Develop Bugs

re-install touchflo?

i just tried to install a program to change the touchflo cube, touch settings by www.fatattitude.com, but now the 3 tab side is completely blank. is there any way to reinstall the touchflo software? i tried a soft reset and it didn't work. any suggestions?

if nothing else works, a hard-reset will get it back. note,however, that a hard-reset will return the phone to it's original state when you first got it. it will remove everything you loaded to/installed on the phone. perform a hard-reset: while holding down the 'green' and 'red' buttons perform a soft-reset. you'll get a message asking you to press the 'green' send key to verify you want to complete the hard-reset. good luck

Don't hard reset just yet.
gammarho55 said:
i just tried to install a program to change the touchflo cube, touch settings by www.fatattitude.com, but now the 3 tab side is completely blank. is there any way to reinstall the touchflo software? i tried a soft reset and it didn't work. any suggestions?
Click to expand...
Click to collapse
use a registry editor and make sure you have values for icon path in the folder HKEY_LOCAL_MACHINE>Software>HTC>Biotouch>MediaHubMini>App1_1 - App1_3

Musicman247 said:
use a registry editor and make sure you have values for icon path in the folder HKEY_LOCAL_MACHINE>Software>HTC>Biotouch>MediaHubMini>App1_1 - App1_3
Click to expand...
Click to collapse
when i use the registry editor, there are values there... but when i talked to sprint they said that there should be 6 different values in the HKEY_LOCAL_MACHINE>Software>HTC>Biotouch>MediaHubM ini folder... i only have 4? i have these values- app1_1,app1_2,app1_3 and media type. what am i missing? is there any way to get those missing values back?

Space Key not appear in Full Qwerty Keyboard

Hi all.
Suddenly, the "Space Key" does not appear in Full Qwerty Keyboard.
Now ".com" & "/" appear instead of "Space Key".
(plz see the attached file)
I want to change from ".com" & "/" to "Space Key",, how ever i don't know the way.
Could u give the solution?

i had exact same problem. apparently you have to do a registry change to fix it. HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Your variable might not be 1 but when my screen was as yours it was a 2. Laater it switched on its own to a 9 so dont lose this registry change because your probably going to have to do it again. I noticed when i added new contact or something to that effect it changed the variable

Thank you very much for your solution!
My "CurrentET9Style" is 6.
After revise from 6 to 0, Back to normal keyboard.
Thank you !!!
mjcole2003 said:
i had exact same problem. apparently you have to do a registry change to fix it. HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Your variable might not be 1 but when my screen was as yours it was a 2. Laater it switched on its own to a 9 so dont lose this registry change because your probably going to have to do it again. I noticed when i added new contact or something to that effect it changed the variable
Click to expand...
Click to collapse

Did you install the tweak cab from ppgeeks? if so, that is your issue. It was in the 1st post

thanks ,i think i get it.

supdawg said:
Did you install the tweak cab from ppgeeks? if so, that is your issue. It was in the 1st post
Click to expand...
Click to collapse
who's first post? I did install the tweak cab from ppcgeeks and would like to read that 1st post. If i uninstall the tweak will it fix the reacurring problem or do i have to hard reset? Thanks

when i changed to "autocomplete" I had the same problem with the space key being gone until i put the registry back the way it was...Tj

Keep CurrentET9Style = 0 ??
Changed HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
This works temporarily, but when I click on the time in a calendar entry, it switches to numbers, and does not switch back unless I re-edit the registry. Is there any way to keep the setting from changing at all? I want it to stay at CurrentET9Style = 0.
Anybody?

Hi everyone. Okay, first let me just say that the "FixStuckTP2Keyboard.cab" is fine and it does work. But it reverts your keyboard back to the "eT9" and you probably did a registry hack to change it from that in the first place (changed it to "COMP") am I right? Not to knock that cab, like I said it works just fine but I did NOT want to "install" a cab file everytime this happened (after it would change it back to "eT9" I would have to go back into the registry and change it to "COMP" again.)
Let me tell you HOW this is happening in the first place, it has something to do with Opera. You can test this very easily. First get your keyboard working properly, then open Opera. Type something in the address bar or just tap the address bar and BAM! Your keyboard is stuck in that mode. Now I don't know why this happens, that mode is getting stuck in memory for some strange reason and it will NOT let go.
I'm assuming this is ONLY happening to those of us who have used the registry (or a program or cab) to change the keyboard to "COMP" instead of "eT9" since changing it back to "eT9" solves the problem.
There are three solutions:
1.) ONLY use the slide-out keyboard when using Opera.
2.) Use the FixStuckTP2Keyboard.cab
3.) Use the MortScripts I created.
Use "KB-OFF (eT9).mscr" to force the "eT9" info into the registry. Then use "KB-ON (COMP).mscr" to enter the "COMP" info back into the registry, then do a soft reset.
You can rename these files if you like.
Yeah I know it sucks to have to do a reset just to get the use of your spacebar back just because you used the virtual keyboard when using Opera but hey, what are you gonna do?
UPDATE: Just noticed that "sometimes" my scripts don't work if you click on them one after another (again for some strange reason). If this happens to you just click on "KB-OFF" soft reboot then click on KB-ON" & reboot. Weird I know.

Text Message Sent Confirmation - How to disable?

Everytime I send a text message, it pops up a message letting you know that it was sent. It is extremely annoying. Is there anyway to turn it off? I went into the options and unchecked the boxes, but that didn't work.

BehindTheLight said:
Everytime I send a text message, it pops up a message letting you know that it was sent. It is extremely annoying. Is there anyway to turn it off? I went into the options and unchecked the boxes, but that didn't work.
Click to expand...
Click to collapse
Got under my skin too! Download CeRegEditor to your pc and sync your phone via WMDC run the CeRegEditor make connection within the program and go to tools and then unlock registry, then follow these keys HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings\ change key value SMSNoSentMSG to a value of 1. Save the edit and perform soft reset. Tada no more annoyance!!! If you dont like the thought of thumbing through your registry then you can find .cab file that will preform it for you. And also you can download other programs that for the life of me I cant think of right now and install them to change this and other settings on your phone. Just do a search and youll find them. Hope this helps!

ajolliff said:
Got under my skin too! Download CeRegEditor to your pc and sync your phone via WMDC run the CeRegEditor make connection within the program and go to tools and then unlock registry, then follow these keys HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings\ change key value SMSNoSentMSG to a value of 1. Save the edit and perform soft reset. Tada no more annoyance!!! If you dont like the thought of thumbing through your registry then you can find .cab file that will preform it for you. And also you can download other programs that for the life of me I cant think of right now and install them to change this and other settings on your phone. Just do a search and youll find them. Hope this helps!
Click to expand...
Click to collapse
Thanks for the reply. That sucks that you have to do all that to get rid of this annoyance. What were they thinking when they put this message confirmation in? Wow, what a mistake.

I am pretty sure that I used HD tweak to turn it off. 2.1 - Sent notification- disabled.
Very useful app as is Schapps Advanced Config tool. Both should be on your phone.

I use "Rhodium Settings Tool" by Tom_Condom. http://forum.xda-developers.com/showthread.php?t=549135 once installed go to menu>text massaging>notifications SMS sent

Only phone keypad for soft input options

I posted this on PPCGeeks a few days ago and got a few suggestions, but still no solution. I am posting here, as I think this is a generic problem and not CDMA specific.
This is on a Sprint Touch Pro 2 running the stock WM 6.5 MR2, and I haven't installed anything new in the last few days. When I try to reply to a text message, instead of the QWERTY keyboard, a phone-type keypad pops up. When I try to change it, sometimes only the keypad shows as an option as in the attached picture. Other times, I get all of the options, but selecting any QWERTY keyboard does nothing, and I am still stuck with the keypad.
The suggestions I have tried were to create blank softkb.dll and HTCSipSrvc.dll files and overwrite the originals in the \Windows directory, reboot, delete the empty files, and reboot again to force the ROM files to be used. These made no difference at all.
Any and all suggestions are appreciated.

Trying to solve this myself
will get back to you if I do

try this...
Go to: HKLM\System\CurrentControlSet\Control\layouts\e0010409
Edit:
Ime File = Change from \Windows\et9ime.dll to \Windows\compime.dll
Layout Text = change from ET9 IME to COMP IME
Go to: HKLM\Software\Tegic\eT9
Edit:
XT9SupportMSSip=0

kiint said:
Go to: HKLM\System\CurrentControlSet\Control\layouts\e0010409
Edit:
Ime File = Change from \Windows\et9ime.dll to \Windows\compime.dll
Layout Text = change from ET9 IME to COMP IME
Go to: HKLM\Software\Tegic\eT9
Edit:
XT9SupportMSSip=0
Click to expand...
Click to collapse
Sorry, but my settings were already the way you suggested.
I'm tempted to hard reset soon. I haven't had much luck with SPB Backup and am thinking of trying Sprite Backup. I'd like to hear opinions and experiences with either or both after a hard reset.

JimSmith94 said:
Sorry, but my settings were already the way you suggested.
I'm tempted to hard reset soon. I haven't had much luck with SPB Backup and am thinking of trying Sprite Backup. I'd like to hear opinions and experiences with either or both after a hard reset.
Click to expand...
Click to collapse
ah then I think you need to set everything back to the T9IME settings...try it before you hard reset!

Wow kiint, that fixed it and it didn't even need a reboot! Thanks!
To summarize:
Go to: HKLM\System\CurrentControlSet\Control\layouts\e0010409
Be sure these are set this way:
Ime File = \Windows\et9ime.dll
Layout Text = ET9 IME
Go to: HKLM\Software\Tegic\eT9
Set:
XT9SupportMSSip=0

glad it worked

Help, unable to change display & keyboard language

Hi guys, unable to change the display language (it always show automatic). Is there a way to solve this? Any help thanks.....

Restore default settings.
If it don't works you can do a hard reset.

Hi Soxix, thanks for your reply. I reset my CSC setting and now i am able to select my display & keyboard languages but things on phone memory is cleared also. Thanks again.....