I'm trying to track down some of the ram chips the Infineon HYB18L256160bf-7.5 they are an obsolite component now, so if any one knows where I can source these ICs for that would be great. I have the equipment and skills to fit BGA's, I actually run couses on it, so if I can get a reliable source for these ICs I maybe able to offer an upgrade service.
Hi, there appears to be a couple of threads on this topic: Htc Universal Memory Upgrade. and 128 Mb RAM on Universal
It appears a company called Retronex has been used for supply and soldering, but WizP mentions a company called Xel in his post found here.
Their website is http://www.xel.co.uk/
Hope this helps, and let me know if you are going to upgrade Uni's as I'm looking to do this.
Thanks for the info, I had almost given up on sourcing the memory within the UK. I have contacted the guys at Xel and they have be very helpful. They have a good stock of these chips and I have ordered and recivered 2 of them.
My plan is to get some time next week to strip out the MBD from my Uni and rework the BGAs. I'll keep all those who are interested posted of my progress. Once I have done this I will also be able to let you know if I can offer this as a service.
D.Apsley said:
Once I have done this I will also be able to let you know if I can offer this as a service.
Click to expand...
Click to collapse
If you are successful, then you have a customer right here, if you want one that is PM me if you decide to offer this.
me too, veeeerrrryyyyy interested.....
D.Apsley said:
Once I have done this I will also be able to let you know if I can offer this as a service.
Click to expand...
Click to collapse
In case everything goes as planned, and you decide to accept international orders (specificaly from Brazil), please let me know.
Thanks in advance.
Cheers!
Carlos
Hi to everyone and happy monday
I would like to update my JasJar to but... where can I find the required 128Mb expansion?
Cheers
Good morning to all,
For all of you wacthing this thread wanting to know how I have got on with the 128Mb upgade to my Uni. It is good news I now have a 128Mb Uni , not without a few tense moments though. I got the 2 old M-RAM chips off with no problems, but when reaplacing them with thew new ones a couple of solder balls didn't go down right on one of them. So I had to remove it, re-ball it, and replace it. Luckly it all went well the second time.
The second tense moment was after I re-assembled my Uni. It was doing a good impression of a brick , however this turned out to be just a flat battery.
So once changed I switched it on it booted up and is now showing 128Mb of RAM. I haven't noticed any great jump in app loading speed yet, I may need to tweak something in the ROM not sure yet (using WM6.1 RAN V7.6).
I'll keep you posted, on stablitiy.
Watch this space, upgrade servise coming soon.
Well done D.Apsley - you may want to look for ROM's with no page-pool. See here for Ranju's http://forum.xda-developers.com/showthread.php?t=367448&page=129#post2154517
I am not sure of a huge speed increase, but it would mean for me that I could run my GPS software without having to clear out all programs fom memory (usually need's a reboot before starting the software).
Re Upgrading to 128mb. help !!!!!!
i've had a phone conversation with people from Retronix. they can do it they even can provide parts. but i've got one big problem. i'm not british and got big problem to understand scottish accent / or language. so if i could ask anybody from this forum to contact them and ask all detiles and then post it here. tel no to Retronix 01236433345 ext 310. thank you for help rgds. Seb.
Results of 128Mb upgrade
Well i've been runing my Exec with the 128Mb for a week now and all is well. I have not noticed a massive change in speed, but I'm now able to run several app's at once without any system slow down or out of memory compliants.
I'm now going to offer this service to other members, but I need to work out the logistics of it. Namely costs and type of service, meaning Full Service, all parts supplied just send Exec and payment, returned when done, or Rework Service parts not supplied, send Exec, parts and payment, returned when done.
Will do screen repairs if I can source LCD and/or Digitiser.
Also looking at repalcement srevice for Metal LCD Cover plate. Has any tried to remove one.
Hi D.Apsley
I want to upgrade my Qtek9000 by my self I already order the chips and I have the ability to replace BJA components, also I have the HTC Service Manual if you want I can upload it.
As I know the only thing I should do, is replace the two BJA's and solder one 30Ohm resistor, please let me know if I need to do anything else.
Also I can get you the place that I ordered the chips maybe you can buy from them also.
Qtek9000
ROM: Ranju's -7.4
Radio: 1.17.00
ExtROM: 2.07.40
Bootloader: 1.01 (G3)
Adata 16G SDCH C6
Great news!
D.Apsley said:
Well i've been runing my Exec with the 128Mb for a week now and all is well. I have not noticed a massive change in speed, but I'm now able to run several app's at once without any system slow down or out of memory compliants.
I'm now going to offer this service to other members, but I need to work out the logistics of it. Namely costs and type of service, meaning Full Service, all parts supplied just send Exec and payment, returned when done, or Rework Service parts not supplied, send Exec, parts and payment, returned when done.
Will do screen repairs if I can source LCD and/or Digitiser.
Also looking at repalcement srevice for Metal LCD Cover plate. Has any tried to remove one.
Click to expand...
Click to collapse
That is great news!
Now some questions:
1. Will you accept customers from sweden, and if so what will the price tag be at?
2. Do you think it is possible to uppgrade to perhaps 256 MB instead of 128?
(That would be even better)
3. Do you give any warrant on your work, for instance, if I send you my device for an uppgrade and you accidentaly brick the device! What happens then?
Thanks in advance!
1) He hasn't figures out a price for the UK yet - so obviously not for 'foreign' customers.
2) We know 128 is the max.
3) We know the guy is doing because he can - not as a business - so how do you suggest he could offer a warranty?
Hi All,
If someone wants to buy the chips I have two places that you can get them, both of them have the chips on stock and are very nice guys.
1. Mail : [email protected] his name is John. Company web site http://www.hkyixin.net. The chips price is 8$ for etch chip he accept PayPal and he send it buy UPS you should ask for the delivery cost.
2. Mail : [email protected] his name is Lois. Company web site www.aaahkelec.com. The chips price is 6.3$ for etch chip he accept only Western Union should ask for the delivery cost.
I'm already ordered the chips and I'm going to get them on Monday next week. If you have any question regards this I'll be happy to help.
Qtek9000
ROM: Ranju's -7.4
Radio: 1.17.00
ExtROM: 2.07.40
Bootloader: 1.01 (G3)
Adata 16G SDCH C6
Memory upgrade service available
I will offer an upgrade service to all those who are interested, I can provide the chips as well if required. I will be asking £50 (GBP) for labour and equipment use + return shipping costs. The chips are available for £18 each + shipping, from Xel Electronics Ltd., now I don't mind ordering the chips for you, at cost. I'm offering this as a service not as a business, so I cannot provide any form of warranty and there is a risk of permanent damage to the Uni. I thought I had bricked mine at first, it turned out to be a flat battery. This hardware is delicate. For anyone outside the UK I’m happy to do the work, but we will have to sort out the Shipping and payment on an individual basis, probably best to PM. As I will doing this at work after my actual job I cannot guarantee a fast turnaround.
I will do other types of repairs, LCD Screens, Digitisers, Keyboards, Case swaps. This is because I have the tools to do the work.
I should mention I have found somewhere at claims to have Genuine replacement housing in both Black (£42.95) and Silver (£39.95) go to http://www.mobilefun.co.uk
DIY instructions anyone?
Is it worth my while posting DIY instructions for the memory upgrade, it might give you nightmares once you see what is involved and the cost of the equipment.
D.Apsley said:
Is it worth my while posting DIY instructions for the memory upgrade, it might give you nightmares once you see what is involved and the cost of the equipment.
Click to expand...
Click to collapse
Hi,
I know exactly what is involve with the memory replacement and I already have the chips, I'm going to do the upgrade soon, please confirm that I should replace the two BGA ram's and add one 30 Ohm resistor. I have an automatic BGA replacement machine at work.
Thanks,
Qtek9000
ROM: Ranju's -7.4
Radio: 1.17.00
ExtROM: 2.07.40
Bootloader: 1.01 (G3)
Adata 16G SDCH C6
I just followed the instructions give on the 'Upgrading the Ram on your Universal to 128 MB' link on the HTC Universal wiki page here in xda-developer.
But basically yes remove the 2 x 32Mb M-Ram BGAs, Clean the pads, replace with the 2 x 64Mb M-Ram and solder a wire link across the 0402 pads. I've not come across the 30 Ohm resistor mentioned in any of the instruction, but shorting the two pads works.
Oh by the way there is a small battery on the underside the MBD near the M-Ram BGAs watch out you don't damage it.
Thanks for the tip's.
Qtek9000
ROM: Ranju's -7.4
Radio: 1.17.00
ExtROM: 2.07.40
Bootloader: 1.01 (G3)
Adata 16G SDCH C6
Related
Hi...
Don't know if I'm allowed, so if not: admin can remove my post, no prob...
I am looking for a BlueAngel device for testing with Linux installation etc...
Device may be in (heavily) used state, battery time more than 2 minutes is not necessary.
What need to be ok is: screen, touchscreen, keyboard, gsm radio...
Anyone want to sell an old (double) device for a small price, let me know!
Thanks!
Moved the thread out of WM6. See no problem with this request.
i have one for sale if you are interested. it is actually a double since i bought a new one.
bkortleven said:
Hi...
Don't know if I'm allowed, so if not: admin can remove my post, no prob...
I am looking for a BlueAngel device for testing with Linux installation etc...
Device may be in (heavily) used state, battery time more than 2 minutes is not necessary.
What need to be ok is: screen, touchscreen, keyboard, gsm radio...
Anyone want to sell an old (double) device for a small price, let me know!
Thanks!
Click to expand...
Click to collapse
i want to sell
PM me if you have one for sale...
Let me know how much you want for it, what state it is in and where you live...
Thanks guys!
FS: Blue Angel
I have one for sale. It's branded T-Mobile MDA. The bluetooth function is not working but everything else is good, including battery. Very small nicks, and no scratches on screen (that I can see).
Currently running a stock T-Mobile UK 1.42 shipped ROM. I also tested it on WM6 and it ran it too but I went back to 2003SE.
Comes w/ USB + serial 2-in-1 cable (charging via USB or the DC jack on the cable).
Also comes w/ a cigarette lighter charger (third party).
I'm in Vancouver, Canada. Will ship out of country.
$175. + shipping.
[I do not have the docking station, nor the AC charger, or other except as listed above.]
Hi Buddy,
Let me know if u still need it. I have the Blue Angel with me with updated Windows 2006 and 1GB expanded memory as well. Please let me know if you are interested in buying. I can ship the same to you either from US or from India.
In the meantime, there's one coming to belgium from one of our US friends
Many thanks, and let's hope you get yours sold real soon...
Maybe an idea for a fixed post, or even a seperate topic?
Thanks again all for your quick responses
Bram
premkkumaar said:
I have the Blue Angel with me with updated Windows 2006 and 1GB expanded memory as well.
Click to expand...
Click to collapse
1 gig? Are you talking about a gig of memory on board, or via a SD card?
if it's onboard, how the heck was that done?
Hi guys, i have 2 Blueangels, in fact orange M2000's.
Both work but the first one doesnt get a signal in the UK as it was blocked when i lost it.
The second one was the insurance replacement.
Both are good condition, by memory the newer one probly has WM6 or something installed on it, i think the older one has 2003 still. Cant remember. I can check.
I have 1 cradle between them, and 3 batteries.
I always planned on just holding on to them, but i never use them. I just cant find the time to keep up with all the individual forums for all my phones. I also have the following phones that i dont really use if anyone is interested
2 Blueangels (obviously)
1 Universal
2 Tytn
1 Trinity
1 Treo 750
1 Kaiser
1 I780
I am open to offers on all of these but the more recent ones i might not sell. Anyone wants any give me a shout.
Cheers
Rob
I'm from VietNam, How to buy ?
I will take in the usa. how much for shipping and phone ? are they unlocked? ill give 300
please email me at [email protected] if intrested.
Hi guys, thanks for the replies. The I780 and the Kaiser i may be holding on to for a bit. The others i will sell if people want them for the right money.
I would also prefer to sell the phones individually as well, sorry should have made that more clear. The blueangels could go together though as i only have one charger and such like.
Shipping abroad, hmm, that is a good question. I must confess i hadnt really thought this through. I could ship abroad but i would have thought by the time the shipping was added on then it might not be worth it.
Anyone want any of these as individual items ? especially the Blueangels, i may put some posts in the other device forums about the others as well.
I will look into shipping costs.
Hey guys. I have gotten alot from this website so I would like to give back. I own and operate a mobile phone repair shop and would like to extend my services to this forum. Most of you seem pretty techical so even if you just want the part (microphone, ear speaker, Loud speaker, LCD) I will provide it for you at a low cost plus shipping of course. I mostly deal with hardware issues so please don't PM me or post asking about software, I am a total noob when it comes to that!
Thanks again to all the rom builders and contributers who have helped make my phone awsome!
If you can source the vibrate motor for an HTC S710 I would be forever grateful. Where abouts are you located?
EDIT: I see you're in Phoenix.
Most of the parts I carry are for US released HTC phones but often they carry simular parts. If you can post a picture of what it looks like I'll see if I have a match.
I will upload a picture in a little bit, however here are the specifications from the HTC Vox Service Manual for the motor;
JT0406-30CSR1, JNTECH, Cylindrical, 3V, 100mA, 12000+/-3000 rpm, 60/-, 20degC, 11.2*5.1*5.8mm
The cylinder has J7D05 printed on it and has 2 prongs that make contact to the pad on the PCB. I've tried many different other motors but none of them physically fit in the spot. So if you have any motor rated to those specs and is smaller or equal to the dimensions above, I will take it.
Here are two pictures of it. They are quite large, so not inlined. Not my camera, one of those funky digital ones that I have no idea how to adjust the focus on.
http://i25.tinypic.com/20psxg3.jpg
http://i25.tinypic.com/22dcb4.jpg
I'll check my inventory tomorrow. The shop is closed for today, it being the 4th of July and all.
Ah yes. Thanks, I shall await your response in great excitement.
Happy Indie Day!
A friend of mine has an O2 XDA Orbit but the usb works for charging but not for the data link.
Is this fixable? and if so, do you perform the fixes !!!!
@pna
I had the same problem with my Dash/Excalibur. I had to turn off the USB charging feature in the settings and then the data worked fine. I just either turn it back on if I need to charge via USB on my PC and don't have a wall charger handy. Tell your friend to try that.
Edit:
Also Turn off Advanced Network Functionality to along with charging over USB.
pna said:
A friend of mine has an O2 XDA Orbit but the usb works for charging but not for the data link.
Is this fixable? and if so, do you perform the fixes !!!!
Click to expand...
Click to collapse
If the pins in the socket look straight re-flow the solder on the mainboard or get someone to do it. It's fairly easy. New sockets are about $4 on fleabay but as there are multiple lines close together you do need skill to replace.
M.S
@h4waii
Sorry friend. I don't have one that looks like that by HTC. However the T-Mobile Sidekick 3 vibrator does look like it. If I had it here to test I would be able to look closer. Once again, sorry friend.
Planetneo said:
@h4waii
Sorry friend. I don't have one that looks like that by HTC. However the T-Mobile Sidekick 3 vibrator does look like it. If I had it here to test I would be able to look closer. Once again, sorry friend.
Click to expand...
Click to collapse
I do, however, stock them. pm me and I'll list it on eBay.I'm in the UK though so shipping will be dependant on where you are. Outside UK is £7.
M.S
Good, this is the point right? To help our fellow members. Thanks Mysterious Stranger.
Planetneo said:
Good, this is the point right? To help our fellow members. Thanks Mysterious Stranger.
Click to expand...
Click to collapse
Help if asked, yes. Spam to get sales, NO.
M.S
Anyway you can check out my thread here...http://forum.xda-developers.com/showthread.php?t=405758
Might find it intresting.
htc touch cruise
One of the give aways in buying this product is CoPilot Live 7 with free city map. I choose Muscat in Oman in English but I can not activate it. I went to the dealer but he wants me to pay to activate it.
Planetneo said:
Hey guys. I have gotten alot from this website so I would like to give back. I own and operate a mobile phone repair shop and would like to extend my services to this forum. Most of you seem pretty techical so even if you just want the part (microphone, ear speaker, Loud speaker, LCD) I will provide it for you at a low cost plus shipping of course. I mostly deal with hardware issues so please don't PM me or post asking about software, I am a total noob when it comes to that!
Thanks again to all the rom builders and contributers who have helped make my phone awsome!
Click to expand...
Click to collapse
Right on! I have been wanting to replace the metal bezel that goes around the front of the AT&T 8525 (U.S. HTC Hemes). Mine has gotten quite scratched and scuffed over the last year, and I would love to have it returned to it's original clean, shiny look.
Do you happen to carry this part by any chance? Or know of an affordable place to obtain one?
I get mine from a guy on ebay. I used my last 3 over the holiday weekend so I am out till I order some more on Monday. They are about $28 shipped. Link below....
http://cgi.ebay.com/HTC-Hermes-Cing...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Planetneo said:
I get mine from a guy on ebay. I used my last 3 over the holiday weekend so I am out till I order some more on Monday. They are about $28 shipped. Link below....
http://cgi.ebay.com/HTC-Hermes-Cing...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
If you need the full housing email Amit / Raki Computers and ask - they have them as well at not much more $ ( about $26 IIRC) if you ask although the parts they sell are used / stripped from BER phones so some have minor marks and it's pot luck.
M.S
edit - I emailed Amit @ Raki myself anyway and he's listed the full housings here: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220254094906
better value IMO.
Yes. We've got software support and now hardware support. This thread needs to be stickied.
Hey all.
Just thought I'd post my experience here.
After owning my uni for a few years, I thought it was about time to give it a make over.
My main annoyance was the hinge pieces / spine where the paint had chipped off. I tried touch up pen........ looked worse.
Googled and ebayed but all I could find was housings only.
Eventually I just took the paint off and, after several applications of Autosol.....WOW! Shines like a mirror! I'm shocked that no one i here has tried this.
Next task is to use the old housing's exterior metal branding as a template and put a chrome piece in the new cover (on the spv m5000 housing)
I'll post some pics as it progresses.
please do, sounds great. what is Autosol?
That sounds interesting! Can't wait for results. Please keep us posted.
That sounds interesting! Can't wait for results. Please keep us posted.
Autosol is metal polish in a tube. Really good stuff.
I'm sending the phone of for the 128mb upgrade before renewing / modding the housing.
Decided on aluminium for the outer branding and found a guy to machine it.
Any of you guys know if you can get silver buttons (camera, volume etc) for the uni or will I have to get them plated?
I too can personally vouch for how good Autosol is ;-) its about £5 or so from Halfords iirc
BTW karl where have you sent your phone off to to get the 128mb upgrade done? And for how much can i ask?
Cheers
I've been contacting a guy called Joe at retronix uk ltd.
Very helpful he's been.
He quoted £80.00 to do it. They want the entire phone (not just the board) and the charger. They also want a 128mb rom loaded on so they can test it once it's upgraded.
Payment is going to be by debit card.
Hope that's enough info for you.
I dont suppose anyone has an mda pro keyboard and toggle button (one next to the screen) spare / for sale?
Ordered the housing of fleebay but without the above.
Cheers all
karlbarclay said:
[...]Joe at retronix uk ltd. [...]
Click to expand...
Click to collapse
I'm interested in the upgrade, and would like to know something more about the shipping options... do I have to contact them directly or PM you, or whatever?
regards
I think it's better to contact directly.
No harm in it.
(sorry for the little OT)
I'm in contact with the Italian partner of Retronix, trying to get an affordable price to get the upgrade done. If someone else from Italy is interested can contact me, chances are that we can get discounts for quantity...
sorry again for the OT,
cheers to all
Has anyone actually used Retronix Uk yet?
How did you get on?
Mav
Tried the chrome thing on da hinges a year away. the main problem is dat it needs attention every month. mine got yellowish in a month. also try touchin the hinges while the phone is on charge. ull feel electrified a bit...lolzzz.
Hey guy's:
Due to the high demand of memory for upcomming OS's I thought I would give you an opportunity to upgrade the memory of your Uni. As you know, one of my friends did the upgrade for me here (in Bangladesh). I discussed with him personally last night for his service and he has shown some interest.
Now I need to know spending how much is actually worth/comfortable for you. I'll then discuss with him further. But please note, chip has to be ordered/bought from eBay.
Let me know if your are interested.
UPDATE:
Details for upgrade -
UPGRADE COST: USD 100 - included chips+service charge+return shipping (regular post).
UPGRADE COST: USD 110 - included chips+service charge+return shipping (express post). But Express post service is available for limited number of countries.
You can provide the chips if you want but they have to proven working. 20$ will be deducted from the total cost in this case.
You must bear the cost for shipping from your end.
Complete device is not accepted. You need to unmount the device and send ONLY the mainboard without any other assembly.
The mainboard must be well-packed during shipping. The same packaging may be used for return shipping.
The whole process could take approximately 6-8 weeks (including shipping/upgrade/return shipping).
I will not take the responsibility in case the board is damaged or lost during transit.
Due to export control regulation: some of the countries are considered out of this project. i.e. Singapore, Malaysia, Indonesia and all other countries those has direct border to Singapore. Italy has no usual restriction but the postal handling is not so pleasant. Parcel may get lost during shipping/return shipping so it is up to your interest.
Payment (PayPal is prefered) has to be made only when you get notified that the upgrade is done. Board will be then re-shipped.
PM me if you're interested and I'll then provide you the shipping address.
Cheers
I am interested!!
Not sure about price but in London you have to pay aprox. 50 - 80 pounds.
How this would work? shipping?
I´m in and waiting further instructions!
Universal 128MB upgrade in London
Can you tell me somewhere that'll do the upgrade in London? I can't find ANYWHERE! Many thanks
@orb:
you need to send your mainboard, not the whole unit.
the board will be returned after upgrade. in this way it will help to avoid tax.
We will discuss about all other concerns but first I need to know the interest from you guys.
I am interested. Can afford $50, I guess.
Your friend could also do USB port repairs, seems to be the problem that far too many Unis and their owners suffer from.
Question: Can chips be harvested off a defunct Uni/Wizard board? I have some lying around gathering dust in various states of disrepair or repair is simply uneconomical, but I know the RAM BGA chips are fine. Can give chips as part of payment... perhaps...
What do they cost on eBay?
enigma1nz said:
I am interested. Can afford $50, I guess.
Your friend could also do USB port repairs, seems to be the problem that far too many Unis and their owners suffer from.
Question: Can chips be harvested off a defunct Uni/Wizard board? I have some lying around gathering dust in various states of disrepair or repair is simply uneconomical, but I know the RAM BGA chips are fine. Can give chips as part of payment... perhaps...
What do they cost on eBay?
Click to expand...
Click to collapse
Consider it is not a commercial service. He will do it because of my request. But in the other way, we need to pay him something or he will not feel the interest. Also there is a cost involved for returned shipping.
P.S: I just checked at eBay, a pair of chips are about 20$ (including shipping).
regards
I am interested. Can afford $50, I guess.
Your friend could also do USB port repairs, seems to be the problem that far too many Unis and their owners suffer from.
Question: Can chips be harvested off a defunct Uni/Wizard board? I have some lying around gathering dust in various states of disrepair or repair is simply uneconomical, but I know the RAM BGA chips are fine. Can give chips as part of payment... perhaps...
What do they cost on eBay?
It cost about 200RMB in China,
But I am still waiting~
yes mate there we are i am from dhaka and i am very much interested 4 the upgrade.i think i pm u about this.it will be very much appricated if u provide some of ur contact info 4 ur country mates..cheers tomal 4 ur hard work...i will look 4word 4 the reply...
sorry i forgot to ask is there any possibolity to upgrade the ram to 256 or more higher.i mean can we use 2 128 chip or something like that..cheers..
Very Interested
Not sure the exact amount I would spend currently. Maybe we need to figure out how much it is for return shipping then go from there as far as payment. Most of the users are closer to you I would assume than I. But Im definately interested in this idea. Is there a way to get a flat rate shipping from your end to the rest of us throughout the world? Something similar to what the USPS is offering now with certain boxes that weigh under 70 pounds. Hopefully so but you can count me in. Also would be hoping you and your friend could offer the broken USB port repair.
Also BIG THANKS for the great roms and support you have provided to us Uni lovers We ask you keep up the awesome work.
Upgrade!
I would be willing to pay $75.0-$100.00 US dollars, but not sure how long I could go with out my phone.
Jerry
tomal mate try to find those chips everywhere but couldnt find it.i tried ebay.co.uk couse i hade relative down there who can bring it 4 me.i tried ebay.com aswell but no solution..will u kind enough to show me those links where to buy..cheers...
tomal said:
@orb:
you need to send your mainboard, not the whole unit.
the board will be returned after upgrade. in this way it will help to avoid tax.
We will discuss about all other concerns but first I need to know the interest from you guys.
Click to expand...
Click to collapse
Ok, I will have to learn how to take out the mainboard in order to send it.
As you mentioned, let´s hear the other interests
Thanks mate!
HI master tomal i'm also in.........
Seems to be about £80 in UK (Retronex) + shipping
-Jonny- said:
Seems to be about £80 in UK (Retronex) + shipping
Click to expand...
Click to collapse
could u please show us the link of where to buy at (Retronex) as the page is too big to find.
this is a bit off topic, as I am aware Tomal was asking for interest. However, as this is a share site, I'll just point you off-topic to this post.
mate what about those empty space beside the ram chip.if that is 4 extra flash disk than any chance to upgrade it i mean are those chips avilable in market like increaseing more f disk in main board like ram ........any suggations.....
For me Hong Kong seems to be the only and thew closest option with $128. So if Tomal's idea fails, I might check with them whether they'll accept the board only and wait for FX to improve.