#52 Yesterday, 10:39 AM
dealsmith
Junior Member Join Date: Mar 2008
Location: Palo Alto, CA
Posts: 1
Using Jawbone for audio with Windows xp laptop
--------------------------------------------------------------------------------
I have a Jb which I use very successfully with my Nokia N75 phone. I want to use it for skype, etc on my windows xp laptop (a Thinkpad). I have tried several times to set it up but when I connect, I get an annoying rapid 8-tone signal about every 5 seconds. I suspect I have to change some audio setting on the laptop but I cant seem to find and fix the problem. Does anyone know how to make this work?
What is beeping your laptop or your headset? What bluetooth stack are you using on your laptop?
Jawbone with Windows PC
Thanks for your interest. The headset is beeping. I am not sure what bluetooth stack I have. I have a linksys usbbt100 bluetooth device plugged into a usb port. I set windows to use bluetooth for audio and microphone instead of the default internal Intel device. it worked perfectly the first time I plugged it in and paired it with the jawbone. then the next day I tried again and something was wrong. I dont recall exactly what I did but I have now messed with all of the windows settings and cant get it to work. I have also deleted and re-paired a couple of times as well as reset the jawbone. I spent two hours on the phone with linksys and they gave up. The computer works fine for a data transfer via bluetooth with my nokia phone which I did with the help of the linksys tech. I spent a half hour on the phone with Aliph, the jawbone maker, and they said it was not their problem.
You're probably screwed
I think you're out of luck getting the Jawbone to work with XP. XP doesn't currently support bluetooth headsets, and Aliph decided to embrace style of substance and save a few pennies per device by not licensing the WIDCOMM drivers for their headset.
I haven't looked at it, but check out the SP3 white paper to see if that might give you the services you need.
I had this *exact* problem and couldnt figure out how to solve it (my first bluetooth headset)
I think that ringing sound means the PC is trying to connect to the headset, and is waiting for you to press the talk button. So, I pressed the talk button and *nothing*. I pressed it again, and again etc... still nothing. It turns out, I wasnt pressing it hard enough. Anyway, it connected after a while and I was happy.
I think some sets might just have a stiff button or something. But I find I dont have to press so hard anymore - maybe it just takes a while to "break in" the button for everyday use...
I recommend the following steps:
- press the reset button on the jawbone
- pair the device
- turn it off using the talk button (try pressing it from different angles with different pressures)
- turn it on
- wait for your bluetooth software to detect it as a headset
- connecting to the headset using the pc
- wait for the 8 ringings
- try pressing the talk button from different angles with different pressures. the ringing should stop and it should start working...
Hope this helps,
James.
Thanks
I will try this sequence and the careful pushing of the talk button tomorrow. I hope it works. Thanks for the valuable coaching.
Related
Please help me out I'm incredibly frustrated with this thing. I recently got the PDA2k and installed WM05 on it. It looks very nice and it runs speedy with no problems. My problem is the bluetooth which is huge thing to me. Either my headset (Tekkeon Eztalker Mini) is not compatible which I doubt or I'm making a stupid mistake.
This is what I did step by step: I click on the bluetooth icon and turn on the bluetooth, I then put my headset in pairing mode and the imate is able to recognize it and I enter the Pw and I put Set as handsfree. That's it, I would think I would be done at this point yet nothing happens, the headset doesn't do anything and I know its not Tekkeons fault because I was able to hook it up easily with my HP 6315.
So what's going what am I missing?
Also theres a tab at the bottom called "Com Ports" but I only see under this option "Incoming Port", and the description at the top says there should be another option called "New outgoing port". Does this have anything to do with it?
What Am i doing wrong? It's driving me crazy I can't really use the phone without the headset.
help me out pls
Bluetooth
I know the feeling, i have gone back to 2003 cause of that but now i am back on wm5. The bluetooth issue is not fixed yet, it is not stable, it keeps going off. There is a suspend cab file, but it does not work for me yet, also try pokect zen beta. You might get a longer period of bluetooth
thanks for responding, but the problem is not that it suspends or stops working. It doesn't start working at all even though the imate detects it. It's like it's not connected at all, not that it disconnects. I'm doing something wrong I just don't know what.
The bluetooth piece is not faulty and the unit is practically brand new. whats going on?
I used "Display Switch" binded button (From Wisbar Advance 2) or "Toggle Screen" (From SPB Pocket Plus) to turn off the backlight instead of using power button .
This work around will keep bt connection alive.
Note:
1. If you suspend your BA using psShutXP your bt connection .
2. You have to disable auto turn off device under Start -> Setting -> Power
Note:
1. If you suspend your BA using psShutXP your bt connection will be disconnected.
I'm sorry I'm not sure I'm explaining myself correctly. I understand that if the power goes off I will lose the BT connection but the problem is not KEEPING the connection alive, the problem is MAKING the connection. I follow all the steps , the imate recognized the headset but I'm not able to use it..also shouldn't a headset picture show up at the top of the screen when the bt headset is connected (cuz mine doesnt). what am i doing wrong?
thanks.
still need help please.. if someone can walk me through how to setup a bluetooth connection that would be great cuz I apparently haven't done it right.
The headset icon only shows in Phone app
The headset icon only shows up in the Phone application. It no longer is displayed in the notification area (top row).
If your device is paired up, when you make a call, you will see the headset icon in the top right corner.
You may also need to clear any old pairings that you headset has. I have a Jabra 250 and it happens all the time.
there we go you have solved my problem!. I didnt' have to open up the phone application on my hp 6315 to use the bt. So wait can I listen to music with windows media player through the bt headset or does it only work when making phone calls? I was able to listen to music on the HP 6315, is it different with the Imate or is it the NEW 05 os? Please enlighten me
thank you thank you
also one other thing does this mean that if i want to use the headset with the phone that I have to press the answer button on the imate rather than the headset..cuz that would suck big time.
what about when people call me can i answer with the answer button of the bt headset or no?
It works fine with the headset button for answering or hanging up.
Later.......... 8)
droy001 said:
what about when people call me can i answer with the answer button of the bt headset or no?
Click to expand...
Click to collapse
iam currently using latest rom from dopod and motorola 820, although the two earpiece have sounds it is only mono, can someone help to make it stereo? o recomend what rom to use, thanks
In order to have stereo audio on a Bluetooth device, you need a profile called A2DP, which is currently only supported by the latest Qtek Universal ROM at the moment:
ftp://xda:[email protected]_Updates/UNI_QTEK_13077_176_10900_WWE.exe
Dopod has not released a ROM supporting A2DP yet.
thanks for the help, God bless
No problem. Do let us know whether it works well or not.
it works, i have stereo sound, but need improvements, in a song the bluetoth stops 3 to 4 times when playing, the player dont stop its the motorola 820 that stops several times.
I did come across a post with a patch for the A2DP flaw the other day. It's somewhere on this site - do a search and see if you're lucky.
Found it: http://forum.xda-developers.com/viewtopic.php?t=46811&highlight=universal+a2dp
It worked for me for a little while so try it.
Hi,
I have used A2DP a lot with my JasJar the last 4-5 months, and had written a summary of my experiences with this "lag/stuttering"-issue in another thread here...I have copied the most essential of that text below...might be usefull info for you;
-----------------------------------------------------------------------------------
It seems to be two major factors affecting this "stuttering"/"lag" (from my experiences at least...I have used A2DP a lot with my Universal...couple of hours every day);
1. Universal struggling outputting(RAM/CPU...or both!?)
One help here is to apply the registry "A2DP priority" fix (found it in the forums here...and so did richardlai).
Another is to close all programs before using it (I usually do not do this...I usually only do it in hindsight when I get the problem).
2. Signal between Universal and headset struggling (obstructions between Universal and headset, WiFi nearby, so forth)
I for example get this problem if I put my Universal in my trouser pocket (I know, I must have big pockets, and walk around, I get stuttering/lag occationally. If I then take it out, and hold it in my hand farily still when I walk...no stuttering. I have found, that when I walk, it is Ok to have it in my backpack/rugsack...then for some reason it very rearly stutters...so I usually do that.
But when I walk of the bus at work, and walk into the "campus" of my workplace, which is cramped with radiotransmitters (is norways largest Telecom company)...I get a lot of stuttering, and need to take it out of backpack, and hold it in my hand, at it gets a lot better.
In short: A2DP with the Universal works, but is sensitive to disturbance/obstructions/moving around...and to make it worse, it is also sometimes dependant of the Universal itself struggling with CPU/RAM. So you can not totally get rid of the problem...but you can do a lot to minimize it...I almost never experience it now...except in the campus-area at work that is.
I have BTW had the exact same problems before with Qtek 2020 and Qtek9090 (which I got hold of some "A2DP patches", when I had those devices). ...but I really had a LOT more stuttering with those two...so much so, that I never used A2DP with them on a daily basis.
-----------------------------------------------------------------------------------
I also wrote a short post on my experiences with the different stereo headsets I have...yes, they actually act a little bit different it seems (regarding resume/pause button, and how easy/automatic they "reconnect"). You can see it here; http://forum.xda-developers.com/viewtopic.php?t=47977
Hope this is of some help for you!
RonnyGydar: I came across your little summary a little while ago and have done the registry fix, but the problem still exists! Do you think altering the value in some way would help?
richardlai,
I added the registry value manually...found a reg-file (or was it a CAB-file!?) that supposedly should add it...but when I checked later the key was still not added in the registry?
So I added it manually.
BUT, I do still have the problem...but that seems to be radio interference/distance so forth...since when I hold JasJar in my hand and don't move it around, I NEVER have an problem. ...and actually fairly rearly when I have it in my rugsack/backpack.
With 1 or 2 exceptions...where it lagged "all the time"...but then a soft-reset cured it.
So if you have this problem with your phone lying in front of you on the table...then it really sounds like it is the JasJar/Universal that IS the cause (and not interference)...and yes then the registry hack should help.
BUT I have not done any real testing of the effect of it...I am not sure how much effect it really has...all I know is that I had a "lot of problems" with lag before...and now I almost never have it.
...I hate those "diffuse" problems...when it is impossible to measure in a "scientific" way that "this cures it", and "this do not"! :-(
Sorry about the "little help" I give here...but this issue is a bit "fuzzy"...I have gotten it enough under control to that it isn't a problem any more (during a 1 hour workout, I will typically get this gap/lag 0-2 times...and that is not a problem for me...at least compared to what I experienced 6 months ago, where I was lucky if I could hear 10 seconds without any problems).
The stuttering problem seems to be permanent now... Luckily I have a HP hx4700 (which has a Broadcom bluetooth module) and works perfectly with my Jabra HT620s. Anyone using an A2DP ROM other than Qtek? I'd like to try a different ROM to see if it would make a difference.
only a second of sound
i use the qstarz bt stereo headset (http://www.qstarz.com/products/bh-q392s.aspx) and it works fine for phonecalls, but when i set it for wireless stereo and start a media player (TCPMP, WMP, Pocket Player...) i mostly only get sound for one second and then it shuts up. the players keep playing, the buttons on the headset can pause, resume and change tracks but there is no sound at all.
i get full wireless stereo playback occasionally, but i can't figure out what differs from time to time.
i applied the above patch with no success. anyone has a thought on the matter?
Ariel.
richardlai said:
The stuttering problem seems to be permanent now... Luckily I have a HP hx4700 (which has a Broadcom bluetooth module) and works perfectly with my Jabra HT620s. Anyone using an A2DP ROM other than Qtek? I'd like to try a different ROM to see if it would make a difference.
Click to expand...
Click to collapse
I use the BT620s with my Qtek 9000 without much trouble. Here's the trick:
Assuming you have paired with succes. Set headset and BT OFF before starting.
Turn bluetooth ON
wait a second or two
Turn headset ON
wait another two seconds
Now go to BT settings, and connect the headset.
Wait for the little pling sound (the activesync sound ).
Now start Windows Media Player and play an MP3.
Using this sequence has never failed me
edit:
I use the latest OFFICIAL Qtek 9000 WWE ROM. (Without the ExtROM though ) And i did not use any patches regarding A2DP or Bluetooth.
this is what i tried, many times. i get the activesync sound, sometimes from the speakers, sometimes in the headset, but almost always only one second of sound afterwards.
i found that by pairing the headset to the universal by pressing and holding the green button on the headset untill the universal recognises (doesn't take long) gives better results.
pairing it by the instructions of the headset (putting it in discover mode, and then searching for a device with the universal) will give me the one second sound almost every time.
Biffert said:
I use the BT620s with my Qtek 9000 without much trouble. Here's the trick:
Assuming you have paired with succes. Set headset and BT OFF before starting.
Turn bluetooth ON
wait a second or two
Turn headset ON
wait another two seconds
Now go to BT settings, and connect the headset.
Wait for the little pling sound (the activesync sound ).
Now start Windows Media Player and play an MP3.
Using this sequence has never failed me
Click to expand...
Click to collapse
Well, this has ALWAYS been the sequence I use (and I don't think you can do it in any other way). The real problem here is either the buffer memory or processor load.
richardlai said:
Biffert said:
I use the BT620s with my Qtek 9000 without much trouble. Here's the trick:
Assuming you have paired with succes. Set headset and BT OFF before starting.
Turn bluetooth ON
wait a second or two
Turn headset ON
wait another two seconds
Now go to BT settings, and connect the headset.
Wait for the little pling sound (the activesync sound ).
Now start Windows Media Player and play an MP3.
Using this sequence has never failed me
Click to expand...
Click to collapse
Well, this has ALWAYS been the sequence I use (and I don't think you can do it in any other way). The real problem here is either the buffer memory or processor load.
Click to expand...
Click to collapse
Then there is no A2DP problem, the only solution is to lower the overal systemload. Stop all programs you have running, disable every today plugin that need frequent updating (memory, battery meters etc.) Free up as much RAM as you possibly can. I have AT LEAST 16 mb RAM free when playing music via BT.
Hello at all,
I've searched a long time for a solution, but I really couldn't find it.
I have an
- Ameo (same like HTC x7500, with original t-mobile WM6 german) and a
- LG Style-i HBM 700 - http://www.amazon.com/gp/product/B001CZICHA , for calling.
I had bought a couple of weeks ago a wunderful bluetooth bracelet LM 959. http://www.lm-technologies.com/ci/index.php?/products/details/38
Both, the bracelet and the Style-i want and could connect to my Ameo over the same profile (phone profile, hands-free).
I've tried a couple of days, but it doesn't run as I want:
I want that the bracelet will shake when the phone is ringing (that's normal).
And then I will accept the call with my LG Style-i. If the call finish, all should go again in stand by.
If the next call arrive, the bracelet have to shake first, and so on.
But reality is hard and bad:
If I power on the bracelet, and power on the LG iStyle the bracelet go in sleep and the LG Style-i is active connect to my Ameo. No action's could make the bracelet function, only if I power off the LG Style-i. But than I couldn't take a call (not with this brick on my ear)
I think both are using the same profile (hands-free). And only one could go in active, or ?
Is there a way to let both function, and as I want ?
I would be lucky for any suggestions.. any idea ?
I'm afraid I can't answer that with any experience, but I think the bluesoleil driver will allow connections to two devices.
When someone with more experience comes along, does anyone know if it is possible to connect two devices with different profiles.
I wish to connect my car kit (HFP) and an audio streaming connection (A2DP), to a kaiser, and keep them both connected.
ping, I want infor on this to for my ameo before I buy the bracelet!!
new status:
I've seen, that all entries in the registry between the braclet and the LG style-i are different. Not the channel entry : both are channel 0x2.
I've changed the channel from bracelet in the registry:
HKLM/Software/Microsoft/Bluetooth/Device/001b3500023b
from 0x2 to 0x1.
Bracelet connect with Ameo furthermore, but situation doesn't changed.
Now I will change the ROM from 6 to 6.1 (from original t-mobile 6 to sogarth 6.1) this weekend.
let me see ...
bad story ... sorry.
I've changed the ROM from original t-mob WM6 to sogarth WM 6.1 ROM but without any changes.
I've no solution to connect the bluetoorh bracelet AND the Bluetooth headset at the same time.
Any other idea's ?
please help ...
Not possible afaik. I personally tried it when I had two Motorola s9s and only one would connect at the same time :S.
Does anyone know if you can connect to *different* profile devices?
I want to connect a HFP device and an AD2P device.
ian_c said:
Does anyone know if you can connect to *different* profile devices?
I want to connect a HFP device and an AD2P device.
Click to expand...
Click to collapse
Hello all,
I'm currently using wm6.1 build 20273.1.3.3 cook (FInixNOver v3.6) on my Trinity with iDream BTSH01 + Nokia BH-102.
The BTSH01 can act as either "Hands Free" or/and "Wireless Stereo" (A2DP).
I can select which mode I want to use on that device by using the standard "Bluetooth Settings-->Device" menu.
The BH-102 is only an "Hands Free" device.
I successfully can listen music on the iDream and make/receive calls with the Nokia.
As you may guess, my main use of these combination is on the car! the Trinity is used as my MP3 player, my GPS and my phone with ear bud, while its battery is being charged.
The BH-102 works very smooth alone! just need to power it on, wait 2-3 seconds to ear the beep and start to use it, even while receiving a call (it happens a lot while I'm driving!).
That particular cook has the BT sound volume adjustment working very well!
The BTSH01 is tricky to pair... I always have to start it in "pairing" mode and do a BT search on the Trinity (I have a button on the "Today" for that!) to have it work properly. If I not do this way, the music is shopped in 500ms pieces !!!
I can only launch the music/sound app (Mortplayer and/or GPS app) after pairing it. If not, the sound goes out through the internal speaker.
By having the BTSH01 decoding music, the HTC becomes slower (still ok for the GPS app)!
Now, combining both... I'm using both since a couple of days and I still have no procedure to have both running ok (BTSH01 as "Wireless Stereo" and BH-102 as "Hands Free") at first shot!
Sometimes the BTSH01 start to decode my calls, sometimes the BH-102 is not able to pair ... it's always been asked the PIN code.
But, once both are up, I have no more troubles and can start my trip!
i'm using an r35 itech set as handsfree...although it can be switched to include a2dp. however, i also have a sony ericsson car kit that's set for a2dp or wireless stereo. thus, when i'm in the car my u1000 automatically connects to the ericsson and thus streams the music. any calls that come i can answer through my r35. when i leave the car, the ericsson then disconnects with my u1000 (either through range or when i shut off the ignition). my r35 is continuously bonded and thus any calls are answered through it.
i don't think it's really possible to connect 2 bt devices with hands free profiles at the same time. i tried that with both my r35 and ericsson kit....if the first device bonded is my r35 a message appears on my ameo indicating an error when i try to set hands free. it only accepts wireless stereo.
cheers
I don't think so. In my opinion it's not possible. u can use stereo.
I have a 2005 Acura with bluetooth phone. My girlfriend and I both have pairing to it, she has an old Sprint A920, I have a Tmobile TP2. If we get into the car around the same time, her phone always wins! Of course the ideal solution would be if the car had a function to prioritize who gets bluetooth (if it connects hers, then sees mine, to disconnect hers and connect mine), but alas, nothing like that. I assume the car is polling for a bluetooth and picks the first one it finds. It doesn't seem related to who it paired last, or who made a call last, and we tried unpairing both then pairing mine first or hers first.
So, other than her turning off bluetooth (a pain on her phone) whenever we get back to the car, is there any solution to get it to like me more? Is the problem in the speed the TP2 connects? Any way to speed that up with the stock ROM.
And while I'm here anyway, many thanks to all the amazing people in the XDA community.
greatbrit said:
I have a 2005 Acura with bluetooth phone. My girlfriend and I both have pairing to it, she has an old Sprint A920, I have a Tmobile TP2. If we get into the car around the same time, her phone always wins! Of course the ideal solution would be if the car had a function to prioritize who gets bluetooth (if it connects hers, then sees mine, to disconnect hers and connect mine), but alas, nothing like that. I assume the car is polling for a bluetooth and picks the first one it finds. It doesn't seem related to who it paired last, or who made a call last, and we tried unpairing both then pairing mine first or hers first.
So, other than her turning off bluetooth (a pain on her phone) whenever we get back to the car, is there any solution to get it to like me more? Is the problem in the speed the TP2 connects? Any way to speed that up with the stock ROM.
And while I'm here anyway, many thanks to all the amazing people in the XDA community.
Click to expand...
Click to collapse
I've found that my Windows Mobile devices are slower to pair with Bluetooth headsets/car kits than the older dumbphones I've had (mostly Motorolas).
A partial solution to the problem with the Acura HandsFreeLink, if it pairs to her phone first, is to press the HFL button on the steering wheel and say "Next Phone". It will unlink her phone and link to your phone. That way you can keep both phones paired to the car if needed and still use your phone if the car happens to link with hers first.
dwboston said:
I've found that my Windows Mobile devices are slower to pair with Bluetooth headsets/car kits than the older dumbphones I've had (mostly Motorolas).
A partial solution to the problem with the Acura HandsFreeLink, if it pairs to her phone first, is to press the HFL button on the steering wheel and say "Next Phone". It will unlink her phone and link to your phone. That way you can keep both phones paired to the car if needed and still use your phone if the car happens to link with hers first.
Click to expand...
Click to collapse
Awesome solution, TYVM! Funny, I think I remember help telling me that command but never thought that was what it did Now I just have to find a way to say 'next phone' without my g/f hearing me
Anyone else having issues with connecting the 7T to their car and getting audio going out of it? My OG Pixel didn't have a problem, but I have to toggle off/toggle on Bluetooth and then manually tap the car's bluetooth listing to get it to actually 'connect' the audio portion.
Rather annoying, considering I'm only in the car for a few minutes at a time, this either eats into the time entirely, or makes me sit in my car for a couple minutes before even driving to fiddle with the bluetooth settings.
Car has stock headunit, 2015 Evo X. Like I said, original Pixel XL had no issues, but this is annoying. I've tried changing bluetooth versions to no avail. I can see it connecting and dropping the bluetooth connection fairly frequently while staring at it and trying to 'get it going'. But once it connects, it stays there.
My bluetooth headphones (Some knock off cheap Chinese ones for $20) don't seem to have an issue.
My connection to my aftermarket stereo is fine. Just seems a little quieter than my last phone. Connecting is kind of slow too when I start my car but it is automatic.
I don't have any issues with connecting to all 3 cars (2014 Honda Accord, 2009 Pontiac G8 Gt and a 2018 Honda Fit) but I do agree that the volume seems a little lower than my previous phone (Galaxy S8).
Sent from my [device_name] using XDA-Developers Legacy app
Hmm. Weird. Is there anyway I can check for logs to find out what exactly is happening? I haven't rooted, just don't know if it's something I can naturally pull from Android as a whole.
I had the same issue, but when I made the phone discoverable and initiated bt from the car stereo it seemed to work.
I also set a custom pin , not the default 0000
My bluetooth is quiet, but its also static-y. I never had any issues with my G6 and now I get static clipping every 10 or so seconds. Its unbearable.
jagadeesh16 said:
I had the same issue, but when I made the phone discoverable and initiated bt from the car stereo it seemed to work.
I also set a custom pin , not the default 0000
Click to expand...
Click to collapse
I'm not really having an issue pairing it, but it's just connecting after pairing is the problem.
I have changed the default pin. I can see it popping up and down the car stereo a few times in the bluetooth settings before it just gives up.
As for the other issues, I'm not having a problem at all with audio volume, nor popping/static when it finally does connect.
My volume is super low when connected to Android Auto and streaming music. Have to turn the radio up to max. However, I'm assuming that's an AA issue or Android issue, as it seems many others are having the same problem with different phones. Been thinking of adding an aftermarket amp to the car. Maybe I should pull the trigger. Lol
Phreak411 said:
My volume is super low when connected to Android Auto and streaming music. Have to turn the radio up to max. However, I'm assuming that's an AA issue or Android issue, as it seems many others are having the same problem with different phones. Been thinking of adding an aftermarket amp to the car. Maybe I should pull the trigger. Lol
Click to expand...
Click to collapse
Be careful that a bugfix doesn't come and blow your eardrums out, lol.
Milkshakes00 said:
Be careful that a bugfix doesn't come and blow your eardrums out, lol.
Click to expand...
Click to collapse
LOL that would be my luck
.
My OnePlus 7t connects fine and phone works for calls on 2014 cts. The sound comes out of phone can change song on head unit but I can't get audio to play through car. Anyone else get this?
Yeah music stutters with car player... Only calls work. Music works on headphones etc. I couldn't find solution, did network reset, cleared cache. Nothing works.
Seriously!
I've wasted at least two hours already trying all the recommended steps: from flicking icons on and off to a full phone reset.
Still no connection to my Suzuki S-cross car. Multiple previous phones have connected effortlessly.
Even the $50 temporary five year old borrowed phone could handle it.
Anyone got any other suggestions? Yes, tried the AVRCP setting change from 1.4 to 1.6. That didn't work either...
Barebones system reset from scratch running O2 OS 10.0.6HD65AA
Any suggestions greatly appreciated.
I need to be able to talk and drive!
Reset the car radio and clear all pairing data if you can. Then try again.
autosurgeon said:
Reset the car radio and clear all pairing data if you can. Then try again.
Click to expand...
Click to collapse
Thanks for the suggestion.
Tried that.
Tried one other car - no problems.
Tried a tablet and a very old phone with the car and suprise - the car's bluetooth seems to be the problem.
I will try and find out if I can fix the car!
UPDATE: Morale of the story - read the car manual very very carefully and go though each tedious step = SUCCESS
mikefnz said:
Thanks for the suggestion.
Tried that.
Tried one other car - no problems.
Tried a tablet and a very old phone with the car and suprise - the car's bluetooth seems to be the problem.
I will try and find out if I can fix the car!
UPDATE: Morale of the story - read the car manual very very carefully and go though each tedious step = SUCCESS
Click to expand...
Click to collapse
Yep most have lots of tedious steps that are different model to model and if not followed exactly will cause this problem on occasion..
In my case music starts to be scrambled after 10 minutes or so of listening. When I take the phone (so the watch pops up) or turn on the screen it immediately works fine again, but when being put aside and the screen turns off, the issue starts again ..
Also in the early days of my previous 5t I had the same issues but some fix was delivered together with oxygen os update. And now the same story again
I have a different issue with Bluetooth:
- OP7T connects to car Bluetooth fine
- I can make/answer calls
- Bluetooth media works fine
The problem is with Google Assistant & car audio:
- it was working as intended until the latest update - 10.0.15 - I was pressing the button on the steering wheel the google assistant was answering questions through the car bluetooth, no need to switch to bluetooth media.
- after the latest update, when I press the button on the steering wheel, Google assistant pops on the phone , starts to answer question, but cuts off after 5 seconds. the command still goes through and Assistant still runs, but does not come up on the car audio.
- it looks like the Assistant is not connecting to the car as a hands free, but as to a bluetooth handsets.
Anyone experiencing this?