Case and screen protectors. - P3300, MDA Compact III Accessories

Looking for the best place to get some screen protectors to suit my Orbit. Looking for specific ones, not the generic 'cut to size' ones. Can anyone point me in the right directions please?
Also, can anyone recommend a good case to keep the orbit in? Mainly used as a mobile phone, so quick access needed, not looking for a PDA type wallet. Are those silicone sleeves any good?
Thanks.

I have a silicone case for my P3300. It does its job and prevents scratches to the case, whilst giving easy access to the hardware buttons and stylus.
The only problem is that it gets covered in dust and dirt very quickly, and it's hard to remove these by hand. The best method to remove them is by washing it in warm water.

Brando screenprotectors are the best in my experience. I've used some other before, but none were as durable as Brando's. I now have a 3yo Brando Anti-Glare screenprotector on my device (used it at my HTC Magician before) and it still is good quality. I've recently ordered a Brando Ultra-Clear to see the difference (it's supposed to be clearer and smoother, but doesnt have the anti-glare-layer), hope to get it today so I can compare them both.
Their website is: http://shop.brando.com.hk/ and the screenprotector costs $10 + $3 worldwide shipping. Their service is excellent, I ruined my first screenprotector a bit, asked for advice by mail and they sent me a new one, free of charge.
Edit: just received it, it's a lot clearer and if the glaring doesnt bother you that much (it's the same as the original screen without protector) I'd really recommend it.

Related

Case Recommendations

Hi,
What case do people recommend to keep their Orbit safe? I'm stuck between the Krussell (which I have protected phones with before) , a silicon case (ebay item number 160068404562) or PDA Leather Flip Case (ebay 160068463414).
I'm tempted for the silicon as you still have easy access to the screen , but welcome any other ideas.
gavinlew said:
I'm tempted for the silicon as you still have easy access to the screen , but welcome any other ideas.
Click to expand...
Click to collapse
Before reading your question, I was not aware of the existance of a silicon case for this model. Now I've looked it up at Ebay and am also interested. A couple of months ago I bought a silicon case for my mp3 player (different brand though, ZCover) and am very pleased with it. So far however, the seller seems only to ship within the UK. I have just asked him by email if he is able to ship abroad, no answer yet.
Update: he does sell abroad. Apparently he has more than one item on Ebay, all about this case but with different shipping methods. Anyway, I just ordered a black silicon case, due to arrive later this week. I will let you know.
hi
i have the PDAIR flip case and am very pleased with it. i prefer it to a silicon type as it gives the screen more protection.
I agree that a flip case does give more protection, especially to the screen, but isn't it annoying when actually making a call? I presume you don't take the phone out of the case before calling. To me it looks rather silly. NOFI.
Have a look for the aluminium (on ebay, under artemis/p3300) case for the artemis as I have just ordered one and hope it is a good fit for the orbit?
Not massively protective but the slipcase supplied with the 8oGB ipod is a perfect fit. I'm using it just now to avoid scratches until i find a good screen protector and silicon case.
JC#79 said:
Have a look for the aluminium (on ebay, under artemis/p3300) case for the artemis as I have just ordered one and hope it is a good fit for the orbit?
Click to expand...
Click to collapse
has your aluminiun case arrived, How much extra bulk does it add, as I'm thinking of getting one. I already have a black silicone case which is very good, and a very tight snug fit, but no protection for the screen. If the aluminium one is not to big, then I would sell my silicone case.
Yes my aluminium case came through the same day as my last post and it does not add much bulk to the device. The only issue I have had with it is the stylus is covered slightly so to remove it you have to open the case and slide the phone up slightly. Apart from that great case would recommend highly to all those in need of a case. My case came in a Pdair box so I assume it is made by them?
I also have the leather PDAIR flip case and my only criticism is that it extends a little to much toward the sides of the base of the screen so that I must angle the stylus a bit at the edges.
mungosdad said:
I already have a black silicone case which is very good, and a very tight snug fit, but no protection for the screen. If the aluminium one is not to big, then I would sell my silicone case.
Click to expand...
Click to collapse
I just had a look at the aluminium cases sold on Ebay but they don't seem to have protection for the screen as well? How is that different then?
Just like you, I ordered a silicon case last week and it arrived a couple of days later. I'm pleased with it, pretty tight fit, better grip, no chance anymore of scratching the camera lens when the phone is on it's back, and all the required openings are exactly on the right spot. Indeed, the only thing left is the absence of protection for the screen, but I don't carry the phone in a pocket together with keys or coins.
The aluminium case has a plastic screen in it to protect the orbit. You have to open the front cover to use the touch screen.
All of which is not a problem as I would advise anyone with a phone of this quality to purchase a screen protector ASAP.
I didn't use my orbit till my protector came through the post.
Hi All
I spoke to the lady in the O2 shop in Swindon about cases, she said that O2 will be releasing some Orbit specific ones in the next couple of weeks.
I have my fingers crossed.
Rich
JC#79 said:
I didn't use my orbit till my protector came through the post.
Click to expand...
Click to collapse
The slightly scratched, fingerprint smeared and dusty state of my just-over-a-week-old Orbit screen would probably give you a heart attack then! Screen protectors don't come cheap, £10 for little sheets of sticky plastic... selotape is under £1 a roll! I'll just use some of that!
Has anyone on their internet travels come across a vertical leather pouch/holster for the Artemis that has a belt clip?
Something like this:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=21740
Just want something that can be attached to a belt and the Artemis slid into and out of - not for use in the actual case.
Must be vertical and minimal size (ie designed for the Artemis and no larger).
Krusell Vertica with Multidapt® - S-Wide
Selotape aside I'll almost certainly be going for http://www.pielframa.net/pielframa_productos.asp?id=1685 (mentioned on the other case thread) if I ever bother getting a case... can't beat something made-to-measure!
Just got myself a Piel Farama in black for my Jasjam. Looks very good and high quality but certainly requires getting a bit used to as each time you have to open the flap and fold it all the way back to get a hold of the device to take or make a call.
regards
Thanks Moleshome - that is exactly what I am looking for except my only concern (as with all "multi" cases) is that it will not fit it nicely and/or be the smallest possible case for the dimensions of the p3300. I can't think it fits all of the listed "compatible" models perfectly and I don't know if the Artemis would be in that category.
Anyone bought this particular case? Experiences?
Got my Piel Frama case today - it fits the Orbit well despite being designed for the P3300 (sharper corners).
Overall a beautifully crafted case which I will probably return as it won't let me store a credit card in the flap. My last case for the XDA Mini was a Krusell - hope they bring out an Orbit sepcific case soon....
strongp said:
Overall a beautifully crafted case which I will probably return as it won't let me store a credit card in the flap. My last case for the XDA Mini was a Krusell - hope they bring out an Orbit sepcific case soon....
Click to expand...
Click to collapse
No good for spontanous gprs internet shopping on the go then?
I dropped an email to see if I could get one for review, fingers crossed otherwise I'll have to fork over some mulah or see what my birthday holds. (I've been a games/tech journalist for a while, which is nice)
Would be interesting to get a comparison of the Krusell and Piel cases, and maybe something a bit more on the minimalistic size. I'll see what I can do, but neither are contacts I've dealt with before.

Cases

Anyone know if there are any available cases? I think I'd really need one
I was going to grab an invisible shield myself, I've had cases for phones before but I find the HTC Aria is definitely pocket size.
got one
i got a soft gel case from att today when i picked up the phone, however there were no screen protectors available at the store... pity she has such a nice screen...
I grabbed a set of generic screen protectors from the Rat Shack today. I used a hole punch to make a hole for the optical trackpad, and then carefully trimmed the sheet to size. The standard single hole punch is exactly the right size for the trackpad.
robonoob said:
i got a soft gel case from att today when i picked up the phone, however there were no screen protectors available at the store... pity she has such a nice screen...
Click to expand...
Click to collapse
any idea of the brand on that gel case. there wasn't any at my store
amzer has a bunch of cases being released 7/13 according to their site
I didn't pickup a case from the AT&T for the outrages price they want for it. In fact, I don't think this phone needs a case since the back is virtually indestructible. However, I need a screen cover fast.
The gel case is decent, but I'm not sure it need it since the only part of the phone it covers is the soft touch part. The AT&T stores got screen protectors, but the package doesn't say Aria on it. It says HTC (model# I can't remember). The only carried protectors for the Fuze, Tilt 2 and the Pure so the other HTC one should be it. It's a 3 pack for $9.99.
The AT&T store I went to had cases and protectors. Case was expensive and didn't look necessary, the back cover feels very solid.
The Screen protectors are labeled as "Compatible with HTC A6366," product code 888063373688
i like the gel type cases(as long as they aren't too thick) for some shock absorption
case and screen protection
ok so it was a branded att case, no specific maker of the case, i did some research and it seems the Aria is basically a droided HD mini with a trackpad, so the measurements are the same as the mini, Zagg makes a full kit with screen and back protection, use a hole punch for the track pad and all is well, i will be getting my kit within a week or so i will keep you guys updated...
robonoob said:
ok so it was a branded att case, no specific maker of the case, i did some research and it seems the Aria is basically a droided HD mini with a trackpad, so the measurements are the same as the mini, Zagg makes a full kit with screen and back protection, use a hole punch for the track pad and all is well, i will be getting my kit within a week or so i will keep you guys updated...
Click to expand...
Click to collapse
I almost forgot it's pretty much the same casing as the HD MINI! I just ordered a nice cheapie case on ebay! lol
I'd post the link, but I'm not allowed to yet as a new user =P
wish HTC or other company make some nice case for it.
ok so i have to retract part of my previous statement, the case is actually made by htc, i didn't notice the imprint at the bottom, so HTC does make a case for it, probably the same as the mini's.
http://store.cheapdroids.com/HTC-Aria-Accessories//
engunneer said:
I grabbed a set of generic screen protectors from the Rat Shack today. I used a hole punch to make a hole for the optical trackpad, and then carefully trimmed the sheet to size. The standard single hole punch is exactly the right size for the trackpad.
Click to expand...
Click to collapse
I did exactly the same thing 3 days ago.
To make it easier i placed the screen protector on the phone so it overhung the entire thing, then flipped it over and trimmed the excess off with a razor blade. Finished it off by cutting out the protector that was covering the speaker.
PDAir has some decent looking cases for the HD Mini that I think would work GREAT for the Aria:
http://www.pdair.com/catalog/index.php?cPath=10100000_900000_11000908
I'm especially a fan of THIS one:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000908&products_id=28681
Of course, if you're not a cheap bastard like me, and prefer rich, European styling, THESE are some incredibly sweet cases:
http://www.pielframa.com/htc-touch-hd-mini-cases.htm
Regards,
Corporate Dog
EDIT: Oh. I also found this cheapie, which strikes me as somewhat similar to the PDAir case I highlighted above:
http://www.netimes.com/shop/flip-case-with-belt-clip-for-htc-hd-mini-htc-photon-p-2672.html
I think this is the case I'll probably be getting, but my IDEAL case would be a rubberized/silicone/plastic, form-fitting shell, with a detachable belt clip on the back. I know the shell cases are a dime-a-dozen, but I have yet to find one with a belt clip. Anyone know of any?
Knifey said:
The AT&T store I went to had cases and protectors. Case was expensive and didn't look necessary, the back cover feels very solid.
The Screen protectors are labeled as "Compatible with HTC A6366," product code 888063373688
Click to expand...
Click to collapse
Thanks for the info on that, but my back cover (the top left corner) is loose for some reason, so I'm afraid it'll come off soon. I also realized that the back is the antenna for the phone (two pins in the case that connect to the phone, and no signal when back is off). So, I think I'll get a screen protector and a cheap gel case. Thanks all.
Hi there! This is a fun thread. Don't have to think TOO hard!
If anyone has actually bought and is delighted with a case please let me know!
I am really looking for a black rubberized (non-skip) case that goes all the way around the back, up the sides.
I wish there was like silicon case, but actually out of thicker, less flexy rubber.
Kit is up on Zagg's site.
Just ordered one. May opt for a gel case for the back end instead of the full kit...when they're available. All I'm seeing are "Available 7/27" or "Ships in 1-3 months" or something every time I try to order an actual case. I guess I'm stuck waiting?
according to the amzer site http://www.amzer.com/HTC/HTC-Aria-accessories.htm the jelly silicone cases are available now. i wonder if they show the screws like the argyle ones do.

Best Brand for screen protectors?

Anyone here that has owned a capacitive touch screen, please feel free to chime in with which screen protector you liked the most!
Im looking to buy a protector that doesn't impede the touch experience & image quality of this amazing screen.
Also a warning against bad brands would be appreciated. I Believe Zagg/Invisi shield has already been established as a bad buy.
As another discouraged zagg user, I recommend buying cheap packs off of ebay. They usually are smooth and clear, but they get damaged every 1 or 2 months for me, but that's no problem as they were cheap and I just put a new one on. All the expensive ones seem to have a problem with clarity or feel, but if anyone else has a suggestion I would like to know too.
I'm going to wait for gadgetshieldz to come out with one. They may be coming from India, but their customer service is actually good when I needed another front screen skin for my Tilt 2 because the cut was slightly off. They mailed me an entire full body set within no time. Plus they're reeeeally cheap (Tilt 2 full body set was 6.99 - some discount percentage that was floating around) and lasted me almost the entire lifespan of my phone (Switched from Zagg).
Ok, but how does it feel? Is it smooth to swype as the glass screen beneath it? Clarity?
I use BodyGuardz for all of my phones (started with iPhone 3g -> Blackberry 8900 -> Blackberry 9700) and have not had a problem with them. Did not affect the touch capabilities of my iPhone 3G and kept the screen nice and new underneath.
caelestis2 said:
Ok, but how does it feel? Is it smooth to swype as the glass screen beneath it? Clarity?
Click to expand...
Click to collapse
I haven't used it on a capacitive screen, so I wouldn't know how it actualyl performs. But it's a lot smoother than the Zagg shields I've had before on the phone and iPods and such. The screen protector on my Tilt2 looked great, didn't skew the image at all. I eventually had to take it off though because resistive touch screen + skin = bleh. Pending user installation, you can hardly tell it's there.
nice, ill deff look into bodyguard n gadget shield. next question is, should i put the film all over my phone or just get a case n only use a shield on the screen.
guess what im sayin is: Is the film covering the screen and body enough? id really rather not add the bulk of a full blown case to my device.
p.s. heres another site with protectors that someone vouched for here
http://www.bestskinsever.com/
I started with Zagg, but have moved to BodyGuardz for my last 3 devices. They are the same quality, but for the same price as 1 Zagg sheild, you get two (2) BodyGaurdz protectors.
Currently using BodyGaurdz on the following products with no problems to report:
HTC Tilt 2 (Touch Pro 2)
HCT Pure (Wife's Phone)
Zune HD
soon on the Samsung Captivate
The real question is when will SwitchEasy-like devices come out that snap around the phone, like what the iPhone has???
is switch easy the ones that are relatively thick? Also, no one offered any insight yet on my question, do you think a case is necessary or will just a film covering over the phone be enough? I really like how sleek this phone looks and dont really want to add to its dimensions.
All I know is I had accidentally thrown my iPhone into some pavement and without the switch easy case, it would've been SOL.
Just look at their website. The cases fit like a glove and are very seamlined (They are not big and bulky like otterbox)
wow those cases look amazing. i would purchase something like this in a heartbeat for the captivate. its not thick, it holds the phone together great, and it looks comfy on the hands. Ima shoot them a letter requesting a skin for the att captivate. maybe if more people do they will consider it. So far it looks like they are only doing iProducts cases tho.
Here's a link:
http://www.switcheasy.com/
if anyone knows of a company that does cases similar to this and support a wider range of products, plz post it here.
Yea, they're awesome cases. They protect it great but don't add a ton of bulk.
They're i-Product only though, as you found out. That's why I was asking if anyone knew of something similar here.
boxwave.com[/url]
I've had their antiglare protectors on all my phones, great for capacitive touch. I'll probably NOT go antiglare on the Captivate because you do loose some picture quality with the antiglare. $13ish for a single one, $25 or so for a 3 pack. That site also has a lot of other nice cheap accessories, like cables/chargers etc. I have on of their cases on my ipod though and don't care for it. Just don't like neoprene style cases.
wait what? You probably will go with antiglare because you lose some picture quality? This seems counter productive.
i know thats probably not what you meant to say. I'm hoping what you meant to say is that you wouldnt go anti glare? idk
systoxity said:
wait what? You probably will go with antiglare because you lose some picture quality? This seems counter productive.
i know thats probably not what you meant to say. I'm hoping what you meant to say is that you wouldnt go anti glare? idk
Click to expand...
Click to collapse
You are correct sir, edited post.
Just get the casemate protectors from at&t they are $10 and you get 3 to a pack. The are clear and perfectly cut, you also cannot beat the convenience.
moosefist said:
Just get the casemate protectors from at&t they are $10 and you get 3 to a pack. The are clear and perfectly cut, you also cannot beat the convenience.
Click to expand...
Click to collapse
None in stock when i purchased the phone today.
How do you rate the following full cover skin.
-Zags
-Best skin ever
-Gadget shield
Sent from my SAMSUNG-SGH-I897 using XDA App
sl8125 said:
How do you rate the following full cover skin.
-Zags
-Best skin ever
-Gadget shield
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
zagg is badd

My TPU Fusion Review

So I ended up wanting a MT4G case and came across this site through a friend who bought a similar case from ambitronic.com.
Wondering whether to get the TPU Fusion Case? Look no further!
Shipping:
The product came relatively fast. When I got my final order, all they allowed was first class shipping, but it was only about $3. I ordered my product on Saturday, was notified that it shipped out on Sunday, and it came on Tuesday afternoon.
The website said that it was "delivered" on Monday when I checked, but when I went to check the UPS tracking number it just said sorted. So if you're wondering why the case hasn't come, check the UPS site and be patient, it's worth it!
Pricing/Value:
This is where the product shines. The case was only $3.40, and I bought a $0.95 screen protector with it. I also used a promotional code that docked off 10%. Unfortunately, shipping was $2.95 (still not that bad for first-class), so my total came out to be $6.87.
The Product(s):
I bought two things:
The Black TPU Fusion Case, and
a MT4G Screen Protector
The case itself is pretty good. All the holes are in the right places, and it fits really well. It does not add any noticeable bulk, and although it was somewhat difficult to get it on my MT4G in the beginning, it gets easier as time goes. The side grips are really nice (they're textured for easier grip), and I have 99% confidence that I won't break my phone as long as I have this case (the other 1% is if I keep it in the washing machine ). I had an issue with the power button being too hard to press at the outset, but as time went by, the issue got better and it's much easier to hit the power button.
Note: The TPU Fusion cases for this product only come in Black (+$0.45), Clear (+$0.45), and Red. I got the black one, and it looks really sleek on my black MT4G.
Now, the screen protector on the other hand was not useful at all. The product said that it would come with a soft card, but it did not. The thing also did not come with any instructions, so I ended up having to check how to install it on XDA. After cleaning the glass screen with the microfiber cloth and applying the screen protector, there were too many air bubbles, and I realized that the screen protector collected dust quite easily. I ended up having to trash it.
Overall:
4.75/5
Great product, great company.
-0.15 for the worthless screen protector
-0.10 for only 1 shipping option (shipping ended up being about 45% of the cost, but it was relatively cheap, so I can't complain too much).
Get it here.
------------------------------------------------------------------------------------------------------------------------------------------
So I shot them an email, and here's what I got:
Hi, thank you for your honest opinion on our product and service. Your support is really important to us. We have just issued you $0.8 credit (Rounded it up) via paypal.
Regarding the screen protector issue, it used to include a soft card inside the package but it seems our supplier did not include it in this shipment. We have removed the word "soft card" from our description to avoid being misleading.
If you did not get another screen protector for the Mytouch 4g yet, we would like to re-send you the screen protector for free. Hopefully, this time it can do its job. Please let us know and have a good night!
Sincerely,
Dale
Click to expand...
Click to collapse
What great customer service!
Nice review! Thanks for posting this.
Sent from my HTC Glacier using XDA App
I have the same one. Best. Case. Ever.
For the price its a great case but the trident Cyclops case is the best case
Sent from my HTC Vision using xda premium
+1 this is a good case for the money. My only issue was had to enlarge the hole for the charging micro usb port, for use with my charger.
LBN1 said:
+1 this is a good case for the money. My only issue was had to enlarge the hole for the charging micro usb port, for use with my charger.
Click to expand...
Click to collapse
As did I...
Great review! I just bought the clear one.
LBN1 said:
+1 this is a good case for the money. My only issue was had to enlarge the hole for the charging micro usb port, for use with my charger.
Click to expand...
Click to collapse
yeah the hole is pretty small, the original charger i got when i bought my phone fits fine but alot of others it'll fit enough to charge but it's easy to dislodge :|
I just ordered mine off the same website. Thanks for posting this.
DKMikey said:
So I ended up wanting a MT4G case and came across this site through a friend who bought a similar case from ambitronic.com.
Wondering whether to get the TPU Fusion Case? Look no further!
Shipping:
The product came relatively fast. When I got my final order, all they allowed was first class shipping, but it was only about $3. I ordered my product on Saturday, was notified that it shipped out on Sunday, and it came on Tuesday afternoon.
The website said that it was "delivered" on Monday when I checked, but when I went to check the UPS tracking number it just said sorted. So if you're wondering why the case hasn't come, check the UPS site and be patient, it's worth it!
Pricing/Value:
This is where the product shines. The case was only $3.40, and I bought a $0.95 screen protector with it. I also used a promotional code that docked off 10%. Unfortunately, shipping was $2.95 (still not that bad for first-class), so my total came out to be $6.87.
The Product(s):
I bought two things:
The Black TPU Fusion Case, and
a MT4G Screen Protector
The case itself is pretty good. All the holes are in the right places, and it fits really well. It does not add any noticeable bulk, and although it was somewhat difficult to get it on my MT4G in the beginning, it gets easier as time goes. The side grips are really nice (they're textured for easier grip), and I have 99% confidence that I won't break my phone as long as I have this case (the other 1% is if I keep it in the washing machine ). I had an issue with the power button being too hard to press at the outset, but as time went by, the issue got better and it's much easier to hit the power button.
Note: The TPU Fusion cases for this product only come in Black (+$0.45), Clear (+$0.45), and Red. I got the black one, and it looks really sleek on my black MT4G.
Now, the screen protector on the other hand was not useful at all. The product said that it would come with a soft card, but it did not. The thing also did not come with any instructions, so I ended up having to check how to install it on XDA. After cleaning the glass screen with the microfiber cloth and applying the screen protector, there were too many air bubbles, and I realized that the screen protector collected dust quite easily. I ended up having to trash it.
Overall:
4.75/5
Great product, great company.
-0.15 for the worthless screen protector
-0.10 for only 1 shipping option (shipping ended up being about 45% of the cost, but it was relatively cheap, so I can't complain too much).
Get it here.
------------------------------------------------------------------------------------------------------------------------------------------
So I shot them an email, and here's what I got:
What great customer service!
Click to expand...
Click to collapse
Hey where did you get the 10% off code?
DKMikey said:
Great product, great company.
Click to expand...
Click to collapse
This review made me buy one ... good job
Lol, made me buy one also. I also read the extended battery thread and that made me buy one before I read this. Now I don't know which to put on unless I cut the case to fit the battery.
badboi_zero said:
Lol, made me buy one also. I also read the extended battery thread and that made me buy one before I read this. Now I don't know which to put on unless I cut the case to fit the battery.
Click to expand...
Click to collapse
Dam impulse buys LOL
Exactly. I may just cut the TPU case to fit the battery.
I did not like this case. I found it to added far too bulk to the phone.
However....I cut the top off of it and hot glued the case to the armrest in my car. (It looks clean I swear!) So now I have a great holder that my phone slides in and out of easily that keeps it nice and secure where I can see the screen to know who's calling before answering on the bluetooth.
It's a GREAT phoen case for this purpose. And I'm thrilled with my purchase.
Skipjacks said:
I did not like this case. I found it to added far too bulk to the phone.
However....I cut the top off of it and hot glued the case to the armrest in my car. (It looks clean I swear!) So now I have a great holder that my phone slides in and out of easily that keeps it nice and secure where I can see the screen to know who's calling before answering on the bluetooth.
It's a GREAT phoen case for this purpose. And I'm thrilled with my purchase.
Click to expand...
Click to collapse
Be interested to see how it looks.
Sent from my HTC Glacier using xda premium
I got a TPU Fusion case when I got my phone. I'm pretty pleased with it overall. The grips on the sides make the phone feel much more secure in my hand.
Thank you for your support. It is good to see people like this TPU Fusion design.
I bought a similar tpu, but the hole where u charge the phone was too little and cause of that i couldnt charge it well so i decided to throw it away
Sent from my HTC Glacier using xda premium
I guess the garbage can was closer than a knife.

who is using the free case?

I wasn't expecting to find a case with the phone package. But I quite like it, although I'm still on the look out for flip down leather case as I prefer those type of cases.
As it's plastic it'd scratch real easily plus without the case I'm scared to drop it
It all depends on how you handle your phone, and where u keep it while outside. I got the Olixar silicone case.
What's plastic?
I'm using the case provided in the box but as it's not clear(dotted surface), it masks off the excellent holographic effect. Looking to get other cases.
I'm using the free gel case that came in the box. I'm looking for something more long-term, but it isn't bad as a freebie from the manufacturer.
I remove the case as it increases the size of the phone in my pocket.
I've been using the free case and I like it a lot better than the clear silicone you usually find. It's really easy to clean and offers good protection.
Just got the phone yesterday. And i was suprised that mine didnt come with it. As every video stated it comes with one.
Don't know why, but there was no free case in my box(yes it was new, unopened, tape/plastic sealed package) I bought in legit place, in my mobile operator store.
Oh well... bought case from ali, next 2 weeks will be pain in the .... Untill it arrives. fingers crossed that i dont drop it anywhere.
Just recently got the view 20, is anyone able to recommend me a decent case or screen protector? The usual brands I go for seem to not support this device. Any help would be appreciated! Thanks

Categories

Resources