ok, I have an o2 orbit running WM5, and everything has been going fine..not had any problems since I installed the SD card corruoption app, and I've not even changed the apps running on it for 2 months as everything was just perfect.
but, I've been reading that WM6 would be faster (I do get the occasional hang while the machine trid to catch up with what I'm doing), so I am thinking about the upgrade.
however, a lot of the posts I've read seem to indicated that I need activesync 4.5. I've tried this at least 3 times in the past, but it refuses to work on my machine and each time I have to go back to 4.2. Bsically the application on my pc locks up, never connects to my device and I have to end the application.
so, do I really need 4.5 to upgrade to WM6...and then again..do I really need WM6...is the improvment that much better?
yes, you need it
ok thanks...I guess no upgrade to WM6 then. AS4.5 just refuses to run on my machine
You only need it to sync with your pc. I use 4.5 at home but don't have it at work so I use WM5storage to transfer files to and from my works pc
that's just it though, 4.5 wont sync with my device...it just hangs.
Problem is quite simple, vista rarely (lets say once in 10 days) "see" the connected BA, since I dont need much of syncing I didnt investigate that too much but if someone solved the problem I would appreciate eventual help.
(its WM6)
ty & BR to community !
suprisingly BA synced with the vista like the charm when I used BT...
Had so much problems with BT sync before with XP and WM 2003 and 5 that I didnt even think about trying that with vista
Anyway BT sync works GREAT for me (WM6 and Vista) and that is the nice solution.
Do you use the Windows Vista cync centre, or do you still have to use activesync?
In my experience both the cync centre and Windows Vista have no problem seeing my blue angel, but when I change any of my contact/task/calendar information, even though it looks like the two are syncing, no changes are made to either device as necessary.
hi, its was an old issue but as far as i could remember, i used to install nod 32 internet security suite which had firewall inside (wasnt mentioned anywhere in the installation) which silently blocked my BA sync... found it by pure coincidence, after the uninstall everthing synced perfectly...
Hi,
I have a strange problem. I have a Hermes running WM6 (org T-Mob). I can't install software or explore the device from my PC at work. It's possible to sync files, email and almost everything else (exception: I have Pylon Pro running to sync with Lotus notes Shows it's synced but no data is transfered) but other than that I can't contact the device. Explorer shows no contents and when the software window opens all I get is the frame with no content. I had WM5 running und upgraded in the hope of solving this problem but no go. Activesync works fine with my old device (MDA II) running WM2k3SE but not with the hermes. It also works fine at home running the same configuration. Here are the stats:
Hermes with original German T-Mobile WM6 Rom
Activesync 4.5
Windows XP Professional
Has anyone had a similar problem? Any suggestions? Our IS&T department can't find a solution.
Cheers
datas_brother said:
Hi,
I have a strange problem. I have a Hermes running WM6 (org T-Mob). I can't install software or explore the device from my PC at work.
---
It also works fine at home running the same configuration.
Click to expand...
Click to collapse
If it's working on your home machine it's unlikely to make a difference, but I find this - http://toril.ru/pda/akrndisadd.exe - very helpful when activesync stops working, and it's non-destructive (so it's worth trying).
Geoff
Hi,
Problem is now solved. I did 2 things:
1. Made it Super CID
2. Ran the small prog from the post above.
I'm not sure which solved it but one of the 2 did.
Thanks for the help.
Cheers
DB
Hi,
I take back what I said in my last post. The problem is solved but it has nothing to do with the 2 things I mentioned above.
T-Mobile sets "Settings>Connection>USB to PC>Extended Network Functions Activated" to on by default. Unchecking this box is what solves the problem.
It seems that with this active, Activesync tries to look on the LAN for certain components, which it cannot find. This causes the communication between Win. Explorer and the MDA to not work. It also stops you from opening the "Software" funktion in Activesync (You only get a frame with no contents and the hourglass).
I hope this helps someone. It certainly caused me allot of headaches.
Cheers
DB
hey guys i am not to sure if this is supposed to go here but can anyone tell me why my phone is unable to sync contacts and file with activesync 4.5
more details? what device, what rom? what OS?
i have tried many of the new roms including most of the manilla 2d roms on here i am currently trying tot do it with crc 13 stable and still no joy on a Rogers Htc TYTN
still not enough info, what OS are you running?! what error are you getting when trying to sync?
Activesync 4.5 problem
I'd like to jump into this discussion. I also have a problem with Activesync 4.5 recognizing and connecting to me Herm200. The oddest thing is that it has functioned correctly, but for some reason it isn't any more. I have two of the same device and it is the same for both. I also have a Wizard (T-Mobile MDA) and that device has no problems what so ever connecting.
Here are the specs of the OS installed on the Herm200:
WM5 ROM version 2.11.255.1
Radio version 1.38.00.10
Protocol version 32.71.7020.12H
ExtROM version 2.11.255.102 installed.
Any assistance to resolve this problem would be greatly appreciated.
Try: start menu>settings>connections>usb to pc and uncheck the checkbox
Maybe it sounds bizarre, but also try a different cable, in a different usb port, turn off your computer firewalls, and try cleaning your mini usb on the phone. I got a piece of dirt in mine and nearly tore out my hair until i got it fixed. I had a cable go bonkers, which gave me a lot of grief, and one time the usb port decided it DIDNT like my phone anymore
Plus, for some reason i have to diable the firewall everytime on nod32 until i can connect.
Hope one of those helps....
-Jotek
I have the same problem... T_T
nasty_42 said:
Hope you can help me..
I just bought a Softbank HTC X01HT, when i connected it to my PC, Microsoft Activesync cannot detect it. But my HTC is charging.
What I did:
1. I am using a new USB cable, tried another USB cable = no success.
2. Tried to sync to another PC = no success.
3. Uninstalled Microsoft Activesync, reinstall Activesync = no success.
4. Did some research, uncheck "Enable advanced network functionality" = no success
5. Hard Reset = no success
6. Connection Settings --> Connect = "Your device was not detected"
COM 1 = Available
COM 2 = Not installed
Infrared Port(IR) = Not installed
USB = USB is available
and it gives the beeping sound (sound you get when you plug in your USB) but nothing happens after.
Btw, im using WM 6.1 Pro.
My Bootloader shows:
HERM200
IPL-1.04
HERM200
SPL-2.03
I'm losing hope.. T_T Hope someone can help me. Sorry for being such a noob. >.<
Thanks in advance!
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=441298
I have had real buggy Active Sync problems only with the last 2 ROM's I've flashed, Joshkoss's V.10 and PDA's V.27. Both are using build 20759 which I think is the culprit for me.
boog321 said:
Try: start menu>settings>connections>usb to pc and uncheck the checkbox
Click to expand...
Click to collapse
thanks for the help man, doing this actually worked for me, one thing that i also had to do was restart both my computer and my phone before it would work.
By the way i am using CRC 13 on my HERMES
mikehippe said:
I have had real buggy Active Sync problems only with the last 2 ROM's I've flashed, Joshkoss's V.10 and PDA's V.27. Both are using build 20759 which I think is the culprit for me.
Click to expand...
Click to collapse
Oh my..., now I'm the only one that has the Activesync Problem. T_T
Two ROM's that I am using.. Pays ROM Lite & Full - WM6.1 WWE with Big Storage and 27/10/2008 ROM 3.62.502.20 (Manila2D) V.20 Build 20921 by PhamQuang.
What ROM can you suggest to test the Activesync problem? Thanks in advance..
If I'm using a usb cable to connect, how might this remedy the problem? I did try what you have suggested without success.
nasty_42 said:
Oh my..., now I'm the only one that has the Activesync Problem. T_T
Two ROM's that I am using.. Pays ROM Lite & Full - WM6.1 WWE with Big Storage and 27/10/2008 ROM 3.62.502.20 (Manila2D) V.20 Build 20921 by PhamQuang.
What ROM can you suggest to test the Activesync problem? Thanks in advance..
Click to expand...
Click to collapse
try using the crc 13 that i used but if it doesn't work right away try either checking or unchecking the box in usb to pc for enabling advanced network functionality
maybe its installin drivers on the computer possibly? because the sound made generally is a new hardware detect just my 2 cents
Just a thought but it may be the version of Office / Outlook being run. I've been running office 2003 w/ outlook, Active Sync 4.5 with my Hermes 200 on the original AT&T 6.0 for the last year without issue. My company recently upgraded everyone to Office 2007 and ever since my Active Sync has had nothing but issues with syncing especially over blue tooth.
Active Sync and 2007
Heykrop said:
Just a thought but it may be the version of Office / Outlook being run. I've been running office 2003 w/ outlook, Active Sync 4.5 with my Hermes 200 on the original AT&T 6.0 for the last year without issue. My company recently upgraded everyone to Office 2007 and ever since my Active Sync has had nothing but issues with syncing especially over blue tooth.
Click to expand...
Click to collapse
Same here, I have a laptop that runs 2003 Outlook and that works fine, but 2007 - pah what a waste of time. Shame as I really like 2007, maybe it is better on Vista ?! Doing some reading around the web seems to suggest that syncing with 2007 is hit and miss. Works for some not for others, seems like MS strike again !
I'm running outlook 2007 and hosted exchange 2007 through infoquest. Not having any issues either way. May be you can post the error codes you get on active sync, I did have to enter some registry fixes on my laptop but it hasn't given me any issues.
Can't speak for anyone else but if I try to sync with Outlook 2007 all that happens is it goes into a weird loop syncing blank entries continually. Last time I tried I had over 300 blank contacts in Outlook and none of my Outlook contacts on my device ! No messages nothing. That of course is when it does anything, if I delete the pairing then quite often when I plug it back in it will repair and then do nothing ! I now use my laptop to sync up as it works with 2003 reliably.
I noticed the following thing: When using a rom cooked with a build above 20755, syncing under Vista is a challenge. It works when... it works. With a build equal or before 20755, it works like a charm. I flashed back and forth with 2 different builds. No programs installed. And I get the same results. Could it be related to some differences in builds?
I have just moved from a T-Mobile TouchPro2 (US Model) to an Orange TouchPro 2 (UK Model).
The T-Mobile was WM6.1 and the Orange is WM6.5 and both ROM's are stock.
On the T-Mobile ROM I was able to sync my Contacts & Calender with my works issue XP laptop running Outlook 2007.
When I set up my new Orange TP2 on the same laptop everything worked fine for about 3 days. Now when I connect I get a message saying I will only be able to view files etc. No sync is available and the message goes on to advise me to install MS Outlook. Of course Oulook has not been removed.
I deleted the sync partnership on the TP2 and tried again with no success. I re-installed activesysnc and this worked but only for about 5 connections. I now get the same message.
I still have my T-Mobil TP2 and did some testing with that but I can not get it to fail. When I retest with the Orange TP2 it fails within 5 syncs attempts.
Is this a known bug in WM6.5? I have searched the forums and there is a lot of info regarding problems syncing to Exchange (Push mail) but I do not use that service or connect in that way.
Any help appriciated.
does no one else see this problem?
I've noticed a similar issue when connecting my Tilt2 to my Windows 7 laptop. It will sometimes only connect once per boot. In other words I can plug it in and it will connect. But when I unplug and replug, it will make the little "USB Connect" sound but not actually connect. After rebooting, it will connect again.
Windows Vista and 7 use a slightly different method of syncing than XP (Windows Mobile Device Center). I've noticed that if I set up a named partnership in WMDC it seems to give more reliable connections.
I'm not sure that really helps your situation but at least know that you're not alone in sync wonkiness.
Similar problem running Activesync 4.5 on old Windows 2000 work laptop (don't ask ) Current ROM NRGY Phoenix 2 16 Jan 21889 Titanium build. Seems to be specific to some ROMs, but cannot for sure say which branch works better for Activesync.
It doesn't appear to be a common problem. But since I had never seen it before I started using WM6.5 I was sure it was a bug in the ROM. It's a real pain in the ass when it happens as you have to delete the sync partnership on the phone before it will reconnect. Then you have to set up all your favorite contacts and speed dials all over agin. I have just started a new job here and I am adding 3 or 4 new conacts every day at the moment so couldn't have happened at worse time. Might be time to try a cooked ROM.
TP2 Activesunc won't recognize Outlook - WM6.5
Have had this same problem now for over a month. Have been syncing Activesync v4.5 with WM6.5 on TP2 for over a year previously. Transitioned from MSO-2003 to MSO-2007 with no sync issues. Fresh install of MSO-2010 and TP2 will mo longer recognize that my computer has MS-Office installed. have not found solution anywhere to date. Appreciate any updates from other with any solutions ....
Regards,