Related
Hi All,
Is there any way that i can get the names and the numbers to display as i hit the keys in the dialer?[Currently only the names are shown]
The earlier Jasjam rom there was an option to have the names and numbers to show up as you type.
Many thanks for you help with this,
G
My current version: 2007-05-07 RUU_Hermes_WWE_3.30.0.9 [LVSW Edition]
normaly is should show you the neames and below one number for the contact you want... when you scroll to your contact... with left / right pad you can scroll through the numbers for that contact...
Nope, Its only showing me the names but no numbers
Is there any option that i need to change to get this working?
Sounds like you need to reinstall the HTC smart dialer. Check the wiki under the cabs section (and elsewhere). Maybe that will fix what ails you.
WM6 Dialer Names+Numbers - Settings for Black.
This one has buggged me for a while also, however it's easy to fix.
Simply use "Pimp my Black" and enable the 3G Video Dialer. Click bling, soft rest and you now have the older smart dialer which shows names and #'s. It also allows you to use the scroll wheel to quickly access history and speed-dial.
I'm also running LVSW's ROM - ever since I installed the HTC Smart dialer 2.2 on the wiki cab page I can't find the option to enable the names/numbers on the main screen at all. It's just a blank space with the numpad.
With WM5, the softkeys were
Left softkey: New (text message)
Right softkey: Menu
after upgrading my Cingular 8525 to WM6 it is not that useful:
Left softkey: Delete
Right softkey: Menu
In effect, to create a new message I need to select Menu and then New.
Is it possible to assign New to the left softkey?
normanp said:
With WM5, the softkeys were
Left softkey: New (text message)
Right softkey: Menu
after upgrading my Cingular 8525 to WM6 it is not that useful:
Left softkey: Delete
Right softkey: Menu
In effect, to create a new message I need to select Menu and then New.
Is it possible to assign New to the left softkey?
Click to expand...
Click to collapse
Nope, not if your talking about in the messages screen. You can, however, set a soft key on the today screen to New SMS.
this has been a problem since the leak of WM6, search around, can't remember if theres a solution or not because it doesn't bother me that much, most of the time i'm replying to texts.
Take a look here, and here.
mcorrie1121 said:
Nope, not if your talking about in the messages screen. You can, however, set a soft key on the today screen to New SMS.
Click to expand...
Click to collapse
Thanks for a quick answer. I have no idea why Microsoft decided that the typical action when going to Text Messages would be to delete a message and not write a new message. You may store hundreds of messages without noticing a dent in the available memory.
How to create a shortcut from the Today screen to New SMS or reassining one of the softkeys to this function?
normanp said:
Thanks for a quick answer. I have no idea why Microsoft decided that the typical action when going to Text Messages would be to delete a message and not write a new message. You may store hundreds of messages without noticing a dent in the available memory.
How to create a shortcut from the Today screen to New SMS or reassining one of the softkeys to this function?
Click to expand...
Click to collapse
Use softkey changer (attached). If it gives you the error "missing file tnsms" then drop the attached corresponding file in ur /windows folder.
Kiitos Karhu and thanks mcorrie1121. I will test your solutions.
The SoftKey.cab from the link in Karhu's post is the only thing needed. One item on the list of commands to assign to a softkey on the Today screen is "New SMS". Works perfectly.
If you do not mind one more tap you can also use WM5 New Menu - provides more options than just new SMS.
Just found another problem with my TP2. I want to move some files to another location but I cannot select multiple files in File Explorer by draging the stylus to highlight them.
Is this behaviour by design or is there a bug on my device?
Shd be by default. Pls correct me if I am wrong.
I use resco for multiple file selections.
Simple.
[HKEY_CURRENT_USER\ControlPanel\Gestures\Touch]
"Disabled"=dword:1
It works! Thx Monx!
No problem. If the avatar is you, what about gimme a simple kiss. if it not u, pls dont. i'm not gay. but ur avatar is really cute . sorry off topic. just cant resist
(you know i'm kidding)
I also was looking for this solution.
And indeed, it works.
But it introduces another problem: To switch between your mail account, you can swipe from left to right.
But after this patch, that doesn't work anymore
So I've put the old setting back.
@ronh
can u give more details about email switch by swipe mate?
in manila or messaging app? mine is just fine. maybe there is some tmob customization.
monx® said:
@ronh
can u give more details about email switch by swipe mate?
in manila or messaging app? mine is just fine. maybe there is some tmob customization.
Click to expand...
Click to collapse
It's in the messaging app, not in manilla.
When you're in the messaging app, and you move your finger from left to right, it toggles between the configured mail accounts.
In mine TP2 for example: Outlook - Gmail - SMS (and then it starts over with Outlook.)
And although my provider is TMO, I have an unbranded Touch Pro2 WWE edition.
@ronh
Ok mate, got it, thanks (i always use navigation pad with raphael to do this)
Just for info, in wm6.5, we can swipe to switch between tab (iehone settings). So it cause a side effect in messaging.
ronh said:
It's in the messaging app, not in manilla.
When you're in the messaging app, and you move your finger from left to right, it toggles between the configured mail accounts.
In mine TP2 for example: Outlook - Gmail - SMS (and then it starts over with Outlook.)
And although my provider is TMO, I have an unbranded Touch Pro2 WWE edition.
Click to expand...
Click to collapse
Indeed, that's a problem.
The Xperia I had recognized if you are using the finger or the stylus. When using the finger the application scrolls and when using the stylus you can draw a frame to multiselect items.
Maybe that's possible with the TP2 too?
skycamefalling said:
Indeed, that's a problem.
Click to expand...
Click to collapse
Maybe it is related to OS build features or AKU changes.
Surely by disabling that reg key you're pretty much switching touchflo off?
So scrolling of anything in any WM apps (contacts, text messages, emails, calendar entries) will no longer work without using the scroll bar?
I just checked stock shipped Raphael (SEA 20764) OEMDrivers rgu, the value is set to 1 by default. And yes, messaging still scrollable to switch email account
I can still left< >right scroll between email accounts after this tweak.
Mesquire said:
I can still left< >right scroll between email accounts after this tweak.
Click to expand...
Click to collapse
after this tweak can you make a zoom to photos with stylus or rotate photos...????
You mean in photo albums? I have never been able to do either, even before the tweak.
I can double tap the image to enlarge it, or use the slider at the bottom of the screen to zoom in.
In any case, the inability to group files together in File Explorer is more of an issue for me than being able to rotate a photo (can always turn the phone 90 degrees instead), and the registry tweak has fixed that.
Very strange, just tried it again: With the patch --> no swiping, undoing the patch --> swipings works.
Too bad, I'd loved to have the best of 2 worlds like Mesquire...
(I guess she looks the TP2 lovely in his display )
Hi all,
The easy way to select multiple files in Explorer is the Windows way of selecting multpile files. Just press CRTL on your keyboard (you have one ) en select the files you want... It's Windows isn't it?
monx® said:
Simple.
[HKEY_CURRENT_USER\ControlPanel\Gestures\Touch]
"Disabled"=dword:1
Click to expand...
Click to collapse
so weird! My TP2 suddenly lost it even with this set to 1
already tried rebooting: still nada.
UPDATE:
on further investigation, I found I can select multiple files only in some folders, e.g., root directory of the storage card, My wallpapers, Templates, files and folders directly under My Device, Application Data, Program Files...
but not files directly under My Documents, whether under My Device or storage card
UPDATE #2
The only way to have the ability to select multiple files in any folder AND keep left< >right scroll to switch email accounts is to set the it to 1, but not reboot. If I reboot with it set to 1, it behaves like the above.
Right now I have decided to set to 1 only when I need to select multiple files with the stylus, and change it back to 0 thereafter, or before a reboot. What a pain!
Planet X said:
Hi all,
The easy way to select multiple files in Explorer is the Windows way of selecting multpile files. Just press CRTL on your keyboard (you have one ) en select the files you want... It's Windows isn't it?
Click to expand...
Click to collapse
True
but I prefer doing in portrait - if I open the keyboard to use its CTRL key, the screen switches to landscape mode.
I have just upgraded from a TyTN2/Kaiser to a new TP2/Rhodium running WM 6.1 .. and am enjoying the experience except for one fly in the ointment.
Text selection in certain apps is incredibly painful: using the stylus to select a portion of text is almost always interpreted as an attempt to drag-scroll the display. "Almost always" because if you time it properly, waiting a second or so and start dragging before the context menu pops up, then it sorta kinda works. But the selection seems to kick in quite some time AFTER beginning to drag, and therefore doesn't start at the beginning of the target. And Double-clicks (to select a whole word) no longer stretch word-for-word as I drag.
Most apps still work fine, but the following key apps suffer this annoying misbehaviour:
Contacts - But only the "Notes" tab. All text in the "Details" tab behaves as expected!
SMS texting - This occurs when selecting "Send Text Message" from a contact's Summary display (which is actually my preferred method as it is the quickest!). And it also occurs if you start an SMS from the messaging app via menu options Menu\New\SMS. But if you compose an SMS in the threaded view of a conversation in the same app, then the text selection is ok!
I can't find any posts by others who might be experiencing something similar, so is there a solution for this? A registry hack maybe? Am I the only one who has noticed this problem, or am I the only one who is annoyed so much by it?
Notes tab of Contacts app: I experience the same here. But it doesn't really bother me too much since I rarely have to select text here.
Messaging App: I didn't know you can select text like that (ie. tap and hold for a bit and drag) until you mentioned it! Anyway, if you want to select text here, you can always tap "Menu" and then "Select Text".
ohyeahar said:
Notes tab of Contacts app: I experience the same here. But it doesn't really bother me too much since I rarely have to select text here.
Click to expand...
Click to collapse
I use the contact notes extensively, so it is extremely frustrating to have it compromised and complicated now (compared with TyTN2).
ohyeahar said:
Messaging App: I didn't know you can select text like that (ie. tap and hold for a bit and drag) until you mentioned it! Anyway, if you want to select text here, you can always tap "Menu" and then "Select Text".
Click to expand...
Click to collapse
Ahh - thanks for that! Now if only i could find a way to keep that as the default
** UPDATE **
** UPDATE **
I just noticed that everything works properly .. if and only if you use "My Mobiler" to remotely control the phone. So you can use your mouse and your desktop monitor to drag select text in the above compromised apps (including Active Tasks by the way) .. and everything will be fine.
But when it come to using the stylus on the phone's touch-screen directly, the selection still misbehaves!!
This is not a workaround, just mentioning it in the hope that it might help someone enlightened enough to be able to piece the puzzle together
http://forum.ppcgeeks.com/showthread.php?t=85583
Here's a solution to your problems.
digitaliceblast said:
http://forum.ppcgeeks.com/showthread.php?t=85583
Here's a solution to your problems.
Click to expand...
Click to collapse
Thanks, but i'm not sure how exactly does it solve the problem? If you mean the post by orlandojumpoff (post #16) about pressing and holding and then dragging when the animation starts, then that's actually the problem itself.
The animation goes by so fast, that each time you do this, it takes a few false starts before you manage to time it right. The overall effect is to give priority to TF3D scrolling at the expense of functionality in terms of text selection. It makes me want to rip out TF3D by it's heart, which of course is a bit overkill.
I'd settle for being able to tell TF3D to stop interfering in specific apps, or simply to stop interferring while editing. Actually, come to think of it .. another viable option might be to find a way to get that animation to take a little longer ... hmmm
One thing you can do to mitigate it somewhat is to double tap on a word to select a word, triple tap to select an entire line. I use Pocket Informant and it too won't allow me to drag to select unless I try to time it like you do. Another trick is to use the hardware keyboard, and your arrow and shift keys combined to select text.
Sure wish the good things we like about WM would stick from version to version, and the bad things would be fixed and stay fixed. Hey, it could happen
trids said:
Text selection in certain apps is incredibly painful: using the stylus to select a portion of text is almost always interpreted as an attempt to drag-scroll the display...
Click to expand...
Click to collapse
There is a similar problem on Topaz (Diamond 2). It seems finger scrolling sensitivity was made too high and it can no more tell finger from stylus. I found a (partial) solution. Maybe it works on Rhodium too.
- Find the registry key "HKLM\Software\OEM\TFLOSettings".
- It should contains a subkey named "TFLOIgnoreAPPs". If it does not exist create it.
- For every application where you want to be able to select text add a string value called "IgnoreAppXY" where XY are two characters different for every entry.
- As value enter the name of the application EXE file as seen in file explorer (warning: case does matter).
From then on for that applications finger scrolling is suppressed and text selection works as expected.
This is a sample from my registry
[HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings\TFLOIgnoreAPPs]
"IgnoreAppST"="WiFiNetwork.exe"
"IgnoreAppYT"="YouTube.exe"
"IgnoreAppPH"="PIMHelper.exe"
"IgnoreAppNP"="NOTEPAD.exe"
"IgnoreAppCE"="ContactEditor.exe"
"IgnoreAppTM"="tmail.exe"
"WiFiNetwork.exe" and YouTube.exe" were already there. I added "PIMHelper.exe" (editing inside SPB Diary Today plugin),
"ContactEditor.exe" (editing for Contacts), "tmail.exe" (editing for SMS and email) and "NOTEPAD.exe" (Orneta text editor).
Hope it helps.
That method worked for me for Pocket Informant, using "ignoreappPI"="PocketInformant.exe".
Thanks!
SOLVED!
oruam57 said:
[HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings\TFLOIgnoreAPPs]
"IgnoreAppST"="WiFiNetwork.exe"
"IgnoreAppYT"="YouTube.exe"
"IgnoreAppPH"="PIMHelper.exe"
"IgnoreAppNP"="NOTEPAD.exe"
"IgnoreAppCE"="ContactEditor.exe"
"IgnoreAppTM"="tmail.exe"
:
:
Hope it helps.
Click to expand...
Click to collapse
Brilliant - Thank you! This is EXACTLY what i was hoping for! Awesome!
Update:
I posted this brilliant solution to the standard thread for Rhodium Cabs,Tips,Tweaks etc
.. Thanks again oruam57!
Just a word of caution. My device already had [HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings\TFLOIgnoreAPPs], with YouTube as the only exclusion, but i notice that the board seems to introduce a space into the "TFLOIgnoreAPPs" portion, which might cause problems for some folks who want to try this out.
And for the record, this solution does not solve the problem for the standard editor for Contacts and Tasks, which doesn't have a Process whose name you can use. So I'll start looking at custom editors for Contacts now, but it's good to have this handy tweak within reach!
trids said:
And for the record, this solution does not solve the problem for the standard editor for Contacts and Tasks, which doesn't have a Process whose name you can use.
Click to expand...
Click to collapse
Maybe I do not understand exactly your problem but on my Topaz:
- in the first tab of standard Contacts and Task editor text selection does work (do not know why, I suppose Touch Flow has some internal logic);
- in the second tab (Notes) of Contacts text selection can be forced working by inserting the process "ContactEditor.exe";
- in the second tab (Notes) of Tasks text selection can be forced working by inserting the process "poutlook.exe".
At any rate using Dotfred's Task Manager (http://www.dotfred.net/TaskMgr.htm) you can inspect processes and windows on your phone and with a little patience you can find the owner process of any interesting window.
Hooray!
oruam57 said:
Hope it helps.
Click to expand...
Click to collapse
Thank you soooo much oruam57! I searched for hours yesterday for a fix for this issue. It was driving me crazy. I made two of my own for ListPro and eWallet and they work great now too. THANKS!
oruam57 said:
Maybe I do not understand exactly your problem but on my Topaz:
- in the first tab of standard Contacts and Task editor text selection does work (do not know why, I suppose Touch Flow has some internal logic);
- in the second tab (Notes) of Contacts text selection can be forced working by inserting the process "ContactEditor.exe";
- in the second tab (Notes) of Tasks text selection can be forced working by inserting the process "poutlook.exe".
At any rate using Dotfred's Task Manager (http://www.dotfred.net/TaskMgr.htm) you can inspect processes and windows on your phone and with a little patience you can find the owner process of any interesting window.
Click to expand...
Click to collapse
@ Oruam57, you're right, thanks again! I was in fact using DotFred's Task Manager to discover the processes .. but i came to the incorrect conclusion (that there was no identifiable processes, for Tasks and for Contacts) because i saw no change in the processes listed between editing and not editing their notes, as poutlook.exe was still running after i edited the notes and while the list of tasks/contacts was still displayed.
And this is how I overlooked the possibility that poutlook.exe itself was the editor
BTW, i notice that the exclusion for poutlook.exe works for the notes of both Tasks AND Contacts, they seem to use the same editor. I have no ContactEditor.exe listed at all, must be for your custom editor.
I tried with on WLMMessenger.exe, but it didint work.
I still cant select ( highlight ) text from a conversation. When i do it begins to scroll..
Has anyone the solution?
I recently upgraded from a T-Mobile Wing to the T-Mobile TP2, and for the most part I am really appreciating the improvements in hardware and software.
One thing that is bugging me, though, is that when texting or writing an email on my Wing I would be offered a list of possible words after typing the first few characters. I could select one with the arrow keys, and then press space to accept. This made typing out messages much faster. Also, it would auto-correct certain words - like changing "i' to "I", or "adn" to "and".
I can't seem to find a place to turn these features on in my TP2.
It originally came with WM 6.1, but I have since upgraded with the official WM 6.5.
Any ideas?
Edit:
I should also mention that I am talking about using the hardware keyboard. I am aware that you can bring up the on-screen keyboard, select XT9, and close the on-screen keyboard - and then you will have word completion functionality, but the setting does not seem to be persistent.
Thanks!
It should work, just open up the keyboard in landscape mode and click the same XT9 key. If not go search for a registry change to have it default to that setting.
burtonsnow8 said:
It should work, just open up the keyboard in landscape mode and click the same XT9 key. If not go search for a registry change to have it default to that setting.
Click to expand...
Click to collapse
My point was kind of that I don't want to open the on-screen keyboard and select XT9. It becomes pretty unwieldy to add those steps every time I slide out the keyboard.
I was hoping that someone could point me to an option setting that I hadn't stumbled across.
It seems an odd bit of functionality to have been removed from the OS, so I was hoping that it was there, but not enabled - make sense?
Thanks for the tip, though
qwkynuf said:
My point was kind of that I don't want to open the on-screen keyboard and select XT9. It becomes pretty unwieldy to add those steps every time I slide out the keyboard.
I was hoping that someone could point me to an option setting that I hadn't stumbled across.
It seems an odd bit of functionality to have been removed from the OS, so I was hoping that it was there, but not enabled - make sense?
Thanks for the tip, though
Click to expand...
Click to collapse
On my phone it was saving XT9 as the default for messages, even after a soft reset. I'm running Mighty Mike's 6.5 sense 2.1. Here is a possible solution (post 7):
http://forum.ppcgeeks.com/showthread.php?p=1578880
burtonsnow8 said:
On my phone it was saving XT9 as the default for messages, even after a soft reset. I'm running Mighty Mike's 6.5 sense 2.1. Here is a possible solution (post 7):
http://forum.ppcgeeks.com/showthread.php?p=1578880
Click to expand...
Click to collapse
Thanks,
My phone is not saving XT9 as a default at all. As soon as I open a new message it is back to ABC mode. I checked the setting in the link that you shared, but mine was already turned on. Seems to make no difference to the hardware keyboard.
Thanks again