Screeen off - P3300, MDA Compact III General

Hi,
my XDA Orbit have the screen off.
I can activesync the PC, and I can flash the engine.
Now I have the original OS from O2 but the screen is off.
I suppose that the screen is not broken because sometimes is on (yesterday the screen show the HTC logo screen) but it doesn´t work.
I can access to bootloader mode too but I can´t see something on the screen, I don´t see the three colors on the screen, it is black and it don´t work.
When I power on the Orbit it syncs with the PC but the screen continues black.
I made soft reset and hard reset but it didn´t make something. I flashed it with others OS but nothing.
I don´t know what can I do.
help me, please
thank you

I had an issue like that waaaay back. Though mine was to do with the baclight settings, I just tried to navigate to backlight settings while out in the sun.
This doesnt seem to be your problem though as you say you have actually managed to flash new ROM to it?

will it be a software or/and a hardware problem?
thanks

Probably hardware as you say you have flashed new ROMs to it and still it shows nothing,

Related

Screen Lock

hi,
does anyone know how i can set it so the screen auto locks after a given amount of time or is there a freeware app that can do this please. because i rather have it that having to remember to press the power button to lock everytime, sometimes i might forget.
cheerz,
snoop
Lock the Screen? Power-Button simply switches the Device of, e.g. the screen. In Power Management you can set a Device timeout in Battery Mode and on AC Operation. This is equal to pushing the Power Button
I think i see the problem, or i'll tell my problem with that issue...
When you push the power-button the screen turns off and is locked, but if you receive a sms or so, the screen returns back on and is not locked...
ok ye i think u get my point.
i dont know about screen lock after receiveing sms or call.
but i c the point of samson, pressing the power botton does lock the screen.
snoop85 said:
ok ye i think u get my point.
i dont know about screen lock after receiveing sms or call.
but i c the point of samson, pressing the power botton does lock the screen.
Click to expand...
Click to collapse
look for deviceock or vj devicelock.
There is a today-application called BatteryStatus. With its help you can lock the device automatically when it is shut down. Does the job for me - of course you allways have to unlock the device after turning it on.
drmadu said:
There is a today-application called BatteryStatus. With its help you can lock the device automatically when it is shut down. Does the job for me - of course you allways have to unlock the device after turning it on.
Click to expand...
Click to collapse
hi
do u have the file? As im sure there would be many apps with similer name. would be great if u could attach file plzz
thnx
Snoop
snoop85 said:
hi
do u have the file? As im sure there would be many apps with similer name. would be great if u could attach file plzz
thnx
Snoop
Click to expand...
Click to collapse
If you had bothered typing 'BatteryStatus' into Google you'd have seen it was the first hit. Establishing it is the right program is simply a case of reading the web page. Why are people so goddam lazy these days?
yes ok i get your point. sorry.
right i have installed. lots of nice options and things. but have little problem now. As we knw the device has the function where as the backlight will turn off after a set amount of time. Mines set to 30sec for battery power and 1min for external power.
After 30secs (using battery) it does its job and turns off the backlight. Normally i would press the power button and device turns back on. HOWEVER! since installing batterystatus the device just wont turn back on. I mean its got enough battery, i can tell this because 1) the light at the top flashes 2) Heres the strange thing , the only way i seem to be able to waking the device from backlight is by pluging in the usb cable.
So i thought i would try and un-install the app see if that would help..but nope that didnt help because it still does the same thing.
After installing the app i did a soft rest. I thought it might help, but it didnt. This is the other thing, once i did this, i see the t-mobile splash screen where shows the ROM and other info. And then i just goes blank for a while....and then i see the T-mobile PIN entry keypad splashing by every few secs. I was only able to by pass this after trying and trying to enter pin number on a black screen.
Do you think i should do a hard-rest? Dont really want to do this. Means i have to re-install my little apps and contacts, email settings etc etc.
Can anyone help me with this problem please??
Hi there, i had quite te same problem, after a soft reset the backlight turns on until the bootup screen dissapears, then the screen seems to be blank, but it shows everything, but without the backlight on. You have to point a light onto the screen and you can hardly see wats on it.
Then go to the backlight settings and turn it up.
Then you have to look at every program, thats adjusting the backlight settings and turn of automatic darken screen or so in the program.
That helped for me.
amokoma said:
Hi there, i had quite te same problem, after a soft reset the backlight turns on until the bootup screen dissapears, then the screen seems to be blank, but it shows everything, but without the backlight on. You have to point a light onto the screen and you can hardly see wats on it.
Then go to the backlight settings and turn it up.
Then you have to look at every program, thats adjusting the backlight settings and turn of automatic darken screen or so in the program.
That helped for me.
Click to expand...
Click to collapse
WOW great i thought it was just me *phew! lol*. Thats excatly what is/was happening to me but....
this app just gets stranger and stranger.
i reinstalled baring in mind your suggestion. I did the same thing i did before, expect i turned the brightness up before i installed. Then once installed waited 30secs and soft restted. And :S stranger thing was that the problem didnt happen this time, i saw the t-mob splash screen, saw the windows mobile green splash screen and then my keylock and then pin number screens.
hmmmm no idea wots that was all about. but hey its all working K.O so im happy now. just got to fiddle with the settings now
Thanks againt to everyones help. Appercaited
Snoop
Had the same problem SPB pocketplus 3 seemed to be the problem did a hard reset and no more pocket plus all problems resolved.
my problem seemed to be SPB PocketPlus too, but i did the thing i wrote earlyer and it still works just fine.
ClearType Lock the screen
I've noted that the screen will be lock when I set the CleartType. Has somebody the same issue?
faria said:
look for deviceock or vj devicelock.
Click to expand...
Click to collapse
people claims in this thread that OnLock is much better than VJ DeviceLock
http://pdaphonehome.com/forums/ppc-6700-xv6700/80830-i-have-written-another-screenlock-program.html
regards

XDA Orbit Screen Problem

Hi Guys.
I've had my orbit for about 3 weeks now, and its been perfect. I had a spare 512mb microSD card lying about so I used that, but my 2Gb microSD card came in the post yesterday.
I put the card into the phone, and then plugged the phone into my computer via USB. The screen turned off, and no matter what I did, it wouldn't come back on.
I reset it using the small button on the side (sticking my stylex pen into it) and it restarted itself, showing the splash screen no problem, but as soon as you would expect the Today screen to show, the screen goes off. It get's weirder, because if I hold down the camera button to turn that on, the screen switches itself on, and you can use the camera no problem. If i hit the windows key, the menu appears, but if I try clicking an icon, the screen goes dead again.
Also, sometimes (not always, don't ask why) if I leave it for a couple of minutes, the screen slowly appears, as if the backlight is very very dim. But the second i tap anywhere, or touch a button, it goes off again.
I can still answer calls, and my alarms still go off. The phone seems to work perfectly, but just not the screen. I think that it might be the backlight having been turned so far down its off, but I don't know how I would go about reseting that.
Sorry for the long story, but any help would be greatly appreciated.
Cheers
have you tried to make a hard reset?
Man I had the exact sane issue. Its to do with the backlight. I had to angle the screen to try and see anything on it, then changed the backlight to full and made sure it didnt switch off after certain time, everything fine since then. dont know how it happened.
exactly like fubofo wrote,try to unplug,screen should be visible again, check backlight prop.-and plug it in.
i have the same problem this appears sometimes.I think this is a damn bug that appears randomized.It happend to me like 6 times.I have the o2 xda orbit with german o2 rom.What's about yours? it dims the light under the normal makeable settings this sucks.And the camera works because the light settings goes automaticly to the highest settings in camera mode.
Hi guys,
I remember having that problem but it was when I tried some programs, including HTC X-button and another called Invisible Shooter. I haven't got any further incident after uninstalling them.
Do you think what you've encountered with may also link to some program you've installed?
BUSPBP
Totally confirmed! Had same issue after replacing a touch screen. Thanks, guys, for a clue!

help! artemis won't turn on!

i've just updated the ROM on my artemis, after CID unlocking etc. It was working fine, although it seemed to occasionally power off whilst copying files to it via AS. Thinking it was the SD card I removed it, and now it won't turn on. Plugging into power for a few mins gives a red light on the top, but I can't power the thing on.
Anyone want to give me some tips on what I can do to rescue it?
Download this HTC P3300 WWE factory rom here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar . Now first launch Bootloader (multi color screen) and just run the ROMUpdateUtility.exe from the rar, voila your device unbricked .
Bootloader: Press voice dialing & on/off button at the same time till you see a multi color screen (red/green/blue stripes)
landwomble said:
i've just updated the ROM on my artemis, after CID unlocking etc. It was working fine, although it seemed to occasionally power off whilst copying files to it via AS. Thinking it was the SD card I removed it, and now it won't turn on. Plugging into power for a few mins gives a red light on the top, but I can't power the thing on.
Anyone want to give me some tips on what I can do to rescue it?
Click to expand...
Click to collapse
Your mobile is actually turned on but backlight is set to lower so your screen does not appear. It 's a known bug changing backlight by itself. It happened to me too with Β&Β4 when I enable Batery Status tray Icons. And happened again on B&B 4.3 twice with no reason and Thanks God not to lower setting.
You have two options (both painfull).
1. Hard reset.
2. Reflash.
Good Luck
i thick it's easyer than reflash or hard reset, just plus the artemis to a usb or to the charger and your screen bright will be at full bright. Once done that, simply adjust the bright when running with battery at control panel.
moonshadow88 said:
i thick it's easyer than reflash or hard reset, just plus the artemis to a usb or to the charger and your screen bright will be at full bright. Once done that, simply adjust the bright when running with battery at control panel.
Click to expand...
Click to collapse
This did not work for me before. I hope you are more lucky.
nor for me - it's dead
freco said:
This did not work for me before. I hope you are more lucky.
Click to expand...
Click to collapse
I'm presuming that it's not actually related to the flash, until proved otherwise though - no-one else has reported any issues and as it was a 2nd hand but new to me handset it seems more likely it already had a fault. Annoying, though.
Ric
my friend had a similar problem with his charmer, although h never cooked it.
if you are in london, go to southall, they will fix it for £20
try plugging in to the charger if the little orange light comes on, its a phone fault, if the little light doesnt come on, your phone is not holding charge, either way can be fixed
Orbit cannot be switched on, and cannot be charged
patterns said:
my friend had a similar problem with his charmer, although h never cooked it.
if you are in london, go to southall, they will fix it for £20
try plugging in to the charger if the little orange light comes on, its a phone fault, if the little light doesnt come on, your phone is not holding charge, either way can be fixed
Click to expand...
Click to collapse
Hi, I'm having a similar problem as you described. When the charger is plugged into my Orbit, the little light does not come on. Moreover, when try to switch my phone on, it turns on and starts booting. But before it could boot further than the O2 splashscreen, it shuts off. Occassionally, I do succeed in turning it on, which it would turn it itself off at random from a few mins to a few hours after turning the phone on. I'm able to access the red, green, blue screen without any problems, and it can be turned on (ie the phone remains in the red, green blue screen) indefinately untill the battery runs out. I've tried re-flashing with the O2 official WM6 (which i was using for a few months already) which didn't make a difference. I'm able to access the phone through activesync just fine, but it wouldn't charge throughj the USB connection as well. I'm currently charging my battery with my friends Orbit.
Would any guru have any clue on what's going on with my phone? Can it be fixed?

[Q] Need Help in Laymen's Terms...Tilt 2 Stuck on Red, Green, Blue, and White Screen.

I have a HTC Tilt 2... I have been having a ton of problems with this phone but when it really freaks out, I usually take the battery out, let it sit a few days and then it starts working again. My phone started doing some funny things today so I restarted it as usual, it freezes and I remove the battery. When I turned it back on I got a red, green, blue and white screen with text:
RHOD300 32M MI-BC
SPL-0.87.0000
MicroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
498, 526 792,855
795,211 214,211
223,845 Calibrated
This has never happened before.
This RGB&W screen used to say serial when it first happend a few hours ago but then I installed ActiveSync and plugged it into PC, now says USB.
ActiveSync won't recognize my device, it does appear in My Computer.
I tried following directions in another forum to turn the device off then hold the pickup/hangup/power button at the same time...a different screen appeared than the forum directed, a gray screen with "Trigger Ramdump Mode"...then I couldn't do anything.
I can restart it back into the tri-color screen...
I need help in laymen's terms. I've never tried to change anything about the phone's operating system, I've never done an update or anything, I do not have the Tilt2 CD.
Right now I have my SIM card and my SanDisk card removed, I was afraid it could get erased when I tried the pickup/hangup/power button trick.
PLEASE SOMEONE HELP!!!!!!!!!
This screen is called the bootloader. Its used by technicians (or more advanced users) to load the OS or "ROM" onto the phone. It may be stuck in bootloader because some of the OS files are damaged or missing, and the OS is not booting up. Or possibly even a hardware failure.
Pulling the battery may/may not be the culprit. I've read someone on here mention that pulling the battery can corrupt files on the phone. If the phone is lagging, frozen, then pulling the battery is not the correct way to restart the phone. The correct method of restarting the phone by soft reset is done by sticking the stylus into the small red hole/button on the side of the phone, while the batter cover is off:
http://www.hardreset.eu/htc_touch_pro_2_rhodium_hard_reset_soft_reset_en.html
Pulling the battery is only a method of last resort, as the soft reset button will work in almost all cases.
Hard reset by holding TALK, END and POWER is probably not going to work. It requires the OS to be working, and you are not even getting to the point that the OS is booting.
Its supposed to say "USB" when the phone is connected to your PC via the USB cable. If I remember properly, it will say "Serial" in bootloader for a second when you plug the phone to USB, and switch to saying "USB" after that. USB is a form of serial connection, after all (USB = Universal Serial Bus). As long as it says "USB", you are in somewhat good shape, since it SHOULD allow you to try the following.
Try downloading the latest ROM from HTC. This is actually a newer version than the ROM that was originally on your phone, but still "official" ATT software. And by most accounts, better than the old ROM. Since its official software, installing this will not endanger any warranty you may still have on the phone.
Its the first file on the following page ("ROM Update"):
http://www.htc.com/us/support/tilt-2-att/downloads/
With your phone connected to your PC by USB, run the .exe ROM update file and follow the instructions that come up on your PC screen. It should work. Try it and let us know.
Bear in mind, you will lose any personal data you have on the phone (contacts, texts, emails, etc). But you've probably already lost those.
Its possible there is some other way out of it, I certainly don't know all the tricks. But in searching around this site, being stuck in bootloader seems to require flashing a new ROM to get out of it. And it seems that you are prepared to lose your personal data, based on the fact that you were already trying to hard reset (the TALK, END, and POWER button process) which also dumps all your data. And flashing the official ROM is really pretty easy to accomplish. Just a pain that you have to re-setup the phone again, since it will basically be returned to factory condition (but in this case, a slightly newer version of the OS).
The SAME thing happened to My HTC Tilt 2 an Hour ago (1/13/2010 4:46pm)
The same exact thing occurred to my HTC Tilt 2 today. It is stuck on the red green, blue and white screen with the same yellow 'config' type message . The white bottom strip has the black letters "serial" typed in.
My problem also, is that the phone stays "on" until i pull the battery out. The moment i place the battery back in the phone, the keys stay lit up instantly and the screen is black. When pressing the power button, then i get the same red, green, blue and white screen.
Ive tried holding the talk/end/power buttons all at the same time, it doesnt make a difference. So i cant get to the step where you press the "volume up" key so to initiate the master reset.
Ihad no idea the HTC Tilt2 would just fry like this. I had no additional apps that were unusual to the norm, i even had more free space than used on the set. its not like the phone was over loaded.
Hmmmmm.... help!!!
Re-read above about "soft-reset" and you might want to try reflash your phone.
Sent from my MSM using Tapatalk
RicoATT said:
The same exact thing occurred to my HTC Tilt 2 today. It is stuck on the red green, blue and white screen with the same yellow 'config' type message . The white bottom strip has the black letters "serial" typed in.
My problem also, is that the phone stays "on" until i pull the battery out. The moment i place the battery back in the phone, the keys stay lit up instantly and the screen is black. When pressing the power button, then i get the same red, green, blue and white screen.
Ive tried holding the talk/end/power buttons all at the same time, it doesnt make a difference. So i cant get to the step where you press the "volume up" key so to initiate the master reset.
Ihad no idea the HTC Tilt2 would just fry like this. I had no additional apps that were unusual to the norm, i even had more free space than used on the set. its not like the phone was over loaded.
Hmmmmm.... help!!!
Click to expand...
Click to collapse
Read my post above. Your OS is missing or damaged, and you need to reflash (re-install) it.
Master reset re-loads the OS from the ROM area of your memory. The ROM is damaged, so their is nothing to reload. That's why its stuck in bootloader (tri-color screen).
redpoint73 said:
Read my post above. Your OS is missing or damaged, and you need to reflash (re-install) it.
Master reset re-loads the OS from the ROM area of your memory. The ROM is damaged, so their is nothing to reload. That's why its stuck in bootloader (tri-color screen).
Click to expand...
Click to collapse
_______________________________________________________
Today, i stuck the battery in the phone (Tilt2) pressed the hard reset keys. THIS time it allowed the volume-UP key to finally kick in the reset to default cycle. I got the phone working again and have restored my last backup So, I havent lost anything.
The only problem now i am noticing is the light on the keyboard never goes off. Even when I power the phone down, "the keyboard stays lit".. I am having to remove the battery just to keep it from draining when the phone is not in use.hmmm. is there a regEdit key I can modify that may turn off the keys? id rather have no light at all over no battery juice. If i can edit the key to turn off the backlight on the keyboard permanantly , this will be a temp fix for me until i get a new phone.
as anyone ever experienced this?
RicoATT said:
_______________________________________________________
Today, i stuck the battery in the phone (Tilt2) pressed the hard reset keys. THIS time it allowed the volume-UP key to finally kick in the reset to default cycle. I got the phone working again and have restored my last backup So, I havent lost anything.
The only problem now i am noticing is the light on the keyboard never goes off. Even when I power the phone down, "the keyboard stays lit".. I am having to remove the battery just to keep it from draining when the phone is not in use.hmmm. is there a regEdit key I can modify that may turn off the keys? id rather have no light at all over no battery juice. If i can edit the key to turn off the backlight on the keyboard permanantly , this will be a temp fix for me until i get a new phone.
as anyone ever experienced this?
Click to expand...
Click to collapse
_______________________________________________________
Well, today 1/18/2011: the above issue seem to have vanished altogether. Very good. I did nothing but what i was resolved to do until I buy a new phone (take the battery out so to completely power down the phone and lights).
Today, my ole third hand decided to work like normal! Yay!. All of a sudden it rebooted, and now the keyboard backlight turns off when the keypad is closed and you can see it light up when extended. and most importantly: the back lighty for the keypad goes "off" when the phone is powerd down. go figure this one.
I am glad its working like normal now, but i know its time to get a new phone. These are just symptoms of the "big-crash" soon to come. I am backing up every day.
For now, very very glad my phone is back to "normal"

screen can't turn on without force reset (P600)

I bought my device (P600) a few month ago,
and suddenly (without changing rom/karnel or doing root) i got a big problem -
when i push the button that close the screen(turn off the screen but the device is still on) or if the screen is turned off automaticly, the screen stay off forever. Even pushing the power button doesnt turn on the screen.
The only way to turn the screen on again is to reset the device (by pushing the power button long press).
I almost sure that the problem is a hardware problem even that it's look like a software problem because after i saw the problem i changed the rom and the karnel to other option to check if the rom/the karnel is the problem and the problem didnt solved.
Someone have a clue which element make the problem?
Thanks (and sorry for my bad english)
shahartal said:
I bought my device (P600) a few month ago,
and suddenly (without changing rom/karnel or doing root) i got a big problem -
when i push the button that close the screen(turn off the screen but the device is still on) or if the screen is turned off automaticly, the screen stay off forever. Even pushing the power button doesnt turn on the screen.
The only way to turn the screen on again is to reset the device (by pushing the power button long press).
I almost sure that the problem is a hardware problem even that it's look like a software problem because after i saw the problem i changed the rom and the karnel to other option to check if the rom/the karnel is the problem and the problem didnt solved.
Someone have a clue which element make the problem?
Thanks (and sorry for my bad english)
Click to expand...
Click to collapse
I'd bet money on it being a backlight issue.
Test it again in a well-lit room with a bright lock screen wallpaper, something with a lot of bright color. Once the screen turns off, wake the device and look carefully to see if you can see anything. You might have to tilt the screen, but you should see a very faint, dark image.
blindmanpb said:
I'd bet money on it being a backlight issue.
Test it again in a well-lit room with a bright lock screen wallpaper, something with a lot of bright color. Once the screen turns off, wake the device and look carefully to see if you can see anything. You might have to tilt the screen, but you should see a very faint, dark image.
Click to expand...
Click to collapse
Amazing that's was the problem!
There is a way to fix it? What is the component that causes this problem?
thank you so much!
shahartal said:
Amazing that's was the problem!
There is a way to fix it? What is the component that causes this problem?
thank you so much!
Click to expand...
Click to collapse
Unfortunately I don't know of any solution other than sending it in for warranty coverage or replacing the screen yourself.
I've seen a couple of other posts on XDA involving the same issue, but never saw a solution. I've even seen this issue a couple of times IRL (not on my device, thankfully) and have not been able to find a solution. The two times I've seen this issue, the backlight level could not be adjusted, either. Whether it was set to automatic or manual brightness, it would never adjust, the backlight was locked at a constant level, until the screen turned off, and then the backlight would NOT come on again until the tablet was restarted. Reflashing stock firmware and doing a factory reset did not help, either. On one of those devices, the backlight DID start working again for a while after a manual wipe of internal storage, but only until the tablet was restarted, and I think that might have been a coincidence, I was not able to replicate that again.
So in short, I'm afraid I don't have a good solution other than hardware repair/replacement via warranty.
this has just happened to mine - will have to send it into repair, but it had CLEAN ROM installed so they might argue re the Knox trigger - really annoyed about this!

Categories

Resources