.Mun. BT DUN not working om WM 6.1 - P3300, MDA Compact III ROM Development

In the past I have successfully re-added the BT DUN profile to various WM5 and WM6 versions of my Orbit. But now, with WM6.1, after installing the .Mun. hack, other device still don't see the DUN service of the Orbit. Anyone had a similar problem?

lbendlin said:
In the past I have successfully re-added the BT DUN profile to various WM5 and WM6 versions of my Orbit. But now, with WM6.1, after installing the .Mun. hack, other device still don't see the DUN service of the Orbit. Anyone had a similar problem?
Click to expand...
Click to collapse
WM6.1 has btdun service included, have you tried to add BT dun profile without .mun. hack? It's possible it coflicts with microsoft drivers...

Silly me. Removed the .Mun. package and all is working well. Anyone wants to throw eggs?

Related

BT activesync problems. Please help

Hi,
I have the Orange SPV M2000 with TuMa 1.3 rom set onboard. I'm trying to get my device to talk with my new Macbook using third party software from The Missing Sync. It is listed as working with WM2005 devices such as M5000 but i cannot get it to work with my BA. It seems to revolve around its inability to list activesyncing via BT as one of the BT services available. I have been in touch with the Missing Sync guys but no joy as yet. Any thoughts here?
The process sugested by Missing Sync is to set up a new BT partnership via the activesync tool on the BA. The two devices recognise each other and even seem to pair but after that no joy. Apparantly Activesync should be listed as a BT service but it isn't...
Really appreciate any help on this one.

Common Issues with WM5 ROMs

Hi all, for the last few months I have tried various Universal ROMs and even various WM5 phones including HTC and HP iPAQ, there are some commond issues which I haven't been able to figure out a permanent solution (work arounds are available though not ideal), these are:
- SIP (System Input Panel), if you install any additional SIP like SPB fullscreen keyboard, Monster SIP etc, every time after you soft reset the device, unless you load them up straight away, you will not be able to load them up after a few minutes (don't know exactly how long) until next reset!! This is a great pain, I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
- Bluetooth problem with Tomtom 6 (TT6). With lots of AKU versions of WM5 (apart from Helmi AKU 3.3 I tried so far, haven't tried it with Helmi AKU 3.5 though so I can't be sure with that version) every time I start up TT 6 it asks me to enter the passcode to pair my BT GPS receiver again even though I have done it 100 times already!! Again I have seen this issue on other WM5 devices in addition to Universal so I am wondering if any one has a solution.
Thanks!
kevin.jiang said:
- Bluetooth problem with Tomtom 6 (TT6). With lots of AKU versions of WM5 (apart from Helmi AKU 3.3 I tried so far, haven't tried it with Helmi AKU 3.5 though so I can't be sure with that version) every time I start up TT 6 it asks me to enter the passcode to pair my BT GPS receiver again even though I have done it 100 times already!! Again I have seen this issue on other WM5 devices in addition to Universal so I am wondering if any one has a solution.
Click to expand...
Click to collapse
I've never seen this problem on either my Universal, or my friend's Wizard (which I set up for them).
I don't know if this is the "standard" way, but basically, I pair the GPS device (a BT-77 in our cases), and then setup an outgoing COM port to it, and then simply tell TomTom to attach to that COM port. In fact, I have two BT-77s, one set to COM0 in the car, and a hand-held one on COM4, and I can switch to my heart's content, and have never been asked to re-pair.
Cheers,
Steve.
kevin.jiang said:
- SIP (System Input Panel), if you install any additional SIP like SPB fullscreen keyboard, Monster SIP etc, every time after you soft reset the device, unless you load them up straight away, you will not be able to load them up after a few minutes (don't know exactly how long) until next reset!! This is a great pain, I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
Click to expand...
Click to collapse
I know many SIP can not be able load out. Did you solve this? or how to load them with permanent solution?
kevin.jiang said:
I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
Click to expand...
Click to collapse
i've installed a hebrew sip but i dont have a problem loading it anytime i want.
although, sometimes i have a problem composing a new text message. the device gets stuck sometimes if the keyboard it not opened when i click "new".
happends only with helmi's 3.5 and with the hebrew keyboard. doesn't happen with default SIPs.
whats te program you found to load the all the SIPs?
is it "SIPz"? (from the same maker of PQz).
I have the same problem with blue thooth and CoPilot I use. The software is iGo. I tried several roms, but after I switch off the GPS and switch it on, it always wants to pair with Uni again.
StevePritchard said:
I've never seen this problem on either my Universal, or my friend's Wizard (which I set up for them).
I don't know if this is the "standard" way, but basically, I pair the GPS device (a BT-77 in our cases), and then setup an outgoing COM port to it, and then simply tell TomTom to attach to that COM port. In fact, I have two BT-77s, one set to COM0 in the car, and a hand-held one on COM4, and I can switch to my heart's content, and have never been asked to re-pair.
Cheers,
Steve.
Click to expand...
Click to collapse
Thanks for the suggestion Steve, I have indeed paired the BT GPS receiver, created the outgoing port as COM4 (actually I also tried other available ones) and point TT6 to it. I have been using this BT GPS receiver for over 2 years with various devices including my good old HP iPAQ H4150. This problem didn't happen with my Universal's original Orange SPV M5000 ROM and it doesn't happen with Helmi's AKU 3.3/3.5 ROM either which is the main reason why I am using AKU 3.3 now.
I have this problem on JWright's i-mate AKU 3.2 ROM, my wife's HP iPAQ rw6828 (WM5 AKU 2.3), my friend's T-Mobile MDA Vario II (HTC Hermes, WM5 AKU 2.3).
vuquan said:
I know many SIP can not be able load out. Did you solve this? or how to load them with permanent solution?
Click to expand...
Click to collapse
No good solution and I am wondering if anybody else knows how to solve it. I have tried hacking the registry to make my additional SIP default and I ended up with my universal not being to boot until a hard reset. The work around is this SIPChange attached, basically you set which one you want as default, then every time you soft reset it loads that SIP automatically before it becomes impossible to load it.
kevin.jiang said:
Thanks for the suggestion Steve, I have indeed paired the BT GPS receiver, created the outgoing port as COM4 (actually I also tried other available ones) and point TT6 to it. I have been using this BT GPS receiver for over 2 years with various devices including my good old HP iPAQ H4150. This problem didn't happen with my Universal's original Orange SPV M5000 ROM and it doesn't happen with Helmi's AKU 3.3/3.5 ROM either which is the main reason why I am using AKU 3.3 now.
I have this problem on JWright's i-mate AKU 3.2 ROM, my wife's HP iPAQ rw6828 (WM5 AKU 2.3), my friend's T-Mobile MDA Vario II (HTC Hermes, WM5 AKU 2.3).
Click to expand...
Click to collapse
I've not had the problem with either of the O2 ROMs, and Ivan's AKU3.5 test ROM - I haven't tried any other ROMs. I unticked the "secure connection" - not sure if that's relevant or not.
I found that only COM0 and COM4 seemed to be available for outgoing ports.
Before you go into TT6 - is the GPS device in the device list, along with the outgoing port set up correctly? Do you switch BlueTooth on and off? I have it on all the time - I'm just trying to think of things that might be different in our configs.
Cheers,
Steve.
I have both TT6 and iGO 2006 on my XDA Exec. The TT6 (and TT5 before that) always worked well with the BT-77 by simply pairing the GPS to the XDA EXEC on a COM port and selecting that COM port in TT6.
With iGO 2006, on the same XDA EXEC, it will ask to pair the BT-77 every time I launch iGO 2006. The only solution I could find was to use Franson's GPSGate to create Virtual COM ports for the BT-77 and to select this virtual COM port in iGO 2006.
StevePritchard said:
I've not had the problem with either of the O2 ROMs, and Ivan's AKU3.5 test ROM - I haven't tried any other ROMs. I unticked the "secure connection" - not sure if that's relevant or not.
I found that only COM0 and COM4 seemed to be available for outgoing ports.
Before you go into TT6 - is the GPS device in the device list, along with the outgoing port set up correctly? Do you switch BlueTooth on and off? I have it on all the time - I'm just trying to think of things that might be different in our configs.
Steve.
Click to expand...
Click to collapse
Thanks for the advise, I have tried unticking "secure connection" as well and it didn't help.
From what I am gathering in the information supplied it looks to be caused by a combination of the BT GPS receiver, the WM5 and the Sat Nav software.
I can't remember what make and model my BT GPS receiver is because I bought it over 2 years ago and back then I didn't care what model it is. Now that I can't tell it from looking at the outside of this thing.
This is a wierd problem as with different combination of the GPS reciver, WM5 and software it may or may not happen. What I was having that problem using Tomtom 6 I tried the GPSInfo shareware and it didn't ask me to pair every time. Very strange, anyway I am alright now with Helmi's AKU 3.3 using COM5 as the port with my good old BT GPS receiver and TT6.
kevin.jiang said:
No good solution and I am wondering if anybody else knows how to solve it. I have tried hacking the registry to make my additional SIP default and I ended up with my universal not being to boot until a hard reset. The work around is this SIPChange attached, basically you set which one you want as default, then every time you soft reset it loads that SIP automatically before it becomes impossible to load it.
Click to expand...
Click to collapse
Thank you so much! it work on my device.

Bluetooth DUN Profile

Hey all,
I've got a bit of a problem. Since the release of wm5 AKU 3.0, BT DUN is no longer present, instead we are supposed to use BT PAN. I read the articles in which microsoft explains why they removed it, and also that it is optional in WM6. I saw the .cab files in MUN's WM6 thread but I can't get them to work.
I use BT DUN to dial in to my domain with my VPN at the windows logon screen. BT PAN is about as useful as a frying pan in this case because I need to be logged in to connect BT PAN...I think they call that a conundrum
Anyway ever since I've had the trinity I have been using ICS with USB which does auto connect before logon. The thing is I prefer BT because it is just simply more convenient.
If anyone has a solution, either buy adding a working BT DUN profile or with BT PAN I'd really like to know about it.
Look here:
http://forum.xda-developers.com/showthread.php?t=307235
I already read that thread but it's a no go
I also would really need the DUN Profile, but it does not work on mine too...
I just went and tried superdave's widcomm stack for the hermes, no joy though.
I'm running WM6 SE (not TE) and my DUN profile is flawless.
Use it from my TomTom 910, laptop and work PDA.
Wish PAN was supported by other devices so I could use all 3 at once.
what's WM6 SE?
and where can I get it?

dell aximx50v AO3 ROM

hi,
i had just upgraded my dell axim x50v with A03 rom.
It doesnt have a ftp bluetooth and connection cannot be made because it doesnt offer any sevices.
pls advice , do i need to install any additonal pbluetooth program ?
thanks.
What A03? WM5? WM6? Or is it just the point of the game to guess?
For info, I have WM6 A03 Beta 1 and bluetooth works fine (with my GPS at least, so the serial port service works).
dell axim x50v wm6 ao3
how about the ftp bluetooth file transfer ?
are they working ?
Dunno, I really only use bluetooth for the GPS.
It's well known that WM6 has issues with WiFi and WPA on X50v, but with bluetooth, I assumed everything was working (since COM ports work fine).
I used bluetooth for network sharing at some point, which required a hacked Widcomm driver for a USB dongle, but that's a different story (and a different PPC using a CF bluetooth card anyway).

Upgrading to WM6/6.1 losing passwords...

Can someone give a definitive answer to this, I am using an Orange SPV M700 which I have flashed with the generic Dopod WM5 rom Version 1.23.405.2.
I have tried various WM6 roms and have had the same issues with them all, I loose bluetooth pairing authority, the wirless keys are lost and Tomtom map activations are lost too.
Is there a way to resolve this issue as I see there are a lot of users with the Trinity and WM6 in signatures, so someone must be doing something right.
After having flashed my phone from WM5 to WM6, the tomtom ID of my phone changed too... Perhaps Tomtom's support will help you with that?
I have no problem with bluetooth...
It's not that, perhaps I should have been a bit clearer.
After flashing to WM6 & pairing across bluetooth for the activesync, connecting it to my wireless & activating the tomtom maps, give it 24hours or so and these details are lost. Although the bluetooth PC is still in the paired devices, the pairing code needs to be re-entered as does the wireless key if I try to connect to that.
The Tomtom map needs reactivating again also.
peterelliott11 said:
The Tomtom map needs reactivating again also.
Click to expand...
Click to collapse
I already read somewhere about this.
When you do some pairing with bluetooth and PC sometimes you lose the maps!!
Don't have further details though

Categories

Resources