Related
Update: ZaJules has created a One step cab fix off these instructions - should make things much easier Read his post here! http://forum.xda-developers.com/showpost.php?p=1161652&postcount=11
I left the contents of the old post bellow incase people wanted to check the steps but probably the one step install created above will be much easier for most people!
Well after a long bit of searching reading I finally got it to work!!!
This is with a Motorola H700 bluetooth headset though I'm guessing it will work with any compatible headset
thanks to BKbroil's post (http://forum.xda-developers.com/showpost.php?p=1146407&postcount=317) I followed his directions.
it still didn't quite work - after fiddling with the registery a little bit (he didn't include what type of reg entries they needed to be) it finally started working!
Here are the steps I followed:
1. Install VC 1.6 (make sure it is in Main memory)
2. Download Bluetooth Voice Command 0.9f.cab
3. Download BTVoiceCommand.exe
4. On your phone, create the Folder \Program Files\Bluetooth Voice Command
5. Copy BTVoiceCommand.exe into this folder
6. Extract the "Bluetooth Voice Command 0.9f CAB.zip" file, then copy the cab to the phone and run it
7. Create the following Registery Entries:
HKLM\Software\OEM\VoiceCommand:
Default - String - (value not set)
LaunchAPEnable - DWord - 1 (decimal)
Path - string - \Program Files\Bluetooth Voice Command\BTVCBasic.exe
VoiceCmdDuration - Dword - 30 (decimal)
VoiceCmdEnable - Dword - 0 (decimal)
and
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway:
BTAGExtModule - string - \Windows\btagext.dll
This last one was already set for me but his directions had it so I included it for you to check
8. Go to newly created BT Voice Command config (in Programs) and tick off the check box "Enabled"
9. Set command duration to 30
10. Save settings and exit
11. Soft reset TyTN
12. Delete Headset Pairing
13. Recreate Headset Pairing.
14. Set button 5 to VoiceCommand
15. Reset Device
Hope this helps people out there!!!
Chy
P.S. - I take no credit for anything here except pulling together everything into one neat place and figuring out the registery entries that worked for me - all the hard work was done by the smart guys in this thread! http://forum.xda-developers.com/showthread.php?t=283412
EDIT - attached the files I needed (not including VC 1.6) - they were scattered throughout that other thread and hard to find - thought it would be easier if they were in one place and clarified instructions!
Edit 2 - Here is the Exported Registery entries if it makes it clearer - I understand it the way I wrote it more but I suspect the smart people here will understand this more:
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"VoiceCmdEnable"=dword:00000000
"VoiceCmdDuration"=dword:0000001e
"Path"="\\Program Files\\Bluetooth Voice Command\\BTVCBasic.exe"
"LaunchAPEnable"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"BTAGExtModule"="\\Windows\\btagext.dll"
hmmm, when i try to enable xcsdm`s hack an unexpected error occurs in btvc config.exe (nullreferenceexception ...).
what is wrong?
Oh I actually had that happen to - then I went to check on the registery settings (which were the next step) and they were not there -I manually edited them and then went back and did that step again and this time it worked fine! Perhaps I should edit the post and reverse those steps (even though that's the order he had them in)
Sorry that I forgot to mention that!
EDIT: I have gone and revised the instructions above to follow my exact steps as opposed to quoting his steps as before then listing my corrections after - I think this makes the directions clearer and easier to follow - if you have any further questions - let me know - I'll do my best to answer!
could you please post what kinds of regvalues have to be created? f.e. dword etc.
thanks
jammerlappen said:
could you please post what kinds of regvalues have to be created? f.e. dword etc.
thanks
Click to expand...
Click to collapse
They are there - they were listed down bellow but have since been edited into the post above. However here they are again
HKLM\Software\OEM\VoiceCommand
Default - String - (value not set)
LaunchAPEnable - DWord - 1 (decimal)
Path - string - \Program Files\Bluetooth Voice Command\BTVCBasic.exe
VoiceCmdDuration - Dword - 30 (decimal)
VoiceCmdEnable - Dword - 0 (decimal)
and
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway
BTAGExtModule - string - \Windows\btagext.dll
still no progress, the same error occurs. though values are saved ):
jammerlappen said:
still no progress, the same error occurs. though values are saved ):
Click to expand...
Click to collapse
Go over one more time the steps since I've edited them - I just hard reset it and reinstalled following them exactly as stated and following the instructions point by point the way I posted them worked first time no errors!
Is there anyone that would be kind enough to make a cab that creates the registry settings?
I must be doing something wrong because the registry ones I keep making aren't working..
VERY Helpful!
@chymmylt: Super job - thanks for making this so much easier!
Dean
Can you clarify step 10
OK here is a one step cab to fix Voice Command 1.6
Please test it and let me know if there are any problems
Instructions:
Install Microsoft Voice Command 1.6 (Duh)
Copy this cab file to your device and tap to install.
Then go to Start > Programs > BT Voice Command Config
and tick enable.
Tap "Save"
Tap "Exit"
Go to bluetooth devices and remove your headset.
Power off your Device (Hold the power button till it asks to shut down)
Restart device.
Re pair your headset.
make sure button 5 is set to Voice Command (Settings > Buttons)
Reset Device.
This works perfectly on my device.
Credit to all the brains on XDA-Devs (you know who you are). This is not my work I only packaged it for easy install.
Jules
Just tried and when I click save I get a
An unexpected error has occured in BTVC Config.exe
Select quit and then restart this program, or select details for more information.
slimsaturn said:
Can you clarify step 10
Click to expand...
Click to collapse
Sorry bout that - written way past my bed time - now step 10 is as it should be - save and exit (cut and pasting when you're tired should not be allowed!)
ZaJules said:
OK here is a one step cab to fix Voice Command 1.6
Please test it and let me know if there are any problems
Instructions:
Install Microsoft Voice Command 1.6 (Duh)
Copy this cab file to your device and tap to install.
Then go to Start > Programs > BT Voice Command Config
and tick enable.
Tap "Save"
Tap "Exit"
Go to bluetooth devices and remove your headset.
Power off your Device (Hold the power button till it asks to shut down)
Restart device.
Re pair your headset.
make sure button 5 is set to Voice Command (Settings > Buttons)
Reset Device.
This works perfectly on my device.
Credit to all the brains on XDA-Devs (you know who you are). This is not my work I only packaged it for easy install.
Jules
Click to expand...
Click to collapse
Good work! I'm not good at creating installers but I figured it wouldn't be long before somebody compiled it into an easy installer!
@ZaJules and chymmylt
I just tried the cab along with your instructions and it worked like a charm. Excellent and great work to all that were involved.
I don't understand why the program crashes for me but works for others..
Mine is on a fresh install of .20 ROM with VC 1.6 and my exchange server and thats all I have done..
Hmmm.. Not sure. as I said, I didn't write any of these files, I just read through this post http://forum.xda-developers.com/showthread.php?t=283412 and pulled together everything I did into a single post to try to make it easier for people. It seems to be working for a number of people but there are a few people that it is not working for.
Did you install VC to your voice or your storage card - everything I've read said not to install it to your storage card - install it to your device - you might check that. If you installed through Zajules cab, try looking through my instructions and check that everything checks out. I'd also try reading through the forum above and see if anything strikes you.
I've seen reports of it working on an 8525 and I have a TyTN (And I suspect it should work on any hermes hardware). I have the 1.34 radio rom though I don't know if that should make any differnce (It might - Bluetooth is controlled by the radio - I really have no idea if that would help and hate to suggest anything that could brick a device - just brainstorming here). I don't have exchange installed so I couldn't say if that has anything to do with it.
Out of curiosty, when you run \Program Files\Bluetooth Voice Command\BTVCBasic.exe manually does it work?
Yes everything is installed to device and that file you asked me about launches the VC for me to input something..
I have tried to add the registry settings but I am very clueless and they aren't coming out right..
Okay I looked and
HKLM\Software\OEM\VoiceCommand
Default - String - (value not set)
LaunchAPEnable - DWord - 1 (decimal)
Path - string - \Program Files\Bluetooth Voice Command\BTVCBasic.exe
VoiceCmdDuration - Dword - 30 (decimal)
VoiceCmdEnable - Dword - 0 (decimal)
This entire string is missing..Heck the whole folder VoiceCommand is missing and I can't for the life of me figure out the correct way to add it..
Ok finally figured out how to make the registry keys that are missing so now the applicationlaunches with no error and all the registry settings match but it still won't launch when I press the headset button.
It has worked before WM6 so I know my headset works..
Man If I could just get this going its all I need.. :-(
We should post all the fixes the have been found for wm6 on the dash here to make it easier to find....
Reminder FIX:
From RandyRants.com:
Step 1: Make a change to your Normal profile. Raise the volume of some alert or something. Change something to get the device to create the following file: \Application Data\Profiles\Normal.prof.xml
Step 2: Connect via ActiveSync on XP or WMDC on Vista and copy this file to your desktop.
Step 3: Edit this XML file - add the following blurb to the SoundCategories section:
<characteristic type="Reminder">
<parm name="Script" value="v0p" />
<parm name="InitVol" value="4" />
</characteristic>
Step 4: Save this file on your PC.
Step 5: Set the System flag on this file. You can do this with a right click on the file and setting the properties or via a command prompt: attrib +s normal.prof.xml.
Step 6: Now copy it back to \Application Data\Profiles
I posted this to another thread, but the steps have changed... seems that if you don't have the System attribute set on the profile XML files before moving them to the phone it renders them useless. It also seems that on Vista with WMDC it keeps the attributes fine (inspite of having to change the OS to even see the files) but on XP/2003 with ActiveSync the System flag is removed when the file comes from the phone.
Either way, good luck with it!
Click to expand...
Click to collapse
Rotated video FIX:
freyes01 freyes01 is offline
Member
Join Date: Apr 2006
Location: Miami
Posts: 35
[United States] [U.S.A. - T-Mobile]
Default
getwsted at HF found a solution for the screen rotation issue:
Add the following Key "Rotation" under HKLM\System\GDI\
e.g. [HKLM\System\GDI\Rotation]
Then Add this dword.
"LandscapeMode"=0
It solved my problem with Orb and other Videos with WMP in full screen mode.
__________________
Thanks,
Freddy Reyes
http://www.freddyreyes.com
Click to expand...
Click to collapse
SMS Sent Notification Removal:
Download this Here YOU HAVE TO SOFT RESET FOR IT TO WORK!!
Bluetooth Voice Command Fix:
WM6 Voice Command 1.6
Voice Command is a very powerful program that will allow you to control your WM6 Excalibur with your voice.
* Hands-free phone
* Dial your phone by voice using the phone number
* Contact lookup
* View contacts with a voice command
* Have the subject, time, and location of upcoming appointments read to you
* Media player
* Program starter
* Device Status
Enable Voice Command
Start > Voice Command
Voice Enabled > Yes
Announcement Routing > Bluetooth if Available
This setting will allow Voice Command to use the Excalibur phone speaker to respond to vocal commands, if you don't have a bluetooth headset connected.
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the soft reset, press and hold the home key. This is the default Record Application Button which activates Voice Command. When you hear the beep say, "Help". Voice command will then guide you through the available voice commands.
IMPORTANT: Do not talk directly into the microphone. Hold the phone 4 inches/100mm from your voice. The response from Voice Command will take a few seconds.
A Voice Command tutorial from Microsoft is here.
Enable Voice Command with a Bluetooth Headset
With the current beta release of WM6, you need to modify the following registry settings to use your bluetooth headset with this feature.
NOTE: Your Excalibur has to be application unlocked to make modifications to the registry.
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule
The string value needs to be changed from "OEMAGW.dll" to "\Windows\vcbthag.dll".
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the phone reboots, your bluetooth headset will now be able to use Voice Command by pressing the button on your headset. Wait for the beep, then speak the command.
Viel Spaß mit Voice Command,
jromney
Click to expand...
Click to collapse
Streaming Video Player:
rvbcrs said:
Ok guys here is a .cab I made for the Streaming Media tool.. I tried it and it worked with m.youtube.com!
Let me know if it works!
Download here: http://www.ramonshare.com/files/index.php?share=4&path=TOOLS/RvBCrS_HTC_Streaming_Media.cab
Click to expand...
Click to collapse
anymore fixes please post here..
you could add those to the collection on the wiki
http://wiki.xda-developers.com/index.php?pagename=Excalibur_WM6_Tweaks
please feel free to do that i dont have the time for that...
k i done it
Thanks for the fixes. Unfortunately, none of the work for me. I have the files unhidden and apparently no files appear in my App Data/Profiles folder when modifying any of the profiles.
Also, when trying to add a new key to the GDI registry folder, I get an error message saying I can't do so. I'm using Resco Explorer's registry editor btw.
Error Message!
.PoNeH said:
Thanks for the fixes. Unfortunately, none of the work for me. I have the files unhidden and apparently no files appear in my App Data/Profiles folder when modifying any of the profiles.
Also, when trying to add a new key to the GDI registry folder, I get an error message saying I can't do so. I'm using Resco Explorer's registry editor btw.
Click to expand...
Click to collapse
My friend I had the very same problem you are having now. The reason you are getting that error message is because, your wm6 ROM got corrupted some how. what I did was, reinstall the clean wm5 ROM all over again, after that, I reinstall the new wm6 official upgrade Rom and also you will have to application unlock your device all over again! Now everything will work fine!
Reminder FIX - doesn work.
The reminder fix doesn't seem to work with the release version of WM6 for the Dash.
In fact, if you do this mod, you woun't be able to switch to "Normal" profile.
It seems if the OS determines that the profile's XML file is inavlid in some way, it will refuse to load it, and this mod seems to be invalid to the OS.
This is a BIG bug with the dash (no reminder volume setting) - I hope they release a patch for it.
UPDATE: I just found and read the full version of this fix (where you need to change the "system" attribute) and it actually now does work. I am going to try to create a CAB file to do the patch so users won't have to do all the copy to/from their PC.
UPDATE: See this page for the CAB file - http://forum.xda-developers.com/showthread.php?p=1271705#post1271705
Does anyone know how to ensure that your time is always in sync with your Exchange server? I never had this problem with WM5 but since I have upgraded my Dash's internal clock seems to have gone cuckoo. If I turn it off, and turn it back on my Dash thinks it's the same time that I turned it off at. It's like the clock just stops (would be nice if it happened in real life!)
Barring a fix, does anyone know of a utility that syncs WM time with a time server over the net using SNTP?
Edit: I found this:
http://s-k-tools.com/index.html?m_downloads.html#tsync
hope everyone is finding these fixes useful...
anthoneous said:
hope everyone is finding these fixes useful...
Click to expand...
Click to collapse
see thats why we use the wiki, so you don't need to bump
Somehow when copying back edited profile files, it does not retain System attribute on the flag, which, as already mentioned earlier, renders profiles unsuable.
Here is a simple workaround that I came across:
1) On your phone, open Vibrate profile for editing. Change something and save. This will force it to create the Meeting.Prof.xml profile file in the Profiles folder.
2) From ActiveSync, navigate to that folder on your phone and rename the file to Normal.Prof.xml
Now you can go back to your phone, open Normal profile for editing and the Reminder option will be there.
Hope this helps.
Unable to change profile
Unable to change profile?
Delete files in Application Data/Home/Profiles
then go to Start - Settings - Profiles
Switch to your desired Profile or re-customize your settings on every profile that you want
**xxxx.prof.xml files in Application Data/Home/Profiles contains the customizations made on every profile, example if you have only customized the Normal profile, normal.prof.xml will be automatically generated at Application Data/Home/Profiles.So deleting the xx.prof.xml file will revert the profile customization back to default.
Massive Fail.
anthoneous said:
please feel free to do that i dont have the time for that...
Click to expand...
Click to collapse
Massive Fail.
You've got the time to throw all of what's in your original post together, you've got time to append it to a wiki.
/Massive Fail.
Ever since I upgraded to 2.2 (rooted) i always get promted to install the verizon media manager crap whenever i plug my phone into my computer. Where can i find this file so i can delete it, so this annoying bloat does not ever happen again? Thank.
if you search, the answer has already been posted before. it's on here somewhere.
found it - thanks.
verizon media player remove
dial ##7764726
Hit Call
Type Password 000000 (that's 6 zeros)
Hit Feature Settings
Choose CD ROM
Click Disable
Hit menu, commit modifications (it will say no item changed
I have a big problem on my HTC Droid Incredible.
Bypassing the activation screen really irritates me and i can't turn on the USB Debugging which is the key to root and s-off my phone and to bypass the activation screen.
The procedure i did for bypassing the activation screen are: tap 4 corners, safe mode, call *228 and end call after few seconds (did this several times), cdma workshop, ##778 change the nam setting, and non of them works for me.
cmlusco member of xda told me that the best way to bypass it is to change the build.prop in any rom i'm going to flash on my phone. Then he give me this link http://forum.xda-developers.com/showthread.php?t=1306400 and i think this is it, but in the end still failed because i need to turn on my USB Debugging.
Please help me to bypass my Droid Incredible.
I'm here in Philippines and there is no Verizon network provider here.
I already solve this problem and I can use my Droid Incredible. Sweet!!!View the 3rd post how did i do that.
Click to expand...
Click to collapse
are you able to fix this?im having EXACTLY the same problem.
yup I already fix it, just follow this procedure.
1) try to enable usb debugging mode by doing this procedures.
for this,you should need wi-fi.
so,let's start
1)when the phone calls to *228 tap contacts icon,right to the "end call"
2)try to add a new contact and enter facebook or other socialnet dialog.
phone asks you to enable wifi, do this and connect your wifi network
3)next hold the search button and (via voice search) search in google "market"
4)tap to the official market page, phone asks you about opening this page,choose market app.login in the google accounts,if you need.
5)search in market "usb debug" app. install it and tap "open' in the market app
6)enable usb debugging and enjoy)
and for those who don't have a wifi connection in there home, this procedure is for you.
1. call *228 and tap the contact on the right side of end call.
2. add contact and put any information.
3. try to connect it in facebook to prompt the setting window.
4. tap setting.
5. tap search softkey and type application.
6. finally you can enable usb debugging without any problem.
thanks to ramazancik94 for giving this life saver step for enabling usb debugging mode.
2) root and s-off your phone by following this procedure root 2.3.4,downgrade,and s-off
3) if you already have CWM, rooted, and s-off your phone try to install some ROM using CWM in development section. Double check if your phone is s-off via hboot (press and hold power button and volume down), your phone is rooted if you install CWM, and find some ROM that suits your need.
4) Try to use the "end call bypass" if this method doesn't work with you this will be your last resort. Delete the phone.apk before you install the rom, to delete the phone.apk open the "blah blah blah rom.zip" and go to data> system app> find phone.apk and please don't extract the rom and delete the phone.apk or i won't work, just delete it from the zip.
Note: Deleting the phone.apk will result for disable your phone signal. So you're going to use your phone for music, game, watch some movies and wifi internet. You won't be able to use it for call, text and mobile data, and also please read it carefully so you won't **** your phone. You've been warned
For more information visit this thread: help bypass the activation
All big thanks to cmlusco, ramazancik94 and tiny4579 for their help
need help
sir maybe you can help me with this...im new to android phones and i dont think i can make it
can you please send me the step by step procedure of the things i need to do after i put my phone in USB debugging mode?hope you dont mind
my email is [email protected]
my tcp account is kian0926, im here in the Philippines as well and im glad that you were able too fix yours, hoping that i can use mine as well, saving this device from a trash can
many thanx in advance...
i can't get my ADB working
after i extracted mini-adb under c drive (c:\mini-adb_inc) i extracted adb inside of it
but icant get adb working
when i tried to open adb it just flashes (like blink of an eye) and closes itself immediately
i cant proceed
pls help..............
Kian0926 said:
i can't get my ADB working
after i extracted mini-adb under c drive (c:\mini-adb_inc) i extracted adb inside of it
but icant get adb working
when i tried to open adb it just flashes (like blink of an eye) and closes itself immediately
i cant proceed
pls help..............
Click to expand...
Click to collapse
You cant just click on the adb.exe file, it is a cmd line program. Open a cmd prompt on your pc and type " cd C:\mini-adb_inc " then type in your adb command, example " adb devices " this should show the serial number of your phone if connected to the pc and adb and drivers are setup correctly.
thnx for the reply
but this " cd C:\mini-adb_inc " seems to be invalid when im trying to enter n the command prompt window
i already tried removing those that i downloaded and download them again but still the same thing...
---------- Post added at 02:19 AM ---------- Previous post was at 02:11 AM ----------
also inside of mini-adb extracted on my c drive theres no adb.exe.it just say's adb
under that is AdbWinApi....so cunfused now
Kian0926 said:
thnx for the reply
but this " cd C:\mini-adb_inc " seems to be invalid when im trying to enter n the command prompt window
i already tried removing those that i downloaded and download them again but still the same thing...
---------- Post added at 02:19 AM ---------- Previous post was at 02:11 AM ----------
also inside of mini-adb extracted on my c drive theres no adb.exe.it just say's adb
under that is AdbWinApi....so cunfused now
Click to expand...
Click to collapse
What makes you think the cd command didnt work, did it give an error? All cd does is change the directory to C:\mini-adb_inc where the adb file is located. It is ok if it says just adb and not adb.exe, your pc is just set to hide extensions. When you first open the cmd prompt to the left of where you type it will say something like C:\users\your_user_name\desktop >, when you type cd C:\mini-adb_inc it should go to the next line, and to the left of where you type now it should say C:\mini-adb_inc >Then type adb devices and see if a serial number comes up.
"C:\users\your_user_name\desktop" his is what i exactly saw on my laptop and when i tried enterring "c:\mini-adb_inc" a message appears say's like "incorrect path/directory"
im gonna try using another PC and hope this time it works..
Kian0926 said:
"C:\users\your_user_name\desktop" his is what i exactly saw on my laptop and when i tried enterring "c:\mini-adb_inc" a message appears say's like "incorrect path/directory"
im gonna try using another PC and hope this time it works..
Click to expand...
Click to collapse
You have to type " cd C:\mini-adb_inc " or what ever the path is to the adb file. here actually try this. Go to the folder where the adb file you unziped is. Then hold ctrl + shift and right click on an empty space in that folder, and select open cmd prompt here. then type in your adb command, ie adb devices.
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Kian0926 said:
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Click to expand...
Click to collapse
Sorry to say, but if you cant enter hboot, or boot up to the os or recovery, then the phone is more thsn likley bricked. Unless its a battery issue. Does it vibrate at all when trying to start?
Kian0926 said:
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Click to expand...
Click to collapse
Does it boot when plugged in? There MAY be some help if it can boot when connected to AC power.
Kian0926 said:
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Click to expand...
Click to collapse
I've experience this, just a blinking orange led. What did I do was i charge it and a couple of minute the the blinking orange led stops and it become a steady orange led.
Easier way (offline)
Found what could be an easier way, I'm playing with my sister's incredible and I can get usb debugging enabled by using any of the official verizon update packages (could be a rom, but I downloaded the smallest hboot upgrade from htcdev), it appears to send some commands in usb mode that trigger the activation of usb debugging, what's funny if that if you either disconnect before it's done, or it fails, it leaves usb debugging on.
Non-sense.
EDIT: You just have to open the utility, you don't to flash or disconnect.
Such and old thread but I have a Incredible that a friend gives me and I couldn't access the market app by search function. What I did was search anything with voice commands, then a navigator window opens and change the URL to: market://details?id=usb, it opens the market app and I can install the USB debug app
Simple method, without the use of USB Debudding/rooting flashing:
Go to Emergency dialer,
Enter ##778, and press 'call'
Select 'Edit Mode'.
Password is: 000000
Select 'NAM Settings'
Make the following changes:
MDN = your 10 digit phone# (0000000000)*
MIN1 = your 7 digit phone# (0000000)
MIN2 = the area code of your phone# (000)
Press the 'back' key and go to 'HOME SID/Home NID' settings
Select 'Home SID/NID #1', and change the first value to '189' (Leave the 65535 alone).
Now press your 'menu' key
Press 'commit modifications' "button"
Phone Should reboot now.
Changing MDN using cdmaDevTerm
In some phones MDN cannot be changed, in this case you need to connect the phone to the computer as a "modem" device, and use the opensource cdmaworkshoptool / cdmaDevTerm from here:
http://code.google.com/p/cdmaworkshoptool/
Connect the tool, select manually / automatically the COMPORT for your HTC device, Read from device, Change the MDN to 0000000000 Select write
Disconnect and reboot your device.
It should now by pass the activation.
most of the ref. from
http://androidforums.com/incredible...g-activation-screen-no-service-available.html
I got my Note 2 today and loving it but I'm having trouble setting up my google voice. After installing and re-installing the voice app during set up I get an error message saying "Forwarding number change failed". I have also tried to do it manually by typing in *004*(11 digit #)# and the system gives me an error message saying "emergency calls only". I've tried to re-setup my number through google's web site with no success. Any ideas?
Thanks in advance!!
ATT
4.1.1
I followed the instructions here and it works fine now (post 3 from link I'm not allowed to post). I didn't get the forwarding number change failed message.
1. Go to Google voice on a browser (can't post link)
(If you don't already have a phone set up on the website, set one up)
2. Press on "Show advanced settings"
3. Next to "Forwarding Options", press "Activate"
4. Follow the instructions
(Enter *004*Yourgooglevoicenumber# into the dialer and enter)
5. If you get the confirmation, tada! When you go into the Google voice app, it'll automatically go past the setup due to it detecting it already being set up. Now you are ready to start receiving your voicemails via Google voice.