Develop Bugs

ALL rgu to hv conversions are wrong!!! WHY?

Has anyone else noticed that the HV to RGU and RGU to HV convertors Suck.
None of them work properly and they throw load of errors up.
Below is an example of what i am getting:
[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
As everyone can see these are all wrong, when i try to process back from rgu to hv i get error messages, and the only way to get rid of the error messages is to do this:
[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free"[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
You have to manually site there pressing return all the way through BOTH registry rgu's
what is the problem with this. does anyone else get this?
I have been sat here for 3 hours trying to get all of the entries on separate lines.
there has to be a faster way of doing this?
are you seriously trying to tell my that JJ, Sleuth, Schaps etc etc all sit there for hours pressing return?
No i dont think so, so it is possible that someone can enlighted me as to what i am doing wrong
thanks
bennec83

Ive never experienced any errors with rgu to hv and voce versa conversions. I'm still using CORE's Kitchen!

Set 'Wordwrap' to 'off' when editing if using Notepad.

And make sure you set it to Unicode and not ANSI...
You have to check a few things.
1) REGEDIT4 at the top of the file
2) wordwrap is off
3) Save as Unicode
4) Leave a blank line at the last part.

bernardryan said:
And make sure you set it to Unicode and not ANSI...
You have to check a few things.
1) REGEDIT4 at the top of the file
2) wordwrap is off
3) Save as Unicode
4) Leave a blank line at the last part.
Click to expand...
Click to collapse
Right.
Never 'take for granted' every details.

make sure you have both .dll's present in the directory when you make the conversions (cereg400.dll & msvcr71.dll).
i had similar issues and found out I forgot to copy one of them althou everything "seemed" to work fine.
cheers,
dan

Somewhat related issue ... any help appreciated...
I'm trying to build a package for one of the apps I always use. I have been somewhat successful, but I see (when doing a WinDiff comparison on REG dumps before and after CAB installation), that there are several more Registry Entries created than can be gleaned from the CAB file. Several of these REG entries include a CLSID.
I used one of the online GUID generators to provide me with the GUIDs for the DSM and RGU files ... no problem.
But the CLSID entries already in my registry dumps obviously don't match this ID. So, do I:
1) make the CLSID entries in my RGU to match the ones in my REG dump?, or
2) make the CLSID entries in my RGU the same as the ones generated for my DSM and RGU files?, or
3) Change the GUID numbers on my DSM and RGU to match those of the REG dump?
Does it matter WHICH way I do it? Do my GUID numbers need to match the CLSID numbers at all?
Any help would be greatly appreciated.
Thanks a lot,
-pvs

Dont work SMS sending button in WM6

Hello all. I am engaged in development WM6 rom for MPX200 (SP). The system works well, but yesterday I found a very serious problem: then i'm click "Send" button in SMS writing form - nothing happens! Why can it be?
I tryed to insert sms.dll and sms_providers.dll from WM5, and WM6 emulator build, but it did not help. Also i tryed to insert tmail application with outres.dll and outlook.exe... Dont work
My registry values:
[HKEY_LOCAL_MACHINE\Comm\Cellular\SMS\Protocols\WDP]
"Name"="Microsoft WDP SMS Protocol"
"DLL"="SMS_Providers.dll"
"ExportPrefix"="WDP"
"Priority"=dword:20
[HKEY_LOCAL_MACHINE\Comm\Cellular\SMS\Protocols\WCMP]
"Name"="Microsoft WCMP SMS Protocol"
"DLL"="SMS_Providers.dll"
"ExportPrefix"="WCMP"
"Priority"=dword:25
[HKEY_LOCAL_MACHINE\Comm\Cellular\SMS\Protocols\Broadcast]
"Name"="Microsoft Broadcast Message SMS Protocol (Receive Only)"
"DLL"="SMS_Providers.dll"
"ExportPrefix"="Broadcast"
"Priority"=dword:30
"AppName"="\\Windows\\tmail.exe"
"Params"="-Text"
[HKEY_LOCAL_MACHINE\Comm\Cellular\SMS\Protocols\Text]
"Name"="Microsoft Text SMS Protocol"
"DLL"="SMS_Providers.dll"
"ExportPrefix"="Text"
"Priority"=dword:10
"AppName"="tmail.exe"
"Params"="-Text"
[HKEY_LOCAL_MACHINE\Comm\Cellular\SMS\Protocols\Class2]
"Name"="Microsoft Class2 SMS Protocol"
"DLL"="SMS_Providers.dll"
"ExportPrefix"="Class2"
"Priority"=dword:13
"AppName"="tmail.exe"
"Params"="-Class2"
[HKEY_LOCAL_MACHINE\Comm\Cellular\SMS\Protocols\Notification]
"Name"="Microsoft Notification SMS Protocol (Receive Only)"
"DLL"="SMS_Providers.dll"
"ExportPrefix"="Notify"
"Priority"=dword:15
"AppName"="tmail.exe"
"Params"="-Notification"
[HKEY_LOCAL_MACHINE\Comm\Cellular\SMS\Protocols\Status]
"Name"="Microsoft Status Message SMS Protocol (Receive Only)"
"DLL"="SMS_Providers.dll"
"ExportPrefix"="Status"
"Priority"=dword:5
"AppName"="tmail.exe"
"Params"="-Status"
[HKEY_LOCAL_MACHINE\Comm\Cellular\SMS\Protocols\Raw]
"Name"="Microsoft Raw SMS Protocol (Receive Only)"
"DLL"="SMS_Providers.dll"
"ExportPrefix"="Raw"
"Priority"=dword:0
"AppName"="tmail.exe"
"Params"="-Text"
Please, help.

And, sorry for bad english

edited i can resolve this problem

we find the system sms program can send the sms message! you can save the message to draft box after finishing typing the message, then move the draft message to out box, the system sms will send the message immediatly. In fact, when you press the send button, system really do something but cannot complete the process.

Is it ok?............

i am waitting for the wm6 for mpx200 which can sending sms~

New SMS

Hi,
I am trying to change one of my soft keys to "Compose a new SMS" but I am unsure of what file needs to be launched to allow me to compose a new SMS, could someone point in the right direction? I am running WM6 with vp3G 3.62.3 rom. Thanks guys!

I believe a shortcut like this will do it:
20#\Windows\tmail.exe -service "SMS"
And you can check this thread out.

you can also check this thread...
http://forum.xda-developers.com/showthread.php?t=359458&page=33

New Menu for WM5 (also works for WM6 of course) might be worth checking out. It is hands down the most useful program I have on my hermes.

Do this registry edit (note : 113 is for right softkey, 112 is for left)
[HKEY_CURRENT_USER\SOFTWARE\MICROSOFT\TODAY\KEYS\113]
Open = windows\tmail.exe -service "SMS" -to "" -body ""

Tilt2 PTT button Remap

I am looking for someone who still has the stock ATT rom to give me some information so I can attempt to remap the PTT button for MS Voice Command. I have keyboard config installed, but so far I have not had much luck getting it to work the way I want it.
If someone could be so kind, I need the following information. With a registry editor, goto:
HKLM\Software\Microsoft\Shell\Keys
Please include all the entries under that section. They should look something like this. They will be label with codes like 40C6,40C7...etc
Code:
(default) "path to your program in quotes"
dword: BtnWnd value=0
dword: Flags value=0
string: Name value=Button 6
string: ResetCmd value "path to your program in quotes"
string: WndCls LEAVE BLANK

just go into settings, buttons, and set push to talk as voice command. it lets you do that on the stock rom.

I use AE Buttons. It will let me use a single click for "ok/close" and a long press for voice command.

The Jack of Clubs said:
just go into settings, buttons, and set push to talk as voice command. it lets you do that on the stock rom.
Click to expand...
Click to collapse
The ROM I use does not have those buttons mapped under the buttons config. That is why I would like the registry entires so I can add them.

Pops_G said:
I am looking for someone who still has the stock ATT rom to give me some information so I can attempt to remap the PTT button for MS Voice Command. I have keyboard config installed, but so far I have not had much luck getting it to work the way I want it.
If someone could be so kind, I need the following information. With a registry editor, goto:
HKLM\Software\Microsoft\Shell\Keys
Please include all the entries under that section. They should look something like this. They will be label with codes like 40C6,40C7...etc
Code:
(default) "path to your program in quotes"
dword: BtnWnd value=0
dword: Flags value=0
string: Name value=Button 6
string: ResetCmd value "path to your program in quotes"
string: WndCls LEAVE BLANK
Click to expand...
Click to collapse
KEYS
40c1
-default: "\Windows\Voice Command.lnk"
-Flags: 0 (DWORDecimal)
-Icon \windows\voicecmd.exe, 0
-Name Send key(Hold)
-ResetCmd "\Windows\Voice Command.lnk"
40C5
-BtnWnd 0 (DWORDecimal)
-Default "\Windows\Start Menu\Programs\Push to Talk.lnk"
-Flags 0 (DWORDecimal)
-Icon \Windows\PTTMgr.exe, 0
-Name PPT Button
-ResetCmd "\Windows\Start Menu\Porgrams\Push to Talk.lnk"
-WndCls

Push to-->talk, text & directions

Hello!
For the topic of this discussion, I would like to use the following web link as reference. Please visit:
http://www.taganize.com/signature/signature.html
This link will ONLY work in smart phones like iPhone and Android. Directions icon works best with Google Maps installed.
The idea here is that when a link is provided to this page or these icons embedded into email signatures people can contact each other with simple push of a button from smart phone. Especially if person isn't in a persons contact list.
The html code for this page is straight forward:
<html>
<head>
<meta name="viewport" content="width=device-width">
<meta charset="utf-8">
<title>Signature</title>
</head>
<body text="#000000" bgcolor="#FFFFFF">
<font face="DejaVu Sans">
<center><img src="http://www.taganize.com/signature/taganize.png" width="500" height="90"/></center><p>
<center><font size="3"><b>Activate NFC chips and generate QR codes in seconds.</p>
<i>Reuse them forever!</b></i></font><p></center></font>
<center><img src="http://www.taganize.com/signature/call_me_now.gif" width="160" height="40"/></center>
<p>
<center><img src="http://www.taganize.com/signature/text_me.png" width="80" height="80"/></center>
<p>
<center><img src="http://www.taganize.com/signature/directions.png" width="80" height="80"/></center>
<p>
<center><font size="2"><b>Icons powered by Taganize.com<br></b></i></font></center>
</body>
</html>
But look at the setup procedure and steps
Preparations- Get these three things squared away first:
1. Create Taganize.com account
2. Obtain three images of your choice representing: Call Me, SMS and Visit Me and/or Directions.
3. Setup a hosting account where images and html files can be placed. The pratical thing for novices to do is sign up for either a 'Pancake' account or 'Droppages' accounts and enable access to ones Dropbox account. THIS IS ALL FREE TO DO! As you experience more of Taganize and what Taganize can do for you these third party services will become indispensible in all your QR and NFC needs! See:
A) https://pancake.io/
B) http://droppages.com/getting+started
STEP # 1
1. Sign In to Taganize.com
2. Create Folder 'My uri's' or similar
3. Create three tags:
a. Name your first tag 'Telephone'. In 'target url' field type tel:00358-Area Code-Number NOTE: 00 replaces +. No spaces allowed!
b. Name your second tag 'SMS'. In 'target url' field type sms:00358-Area Code-Number NOTE: 00 replaces +. No spaces allowed!
(If user wants to add message to SMS then do this: sms:00358-Area Code-Number?body=TYPE MESSAGE HERE)
c. To enter directions using geo uri with Google maps (eg https://maps.google.com). Go here!
Right click on the exact location you want to go to and choose 'What's here?'. Coordinates appear top left of screen.
Enter the geo coordinates into the Taganize target url field as follows:
For directions by car enter:
google.navigation:q=60.159057, 24.864673
For additional info on using URIs visit the Taganize.com help section!
4. For each Taganize tag you create you must go to 'Tag Info' located to 'right' of each tag and choose 'view details'. At the bottom of this pop-up window you will find the Taganize assigned url. Write down this url for each of the three tags you create!
STEP # 2
This step involves uploading the three images to a hosting service. Non-novices are assumed to possess that level of knowledge to know what the url of each of their images is.
The urls for images uploaded to 'Pancake' OR 'Droppages' will look similar to this:
Image Location:
http://NAME_USER_ASSIGNS.droppages.com/NAME_OF IMAGE. (example: picture.svg)
http://NAME_USER_ASSIGNS.pancakeapps.com/NMAE_OF_IMAGE. (example: picture2.jpg)
1. User must now upload all three images.
2. User must correctly note the exact url to each image. This can be easily tested by typing each images url in a broswer.
STEP # 3
1. Open 'signature.html' in a text editor
2. We will now assign icons in order from top to bottom. Determine which icon you want to be top, middle, bottom.
3. User will find three lines of code that look similar to this:
<img src="http://www.taganize.com/signature/call_me_now.gif" width="160" height="40"/>
4. Re-enter to each of the three lines the new url for each images location. Adjust the width and height of your image accordingly.
5. Navigate to where the file 'Signature.html' is and open it with your favorite browser.
6. Adjust the width and height accordignly in the signature.html file. Hit refresh on your browser to review changes.
Step: # 4
1. User will find three lines of code that look similar to this: <a href="http://taganize.com/t?c=fC2JgPxr">
2. Replace each line of code with the url You noted in Step # 1 part 4. Make sure they match with your icons.
3. Click save but do not close out.
4. Navigate to where the file 'Signature.html' is and open it with your favorite browser.
5. Provided you entered everything accordingly, web page should open exactly as you want.
6. Upload signature.html file to same destination as images.
7. Type the complete url for signature.html in your smart phone browser.
8. You are now in business.
Would creating an app to do this be a better alternative or is this entireley a non issue and duable?
I set up a poll to hear your opinions.'Just go here:
http://www.taganize.com/signature/signature.html
and click on Uncle Sam.
Thank you!!