in this new device!
So, I hear that the 21x series bootloader is difficult. Does anyone have details of what the roadblocks are?
Click to expand...
Click to collapse
if you know how to enter the bootload mode of hp21x,I can make a rom for you
bluegatar said:
if you know how to enter the bootload mode of hp21x,I can make a rom for you
Click to expand...
Click to collapse
Hi,
a friend has an ipaq 214 and has difficulties with the original rom (CF-GPS, Wlan).
Therefore I'm also interested in a 6.1 ROM.
I'll call HP on monday to get support - maybe I should ask them how to get into the bootloader mode (if there is any)?
Is there anyone who could really make WM6.1 rom for 214?
That would really be something...
i'm looking for english rom for hp 214. Can someone upload it?
bluegatar said:
if you know how to enter the bootload mode of hp21x,I can make a rom for you
Click to expand...
Click to collapse
We need ENGLISH Rom!!! First thing - find rom, bootloader - is next task.
if you tell me how to copy my rom from pda, i can send you
http://www.handhelds.org/moin/moin.cgi/HpIpaq214HowTo
Looks like someone has figured out how to put their Ipaq 214 into bootloader mode. Their page says to hold down the Calendar & Windows keys and then soft-reset.
Any luck with a 6.1 rom for ipaq 2xx yet?
bluegatar said:
if you know how to enter the bootload mode of hp21x,I can make a rom for you
Click to expand...
Click to collapse
Any luck yet making a wm 6.1 rom for ipaq 21x?
I have the English ipaq 211 version and would really like to try 6.1 to see if it fixes any of the 6.0 instability issues.
Here's the link again the other poster referred to for getting into bootloader mode on the ipaq:
http://www.handhelds.org/moin/moin.cgi/HpIpaq214HowTo
Thanks! tom
Good work. Now the work is how to get the rom file.
My most wantted thing is flashing the 212 to the chinese rom.
Hi,everybody, I have got the ipaq 212 english rom. And I can extract it.
Can somebody give me the ipaq 214 Chinese rom?
The method is :
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
use pdocread tools to do this:
pdocread -l
"
224.38M (0xe060000) DSK1:
| 1.50M (0x17f000) Part00
| 2.13M (0x220000) Part01
| 57.88M (0x39e0000) Part02
| 162.88M (0xa2e0000) Part03
1.91G (0x7a1fc000) DSK2:
| 1.91G (0x79f00200) Part00
1.88G (0x78800000) DSK3:
| 1.88G (0x787e0600) Part00
24.75M (0x18c0000) IPQ1:
| 24.75M (0x18bf000) Part00
STRG handles:
handle e6f4f7da 24.75M (0x18bf000)
handle a701d116 1.88G (0x787e0600)
handle 4796c202 1.91G (0x79f00200)
handle 67c8652a162.88M (0xa2e0000)
handle 67c9a11a 57.88M (0x39e0000)
handle 07c9a0f6 2.13M (0x220000)
handle a7c9a0ae 1.50M (0x17f000)
disk e6f4f7da
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a701d116
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4796c202
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 67c8652a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 67c9a11a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 07c9a0f6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a7c9a0ae
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
"
then
pdocread -w -d DSK1: -b 0x800 -p Part02 0 0x39e0000 Part02.raw
the part02.raw is the rom file
I can use viewimgfs tools to extract the part02.raw file.
Now can some body flash the rom ?
You can download the english rom file from this
http://bbs.pdafans.com/viewthread.php?tid=649400&extra=page=1&filter=type&typeid=240&area=
Can somebody try to use pdocwrite command to write the ROM?
finally something is moving with 21x roms....
great news, now we just need to find someone smart, to make wm6.1 rom!
thank you everyone for informations!
WODP
The good news is I have got the English and Chinese ROM file.
The bad news is :when I try to write the ROM with pdocwrite tools, it failed, the pdocwrite tools said "media protected". So I can't flash the rom file to the machine now.
So we need the solution of get the ipaq to the bootloader mode or the way to update with sd card.
Can someone help ?
wizard_mini said:
The good news is I have got the English and Chinese ROM file.
The bad news is :when I try to write the ROM with pdocwrite tools, it failed, the pdocwrite tools said "media protected". So I can't flash the rom file to the machine now.
So we need the solution of get the ipaq to the bootloader mode or the way to update with sd card.
Can someone help ?
Click to expand...
Click to collapse
I'm assuming that you've already tried this http://www.handhelds.org/moin/moin.cgi/HpIpaq214HowTo
Related
Hi there,
i'm searching for a solution how to dump the MS Emulator Images!
i found something here:
http://forum.xda-developers.com/showthread.php?t=307968
but ImfgsTools didn have the -emu option anymore!! And i cant find the RC1 to download..
is there an other way to dump the Files??
ok i found some more infos...
i've found itsutils ...
this is the output of "pdocread.exe -l"
89.82M (0x59d3000) MSFlash
| 1.81M (0x1d0000) Part00
| 87.95M (0x57f3000) Part01
31.50M (0x1f7f000) RAMFMD
| 31.50M (0x1f7ec00) Part00
STRG handles:
handle f7f74fde 31.50M (0x1f7ec00)
handle f7fc09f2 87.95M (0x57f3000)
handle 97fc0832 1.81M (0x1d0000)
disk f7f74fde
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk f7fc09f2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 97fc0832
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
but i cant dump the part01
"pdocread.exe -w -d MSFlash -p Part01 0 0x57f3000 test.raw"
CopyTFFSToFile(0x0, 0x57f3000, test.raw)
ERROR: ITReadDisk : read 00000000 bytes - Falscher Parameter.
without -w there comes following message:
ERROR: ITReadDisk : read 00000000 bytes - Ein an das System angeschlossenes Gerõ
t funktioniert nicht. (Device on System isn't responding)
Try this version:
http://rapidshare.com/files/104293714/imgfstools.rar
i am triing to port RC2.1 version to full english
using this guide
http://forum.xda-developers.com/showthread.php?t=307968
Do you have an other rom base for Wm6 or Wm6.1?
Hi
Dump from phone of a friend :
ROM version : 1.13.73.1
DATE of ROM : 01/29/08
Radio ROM : 03.18.90
Protocole : 4.1.13.60
OS : WM Mobile 6 Pro 5.2.1944 (Build 18547.0.7.3)
pdocread -l
99.18M (0x632d000) DSK1:
| 3.08M (0x313400) Part00
| 3.32M (0x352800) Part01
| 92.78M (0x5cc7000) Part02
142.12M (0x8e1e800) DSK2:
| 142.12M (0x8e1e400) Part00
STRG handles:
handle 53aedb0a142.12M (0x8e1e400)
handle d3ba8dc2 92.78M (0x5cc7000)
handle 53ba8fce 3.32M (0x352800)
handle d3bc5dda 3.08M (0x313400)
disk 53aedb0a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk d3ba8dc2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 53ba8fce
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk d3bc5dda
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C:\ROM>pdocread -w -d DSK1: -p Part00 0 0x313400 part00.raw
CopyTFFSToFile(0x0, 0x313400, part00.raw)
C:\ROM>pdocread -w -d DSK1: -p Part01 0 0x352800 part01.raw
CopyTFFSToFile(0x0, 0x352800, part01.raw)
C:\ROM>pdocread -w -d DSK1: -p Part02 0 0x5cc7000 part02.raw
CopyTFFSToFile(0x0, 0x5cc7000, part02.raw)
And the last One, part00 of DSK2: of 142.12M
C:\ROM>dir *.raw
Le volume dans le lecteur C s'appelle Master
Le numéro de série du volume est C684-5249
Répertoire de C:\ROM
14/04/2008 19:28 3*224*576 part00.raw
14/04/2008 20:23 149*021*696 part00bis.raw
14/04/2008 19:29 3*483*648 part01.raw
14/04/2008 19:38 97*284*096 part02.raw
4 fichier(s) 253*014*016 octets
As you can see the part00bis.raw is big, but the phone have "Orange navigator" and perhaps the map is in this area. Someone can confirm this ?
I want to upload to FTP but Log/pass xdaupload seems don't work
Orange navigator is not included in the ROM. It's been placed on the 1gb micro sd card bundled with the phone (nice bundle I have to say, since they provide a car charger, a phone/GPS car holder plus what you find in other HTC packs).
On the micro SD, your friend will find a cab that will be auto installed when you insert the card.
It's a shame Orange removed TomTom and only provides their poor navigator.
i know this cab is made to install orange navigator,but, no map ?
For info, i install tomtom 6.020 and a map : works perfectly
Just set the GPS antenna : NMEA 4800 and COM4
Maps are downloaded from orange servers when planning a way to go. That's what makes their home cook navigator so bad imho.
You can also nemea com4 at 9600 bauds. Indeed TomTom works perfectly. I called Orange today to tell them I was kinda disappointed that they removed TomTom from the bundle. They replied that it was made on purpose to only offer a pay as you go AGPS program (aka Orange Navigator). They also added that if customer were not ok with this, they could as well buy TomTom for about one hundred euros. Their policy is quite simple: Pay and shut up. Anyway I already own TomTom but would have loved to get an extra license...
Pharos is an OK phone. Not the best but ok. (I'll probably buy a TyntII by the end of the year or equivalent but got the pharos for free in replacement of a touch). Since I dont use Wifi that much and tought that HTC cube was sometimes a real pain in the neck, the lack of such features is not that bad (I'll rather buy a laptop soon and get a larger screen, decent browsing and so on with wifi).
Final words: Please, please, please admins open a new section for Pharos...
DoZe2 said:
Hi
Dump from phone of a friend :
ROM version : 1.13.73.1
DATE of ROM : 01/29/08
Radio ROM : 03.18.90
Protocole : 4.1.13.60
OS : WM Mobile 6 Pro 5.2.1944 (Build 18547.0.7.3)
Click to expand...
Click to collapse
I've got exactly the same thing.
Do you know Pharos is not present on the HTC e-Club? (they do not recognize my serial number)
Hello every body
Im agree when a new section with pharos ??
For the eHTC Club, got the same pb SN not recognize ??? Why ??
Did someone replace the original ROM form HTC against the one give with orange ?
I saw a Pharos "without operator" and it seems to go faster than mine !!!
For people who want to install SDHC 8Go, i confirm there no problem with PHAROS.
Jefferalgan
Pharos Sub-Forums
Guys, the Pharos Sub-Forums has already been launched. I hope to see you soon.
As per the title, could some kind soul, please upload the stock ROM and SPL. Should any of us need to send the MDA Compact IV back for repair.
Thanks...
i am still running the stock rom but not the spl i upgraded to hardspl 1.40 delveloper.
of there is a guide up for dumping the rom off the device then i will be more then happy to share. if someone can point me the right way.
ofcourse if anyone can still grab the stock spl. that would be cool too
mattie01 said:
i am still running the stock rom but not the spl i upgraded to hardspl 1.40 delveloper.
of there is a guide up for dumping the rom off the device then i will be more then happy to share. if someone can point me the right way.
ofcourse if anyone can still grab the stock spl. that would be cool too
Click to expand...
Click to collapse
follow this:
http://forum.xda-developers.com/showpost.php?p=2370527&postcount=10
from what I understand the spl don't differ from the htc one or from other providers. so no need there
Just ordered mines today, apparently there were 50 in stock when i called them, after i ordered mine on upgrade there were 30 left so be quick to get one. They said that it should arrive by 1pm on TUESDAY!!! don't think that i can wait that long. lol
Upgrade details:
MDA COMPACT IV- £99.99
12 Month Contract: £15.00 (100mins +100txt)
Total over contract: £280.00
Tell me if thats a good deal.
Cheers
I will get my T-Mobile Compact IV on next thursday. If nobody else has already graped and uploaded the stock ROM, then I will try to do it. Shoud not be a problem for an IT-er, think so
I also like to have a copy of the stock ROM before trying to install one of the cooked newer ROM from TLR or DPT.
Will also try to grab the stock SPL if possible.
teammee, thanks for the link, I will try to read the manual first
Can anyone tell me if the compact 4 has wifi? i thinik they have removed it but now too sure.
yes the compact 4 has wifi.
i tried following the link and i am able to access the phone using pdocread -l to get a list of partitions on the phone.
C:\itsutils>pdocread -l
210.63M (0xd2a0000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 118.25M (0x7640000) Part02
| 84.88M (0x54e0000) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
STRG handles:
handle 4654f2e2 3.75G (0xf0000000)
handle a7c9f8da 84.88M (0x54e0000)
handle c7db27be118.25M (0x7640000)
handle c7db279a 4.38M (0x460000)
handle a7db2752 3.12M (0x31f000)
disk 4654f2e2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a7c9f8da
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c7db27be
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c7db279a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a7db2752
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
then i try and run
C:\itsutils>pdocread -w -d DSK1: -p Part00 0 0x31f000 Part00.raw
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
ERROR: ITReadDisk : read 00000000 bytes - The parameter is incorrect.
so i guess i am doing something stupid...
There has been links for a couple of weeks for a T-Mobile Stock Rom.
Here you go:-
http://forum.xda-developers.com/showthread.php?t=405835&highlight=t-mobile+stock+rom
&
http://forum.xda-developers.com/showthread.php?t=406423&highlight=t-mobile+stock+rom
Oh and the errr Stock SPL's
http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
Paleaos said:
There has been links for a couple of weeks for a T-Mobile Stock Rom.
Here you go:-
http://forum.xda-developers.com/showthread.php?t=405835&highlight=t-mobile+stock+rom
&
http://forum.xda-developers.com/showthread.php?t=406423&highlight=t-mobile+stock+rom
Oh and the errr Stock SPL's
http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
Click to expand...
Click to collapse
many thanks..
Thanks from me too!
Things like that should really be a sticky, or in the Wiki. I spent ages looking and found nothing, hence my original post!
After finding these, I've already made the jump and tried my 1st rom. Elite 3.0!
Must say I'm pretty impressed after running the stock T-Mobile for 4 days. Now I've got my head round all this I went for it.
There seems to be no definative choice of rom, it's down to personal preference, but after using T-Mobiles V1.37 and Radio .03, I now also upgraded to Radio .05
Both the Elite rom and new radio add up to a far superior phone. Take the leap, it's worth it.
Can't see anyone wanting to go back to the T-Mobile stock rom unless your sending it back under warranty for replacement.
Enjoy!
PS. I've been using Symbian phones for years Nokia 6630, 6680, N80 and finally N95. It took a bit of reading, but once you get your head round it, it's Simple.
PPS. The Elite rom 3.0 also includes all the settings for T-Mobile that runs in a wizard, but if you fancy another rom then you can download a settings CAB file that includes the T-Mobile settings if it's not included in the rom you choose.
And here is the CAB for the T-Mobile settings
http://www.modaco.com/content/htc-d...g-database-fix-adds-t-mobile-connection-data/
Paleaos said:
There has been links for a couple of weeks for a T-Mobile Stock Rom.
Here you go:-
http://forum.xda-developers.com/showthread.php?t=405835&highlight=t-mobile+stock+rom
&
http://forum.xda-developers.com/showthread.php?t=406423&highlight=t-mobile+stock+rom
Oh and the errr Stock SPL's
http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
Click to expand...
Click to collapse
Thanks! Will still grab my stock ROM when I get the phone, so we can add the Dutch stock T-Mobile ROM to the list.
Download Dutch stock T-Mobile MDA Compact IV ROM here:
http://rapidshare.com/files/1324381...iamond_52.26a.25.09_Radio_1.00.25.03.rar.html
killabie said:
Download Dutch stock T-Mobile MDA Compact IV ROM here:
http://rapidshare.com/files/1324381...iamond_52.26a.25.09_Radio_1.00.25.03.rar.html
Click to expand...
Click to collapse
Can somebody help me please?
I've downloaded the dutch mda 4 stock rom, but it doesn't come with a update utility. so i tried another installer but it gives me an error on 1%
Then it says: "this update utility cannot be used for your PDA phone. please check your update utility"
anyone knows how to flash the file or knows what update utility i can use?
thanks in advance
Download custom RUU,put the file in the folder with custom RUU and flash.
skrap3 said:
Download custom RUU,put the file in the folder with custom RUU and flash.
Click to expand...
Click to collapse
Thanks fot the quick reply.
i've tried it but still the same error..
i have spl olinex 1.40..this got anything to do with the problem?
dazzie said:
Thanks fot the quick reply.
i've tried it but still the same error..
i have spl olinex 1.40..this got anything to do with the problem?
Click to expand...
Click to collapse
Dit you solve the problem and how?
Hi to all the Samsung experts, I currently have a Samsung i900 and am looking for a way to extract my rom and create a flashable format. I have used pdocread to extract 3 .raw files but am not sure how to proceed from here. Can anyone advise? Thanks.
Hoping that the i780 istruction can be used for the omnia, the relevant posts are here..
http://forum.xda-developers.com/showpost.php?p=2237280&postcount=10
http://forum.xda-developers.com/showthread.php?t=393490
Thanks, I have read those threads, problem is you apparently need a flashable .bin to start with which in this case I do not so am looking for a way to use the .raw files only. Do you know if that is possible?
efjay said:
Thanks, I have read those threads, problem is you apparently need a flashable .bin to start with which in this case I do not so am looking for a way to use the .raw files only. Do you know if that is possible?
Click to expand...
Click to collapse
No you don't need the bins, you can start from the raw files.
Just look at the famusc kitchen and read the included instructions.
Ok here is a way to dump the nb file and then dump its contents.I have already done that, including xip
Use itsutils and following command in dos window :
psdread -1 0 0xDISKSIZE os.nb
Then use imgfs tools or tazio tools to dump, and further processing.
We need now how to flash back the custom os.nb to omnia
still searching for sd card flashing combinations
@The Solutor: I have read the famusc kitchen docs and it explicity states you need an existing .bin PDA rom. However there are a few commands in there that may be worth checking out.
@hdubli: I will try the command you suggested later today. What are the tazio tools? And dont Samsung phones use .bin files to flash rather than .nb?
You don't need the bin.
Here step by step:
- Downlad and install the kitchen
- Copy Part02.raw into the kitchen folder
- Open cmd and type: ImgfsToDump Part02.raw (This will create dump folder)
- Execute RecreateBin.exe
You got your bin file!!!!
mievalt said:
You don't need the bin.
Here step by step:
- Downlad and install the kitchen
- Copy Part02.raw into the kitchen folder
- Open cmd and type: ImgfsToDump Part02.raw (This will create dump folder)
- Execute RecreateBin.exe
You got your bin file!!!!
Click to expand...
Click to collapse
Do you mean RecreateBin.bat? There is no RecreateBin.exe and looking at the contents of the .bat file I dont think it will work as it makes reference to i780 files which I dont have and most likely wont work with the Omnia.
imgfsfromdump imgfs_raw_data.bin new_imgfs.bin
del imgfs_raw_data.bin
ren new_imgfs.bin imgfs_raw_data.bin
make_imgfs i780.nb0.payload.body -nosplit
merge i780.nb0.payload.header i780.nb0.payload.body i780.nb0.payload
nbmerge -data 2048 -extra 8 i780.nb0 -conservative
yes it is the .bat file sorry.
I780 should just be name of the files that you get at the end...
I can't say if it works you just have to give it a try...
But that would be the way we do it with our i780 roms...
Try and report. You should get a i780.bin file.... otherwise it should stop with an error.
I have a Samsung Omnia German version and would like to get the english version. Anybody know where to find the WWE ROM and CID unlock or what i need to install it?
any luck
Any luck on cooking a samsung i900 Rom
JesperRas said:
I have a Samsung Omnia German version and would like to get the english version. Anybody know where to find the WWE ROM and CID unlock or what i need to install it?
Click to expand...
Click to collapse
What does ur version read?
My one read i900XXHE4. I am also looking for way to upgrade to i900DXHG4
anyone manage to extract the rom?
or is there anyway i could extract those dll in the roms?
would like to try reverse it see if can extract the data for the accelerometer
Link
Here is the Link
For the update
any body can backup the rom G2 and previous and let us flash it? i sooo want the old rom back.. G4 fully sucked with too many issues on it..
What is the build info on G4?
I can dump the rom but you will have my serial #
silencer22 said:
anyone manage to extract the rom?
or is there anyway i could extract those dll in the roms?
would like to try reverse it see if can extract the data for the accelerometer
Click to expand...
Click to collapse
it looks like a .bin file and oddly enough executing it changed all my Atom .nb0 files to 'open with' USDL4...
Do kitchen tools exist or Perhaps somebody could be commisioned to make tools for us, I'd be up for that!
whats the go on creating a flashable rom? i tried to flash chinese G8 rom and i regretted it.. now i cant flash it back to WWE G4 rom. =( anyone here able to make flashable rom or F8 or G2 WWE roms? pls pls pls..
I tried to back up my i900 Omnia ROM and get this:
C:\12>pdocread -l
128.46M (0x8076000) DSK1:
| 1.47M (0x179000) Part00
| 2.58M (0x295800) Part01
| 124.40M (0x7c66800) Part02
90.44M (0x5a70000) DSK2:
| 90.43M (0x5a6f000) Part00
0.00 (0x0) DSK5:
| 0.00 (0x0) PART00
15.00G (0x3c0000000) DSK3:
| 15.00G (0x3bffffc00) Part00
STRG handles:
handle 6698a06e 15.00G (0x3bffffc00)
handle a698a026
handle c6cc2472 90.43M (0x5a6f000)
handle 06e0479a124.40M (0x7c66800)
handle 26e04776 2.58M (0x295800)
handle 26e0472e 1.47M (0x179000)
disk 6698a06e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a698a026
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c6cc2472
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 06e0479a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 26e04776
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 26e0472e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C:\12>psdread -1 0 0xDISKSIZE os.nb
remote disk 1 has 65772 sectors of 2048 bytes - 128.46Mbyte
SerialNr: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CopySDCardToFile(remote, 1, 0x0, 0xd, os.nb)
ERROR: ITReadSDCard - The parameter is incorrect.
C:\12>pdocread -w -d FLASHDR -p Part00 0 0x179000 Part00.raw
ERROR: ITTFFSGetInfo - The device is not ready for use.
WARNING: using default 512 bytes for sectorsize
CopyTFFSToFile(0x0, 0x179000, Part00.raw)
ERROR: ITReadDisk: outbuf==NULL
- The device is not ready for use.
Any thoughts?
I am improving :
C:\12>psdread -1 0 0x8076000 i900XHHG4.nb
remote disk 1 has 65772 sectors of 2048 bytes - 128.46Mbyt
SerialNr: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CopySDCardToFile(remote, 1, 0x0, 0x8076000, i900XHHG4.nb)
but I am waiting more than 30 min and no activity. How long does it take to copy 128MB?
Mio P360&P560 ROM CEimage [BETA Official] / Boot Menu / [HOW TO] dump a ROM, by ansar
Hi,
Update on 3/10/2010 10:35 AM:
The following are the findings for the ROM image upgrade procedure, after an extensive testing:
1. The MS_IPL image has been identified.
2. It is not yet possible to dump the boot loader image due to the MS_IPL image placing on almost the same memory location.
3. Due to the above we cannot yet define the accepted by the boot loader ROM CE image layout.
4. The one way is to assume a layout and test it to see if it is accepted.
5. This way is completely safe.
6. It was identified the internal (final) layout of the ROM CE image by direct read access to the chip.
7. The result of this reading was 100% error free that denotes the possibility of error free writing directly to the chip.
8. This last writing (directly on the chip) it is not yet tested due to the possibility to damage the device.
9. The internal (final) ROM CE image noted at (6.) above is already in our hands but not tested yet.
10. This is the second way to the ROM upgrade procedure, but we do not know if it is safe as that of reading the chip.
Development will be continued on both ways, in order for the ROM upgrade to be finalized.
Thanks to pavlac and mumux for their extensive help and testing.
A. Screens of the official version
Pending ...
B. Download Links
Pending ...
C. Instructions to successfully flash the rom image
1. Make sure that P560 can be connected and synchronized with your PC / Laptop.
2. Use the procedure bellow to enter the boot loader menu.
3. Form the Uboot Menu select 0=WINCE Upgrade and press right key.
4. From WINCE Upgrade menu select 3=WINCE by USB and press right key.
5. From your PC run dnw5.0e.exe program.
6. Select USB port>Status and see if the USB info screen is displayed.
7. Select USB port>Transmit and open the provided file.
8. Wait for the process to finish, disconnect and slide bottom switch to OFF.
9. Wait one minute and slide bottom switch to ON in order to perform a hard reset.
End of Update
IMPORTANT UPDATE on 10/9/2010 16:35 PM:
Before issuing the relevant official ROMs derived from the partxx.raw files
it is very important for each distribution i.e. WWE, FRE, ELL etc to have the checksum of each ROM.
In order to achieve this, the owner of a specific build should perform as follows:
************************************************** **************
A. Evaluating the checksum:
1. Enter to uboot loader main menu as described bellow after this update.
2. On the main menu by pressing down the jostick navigate to [4=Memory Tools] and select it by pressing-in the joystick.
3. On the Memory Tools menu by pressing-in the joystick select [0=ROM CheckSUM], get it and write it on a media.
4. Select [2=Exit] in order to exit the Memory Tools and return to main menu.
************************************************** **************
B. Evaluating CPLD_32 and CPLD_64 user code:
5. On the main menu by pressing down the jostick navigate to [5=Other Tools] and select it by pressing-in the joystick.
6. On the Other Tools menu by pressing down the jostick navigate to [2=read CPLD_32 user code], get it and write it on a media.
7. On the Other Tools menu by pressing down the jostick navigate to [3=read CPLD_64 user code], get it and write it on a media.
************************************************** **************
C. Evaluating Nand Tools
8. On the Other Tools menu by pressing down the jostick navigate to [4=Nand Tools] and select it by pressing-in the joystick.
9. You can write down on a media what this screen is displaying.
a. Exit the uboot menu by sliding the bottom switch to power off.
************************************************** **************
Now if you have a WWE distribution you can post the above results in the form:
My Boot loader header: CHUD_350_UT_Rxx_yyyy_2G or CHUD_350_UT_Rxx_yyyy_512M or whatever.
WWE CheckSUM: 0x........ CPLD_32: 0x........ CPLD_64: 0x........
followed by the description of your Nand Tools menu.
************************************************** **************
Thanks for commenting and supporting.
************************************************** **************
************************************************** **************
Update on 7/9/2010:
The thread is updated due to final info on entry to uboot loader menu.
[HOW TO] dump your original ROM is added,see bellow.
The next step is the development of custom/official ROMs.
****************************************************************
There are at least two ways to enter the Boot Loader menu:
****************************************************************
A. First way.
1. Disconnect usb and power adaptor (all) cables from the device.
2. Turn the device to power off by sliding the bottom switch from ON to OFF position.
3. Press and HOLD the device top power button and then slide the switch from OFF to ON position.
Important note: KEEP holding top power button when sliding bottom power switch and release it when enter to bootloader.
****************************************************************
B. Second way.
1. Disconnect usb and power adaptor (all) cables from the device.
2. Turn the device to power off by sliding the bottom switch from ON to OFF position.
3. Hold JOYSTICK RIGHT + press and hold RIGHT BUTTON.
4. Slide bottom switch to ON
Important note: KEEP holding JOYSTICK RIGHT + RIGHT BUTTON when sliding bottom power switch and release it when enter to bootloader.
****************************************************************
[HOW TO] dump your ROM.
****************************************************************
This is how to dump your original ROM part00.raw, part01.raw and part02.raw files for future use.
These are guidelines and the addresses in blue from your own device must be used in the commands instead of those in the example.
1. Get the itsutils from here: http://forum.xda-developers.com/wiki/index.php?title=XdaUtils
... and unpack in your desire disc (C:\itsutils, D:\itsutils, etc.)
2. Connect your device to a PC/Laptop, sync and on your PC/Laptop run a command line or shortcut and issue the following commands:
2.1 First command:
C:\itsutils>pdocread -l
[Tap on yes, if asked to accept running the dll.]
*********************
On your screen you will see:
*********************
Copying C:\itsutils\itsutils.dll to WCE:\windows\itsutils.dll
80.00M (0x5000000) SMFLASH
| 1.25M (0x13f000) Part00
| 1.75M (0x1c0000) Part01
| 45.50M (0x2d80000) Part02
| 31.50M (0x1f80000) Part03
1.82G (0x74900000) DSK2:
| 1.82G (0x748ff000) Part00
3.69G (0xec400000) DSK1:
| 3.69G (0xec000000) Part00
STRG handles:
handle#0 839a5546 3.69G (0xec000000)
handle#1 23f61dd6 1.82G (0x748ff000)
handle#2 a3f5b99a 31.50M (0x1f80000)
handle#3 c3f5b11a 45.50M (0x2d80000)
handle#4 23f5b0f6 1.75M (0x1c0000)
handle#5 a3f61fda 1.25M (0x13f000)
disk 839a5546
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 23f61dd6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a3f5b99a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c3f5b11a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 23f5b0f6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a3f61fda
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C:\itsutils>
*****************
2.2 2nd command:
C:\itsutils>pdocread -w -d SMFLASH -b 0x800 -p Part00 0 0x13f000 Part00.raw
*********************
On your screen you will see:
*********************
CopyTFFSToFile(0x0, 0x13f000, Part00.raw)
C:\itsutils>
*****************
2.3 3rd command:
C:\itsutils>pdocread -w -d SMFLASH -b 0x800 -p Part01 0 0x1c0000 Part01.raw
*****************
On your screen you will see:
*****************
CopyTFFSToFile(0x0, 0x1c0000, Part01.raw)
C:\itsutils>
*****************
2.4 4rth command:
C:\itsutils>pdocread -w -d SMFLASH -b 0x800 -p Part02 0 0x2d80000 Part02.raw
*****************
On your screen you will see:
*****************
CopyTFFSToFile(0x0, 0x2d80000, Part02.raw)
C:\itsutils>
*****************
Now you can upload your partxx.raw files and post your link to them
in order for the official rom to be constructed for future use by you and all other users.
Many thanks to pavlac and all ROM uploading members for your testing and reporting.
Regards, ansar.
Hi, I want You to help to cook some rom for P560
Yes, I was able to enter Boot Loader Menu by your suggestion.
pavlac
pavlac said:
Hi, I want You to help to cook some rom for P560
Yes, I was able to enter Boot Loader Menu by your suggestion.
pavlac
Click to expand...
Click to collapse
Hi pavlac,
This is outstanding news for P560 and hope for P360 too!!
I will prepare the WWE WM6 5.2 17945 Build 17945.0.3.2 just for testing/archiving purposes.
This version will be used after flashing a WM6.1 / WM6.5 ROM and one wants to send the device for service.
In order to proceed it is very important to describe the screen (s) of the menu:
1. Describe exactly of what you see (or make a photo in .jpg format) of the main menu and
2. Describe each one of the submenus, if any, regarding ce image upgrade.
You can also send me a private info post by clicking on name above my avatar, if you like to do so.
Regards, ansar.
Mio P560 Boot Loader Main Menu & Submenus:
Hi pavlac,
Your contribution to P360/P560 ROM development is unparallel.
I will prepare the WWE WM6 CE OS 5.2.17945 Build 17945.0.3.2 first.
If your device has a different one, before flashing a new ROM you must dump your own ROM first.
For details see #1 post.
If you have any difficulty just let me know.
The ROM that will be prepared it will be flashed as a CE image, no change to UBOOT and MS_IPL, and so will be absolutely safe.
Stay tuned and Best Regards, ansar.
Hi ansar.
I have tried to get the bootloader mode on the p560, but no succes
Any other ideas ?
Taurus1ax said:
Hi ansar.
I have tried to get the bootloader mode on the p560, but no succes
Any other ideas ?
Click to expand...
Click to collapse
Hi,
Can you describe (exactly, not i did follow the instructions) in detail how did try to enter bootloader?
See also Important Note in #1 post.
Regards, ansar.
The method described in the first post doesn't work (for Mio P360). Holding the top power button and setting the bottom switch to "ON" does nothing other than booting into WM normally. I also tried the P350 method (holding the joystick "DOWN" and switching the PDA on) and it booted into WM safe mode.
Also, pavlac's screenshots in post #4 seem to be from Mio P350, not P360 (see the CHUB350_UT_R09_0911_2G header in the first attachment).
I'm also interested in backing up/upgrading P360's ROM if anyone can help I'd appreciate it!
Hi,
All Mio P350/P550 report OSCAR at main uboot screen.
Try a variation to press and HOLD the top [+] button and slide the bottom switch to OFF.
Keep holding down the top [+] and slide the bottom switch to ON.
Do not release top [+] up to enter uboot.
Regards, ansar.
None of these work
I have tried many variations of button pressing and nothing brings up the boot menu.
Anyway, thanks for your time, if I find anything I'll post it!
Hi.
I found something on polish pda forum. Try this:
Bottom switch OFF, hold JOYSTICK RIGHT + press and hold RIGHT BUTTON, keep holding both and then slide bottom switch to ON.
On my P560 it dosen't work, but I hope Yours will be OK.
pavlac said:
Hi.
I found something on polish pda forum. Try this:
Bottom switch OFF, hold JOYSTICK RIGHT + press and hold RIGHT BUTTON, keep holding both and then slide bottom switch to ON.
On my P560 it dosen't work, but I hope Yours will be OK.
Click to expand...
Click to collapse
OKAY that did it!
Different procedure for such similar devices is strange though...
And the boot screens are similar to those you have posted in the previous page, my header is CHUB350_UT_R12_1105_512M. I have a Greek ROM, if you are interested, I will back it up and post the link here (as long as the admins verify my account and let me post external links).
Regards!!
Working for me too (mio P360),
french ROM, header is CHUB350_UT_R12_1105_512M too
My P560 dumped ROM
That's great that it works!
They say that devices with updated ROM have different combination than others devices, with older ROM.
Boot loader header: CHUB350_UT_R09_0911_2G
UT Checksum =0x419D4CD
OS Chksum=0x20D7507
CPLD_32 usercode=EF777E77
CPLD_64 usercode=***FAIL!***
Nand Tools = need soft reset
Code:
www_sukcesnet_com/~pavlac2/Mio_P560_CHUB350_UT_R09_0911_2G.zip
Sorry, but I don't know witch distribution I have. How to find out? I tried to search what WWE/ELL/FRE means but no success.
pavlac said:
That's great that it works!
They say that devices with updated ROM have different combination than others devices, with older ROM.
Click to expand...
Click to collapse
Hi,
The #1 post is updated, many Thanks for your contribution to this.
New Official/Custom ROMs are on the way.
Regards, ansar.
dump completed
Here is the dump
www_dot_nospaceleft_dot_com/raw.zip
Here is the logfile :
--------------------------------------------------------------------------
Code:
C:\itsutils>pdocread.exe -l
Copying C:\itsutils\itsutils.dll to WCE:\windows\itsutils.dll
80.00M (0x5000000) SMFLASH
| 1.25M (0x13f000) Part00
| 1.75M (0x1c0000) Part01
| 45.25M (0x2d40000) Part02
| 31.75M (0x1fc0000) Part03
396.00M (0x18c00000) DSK2:
| 396.00M (0x18bff000) Part00
14.94G (0x3bc000000) DSK1:
| 14.93G (0x3bbc00000) Part00
STRG handles:
handle#0 835ef906 14.93G (0x3bbc00000)
handle#1 43f61dd6 396.00M (0x18bff000)
handle#2 43f5b99a 31.75M (0x1fc0000)
handle#3 c3f5b11a 45.25M (0x2d40000)
handle#4 e3f5b0f6 1.75M (0x1c0000)
handle#5 e3f61fda 1.25M (0x13f000)
disk 835ef906
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 43f61dd6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 43f5b99a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c3f5b11a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk e3f5b0f6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk e3f61fda
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C:\itsutils>pdocread -w -d SMFLASH -b 0x800 -p Part00 0 0x13f000 Part00.raw
CopyTFFSToFile(0x0, 0x13f000, Part00.raw)
C:\itsutils>
C:\itsutils>pdocread -w -d SMFLASH -b 0x800 -p Part01 0 0x1c0000 Part01.raw
CopyTFFSToFile(0x0, 0x1c0000, Part01.raw)
C:\itsutils>
C:\itsutils>pdocread -w -d SMFLASH -b 0x800 -p Part02 0 0x2d40000 Part02.raw
CopyTFFSToFile(0x0, 0x2d40000, Part02.raw)
C:\itsutils>
mumux said:
Here is the dump
www_dot_nospaceleft_dot_com/raw.zip
Click to expand...
Click to collapse
Salut,
Merci pour la distribution Française!
Regards, ansar.
Here is the ELL ROM dump from Mio P360 :
Boot Header = CHUB350_UT_R12_1105_512M
UT Checksum = 0x41B9AAD
OS Checksum = 0xFB95D345
CPLD_32 User Code = 0000B5C9
CPLD_64 User Code = *** FAIL! *** (WTF?)
Code:
hxxp://rapidshare.com/files/418212081/Mio_P360_ELL_ROM_dump.zip.html
And the log file :
Code:
E:\= NEW =\= Mio P360 =\= ROM Development =\itsutilsbin-20091117>pdocread -l
Copying E:\= NEW =\= Mio P360 =\= ROM Development =\itsutilsbin-20091117\itsutils.dll to WCE:\windows\itsutils.dll
80.00M (0x5000000) SMFLASH
| 1.25M (0x13f000) Part00
| 1.75M (0x1c0000) Part01
| 44.25M (0x2c40000) Part02
| 32.75M (0x20c0000) Part03
396.00M (0x18c00000) DSK2:
| 396.00M (0x18bff000) Part00
1.86G (0x77580000) DSK1:
| 1.86G (0x7756fe00) Part00
STRG handles:
handle#0 23f68fd6 1.86G (0x7756fe00)
handle#1 23f61dd6 396.00M (0x18bff000)
handle#2 63f5b99a 32.75M (0x20c0000)
handle#3 e3f5b11a 44.25M (0x2c40000)
handle#4 03f5b0f6 1.75M (0x1c0000)
handle#5 c3f61fda 1.25M (0x13f000)
disk 23f68fd6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 23f61dd6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 63f5b99a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk e3f5b11a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 03f5b0f6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c3f61fda
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E:\= NEW =\= Mio P360 =\= ROM Development =\itsutilsbin-20091117>pdocread -w -d SMFLASH -b 0x800 -p Part00 0 0x13f000 Part00.raw
CopyTFFSToFile(0x0, 0x13f000, Part00.raw)
E:\= NEW =\= Mio P360 =\= ROM Development =\itsutilsbin-20091117>pdocread -w -d SMFLASH -b 0x800 -p Part01 0 0x1c0000 Part01.raw
CopyTFFSToFile(0x0, 0x1c0000, Part01.raw)
E:\= NEW =\= Mio P360 =\= ROM Development =\itsutilsbin-20091117>pdocread -w -d SMFLASH -b 0x800 -p Part02 0 0x2c40000 Part02.raw
CopyTFFSToFile(0x0, 0x2c40000, Part02.raw)
I would like to propose some additions to the guide on the first post :
1) For Mio P360, the navigation in the boot menu is done with the joystick, but the selection (ENTER) of each item is done with the right button, not by pressing the joystick.
2) The device must be connected to the computer and synchronized to WMDC/ActiveSync in order to dump the ROM.
3) There is a security prompt to accept the run of itsutils.dll by the device, it should be accepted.
4) The HEX addresses that the ROM parts reside on ARE NOT THE SAME in every device (maybe they are the same for same devices), so after the first command pdocread -l the addresses should be noted for use in the next steps.
For my device (Mio P360 ELL ROM), part02 of the ROM was in address 0x2c40000 and not 0x2d80000 as ansar's (this happens in mumux's device as well as I see).
So the commands must be :
pdocread -w -d SMFLASH -b 0x800 -p Partxx 0 <HEX address of Partxx as seen in the first command> Partxx.raw
Also I want to note that reading of CPLD_64 User Code FAILED (!!) and that when tried to enter the NAND Tools menu, my device froze and I had to soft reset it. Any answers why these happen could come handy.
Cheers
Candlemass said:
Here is the ELL ROM dump from Mio P360 :
UT Checksum = 0x41B9AAD
OS Checksum = 0xFB95D345
CPLD_32 User Code = 0000B5C9
CPLD_64 User Code = *** FAIL! *** (WTF?)
Click to expand...
Click to collapse
Hi,
The #1 post is updated, please include your boot loader header i.e. CHUD_350_UT_Rxx_yyyy_512M.
It seems that CPLD_32 and CPLD_64 [Complex Programmable Logic Device] are used to distinguish
the logic capacity of the two-input NAND gates for each implementation [P360 or P560].
So do not worry about it, each device must access its own NAND memory size.
Thanks for the ELL P360 distribution and commenting and supporting.
Regards, ansar.
ansar.ath.gr said:
Hi,
The #1 post is updated, please include your boot loader header i.e. CHUD_350_UT_Rxx_yyyy_512M.
Click to expand...
Click to collapse
Ok done, I edited my post above.