Related
Hi all,
I have been trying to check out the forum here, to try and solve my problem, I literally bought my JASJAR today, and it was giving some wierd behaviour. In an attempt to reload the software (I prefere to reload the entire ROM), something went wrong, now all thats on my screen is "USB" and a lil lower down "v1.01".
ActiveSync obviously not connecting now bcos the OS is not on the JASJAR no more, in my device manager is a "Microsoft USB Sync" under my mobile devices.
I downloaded what I am guessing is WM6, 'JASJAR_WWE_20106_20301_11300_wwe_ship' from another thread in this forum, tried to load that but cant communicate with device cos no activesync.
I have tried the different reset options, like the 2 function keys and the reset on the back, I push 0 to clear, and then it jus goes back to the USB v1.01 thing.
I am running windows vista home basic, with the Windows Mobile Device Center, it synced perfectly with this software, communicated properly with the update tool, until my device reset and activsync lost connection, then i was stuffed.
Any help will be appreciated.
Thanks in advance.
Sounds like it is your first time with the upgrade. What you are seeing on the screen is the bootloader, which is what we use for flashing new ROMs.
ActiveSync or Windows Mobile Device Center (how come you have both on Vista?) will therefore not respond. This is fine, because we use a different program to load the new ROMs.
If you look at the folder you downloaded, chances are that there should be a program called "ROMUpgradeUt" or something similar. Provided that you have not changed anything in the folder, you should be able to flash the new ROM by simply following the instructions in the program.
You can also read this link for more information: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Here is an instruction guide on ROM upgrading: http://forum.xda-developers.com/showthread.php?t=269118
how come you have both on Vista?
Sorry, I don't mean to sound like I have both, I recently moved to Vista, and am used to calling it activesync and not WMDC.
Thanks, will have a look
Ok, well I have got it up and running again, only problem now is activsync keeps freezing when I try and sync the device...any ideas?
I landed up using my work computer, which has XP on it, and then used MTTY and that connected fine, on Vista it simply didnt wanna work.
I ran the utility for those 'stuck on serial/usb', and that fixed it. Now I would like to load up WM6, but it keeps getting communication failures.
Thanks for the help guys....I got it working...running on WM6 now...whoo!!
I have an 8525 and I am trying to upgrade to HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108.exe and I keep getting the same error message. "Error 264 The Update Utility cannot connect to your PDA Phone. Please check that your USB/cable is connected properly between the PC and your PDA Phone " My phone is connected and everythign appears fine until I try try to update. I have even tried the guide at http://www.mrvanx.org and that doesn't work either. Any ideas?
Invalid Vendor ID
O.k. I am a little further. It starts the install and then I get the "Invalid Vendor ID" error message.
Do you have activesync installed on your pc?
Are u using vista or xp?
I'm also having a problem trying to upgrade to WM6. Whenever I start the process it switches my phone into standby then as activesync can't see the phone I get an error message!
What are your answers to the two questions above? Running vista or xp? What version of activesync if any are you running?
Are your phones unlocked, CID, etc?
I don't know if it is required or not for a "official update" but have you installed HardSPL?
On another note, I would post this question into the parent thread for the rom that you are trying to install, that way you may get more looks. Good luck
Running Windows XP with Activesync 4.5 not sure about SPL?! How can i find out?
See here, http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
Read over all of this, in Re: to the hardspl, i believe its the first hyperlink listed.
Assuming that you are set on that particular rom, what I'd do is extract the rom file from the package you downloaded using winrar and then use customruu to load it on. Ive' never had any problems with it on XP. This protects against bricking as much as possible. Also just in case you haven't seen this before, flashing roms and hardspl from here will void your warranty if you need to have it serviced at any time. There is a way to get back to warranty acceptable 'standards' though. But you can't take it in as is.
Hi,
I tried to upgrade my XDA using Ranju's latest updater, the whole process failed and now I'm stuck at the BL screen "USB" at the top (when connected, otherwise it says "serial") and "v1.00" at the bottom.
My PC, SyncCentre and Windows Mobile Device Centre (I'm using Vista) all show the device as being disconnected (up until trying to upgrade everything had been fine).
As it's not showing up on my PC all of the software options for recovering it dont fail, all end with a plethora of USB not connected errors etc
I've tried the how-to on the wiki: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial to no avail.
Does anybody have any ideas? Greatly appreciated,
Thanks,
Lee
with jasjar-bl1.01-ruu-v1.2 I always restart my JJ Leave your uni in bl and start the application Good luck......
I think the Vista is not the problem this upgrade don't use AS or "in italian centro gestione dispositivi WM"
Bye
M.C.
Well, I flashed my Qtek a while ago, it failed to flash (using Vista) and doing a hard reset after it whas hanging at the startupscreen(the one with all the rom/radio numbers). No matter what I tried, following the instructions on Vista windows mobile center all failed... The good news is that your computer and your PDA still see when it is connected, ie USB/Serial, like in my case!
I then tried it on my desktop/XP, it flashed without a problem...
The funny bit is that I flashed my herald (WM6) 2 times using Vista without any problem...
I cannot explain but if U have the possibility, try and see if it works on XP...!
Good luck!
are you trying to flash it WITH your SIM card and / or SD card inside? If so, try taking them both out! It worked for me a few times!
I would start by getting rid of vista !
i had the same xprience
the different was i downgrade from wm6 to wm5 (i need the vcall)
failed in vista, succeed in xp
-> my advice : try in xp !! don't forget to remove the sd card
Manual for how to flash a rom in Vista
Read this post, you have the solution to the problem here:
http://forum.xda-developers.com/showthread.php?t=313001
You need to update the driver manually, if not, will not be able to install the driver.
You need to do this without sd/sdhc and without the sim.
If you follow these instructions, you can flash with success.
Greetings.
Kali.
Hello,
I have a spv M2000 orange. I tried to update to windows mobile 6 I found here.
everything went fine at the beggining, but then activesync did the usual beep when disconnection occurs between pc and the smartphone. there was still the message saying "checking the information on your device... please don't disconnect... "I waited for a long time. but nothing happened then. still a black screen on my smartphone with "USB V2.07" written on it.
can anyone help me to find out a solution ?
thanks !
there is nothing lost or broken at this point, just try again using the instructions given here: http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
there is probably something you forgot.
thanks Chef_Tony, you give me back some hope !
I tried to flash back to wm2003, and it works fine.
I will follow very closely all the steps of the procedure described on the page you pointed at, and tell you afterwards.
thx again.
ok it works fine.
I forgot to remove the memory card when flashing the first time.
thanks again for the help
Hi. I'm a new member. I need your help. I try to flash my PDA2K with HTC_BlueAngel_WM6.1_WWE_Final_by_Ham3r using WMDC on my Pc with Vista... but without put my device into Bootloader mode. The software is started, my PDA2K was blocked with "USB" on top of the screen and "V2.07" on the right bottom. After nothing more. I tried SR, HR, like the instruction on http://wiki.xda-developers.com/index...ade1_WM2003SE0, but nothing. My PDA2K is dead. On screen, nothing. What can i do? I can resurrect my PDA2K? Thank you
ok, first of all, that link does not work. secondly, yes! your Ba is not dead, it is in a state called "stuck in bootloader" which is due to your attempt to flash under windows vista, which does not work the same way as under win xp. because, during the upgrading process windows vista, being smarter than xp, discovers the device changes and downloads new drivers and installs them, which disconnects the device, and in the beginning of the upgrade process the upgrade utility tells you, never to disconnect the device, unless the process is finished, but since vista is doing it on its oqn, you can't do anything about it.
normally i would advise beginners to use a windows xp pc, i even heard of people managing to upgrade from vista, using a windows xp virtual machine, but in your case, with the device already stuck, you should have a deep look over -=this=- and -=this=- before even attempting to flash again. then you should think, whether you deleted wm2003's extrom before you started upgrading, probably not!
so to upgrade, you should flash wm2003 again, first.
the entire process of upgrading is described pretty good -=here=-.
you say, you want to upgrade to wm6 from wm2003 and you use vista, then you get to all the steps needed for the first upgrade, please don't skip anything, please read carefully, if there is anything, you don't understand, please post back here, BEFORE destroying the device
with best regards
Chef_Tony
Thank you for your help. I'm following step by step the instructions of your links, but my PDA2K don't work. It's appeared again "Serial" at the top and "V2.07" at the bottom, but the Perform Reset don't appeared (point 3 of Link: http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5). Also WMDC don't see the devices either before or after the instruction on this link http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista_Pic ( i have never seen the boot option because my device don't make a perform reset). Help me....Thank you for you patience.
P.S.: I have also tried with my other pc with XP, but even ActiveSync see my PDA2K. However, in both my Pc, device manager show mobile device (microsoft usb sync).
I followed this procedure in this link http://forum.xda-developers.com/showthread.php?t=304408 with mtty.exe and my device is raised. Now is as good as new. Try with caution now. Thank you for everything.
I can't get it to connect via activesync on xp or mobile device center on a Win 7 machine. I can get the screen that tells you to hit send button to reset, but that does nothing as it goes back to tmobile window. I can also run the oem rom update (get 226 error at 8%) and rom's from this site (get 270 error at 3%), even though my dash never shows up in the sync apps. Trying to run the auto.bat, app unlock, etc. don't work as my computer says to connect to the device, which I am, but again activesync doesn't see it.
any ideas on how to upgrade this phone?
thnx
nwbearcats98 said:
I can't get it to connect via activesync on xp or mobile device center on a Win 7 machine. I can get the screen that tells you to hit send button to reset, but that does nothing as it goes back to tmobile window. I can also run the oem rom update (get 226 error at 8%) and rom's from this site (get 270 error at 3%), even though my dash never shows up in the sync apps. Trying to run the auto.bat, app unlock, etc. don't work as my computer says to connect to the device, which I am, but again activesync doesn't see it.
any ideas on how to upgrade this phone?
thnx
Click to expand...
Click to collapse
All your questions can be answered in the STICKY...
As stated read the sticky before posting "just like it states"
On that note thread closed.