Related
I own HTC TyTN. I've upgraded to the official HTC WM6 downloaded from your site. since then I cannot pair any device I have made by Globalsat.GPS BT-308 and Headset BTH-818. Before the upgrade it worked fine. It gives an error when trying to pair.Is there any way to fix this problem?
bigdaveb said:
I own HTC TyTN. I've upgraded to the official HTC WM6 downloaded from your site. since then I cannot pair any device I have made by Globalsat.GPS BT-308 and Headset BTH-818. Before the upgrade it worked fine. It gives an error when trying to pair.Is there any way to fix this problem?
Click to expand...
Click to collapse
I have the EXACT same problem, but mine is a BT-338!
I was on Schaps 3.54 and just went to 4.0 lite and it keeps failing the passcode (0000)
Anyone have any ideas??
thanks
Hi
Just had the same problem with Schaps V4.0 Final
installed his new extended rom then did a hard reset - seems perfect now
Bit of a pain as you have to set everything back up again
Where can I find the extended rom. I've Schaps 3.57a and 4.00 also upgraded the radio to 1.50.00.00 but nothing seems to help.
Reinstall of the original rom from HTC fixed the problem!
alright, it's been awhile since i've been here but the last ROM i used was vp3g's v3.62.3 ROM on my ATT 8525. well it works great but here's my prob. it was running a little slow so i decided to try some updated ROMs. Now there was a problem with the build-in keyboard being suck on numeric when trying to use the built-in keyboard while being on a call. It worked just fine with vp3g's last ROM. I tried CRC and Shadow's 6.1 roms and it didn't work so i even tried Schaps latest wm6 rom and it still doesn't work. i don't want to use the on-screen keyboard for long texts messages while in a call, that's a pain in the ass. i can't locate any patches for this issue and i researched and it seems to still be an issue w/ other wm6 roms too. does anyone care about being able to use they're built-in keyboards while on a call to surf or txt? i know i do. i hope others and the cooks read this and understand that is was fixed and it's now broke again and needs a fix again. if i'm over looking something with this issue like a patch or a fix can someone point it out to me?
-raven
Raven,
Currenty, I am running K's ROM v1.30b, and dont have that problem...I was able to use both keypads during several calls - might be an issue with the ROM. Might need to either reinstall or switch ROMs again. (I'm partial to K's and Pay's ROMs)
Pays 6.1 rom has this issue as well... The fix has to be cooked into the rom, as it is a keyboard file that has to be replaced... and supposedly you cannot replace the file via the OS...
i'll try k's rom listed above to see if i have same issue. i really hate using older ROMs but vp3g's as i said was the last one that worked for me, unfortunately. hopefully k's will do the job.
I have used that version of K's Rom and can confirm that it does work. Jumped on the 6.1 bandwagon with Pays and issue is back. I'm actually going to flash back to K's Rom until there is a version of 6.1 with the issue confirmed fixed.
So, has anyone successfully unlocked, hard spl and flashed a new ROM into an O2 Ignito?
There's so little about the O2 ignito here, but i'm thinking to get one and try a wwe Rom on it.
Thanks all
some people have them
http://forum.xda-developers.com/search.php?searchid=16183968
Ehh?
There's not much information relating to the "MDA Compact IV" either.
Windoze9t8 said:
Ehh?
There's not much information relating to the "MDA Compact IV" either.
Click to expand...
Click to collapse
True true, but don't forget it's the same hardware anyway so all of the updating applies to all 3 versions of the phone.
I personally have the MDA Compact IV and have updated ROM/SPL/Radio fine, and my friend has the O2 XDA Ignito and has also updated all 3 of his so i can confirm its safe
The XDa Ignito comes unlocked as standard - you can use any SIM card in it. As for the rest - I put Olinex 1.40 on mine and then have flashed 3 different roms from here all fine
I'm going to put a new rom on my Ignito tonight hopefully.
First though I want a copy of the original O2 rom to put back on if necessary.
So far i've managed to dump the rom from the phone to my computer, but now just need to convert that all back into a ROM somehow.
chippieuk said:
I'm going to put a new rom on my Ignito tonight hopefully.
First though I want a copy of the original O2 rom to put back on if necessary.
So far i've managed to dump the rom from the phone to my computer, but now just need to convert that all back into a ROM somehow.
Click to expand...
Click to collapse
same position here, i got the raw files and the spl but trying to find out how to build a rom with the raw files.
please update if youv managed to find anything
I also have the raw files but if I have no idea how to get these back into a normal flashable o2 rom! I am sure we will manage it if we need it for warranty purposes though if it comes to it
i think we need to start a new thread for this to get more attention, some of the advanced users will deffinitely be able to help.
its worth doing in my opinion
As has already been stated, there's loads of us XDA Ignito users on here. Within 2 days I'd flashed a new SPL and ROM onto my device. Would be nice to have the original o2 rom to roll back to if necessary but I'm perfectly happy with out it currently.
As far as I'm aware o2 are one of the few operators that don't lock their devices. Out of all the handsets I've had from them over the years I'm as yet to receive a sim locked one.
markquinton,
can you help us out with redeveloping the original o2 rom!
seems like you have some ccoking experience having a custom rom on your orbit! see my previuos post in this thread
I'm afraid I only built custom rom's from the base HTC one's made available for the Orbit originally when WM6.1 came out. I've never worked with raw files and wouldn't have the foggiest about how to get them back into a flashable state. Sorry!
hi all am hoping to get this thread going again as im having trouble geting Unsigned-Hard-SPL-Diamond-OliNex onto my ignito. did any of you guys have trouble?
Hard SPL on ignito
I managed to install the hard SPl onto my ignito, but have been unable to flash a new rom.
Think the pre-installed works well though, I just installed the original black theme as the blue o2 one is pants.
Radio upgrade has been fine.
Biggest recommendation I have is to install the VGA version of quick GPS. It REALLY made a difference to my satellite lock times from like 10 mins to about 10 secs
no problems with it works fine mine was on o2 software using latest dutty's now.
give it a go, loads faster now
Hi,...New here,
I have made the leap into modifying my phone's software enough to download "RUU_Vogue_4350_ALLTEL_WWE_3.10.671.1_RS3.42.30_NV2.02_PRL30031_SHIP.exe" from Software.alltel.com. Was this update supposed to "unlock" my GPS? If not, does anyone know how I can accomplish this? Once I get that going, who knows, I might go crazy and utilized some of the fabulous ROMs you all are offering!
Thanks
Yes that rom update is the official Alltel wm 6.1/ GPS update. It also has a 30 day trial for Alltel nav.
dont forget to go to settings>phone>location settings and turn it to "on"
And if your feeling real adventurous go over to ppcgeeks and try shadow-techs "super fast lock on" AGPS fix. Then download google maps and click use gps and you should be good.
P.S ( AGPS fix not nessissary to make it work, just gives you faster locks)
Goodluck!
Thank you both for your advice! I didn't realize I had to turn it on under settings or that I received the new program (alltel navigator). I am on my way now! I haven't tried the fast lock update you mentioned, but I did install the unlocker so I can give some new looks a shot. Any recommendations for roms to try?
Has anyone had any luck with the official 6.1 ROM and getting the internal GPS to work with a 3rd party program (specifically iGO 8)???
Has anyone had any luck with the official 6.1 ROM and getting the internal GPS to work with a 3rd party program (specifically iGO 8)???[END QUOTE]
Mine works perfectly with tomtom7.
Any recommendations for roms to try?[END QUOTE]
Conflippers Alltel ROMs are the best by far, you can check em out over at ppcgeeks.com
Click to expand...
Click to collapse
Click to expand...
Click to collapse
custom ROM & update?
With this update mentioned above..........I have already flashed to a custom ROM, do I have to flash back to the official alltel ROM before running this update? I have flashed to several REV A roms and can't get my GPS to lock or anything? have tried EVERYTHING, believe me...........
thanks in advance for any help!
Mortplayer and TCPMP crash after loading WM 6.1 updates
I have just completed upgrading my OS to the latest 6.1 Pro and installed Conflippers Alltel ROM (Great ROM) however now mortplayer comes up freezes and then exits. Loaded TCPMP and it just crashes. I use NCH Pocket dictate and it had numerous errors on (Alltel) WM6.1 / LBS Update – Version 3.10.671.1 but after the Conflipper ROM, it works great. Is there an issue with WM6.1 and Mortplayer that anyone knows how to fix? Also, I did update Esmertec Jbed 20081203.2.1.cab that fixed the Java issues with the earlier version.
nfsfans rom
You should try out nfsfans roms here, imo
they are the best out there. They have all the new
touch flo features and are very stable.
He also does a very good job updating and supporting them.
nfsfan
+1 for NFSFAN's roms
Another vote for NFSFAN's rom. Only thing not working for me with alltel is mms.
HI
i have kaiser 130
I tried few diffrent android version but with evry version phone cant connect to network sometimes he connects for few minutes but not longer. With windows everything ok
I tried:
Incubus26Jc's Super Eclair Lite 2.1
Warm Donut RLS 5 with Kaiser updates integrated including battery
Im using
HardSpl 3.34
radio 1.70.19.09 (tried 1.70.18.02)
Protocol 25.83.40.02h
Maybe someone had same problem and can help me?
Sorry for my english.
i just checked i was editing nbh for Warm Donut RLS 5 with Kaiser updates integrated including battery
and i was using esclair not donut. (dum) Maybe in this is problem....
I has the same problem too ,waiting somebody give a method to solve this
Have you tried an older radio, such as 1.65.21.18?
No because in guide:"How to replace Windows Mobile with Android (Guide)" (sorry i cant paste link because im new user) is recommended 1.70.x and better here it is "#2 Does your Kaiser have a relatively new radio rom? If not then get one. Recommended to have 1.70.xx.xx and up. "
if it is radio fault so why on winMO with same radio working?
And one more thing kaiser with android finds not 02 but BTCellnet (in the beginning O2 was BTCellnet )
The same radio suggestion was made to me several days ago while trying to get audio working in android (via HaRET). Upping to 1.70.xx didn't fix my issues, but 1.65.xx did.
If you are able to test it in WM, you must still have WM installed. Are you booting android with HaRET?
No i think HAret if you installing to sdcard but im installing not in sdcard.
im doing all by this guide go here to read.
xda-developers > HTC Kaiser: Tilt, TyTN II, MDA Vario III > Tilt, TyTN II, MDA Vario III Android Development
> How to replace Windows Mobile with Android (Guide)
Yes, I know the sticky thread to which you have now twice referred. I am asking how you know wifi works in WM if you have replaced WM with android as the guide leads you to do.
There is no danger it trying an older radio regardless of what the guide suggests. I would respectfully suggest that you give 1.65.xx a shot, despite what the guide says. If the older one works, then you have solved your problem. If it doesn't work, you can flash 1.70.xx back on and try something else.
I am running Incubus's Super Eclair on my device and wifi works flawlessly. I am also able to do BT connections and hear audio. None of these worked when I tried 1.70.xx, so I use 1.65.21.18 instead.
em not wifi iwth wifi every thing ok but mobile newtwork dosent work
Roger that. My recommendation still stands, however.
Trying the alternate radio will take you less than 5 min total including d/l time. You can find it linked in post #3 of this thread: forum.xda-developers.com/showthread.php?t=393182.
You could also try 1.71.09.01, which I see was posted several days ago.
thx m8 its working! just signal strength is bad but still....it works! one more time thank you m8!
m8?
What was your solution?
i have a similar problem. Cannot connect to the internet with 2g/3g, but wifi works. The latest rom did not solve my problem. Maybe i'll try older ones...
hi @all,
any news here?
I got the same problem.
At the moment I have running the version milanche has upped, because I thought it is running for him, so maybe it does also for me. but it doesn't.
forum.xda-developers.com/showpost.php?p=6570064&postcount=7
(sorry, as a new user I can't make a link out of this)
Everything seems to be fine except mobile internet.
Edit:
Maybe I should inform you that I already have edited my APN-Settings. And I really think they should be ok. On WM6.1 these settings are working.
And I like to mention that I'm booting from SD.
Kernel may be ?...
Same problem with my phone. I have installed Froyo as explained in another post on my Kaiser TyTNII and everything works perfect except the phone network. I tried already around 5 diferent radios, with NO results.
Do anybody think this issue may come from the kernel instead ?
Using the "kaisimg-panel2-240x320-2.6.32-tilt-froyo-06-09-10_22.nbh" on my phone.
Thank you.
I have a problem with an i-mate K-JAM ... Some time ago I got this ppc but I went I installed a program and got stuck. Windows and the currency we now find no signal at all looking and looking and still not know what does. please help me
orcatrainer said:
Same problem with my phone. I have installed Froyo as explained in another post on my Kaiser TyTNII and everything works perfect except the phone network. I tried already around 5 diferent radios, with NO results.
Do anybody think this issue may come from the kernel instead ?
Using the "kaisimg-panel2-240x320-2.6.32-tilt-froyo-06-09-10_22.nbh" on my phone.
Thank you.
Click to expand...
Click to collapse
same issue.APN data not working
Incubus26Jc's Super FroYo RLS15
radio 1.65.16.25
kaisimg-panel2-240x320-2.6.32-tilt-froyo-09-09-10_21.nbh
possible solution
I,m started MODEM application,tapped Connect-and looks like APN now working!
Let's see how long it works for you. I have the same setup as orcatrainer but mine works off and on some times. I must add, I have Simple Mobile. They are on the T-mobile network therefore, I cannot access 3G on my tilt. Playing with the 2G setting usually cause my phone to connect to APN until I turn the phone off. Then I have to struggle to get it to work again. I just put my sims back into my Blackjack 2 to access mobile data until this issue is fixed.
illegal2008 said:
I,m started MODEM application,tapped Connect-and looks like APN now working!
Click to expand...
Click to collapse
Hi there, I don't understand well what you did on your phone which made it work. Under which section you can find "modem" application ?
Thanks.
orcatrainer said:
Hi there, I don't understand well what you did on your phone which made it work. Under which section you can find "modem" application ?
Thanks.
Click to expand...
Click to collapse
in applications section-not in settings